Tender For Construction Of Repair & Renovation Work Bakri Hill Karmchari House Nagar Palika Mussoorie.07(Vijendear, Pardeep, Ompaal, Rajkumar, Jitendear, Rahul, Amit, Vinod, Foolkumar, Kishor, Vikram, Arjun, Ramshri, Rajendear, Mukesh, Inderpal, Sure
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Aug 2026
12 days left
EMD
1.65 Lakhs
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Repair & Renovation Work Bakri Hill Karmchari House Nagar Palika Mussoorie.07(Vijendear, Pardeep, Ompaal, Rajkumar, Jitendear, Rahul, Amit, Vinod, Foolkumar, Kishor, Vikram, Arjun, Ramshri, Rajendear, Mukesh, Inderpal, Suresh, Surendear, Karnsingh, Taslim) And Mr. Virendear Butola , Samma Rawat, Yhaspal Rawat, Ankit)
BOQ
| Sl. No. | Item Description |
| 1 | 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.15.7.4 In cement mortar |
| 2 | 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.15.2.2 Nominal concrete 1:4:8 or leaner mix (including equivalent |
| 3 | 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 4 | 2.8 Earth work in excavation by mechanical means (Hydraulic excavator)Imanual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, for all lift, including getting out the excavated soil and disposalof surplus excavated soil as directed, within a lead of 50 m.2.8.1Allkinds of soil. |
| 5 | 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level:1:4:8 (1 cement : 4 manufactured sand derived fromRecycled Concrete Aggregate (RCA): 8 graded stoneaggregate 40 mm nominal size Recycled Aggregate (RA))4.1.8A |
| 6 | 4.1 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor et., up to floor five level, excluding the cost of centering, shutteringand finishing:1:3:6 (1 cement: 3 coarse sand (zone-I) derived fromnatural sources: 6 graded stone aggregate 20mm nominalsize derived from natural sources)4.2.5 |
| 7 | 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor et., up to floor five level, excluding the cost of centering, shutteringand finishing:1:3:6 (1 cement: 3 coarse sand (zone-I) derived fromnatural sources: 6 graded stone aggregate 20mm nominalsize derived from natural sources)4.2.5 |
| 8 | 4.3 Centering and shuttering including strutting, propping etc. and removal 4.3.2 of formwork for:Retainingwalls, return walls, walls (any thickness)including attached pilasters, buttresses, plinth and stringCourses fillets, kerbs and steps etc. |
| 9 | 5.3 AReinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies ,shelves, chajjas, lintels, bands, plain window sills ,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering , finishing andreinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-lll) derivedfrom natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
| 10 | 5.9 Centering and shuttering including strutting, propping etc. and removal of form for5.9.5Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | 4.11 Providing and laying damp-proof course 50 mm thick with cementconcrete 1:2:4 (1 cement:2 coarse sand (zone-|l) derived from naturalsources:4 graded stone aggregate 20 mm nominal size derived fromnatural sources). |
| 12 | 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level:4.1.41:2:4 (1 Cement :2 coarse sand (zone-lll) derived fromnatural sources :4 graded stone aggregate 40 mm nominalsize derived from natural sources) |
| 13 | 5.22 Steel reinforcement for R.C.C. work including straightening, cutting. bending, placing in position and binding all complete upto plinth 5.22.1 level.Mild steel and Medium Tensile steel bars |
| 14 | 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) 6.4.2 |
| 15 | 13.1 15 mm cement plaster on the rough side of single or half brick wall of mix13.2.1 1:4 (1 cement: 4 fine sand) |
| 16 | 9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.9.3.1.Sal wood |
| 17 | 10.14 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb,lock jamb,bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer in-charge:Fixing with adjustable lugs with split end tail toeach jamb10.14.1.1 |
| 18 | 26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 19 | 9.27 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws:9.27.1.1.2KilnSeasonedandchemically treated hollockWOod |
| 20 | 9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 9.63.1 250x10 mm |
| 21 | 9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts 300x16 mm 250x16 mm and screws etc. complete (Copper oxidised as per IS 1378)9.62.1300x16 mm |
| 22 | 10.29 providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts 10.29.1complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4mm aperture on both sides |
| 23 | 10.3 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :10.30.25.5 mm thick glass panes |
| 24 | 11.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 25 | 11.2 Chequerredprecast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of tiles, including rubbing and cleaning etc. complete, on 2011.20.1mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Light shade pigment using white cement |
| 26 | 8.31 Providing and fixing lst quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in allcolours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | 9.124.2 5 mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriate design shape and size as per manufacturer's specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Decorative type. |
| 28 | 8.1 Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement:3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement :2 marble dust) with an admixture of pigment to match the marble shade (To be secured 8.1.1 to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm |
| 29 | 13.8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 30 | 13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 31 | 13.48 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 32 | 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 33 | 10.25 Steel work welded in built up sections/ framed work, including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer using structural steeletc. as required.In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works10.25.2 |
| 34 | 12.5 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of thesheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 35 | 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete:12.51.1 Ridges plain (500- 600mm) |
| 36 | 12.51.6 Gutter (600 mm over all girth) |
| 37 | 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermalexpansion, () 12.41.1 Single socketed pipes.75 mm diameter |
| 38 | 12.41.2 110 mm diameter12.42 Providingand fixing on wall face unplasticised- PVCmoulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS 12.42.1 :13592 Type A, including jointingwith seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 39 | Single tee with door75x75x75 mm |
| 40 | 110x110x110 mm |
| 41 | Single tee without door75x75x75 mm |
| 42 | 110x110x110 mm |
| 43 | Bend 87.5°75x75x75 mm |
| 44 | 110x110x110 mm |
| 45 | Shoe (Plain)75x75x75 mm |
| 46 | 110x110x110 mm |
| 47 | 12.38 Providing and fixing M.S. holder bat clamps of approved design to C.l. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4mix (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. :100 mm diameter |
| 48 | 150 mm diameter |
| 49 | 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 50 | 17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.17.18.1 10 litre capacity - White |
| 51 | 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 52 | 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 53 | 17.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required17.10.2 Kitchen sink without drain board17.10.2.1 610x510 mm bowl depth 200 mm |
| 54 | 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 40 mm dia |
| 55 | 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 56 | 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.49.1 15 mm nominal bore |
| 57 | 18.5 Providing and fixing C.P. brass long nose stop bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 18.50.1 15 mm nominal bore |
| 58 | 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15 mm nominal bore |
| 59 | 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 15 mm nominal dia Pipes |
| 60 | 20 mm nominal dia Pipes |
| 61 | 18.33 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 62 | 1.3 wiring for light point/fan point /exhaust fan point/cell bell point with 1.5sq.mm FRLSPVC insulated copper conductor single core cabele in surface/recessed steel conduit with modular switch moduler palte suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.1.3.1 |
| 63 | 1.5 wiring for light /power plug point with 2*4sq.mm FRLS PVC insulated copper conductor single core cabele in surface/recessed steel conduit along with 1 no 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing etc. as required. |
| 64 | 2.3 supplying and fixing following way single pole and neutral sheet steel mcb distribution board 240v on surface recess complete with tinned copper bus bar neutral bus bar earth bar din bar interconnections powder painted including earthing etc,. As required ( but without mcb/rccb isolator) 2.3.16way double door |
| 65 | SOR 1.1 Loading and Unloading of Lime, Aggregate, Stone Boulder, Brick Aggregate, Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work by Manual Means Loading of Lime, Aggregate, Stone Boulder, Brick Aggregate, Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work by manual means including a lead upto 30 m |
| 66 | SOR 2.1 Cement plumMasonrywith 40%plum& 60%1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completionof thework.asperdrawingsandtechnicalspecificationsClause 802, 803, 1202 & 1203 of MORD Specifiction Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender