Defence Government Departments Closing in 19 days TDR #56682192

Bids Are invited for Repair And Overhauling Service - Rc For Repair Overhauling Of Electrical Boat Davit For In Ships; Any Other Suitable Brand; Yes; Buyer Premises - Corvette Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit Fr

Issued by Government Departments · Visakhapatnam, Andhra Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Aug 2026
19 days left
EMD
21.51 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatnam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Repair And Overhauling Service - Rc For Repair Overhauling Of Electrical Boat Davit For In Ships; Any Other Suitable Brand; Yes; Buyer Premises - Corvette Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Corvette Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Corvette Class.Whole Single Arm Boat Davit: Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken , Corvette Class.Luffing Gear Box: Dismantling, Defect Identification And Overhauling Of Luffing Gear Box: Which Includes Replacement Of Worn-Out / Damaged Bearings, Screw Shaft, Gears, Pinions, Shafts Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals,Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators, Oil Drain Plug And Fasteners:Ensure For No Oil Lekage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Repair Accordingly: Qc To Be Offeref Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails (Which Includes Load Trails) , Corvette Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Corvette Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Corvette Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism & Manual Hand Operation: Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Corvette Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Corvette Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Corvette Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Corvette Class.After Completion Of Load Test, Re-Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: If Any Flaws Observed Those Flaws Must Be Examined By Ndt Techniques And Accordingly Carry Out Repairs As Necessary And Reoffer To Load Testing Like Wise: , Lst Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Lst Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Lst Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Lst Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Lst Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Lst Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism : Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Lst Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Lst Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Lst Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Lst Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retesting Like Wise: , Delhi Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Delhi Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Delhi Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Delhi Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Delhi Class.Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Delhi Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism : Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Delhi Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Delhi Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Delhi Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Delhi Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Reoffer To Load Testing Like Wise: , Opv Class.Degutting/ Regutting Of The Davit Gear Box From/ To Foudation And Dismantling Of Davit Gear Box For Survey Or Inspection And Gauging Of Its Parts:While Regutting The Davit Suitable Ht Bolts Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation , Opv Class.Hydro Blasting Of Entire Gear Box Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Opv Class.Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Opv Class.Reduction Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Luffing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Screws Shaft, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Opv Class.Charge Oil In Gear Boxes With Servo Gear Oil 140: Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Opv Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Opv Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Opv Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retest , Bangaram Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Bangaram Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Bangaram Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Bangaram Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Bangaram Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Bangaram Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism & Manual Hand Operation: Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Bangaram Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Bangaram Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Bangaram Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Bangaram Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retesting Like Wise: , Ammunition/Gemini Davit.Degutting/ Regutting Of Theammunition/Gemini Davit From/ To Foudation And Dismantling Of Davit For Survey Or Inspection And Gauging Of Its Parts: While Re Gutting The Davit Suitable Ht Bolts Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Ammunition/Gemini Davit.Hydro Blasting / Sand Blasting Of Entire Davit Structure And Sub-Assemblies To Remove Paint And Attain At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes Etc , Ammunition/Gemini Davit.Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required: , Ammunition/Gemini Davit.Gear Box : Dismantling, Defect Identification, And Overhauling Of Gear Box And Ratchet Mechanism, Operating Handle End Pulleys/Guiding Pulleys, Springs And Its Bush Bearings All Gears / Sector Gears, Springs Operating Handle, Pulleys To Be Cleaned From Rust And Inspected Same To Be Replaced/ Renewed If Necessary: Qc To Be Offerd Before And After Assembly: , Ammunition/Gemini Davit.Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Ammunition/Gemini Davit.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Ammunition/Gemini Davit.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Ammunition/Gemini Davit.After Completion Of Load Test, Re- Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: If Any Flaws Observed Those Flaws Must Be Examined By Ndt Techniques And Accordingly Carry Out Repairs As Necessary And Reoffer Tp Load Testing Like Wise: , Mandatory Spares.Corvet Class.7481240.Oil Level Indicator , Mandatory Spares.Corvet Class.7481250.Drain Plug , Mandatory Spares.Corvet Class.7481270.Worm Shaft , Mandatory Spares.Corvet Class.7481271.Key , Mandatory Spares.Corvet Class.7481280.Taper Roller Bearing , Mandatory Spares.Corvet Class.7481315.Oil Seal , Mandatory Spares.Corvet Class.7481340.Worm Wheel , Mandatory Spares.Corvet Class.7481370.Worm Shaft , Mandatory Spares.Corvet Class.7481380.Taper Roller Bearing , Mandatory Spares.Corvet Class.7481430.Worm Wheel , Mandatory Spares.Corvet Class.7481450.Main Shaft , Mandatory Spares.Corvet Class.7481460.Ball Bearing , Mandatory Spares.Corvet Class.7481485.Oil Seal , Mandatory Spares.Corvet Class.7481511.Allen Bolt , Mandatory Spares.Corvet Class.7482220.Coupling , Mandatory Spares.Corvet Class.748235.Oil Seal , Mandatory Spares.Corvet Class.7482350.Oil Level Indicator , Mandatory Spares.Corvet Class.7482370.Worm Shaft , Mandatory Spares.Corvet Class.7482380.Taper Roller Bearing , Mandatory Spares.Corvet Class.7482435.Oil Seal , Mandatory Spares.Corvet Class.7482460.Worm Wheel , Mandatory Spares.Corvet Class.7482470.Worm Shaft , Mandatory Spares.Corvet Class.7482480.Taper Roller Bearing , Mandatory Spares.Corvet Class.7482540.Bearing , Mandatory Spares.Corvet Class.7482560.Main Shaft , Mandatory Spares.Corvet Class.7482610.Pinion , Mandatory Spares.Corvet Class.7482752.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483290.Oil Level Indicator , Mandatory Spares.Corvet Class.7483300.Drain Plug , Mandatory Spares.Corvet Class.7483320.Worm Shaft , Mandatory Spares.Corvet Class.7483330.Taper Roller Bearing , Mandatory Spares.Corvet Class.7483352.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483361.Packing , Mandatory Spares.Corvet Class.7483362.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483365.Oil Level Indicator , Mandatory Spares.Corvet Class.7483390.Worm Wheel , Mandatory Spares.Corvet Class.7483420.Worm Shaft , Mandatory Spares.Corvet Class.7483430.Taper Roller Bearing , Mandatory Spares.Corvet Class.7486480.Worm Wheel , Mandatory Spares.Corvet Class.7483500.Main Shaft , Mandatory Spares.Corvet Class.7483510.Ball Bearing , Mandatory Spares.Corvet Class.7483535.Oil Seal , Mandatory Spares.Corvet Class.7483625.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7484201.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7484240.Slewing Ring , Mandatory Spares.Corvet Class.7485201.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7485260.Bush Bearing , Mandatory Spares.Corvet Class.7485305.Grease Nipple , Mandatory Spares.Corvet Class.7485350.Bush Bearing , Mandatory Spares.Corvet Class.7485360.Thrust Washer , Mandatory Spares.Corvet Class.7485531.Grease Nipple , Mandatory Spares.Corvet Class.7485720.Sheave , Mandatory Spares.Corvet Class.7485730.Bush Bearing , Mandatory Spares.Corvet Class.7485751.Grease Nipple , Mandatory Spares.Corvet Class.Hew/P-302/Emb-Size 18/9.Spring Washer For Brake Mounting Screw , Mandatory Spares.Corvet Class.7483500A.Screw Shaft , Mandatory Spares.Lst Class.Gew040661754262280.Adapter For Oil Level Indicator , Mandatory Spares.Lst Class.Gew040661754262284.Oil Level Indicator , Mandatory Spares.Lst Class.Gew040661754262290.Adaptor For Drain Plug , Mandatory Spares.Lst Class.Gew040661754262295.Drain Plug , Mandatory Spares.Lst Class.Gew040661754262340.Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262350.Taper Roller Bearing , Mandatory Spares.Lst Class.Gew040661754262360.Bearing Housing Cover , Mandatory Spares.Lst Class.Gew040661754262365.Oil Seal , Mandatory Spares.Lst Class.Gew040661754262410.1St Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262420.Pimion Shaft , Mandatory Spares.Lst Class.Gew040661754262440.Ball Bearing - 6214 , Mandatory Spares.Lst Class.Gew040661754262452.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262462.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262480.Main Shaft , Mandatory Spares.Lst Class.Gew040661754262510.Ball Bearing - 6217 , Mandatory Spares.Lst Class.Gew040661754262522.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262540.Pinion , Mandatory Spares.Lst Class.Gew040661754262550.2Nd Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262551.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262581.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754262600.Idler Gear , Mandatory Spares.Lst Class.Gew040661754262610.Ball Bearing 6212 - 2Rs1 , Mandatory Spares.Lst Class.Gew040661754262630.Shaft For Idle Gear , Mandatory Spares.Lst Class.Gew040661754262681.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754262682.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754261330.Ball Bearing , Mandatory Spares.Lst Class.Gew040661754261360.Dog Clutch , Mandatory Spares.Lst Class.Gew040661754261370.Shifter Ring In Hlaves , Mandatory Spares.Lst Class.Gew040661754261385.Hex:Bolt Nut & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754261390.Clutch Engaging Dis Engaging Lever , Mandatory Spares.Lst Class.Gew040661754261400.Bush Bearing , Mandatory Spares.Lst Class.Gew040661754261412.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261421.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261460.Pinion Shaft , Mandatory Spares.Lst Class.Gew040661754261461.Grease Nipple , Mandatory Spares.Lst Class.Gew040661754261483.Oil Seal 80 X 100 X 10 , Mandatory Spares.Lst Class.Gew040661754261490.Ball Bearing Sealed 6212-2Rs1 , Mandatory Spares.Lst Class.Gew040661754261500.Brake Disc , Mandatory Spares.Lst Class.Gew040661754261501.Key , Mandatory Spares.Lst Class.Gew040661754261502.Circlip External , Mandatory Spares.Lst Class.Gew040661754261526.Rivet , Mandatory Spares.Lst Class.Gew040661754261530.Spring , Mandatory Spares.Lst Class.Gew040661754261540.Eccentric , Mandatory Spares.Lst Class.Gew040661754261541.Oil Seal 50 X 65 X 7 , Mandatory Spares.Lst Class.Gew040661754261562.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261595.Lining , Mandatory Spares.Lst Class.Gew040661754261596.Rivet , Mandatory Spares.Lst Class.Gew040661754261630.Dead Man Brake , Mandatory Spares.Lst Class.Gew040661754261660.Pinion Shaft , Mandatory Spares.Lst Class.Gew040661754261671.Key , Mandatory Spares.Lst Class.Gew040661754261680.Ball Bearing 6212 , Mandatory Spares.Lst Class.Gew040661754261685.Ball Bearing 6213 , Mandatory Spares.Lst Class.Gew040661754261692.Csk Screw , Mandatory Spares.Lst Class.Gew040661754261740.Ball Bearing 6224 , Mandatory Spares.Lst Class.Gew040661754261765.Oil Seal 120 X 150 X 12 , Mandatory Spares.Lst Class.Gew040661754261772.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261795.Rope Cl , Mandatory Spares.Lst Class.Gew040661754261796.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754261801.Hex Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261495.O Ring , Mandatory Spares.Lst Class.Gew040661754261506.Csk Screw , Mandatory Spares.Delhi Class.7351510.Eccentric , Mandatory Spares.Delhi Class.7353340.Bush Bearing , Mandatory Spares.Delhi Class.7352320.Taper Roller Bearing , Mandatory Spares.Delhi Class.7351255.Ball Bearing , Mandatory Spares.Delhi Class.7351290.Ball Bearing , Mandatory Spares.Delhi Class.7351300.Ball Bearing , Mandatory Spares.Delhi Class.7352620.Ball Bearing , Mandatory Spares.Delhi Class.7352630.Ball Bearing , Mandatory Spares.Delhi Class.7352420.Ball Bearing , Mandatory Spares.Delhi Class.7351650.Ball Bearing , Mandatory Spares.Delhi Class.7351655.Ball Bearing , Mandatory Spares.Delhi Class.7351710.Ball Bearing , Mandatory Spares.Delhi Class.7351496.Rivet , Mandatory Spares.Delhi Class.7351566.Rivet , Mandatory Spares.Delhi Class.7351495.Brake Lining , Mandatory Spares.Delhi Class.7351565.Brake Lining , Mandatory Spares.Delhi Class.7351490.Brake Shoe , Mandatory Spares.Delhi Class.7351385.Oil Seal , Mandatory Spares.Delhi Class.7351452.Oil Seal , Mandatory Spares.Delhi Class.7351511.Oil Seal , Mandatory Spares.Delhi Class.7351735.Oil Seal , Mandatory Spares.Delhi Class.7352475.Oil Seal , Mandatory Spares.Delhi Class.7351330.Clutch , Mandatory Spares.Delhi Class.7351766.Allen Bolts + Washers , Mandatory Spares.Delhi Class.7352711.Allen Bolts + Washers , Mandatory Spares.Delhi Class.7351742.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351212.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351732.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351331.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351382.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7352713.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7352752.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351201.Hex Bolt + Nut + Sp: Washer , Mandatory Spares.Delhi Class.7351102.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351431.Graese Nipples , Mandatory Spares.Delhi Class.7352710.Slewing Bearing , Mandatory Spares.Delhi Class.7352670.Pinion , Mandatory Spares.Delhi Class.7351225.Oil Level Indicator , Mandatory Spares.Delhi Class.7351230.Drain Plug , Mandatory Spares.Opv Class.1754262280-1.Adaptor For Oil Level Indicator , Mandatory Spares.Opv Class.1754262280-2.Oil Level Indicator , Mandatory Spares.Opv Class.1754262280-3.Adaptor For Drain Plug , Mandatory Spares.Opv Class.1754262280-4.Drain Plug , Mandatory Spares.Opv Class.1754262280-5.Pinoin Shaft , Mandatory Spares.Opv Class.1754262280-6.Tapper Roller Bearing , Mandatory Spares.Opv Class.1754262280-7.Bearing Housing Cover , Mandatory Spares.Opv Class.1754262280-8.Oil Seal , Mandatory Spares.Opv Class.1754262280-9.Pinoin Shaft , Mandatory Spares.Opv Class.1754262280-10.Gear Wheel , Mandatory Spares.Opv Class.1754262280-11.Ball Bearing , Mandatory Spares.Opv Class.1754262280-12.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-13.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-14.Main Shaft , Mandatory Spares.Opv Class.1754262280-15.Ball Bearing , Mandatory Spares.Opv Class.1754262280-16.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-17.Pinion & Shaft , Mandatory Spares.Opv Class.1754262280-18.Gear Wheel & Shaft , Mandatory Spares.Opv Class.1754262280-19.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-20.Tapper Roller Bearing , Mandatory Spares.Opv Class.1754262280-21.Shaft For Idle Gear , Mandatory Spares.Opv Class.1754262280-22.Ball Bearing , Mandatory Spares.Opv Class.1754262280-23.Dog Clutch , Mandatory Spares.Opv Class.1754262280-24.Hex:Bolt Nut & Sp:Washer , Mandatory Spares.Opv Class.1754262280-25.Clutch Engaging Lever , Mandatory Spares.Opv Class.1754262280-11.Bush Bearing , Mandatory Spares.Opv Class.1754262280-121.Oil Seal 50 X 65 X 7 , Mandatory Spares.Opv Class.1754262280-13.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-15.Lining , Mandatory Spares.Opv Class.1754262280-12.Rivet , Mandatory Spares.Opv Class.1754262280-14.Dead Man Brake , Mandatory Spares.Opv Class.1754262280-16.Pinion Shaft , Mandatory Spares.Opv Class.1754262280-111.Key , Mandatory Spares.Opv Class.1754262280-112.Ball Bearing , Mandatory Spares.Opv Class.1754262280-135.Ball Bearing , Mandatory Spares.Opv Class.1754262280-125.Csk Screw , Mandatory Spares.Opv Class.1754262280-122.Ball Bearing , Mandatory Spares.Opv Class.1754262280-120.Oil Seal 120 X 150 X 12 , Mandatory Spares.Opv Class.1754262280-132.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-114.Rope Cl , Mandatory Spares.Bangaram Class.1:02048:025.Bearing , Mandatory Spares.Bangaram Class.1:02048:026.Bearing , Mandatory Spares.Bangaram Class.1:02048:027.Bearing , Mandatory Spares.Bangaram Class.1:02048:028.Bearing , Mandatory Spares.Bangaram Class.1:02048:029.Bearing , Mandatory Spares.Bangaram Class.1:02046:012.Bearing , Mandatory Spares.Bangaram Class.1:02085:022.Bearing , Mandatory Spares.Bangaram Class.1:02051:040.Bearing , Mandatory Spares.Bangaram Class.1:02051:041.Bearing , Mandatory Spares.Bangaram Class.1:02051:042.Bearing , Mandatory Spares.Bangaram Class.1:02051:54.Oil Seal , Mandatory Spares.Bangaram Class.1:02051:062.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:030.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:031.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:032.Oil Seal , Mandatory Spares.Bangaram Class.1:02051:069.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:052.Oil Seal , Mandatory Spares.Bangaram Class.1:02045:005.Worm Wheel , Mandatory Spares.Bangaram Class.1:02045:006.Worm Shaft , Mandatory Spares.Bangaram Class.2:02048:025.Internal Circlip , Mandatory Spares.Bangaram Class.2:02048:026.External Circlip , Mandatory Spares.Bangaram Class.2:02048:028.Drain Plug , Mandatory Spares.Bangaram Class.2:02048:029.Oil Level Indicator , Mandatory Spares.Bangaram Class.2:02046:012.Csk Screw , Mandatory Spares.Bangaram Class.2:02085:022.Split Pin , Mandatory Spares.Bangaram Class.2:02051:040.Spring , Mandatory Spares.Bangaram Class.2:02051:041.External Circlip , Mandatory Spares.Bangaram Class.2:02051:069-2.Pinion Gear , Mandatory Spares.Bangaram Class.2:02048:052-3.Pinion Gear Shaft , Mandatory Spares.Bangaram Class.2:02051:54.O Ring , Mandatory Spares.Bangaram Class.2:02051:62.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:30.Socket Hd Csk Screw , Mandatory Spares.Bangaram Class.2:02048:31.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:32.Socket Hd Bolt , Mandatory Spares.Bangaram Class.2:02051:069.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:052.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02045:005.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02045:006.Bush Bearing , Mandatory Spares.Bangaram Class.2:02048:032-1.Thrust Ball Bearing , Mandatory Spares.Bangaram Class.2:02045:006A.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02048:052B.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02045:005C.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02045:0060.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02051-069-2A.Pinion Gear , Mandatory Spares.Bangaram Class.2:02048-052-3A.Pinion Gear Shaft , Mandatory Spares.Bangaram Class.1:02045-001A.Worm Wheel For Secondary Gear Box , Mandatory Spares.Bangaram Class.1:02045-001B.Worm Shaft For Secondary Gear Box , Mandatory Spares.Bangaram Class.1:02045-009A.Cylindrical Rollers , Mandatory Spares.Ammunition/Gemini Davit.162280-1.Spring , Mandatory Spares.Ammunition/Gemini Davit.162280-2.Ratchet , Mandatory Spares.Ammunition/Gemini Davit.162280-3.Gear/Sector Gear/Pinion , Mandatory Spares.Ammunition/Gemini Davit.162280-4.Bush Bearing , Mandatory Spares.Ammunition/Gemini Davit.162280-5.Foundation Bolts/ Nuts/ Washers , Mandatory Spares.Ammunition/Gemini Davit.162280-6.Locking Pin And Chain

BOQ

Sl. No. Item TitleItem Description
1CORVETTE CLASS.WHOLE SINGLE ARM BOAT DAVIT: Degutting/ Regutting of entire davit from/ to foundation, Separation/ detachment arm and vertical column, de-coupling of motors and gear boxes and dismantling of its sub-assemblies: While re-gutting the davit suitable HT bolts may be used and proper care to be taken whilst tightening the davit to the foundation:CORVETTE CLASS.WHOLE SINGLE ARM BOAT DAVIT: Degutting/ Regutting of entire davit from/ to foundation, Separation/ detachment arm and vertical column, de-coupling of motors and gear boxes and dismantling of its sub-assemblies: While re-gutting the davit suitable HT bolts may be used and proper care to be taken whilst tightening the davit to the foundation:
2CORVETTE CLASS.WHOLE SINGLE ARM BOAT DAVIT: Hydro Blasting of entire davit structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:CORVETTE CLASS.WHOLE SINGLE ARM BOAT DAVIT: Hydro Blasting of entire davit structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:
3CORVETTE CLASS.WHOLE SINGLE ARM BOAT DAVIT: Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertakenCORVETTE CLASS.WHOLE SINGLE ARM BOAT DAVIT: Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken
4CORVETTE CLASS.LUFFING GEAR BOX: Dismantling, defect identification and Overhauling of Luffing Gear box: Which includes replacement of worn-out / damaged bearings, Screw shaft, gears, Pinions, shafts bearing end covers, inspection covers, bushes, circlips, oil seals,Washers/ Spring washers/ Thrust washers, oil level indicators, oil drain plug and fasteners:Ensure for no oil lekage from gear box and its seals, any evidence of oil leakage, repair accordingly: QC to be offeref each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails (which includes load trails)CORVETTE CLASS.LUFFING GEAR BOX: Dismantling, defect identification and Overhauling of Luffing Gear box: Which includes replacement of worn-out / damaged bearings, Screw shaft, gears, Pinions, shafts bearing end covers, inspection covers, bushes, circlips, oil seals,Washers/ Spring washers/ Thrust washers, oil level indicators, oil drain plug and fasteners:Ensure for no oil lekage from gear box and its seals, any evidence of oil leakage, repair accordingly: QC to be offeref each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails (which includes load trails)
5CORVETTE CLASS.HOISTING/LOWERING GEAR BOX AND ITS WINCH: Dismantling, defect identification and overhauling of Hoisting/Lowering Gear box and its winch: Which includes replacement of worn out/ damaged bearings, gears, pinions, shafts, bearing end covers, inspection covers,bushes, circlips, oil seals, washers/ spring washers/ thrust washers, deadman weight/counter weight, oil level indicators, oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage ,repair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)CORVETTE CLASS.HOISTING/LOWERING GEAR BOX AND ITS WINCH: Dismantling, defect identification and overhauling of Hoisting/Lowering Gear box and its winch: Which includes replacement of worn out/ damaged bearings, gears, pinions, shafts, bearing end covers, inspection covers,bushes, circlips, oil seals, washers/ spring washers/ thrust washers, deadman weight/counter weight, oil level indicators, oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage ,repair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
6CORVETTE CLASS.SLEWING ARRANGEMENT & SLEWING GEAR BOX: Dismantling, defect identifiaction and overhauling of slewing gear box: Which includes replacement of worn out / damages bearings, gears, slewing ring gear (if installed), pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, Cylindrical rollers, worn wheel & worm shaft, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)CORVETTE CLASS.SLEWING ARRANGEMENT & SLEWING GEAR BOX: Dismantling, defect identifiaction and overhauling of slewing gear box: Which includes replacement of worn out / damages bearings, gears, slewing ring gear (if installed), pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, Cylindrical rollers, worn wheel & worm shaft, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
7CORVETTE CLASS.CLUTCH CUM COUPLING, CENTRIFUGAL BRAKE UNIT,ENGAGING AND DIS-ENGAGING MECHANISM & MANUAL HAND OPERATION: Dismantling, defect identification and overhauling of clutch cum coupling, centrifugal brake unit, engaging and dis-engaging mechanism: Which includes replacement/repair of clutch plates: QC to be offered before and after assembly:CORVETTE CLASS.CLUTCH CUM COUPLING, CENTRIFUGAL BRAKE UNIT,ENGAGING AND DIS-ENGAGING MECHANISM & MANUAL HAND OPERATION: Dismantling, defect identification and overhauling of clutch cum coupling, centrifugal brake unit, engaging and dis-engaging mechanism: Which includes replacement/repair of clutch plates: QC to be offered before and after assembly:
8CORVETTE CLASS.Charge oil in gear boxes with Servo Gear oil 140 or as specified in the OEM Manual:Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:CORVETTE CLASS.Charge oil in gear boxes with Servo Gear oil 140 or as specified in the OEM Manual:Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:
9CORVETTE CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:CORVETTE CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:
10CORVETTE CLASS.Document all activities undertaken with time and spares consumed and submit the same:CORVETTE CLASS.Document all activities undertaken with time and spares consumed and submit the same:
11CORVETTE CLASS.After completion of load test, re-examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: If any flaws observed those flaws must be examined by NDT techniques and accordingly Carry out repairs as necessary and reoffer to load testing like wise:CORVETTE CLASS.After completion of load test, re-examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: If any flaws observed those flaws must be examined by NDT techniques and accordingly Carry out repairs as necessary and reoffer to load testing like wise:
12LST CLASS.WHOLE SINGLE ARM BOAT DAVIT: Degutting/ Regutting of entire davit from/ to foundation, Separation/ detachment arm and vertical column, de-coupling of motors and gear boxes and dismantling of its sub-assemblies: While re-gutting the davit suitable HT bolts may be used and proper care to be taken whilst tightening the davit to the foundation:LST CLASS.WHOLE SINGLE ARM BOAT DAVIT: Degutting/ Regutting of entire davit from/ to foundation, Separation/ detachment arm and vertical column, de-coupling of motors and gear boxes and dismantling of its sub-assemblies: While re-gutting the davit suitable HT bolts may be used and proper care to be taken whilst tightening the davit to the foundation:
13LST CLASS.WHOLE SINGLE ARM BOAT DAVIT: Hydro Blasting of entire davit structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:LST CLASS.WHOLE SINGLE ARM BOAT DAVIT: Hydro Blasting of entire davit structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:
14LST CLASS.WHOLE SINGLE ARM BOAT DAVIT:Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken:LST CLASS.WHOLE SINGLE ARM BOAT DAVIT:Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken:
15LST CLASS.HOISTING/LOWERING GEAR BOX AND ITS WINCH: Dismantling, defect identification and overhauling of Hoisting/Lowering Gear box and its winch: Which includes replacement of worn out/ damaged bearings, gears, pinions, shafts, bearing end covers, inspection covers,bushes, circlips, oil seals, washers/ spring washers/ thrust washers, deadman weight/counter weight, oil level indicators, oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage ,repair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)LST CLASS.HOISTING/LOWERING GEAR BOX AND ITS WINCH: Dismantling, defect identification and overhauling of Hoisting/Lowering Gear box and its winch: Which includes replacement of worn out/ damaged bearings, gears, pinions, shafts, bearing end covers, inspection covers,bushes, circlips, oil seals, washers/ spring washers/ thrust washers, deadman weight/counter weight, oil level indicators, oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage ,repair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
16LST CLASS.SLEWING ARRANGEMENT & SLEWING GEAR BOX: Dismantling, defect identifiaction and overhauling of slewing gear box: Which includes replacement of worn out / damages bearings, gears, slewing ring gear (if installed), pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, Cylindrical rollers, worn wheel & worm shaft, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)LST CLASS.SLEWING ARRANGEMENT & SLEWING GEAR BOX: Dismantling, defect identifiaction and overhauling of slewing gear box: Which includes replacement of worn out / damages bearings, gears, slewing ring gear (if installed), pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, Cylindrical rollers, worn wheel & worm shaft, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
17LST CLASS.CLUTCH CUM COUPLING, CENTRIFUGAL BRAKE UNIT,ENGAGING AND DIS-ENGAGING MECHANISM : Dismantling, defect identification and overhauling of clutch cum coupling, centrifugal brake unit, engaging and dis-engaging mechanism: Which includes replacement/repair of clutch plates: QC to be offered before and after assembly:LST CLASS.CLUTCH CUM COUPLING, CENTRIFUGAL BRAKE UNIT,ENGAGING AND DIS-ENGAGING MECHANISM : Dismantling, defect identification and overhauling of clutch cum coupling, centrifugal brake unit, engaging and dis-engaging mechanism: Which includes replacement/repair of clutch plates: QC to be offered before and after assembly:
18LST CLASS.Charge oil in gear boxes with Servo Gear oil 140 or as specified in the OEM Manual:Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:LST CLASS.Charge oil in gear boxes with Servo Gear oil 140 or as specified in the OEM Manual:Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:
19LST CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:LST CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:
20LST CLASS.Document all activities undertaken with time and spares consumed and submit the same:LST CLASS.Document all activities undertaken with time and spares consumed and submit the same:
21LST CLASS.After completion of load test, examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: Suspectd flaws must be examined by NDT techniques: Carry out repairs as necessary and retesting like wise:LST CLASS.After completion of load test, examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: Suspectd flaws must be examined by NDT techniques: Carry out repairs as necessary and retesting like wise:
22DELHI CLASS.WHOLE SINGLE ARM BOAT DAVIT: Degutting/ Regutting of entire davit from/ to foundation, Separation/ detachment arm and vertical column, de-coupling of motors and gear boxes and dismantling of its sub-assemblies: While re-gutting the davit suitable HT bolts may be used and proper care to be taken whilst tightening the davit to the foundation:DELHI CLASS.WHOLE SINGLE ARM BOAT DAVIT: Degutting/ Regutting of entire davit from/ to foundation, Separation/ detachment arm and vertical column, de-coupling of motors and gear boxes and dismantling of its sub-assemblies: While re-gutting the davit suitable HT bolts may be used and proper care to be taken whilst tightening the davit to the foundation:
23DELHI CLASS.WHOLE SINGLE ARM BOAT DAVIT: Hydro Blasting of entire davit structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:DELHI CLASS.WHOLE SINGLE ARM BOAT DAVIT: Hydro Blasting of entire davit structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:
24DELHI CLASS.WHOLE SINGLE ARM BOAT DAVIT:Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken:DELHI CLASS.WHOLE SINGLE ARM BOAT DAVIT:Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken:
25DELHI CLASS.HOISTING/LOWERING GEAR BOX AND ITS WINCH: Dismantling, defect identification and overhauling of Hoisting/Lowering Gear box and its winch: Which includes replacement of worn out/ damaged bearings, gears, pinions, shafts, bearing end covers, inspection covers,bushes, circlips, oil seals, washers/ spring washers/ thrust washers, deadman weight/counter weight, oil level indicators, oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage ,repair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)DELHI CLASS.HOISTING/LOWERING GEAR BOX AND ITS WINCH: Dismantling, defect identification and overhauling of Hoisting/Lowering Gear box and its winch: Which includes replacement of worn out/ damaged bearings, gears, pinions, shafts, bearing end covers, inspection covers,bushes, circlips, oil seals, washers/ spring washers/ thrust washers, deadman weight/counter weight, oil level indicators, oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage ,repair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
26DELHI CLASS.SLEWING GEAR BOX: Dismantling, defect identifiaction and overhauling of slewing gear box: Which includes replacement of worn out / damages bearings, gears, slewing ring gear (if installed), pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, Cylindrical rollers, worn wheel & worm shaft, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)DELHI CLASS.SLEWING GEAR BOX: Dismantling, defect identifiaction and overhauling of slewing gear box: Which includes replacement of worn out / damages bearings, gears, slewing ring gear (if installed), pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, Cylindrical rollers, worn wheel & worm shaft, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
27DELHI CLASS.CLUTCH CUM COUPLING, CENTRIFUGAL BRAKE UNIT,ENGAGING AND DIS-ENGAGING MECHANISM : Dismantling, defect identification and overhauling of clutch cum coupling, centrifugal brake unit, engaging and dis-engaging mechanism: Which includes replacement/repair of clutch plates: QC to be offered before and after assembly:DELHI CLASS.CLUTCH CUM COUPLING, CENTRIFUGAL BRAKE UNIT,ENGAGING AND DIS-ENGAGING MECHANISM : Dismantling, defect identification and overhauling of clutch cum coupling, centrifugal brake unit, engaging and dis-engaging mechanism: Which includes replacement/repair of clutch plates: QC to be offered before and after assembly:
28DELHI CLASS.Charge oil in gear boxes with Servo Gear oil 140 or as specified in the OEM Manual:Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:DELHI CLASS.Charge oil in gear boxes with Servo Gear oil 140 or as specified in the OEM Manual:Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:
29DELHI CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:DELHI CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:
30DELHI CLASS.Document all activities undertaken with time and spares consumed and submit the same:DELHI CLASS.Document all activities undertaken with time and spares consumed and submit the same:
31DELHI CLASS.After completion of load test, examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: Suspectd flaws must be examined by NDT techniques: Carry out repairs as necessary and reoffer to load testing like wise:DELHI CLASS.After completion of load test, examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: Suspectd flaws must be examined by NDT techniques: Carry out repairs as necessary and reoffer to load testing like wise:
32OPV CLASS.Degutting/ Regutting of the davit gear box from/ to foudation and dismantling of davit gear box for survey or inspection and gauging of its parts:While regutting the Davit suitable HT Bolts be used and proper care to be taken whilst tightening the davit to the foundationOPV CLASS.Degutting/ Regutting of the davit gear box from/ to foudation and dismantling of davit gear box for survey or inspection and gauging of its parts:While regutting the Davit suitable HT Bolts be used and proper care to be taken whilst tightening the davit to the foundation
33OPV CLASS.Hydro Blasting of entire Gear box structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:OPV CLASS.Hydro Blasting of entire Gear box structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:
34OPV CLASS.Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken:OPV CLASS.Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken:
35OPV CLASS.REDUCTION GEAR BOX: Dismantling, defect identifiaction and overhauling of luffing gear box: Which includes replacement of worn out / damages bearings, screws shaft, gears, pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)OPV CLASS.REDUCTION GEAR BOX: Dismantling, defect identifiaction and overhauling of luffing gear box: Which includes replacement of worn out / damages bearings, screws shaft, gears, pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
36OPV CLASS.Charge oil in gear boxes with Servo Gear oil 140: Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:OPV CLASS.Charge oil in gear boxes with Servo Gear oil 140: Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:
37OPV CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:OPV CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:
38OPV CLASS.Document all activities undertaken with time and spares consumed and submit the same:OPV CLASS.Document all activities undertaken with time and spares consumed and submit the same:
39OPV CLASS.After completion of load test, examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: Suspectd flaws must be examined by NDT techniques: Carry out repairs as necessary and retestOPV CLASS.After completion of load test, examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: Suspectd flaws must be examined by NDT techniques: Carry out repairs as necessary and retest
40BANGARAM CLASS.WHOLE SINGLE ARM BOAT DAVIT: Degutting/ Regutting of entire davit from/ to foundation, Separation/ detachment arm and vertical column, de-coupling of motors and gear boxes and dismantling of its sub-assemblies: While re-gutting the davit suitable HT bolts may be used and proper care to be taken whilst tightening the davit to the foundation:BANGARAM CLASS.WHOLE SINGLE ARM BOAT DAVIT: Degutting/ Regutting of entire davit from/ to foundation, Separation/ detachment arm and vertical column, de-coupling of motors and gear boxes and dismantling of its sub-assemblies: While re-gutting the davit suitable HT bolts may be used and proper care to be taken whilst tightening the davit to the foundation:
41BANGARAM CLASS.WHOLE SINGLE ARM BOAT DAVIT: Hydro Blasting of entire davit structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:BANGARAM CLASS.WHOLE SINGLE ARM BOAT DAVIT: Hydro Blasting of entire davit structure and sub-assemblies (to HPPS) to remove paint and arrive at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes and repair as per survey reports:
42BANGARAM CLASS.WHOLE SINGLE ARM BOAT DAVIT:Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken:BANGARAM CLASS.WHOLE SINGLE ARM BOAT DAVIT:Carry out repair/renewal of structure/ gear box housings as required:In case of repair of gearbox housing, trueness and alignment of drive and driven shaft also be undertaken:
43BANGARAM CLASS.HOISTING/LOWERING GEAR BOX AND ITS WINCH: Dismantling, defect identification and overhauling of Hoisting/Lowering Gear box and its winch: Which includes replacement of worn out/ damaged bearings, gears, pinions, shafts, bearing end covers, inspection covers,bushes, circlips, oil seals, washers/ spring washers/ thrust washers, deadman weight/counter weight, oil level indicators, oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage ,repair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)BANGARAM CLASS.HOISTING/LOWERING GEAR BOX AND ITS WINCH: Dismantling, defect identification and overhauling of Hoisting/Lowering Gear box and its winch: Which includes replacement of worn out/ damaged bearings, gears, pinions, shafts, bearing end covers, inspection covers,bushes, circlips, oil seals, washers/ spring washers/ thrust washers, deadman weight/counter weight, oil level indicators, oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage ,repair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
44BANGARAM CLASS.SLEWING ARRANGEMENT & SLEWING GEAR BOX: Dismantling, defect identifiaction and overhauling of slewing gear box: Which includes replacement of worn out / damages bearings, gears, slewing ring gear (if installed), pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, Cylindrical rollers, worn wheel & worm shaft, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)BANGARAM CLASS.SLEWING ARRANGEMENT & SLEWING GEAR BOX: Dismantling, defect identifiaction and overhauling of slewing gear box: Which includes replacement of worn out / damages bearings, gears, slewing ring gear (if installed), pinions, shafts, bearing end covers, inspection covers, bushes, circlips, oil seals, Cylindrical rollers, worn wheel & worm shaft, washers/ spring washers/ Thrust washers, oil level indicators , oil drain plug and fastners:Ensure for no oil leakage from gear box and its seals, any evidence of oil leakage, reapair accordingly: QC to be offered each and every stage such as dismantling, defect identification, new spares inspection, overhauling and trails ( which includes load trails)
45BANGARAM CLASS.CLUTCH CUM COUPLING, CENTRIFUGAL BRAKE UNIT,ENGAGING AND DIS-ENGAGING MECHANISM & MANUAL HAND OPERATION: Dismantling, defect identification and overhauling of clutch cum coupling, centrifugal brake unit, engaging and dis-engaging mechanism: Which includes replacement/repair of clutch plates: QC to be offered before and after assembly:BANGARAM CLASS.CLUTCH CUM COUPLING, CENTRIFUGAL BRAKE UNIT,ENGAGING AND DIS-ENGAGING MECHANISM & MANUAL HAND OPERATION: Dismantling, defect identification and overhauling of clutch cum coupling, centrifugal brake unit, engaging and dis-engaging mechanism: Which includes replacement/repair of clutch plates: QC to be offered before and after assembly:
46BANGARAM CLASS.Charge oil in gear boxes with Servo Gear oil 140 or as specified in the OEM Manual:Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:BANGARAM CLASS.Charge oil in gear boxes with Servo Gear oil 140 or as specified in the OEM Manual:Charge grease into grease nipples:Grease all sheaves, pivots and other moving parts of the davit:
47BANGARAM CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:BANGARAM CLASS.Prove davit for load test as per OEM specified standards for safe and running loads:
48BANGARAM CLASS.Document all activities undertaken with time and spares consumed and submit the same:BANGARAM CLASS.Document all activities undertaken with time and spares consumed and submit the same:
49BANGARAM CLASS.After completion of load test, examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: Suspectd flaws must be examined by NDT techniques: Carry out repairs as necessary and retesting like wise:BANGARAM CLASS.After completion of load test, examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: Suspectd flaws must be examined by NDT techniques: Carry out repairs as necessary and retesting like wise:
50AMMUNITION/GEMINI DAVIT.Degutting/ Regutting of theAmmunition/Gemini davit from/ to foudation and dismantling of davit for survey or inspection and gauging of its parts: While re gutting the davit suitable HT Bolts be used and proper care to be taken whilst tightening the davit to the foundation:AMMUNITION/GEMINI DAVIT.Degutting/ Regutting of theAmmunition/Gemini davit from/ to foudation and dismantling of davit for survey or inspection and gauging of its parts: While re gutting the davit suitable HT Bolts be used and proper care to be taken whilst tightening the davit to the foundation:
51AMMUNITION/GEMINI DAVIT.Hydro Blasting / Sand Blasting of entire davit structure and sub-assemblies to remove paint and attain at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes etcAMMUNITION/GEMINI DAVIT.Hydro Blasting / Sand Blasting of entire davit structure and sub-assemblies to remove paint and attain at bare metal followed by application of primer for preservation: Survey davit structure and gearboxes for corrosion, distortion, pitting, holes etc
52AMMUNITION/GEMINI DAVIT.Carry out repair/renewal of structure/ gear box housings as required:AMMUNITION/GEMINI DAVIT.Carry out repair/renewal of structure/ gear box housings as required:
53AMMUNITION/GEMINI DAVIT.Gear Box : Dismantling, defect identification, and overhauling of gear box and ratchet mechanism, operating handle end pulleys/guiding pulleys, springs and its bush bearings all gears / sector gears, springs operating handle, pulleys to be cleaned from rust and inspected same to be replaced/ renewed if necessary: QC to be offerd before and after assembly:AMMUNITION/GEMINI DAVIT.Gear Box : Dismantling, defect identification, and overhauling of gear box and ratchet mechanism, operating handle end pulleys/guiding pulleys, springs and its bush bearings all gears / sector gears, springs operating handle, pulleys to be cleaned from rust and inspected same to be replaced/ renewed if necessary: QC to be offerd before and after assembly:
54AMMUNITION/GEMINI DAVIT.Grease all sheaves, pivots and other moving parts of the davit:AMMUNITION/GEMINI DAVIT.Grease all sheaves, pivots and other moving parts of the davit:
55AMMUNITION/GEMINI DAVIT.Prove davit for load test as per OEM specified standards for safe and running loads:AMMUNITION/GEMINI DAVIT.Prove davit for load test as per OEM specified standards for safe and running loads:
56AMMUNITION/GEMINI DAVIT.Document all activities undertaken with time and spares consumed and submit the same:AMMUNITION/GEMINI DAVIT.Document all activities undertaken with time and spares consumed and submit the same:
57AMMUNITION/GEMINI DAVIT.After completion of load test, re- examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: If any flaws observed those flaws must be examined by NDT techniques and accordingly Carry out repairs as necessary and reoffer tp load testing like wise:AMMUNITION/GEMINI DAVIT.After completion of load test, re- examine the complete davit structure and associated lifting gears for flaws, distortion, deflection etc: If any flaws observed those flaws must be examined by NDT techniques and accordingly Carry out repairs as necessary and reoffer tp load testing like wise:
58Mandatory Spares.CORVET CLASS.7481240.Oil Level IndicatorMandatory Spares.CORVET CLASS.7481240.Oil Level Indicator
59Mandatory Spares.CORVET CLASS.7481250.Drain PlugMandatory Spares.CORVET CLASS.7481250.Drain Plug
60Mandatory Spares.CORVET CLASS.7481270.Worm ShaftMandatory Spares.CORVET CLASS.7481270.Worm Shaft
61Mandatory Spares.CORVET CLASS.7481271.KeyMandatory Spares.CORVET CLASS.7481271.Key
62Mandatory Spares.CORVET CLASS.7481280.Taper Roller BearingMandatory Spares.CORVET CLASS.7481280.Taper Roller Bearing
63Mandatory Spares.CORVET CLASS.7481315.Oil SealMandatory Spares.CORVET CLASS.7481315.Oil Seal
64Mandatory Spares.CORVET CLASS.7481340.Worm WheelMandatory Spares.CORVET CLASS.7481340.Worm Wheel
65Mandatory Spares.CORVET CLASS.7481370.Worm ShaftMandatory Spares.CORVET CLASS.7481370.Worm Shaft
66Mandatory Spares.CORVET CLASS.7481380.Taper Roller BearingMandatory Spares.CORVET CLASS.7481380.Taper Roller Bearing
67Mandatory Spares.CORVET CLASS.7481430.Worm wheelMandatory Spares.CORVET CLASS.7481430.Worm wheel
68Mandatory Spares.CORVET CLASS.7481450.Main ShaftMandatory Spares.CORVET CLASS.7481450.Main Shaft
69Mandatory Spares.CORVET CLASS.7481460.Ball BearingMandatory Spares.CORVET CLASS.7481460.Ball Bearing
70Mandatory Spares.CORVET CLASS.7481485.Oil SealMandatory Spares.CORVET CLASS.7481485.Oil Seal
71Mandatory Spares.CORVET CLASS.7481511.Allen BoltMandatory Spares.CORVET CLASS.7481511.Allen Bolt
72Mandatory Spares.CORVET CLASS.7482220.CouplingMandatory Spares.CORVET CLASS.7482220.Coupling
73Mandatory Spares.CORVET CLASS.748235.Oil SealMandatory Spares.CORVET CLASS.748235.Oil Seal
74Mandatory Spares.CORVET CLASS.7482350.Oil Level IndicatorMandatory Spares.CORVET CLASS.7482350.Oil Level Indicator
75Mandatory Spares.CORVET CLASS.7482370.Worm ShaftMandatory Spares.CORVET CLASS.7482370.Worm Shaft
76Mandatory Spares.CORVET CLASS.7482380.Taper Roller BearingMandatory Spares.CORVET CLASS.7482380.Taper Roller Bearing
77Mandatory Spares.CORVET CLASS.7482435.Oil SealMandatory Spares.CORVET CLASS.7482435.Oil Seal
78Mandatory Spares.CORVET CLASS.7482460.Worm WheelMandatory Spares.CORVET CLASS.7482460.Worm Wheel
79Mandatory Spares.CORVET CLASS.7482470.Worm ShaftMandatory Spares.CORVET CLASS.7482470.Worm Shaft
80Mandatory Spares.CORVET CLASS.7482480.Taper Roller BearingMandatory Spares.CORVET CLASS.7482480.Taper Roller Bearing
81Mandatory Spares.CORVET CLASS.7482540.BearingMandatory Spares.CORVET CLASS.7482540.Bearing
82Mandatory Spares.CORVET CLASS.7482560.Main ShaftMandatory Spares.CORVET CLASS.7482560.Main Shaft
83Mandatory Spares.CORVET CLASS.7482610.PinionMandatory Spares.CORVET CLASS.7482610.Pinion
84Mandatory Spares.CORVET CLASS.7482752.Hex:Bolt + Special WasherMandatory Spares.CORVET CLASS.7482752.Hex:Bolt + Special Washer
85Mandatory Spares.CORVET CLASS.7483290.Oil Level IndicatorMandatory Spares.CORVET CLASS.7483290.Oil Level Indicator
86Mandatory Spares.CORVET CLASS.7483300.Drain PlugMandatory Spares.CORVET CLASS.7483300.Drain Plug
87Mandatory Spares.CORVET CLASS.7483320.Worm ShaftMandatory Spares.CORVET CLASS.7483320.Worm Shaft
88Mandatory Spares.CORVET CLASS.7483330.Taper Roller BearingMandatory Spares.CORVET CLASS.7483330.Taper Roller Bearing
89Mandatory Spares.CORVET CLASS.7483352.Hex:Bolt + Special WasherMandatory Spares.CORVET CLASS.7483352.Hex:Bolt + Special Washer
90Mandatory Spares.CORVET CLASS.7483361.PackingMandatory Spares.CORVET CLASS.7483361.Packing
91Mandatory Spares.CORVET CLASS.7483362.Hex:Bolt + Special WasherMandatory Spares.CORVET CLASS.7483362.Hex:Bolt + Special Washer
92Mandatory Spares.CORVET CLASS.7483365.Oil Level IndicatorMandatory Spares.CORVET CLASS.7483365.Oil Level Indicator
93Mandatory Spares.CORVET CLASS.7483390.Worm WheelMandatory Spares.CORVET CLASS.7483390.Worm Wheel
94Mandatory Spares.CORVET CLASS.7483420.Worm ShaftMandatory Spares.CORVET CLASS.7483420.Worm Shaft
95Mandatory Spares.CORVET CLASS.7483430.Taper Roller BearingMandatory Spares.CORVET CLASS.7483430.Taper Roller Bearing
96Mandatory Spares.CORVET CLASS.7486480.Worm WheelMandatory Spares.CORVET CLASS.7486480.Worm Wheel
97Mandatory Spares.CORVET CLASS.7483500.Main ShaftMandatory Spares.CORVET CLASS.7483500.Main Shaft
98Mandatory Spares.CORVET CLASS.7483510.Ball BearingMandatory Spares.CORVET CLASS.7483510.Ball Bearing
99Mandatory Spares.CORVET CLASS.7483535.Oil SealMandatory Spares.CORVET CLASS.7483535.Oil Seal
100Mandatory Spares.CORVET CLASS.7483625.Hex:Bolt + Special WasherMandatory Spares.CORVET CLASS.7483625.Hex:Bolt + Special Washer
101Mandatory Spares.CORVET CLASS.7484201.Hex:Bolt + Special WasherMandatory Spares.CORVET CLASS.7484201.Hex:Bolt + Special Washer
102Mandatory Spares.CORVET CLASS.7484240.Slewing RingMandatory Spares.CORVET CLASS.7484240.Slewing Ring
103Mandatory Spares.CORVET CLASS.7485201.Hex:Bolt + Special WasherMandatory Spares.CORVET CLASS.7485201.Hex:Bolt + Special Washer
104Mandatory Spares.CORVET CLASS.7485260.Bush BearingMandatory Spares.CORVET CLASS.7485260.Bush Bearing
105Mandatory Spares.CORVET CLASS.7485305.Grease NippleMandatory Spares.CORVET CLASS.7485305.Grease Nipple
106Mandatory Spares.CORVET CLASS.7485350.Bush BearingMandatory Spares.CORVET CLASS.7485350.Bush Bearing
107Mandatory Spares.CORVET CLASS.7485360.Thrust WasherMandatory Spares.CORVET CLASS.7485360.Thrust Washer
108Mandatory Spares.CORVET CLASS.7485531.Grease NippleMandatory Spares.CORVET CLASS.7485531.Grease Nipple
109Mandatory Spares.CORVET CLASS.7485720.SheaveMandatory Spares.CORVET CLASS.7485720.Sheave
110Mandatory Spares.CORVET CLASS.7485730.Bush BearingMandatory Spares.CORVET CLASS.7485730.Bush Bearing
111Mandatory Spares.CORVET CLASS.7485751.Grease NippleMandatory Spares.CORVET CLASS.7485751.Grease Nipple
112Mandatory Spares.CORVET CLASS.HEW/P-302/EMB-Size 18/9.Spring Washer for Brake Mounting ScrewMandatory Spares.CORVET CLASS.HEW/P-302/EMB-Size 18/9.Spring Washer for Brake Mounting Screw
113Mandatory Spares.CORVET CLASS.7483500A.Screw ShaftMandatory Spares.CORVET CLASS.7483500A.Screw Shaft
114Mandatory Spares.LST CLASS.GEW040661754262280.Adapter for oil level IndicatorMandatory Spares.LST CLASS.GEW040661754262280.Adapter for oil level Indicator
115Mandatory Spares.LST CLASS.GEW040661754262284.Oil level IndicatorMandatory Spares.LST CLASS.GEW040661754262284.Oil level Indicator
116Mandatory Spares.LST CLASS.GEW040661754262290.Adaptor for Drain PlugMandatory Spares.LST CLASS.GEW040661754262290.Adaptor for Drain Plug
117Mandatory Spares.LST CLASS.GEW040661754262295.Drain PlugMandatory Spares.LST CLASS.GEW040661754262295.Drain Plug
118Mandatory Spares.LST CLASS.GEW040661754262340.Reduction gear wheelMandatory Spares.LST CLASS.GEW040661754262340.Reduction gear wheel
119Mandatory Spares.LST CLASS.GEW040661754262350.Taper Roller BearingMandatory Spares.LST CLASS.GEW040661754262350.Taper Roller Bearing
120Mandatory Spares.LST CLASS.GEW040661754262360.Bearing Housing CoverMandatory Spares.LST CLASS.GEW040661754262360.Bearing Housing Cover
121Mandatory Spares.LST CLASS.GEW040661754262365.Oil sealMandatory Spares.LST CLASS.GEW040661754262365.Oil seal
122Mandatory Spares.LST CLASS.GEW040661754262410.1st Reduction gear wheelMandatory Spares.LST CLASS.GEW040661754262410.1st Reduction gear wheel
123Mandatory Spares.LST CLASS.GEW040661754262420.Pimion ShaftMandatory Spares.LST CLASS.GEW040661754262420.Pimion Shaft
124Mandatory Spares.LST CLASS.GEW040661754262440.Ball Bearing - 6214Mandatory Spares.LST CLASS.GEW040661754262440.Ball Bearing - 6214
125Mandatory Spares.LST CLASS.GEW040661754262452.Hex:Bolt & Sp:WasherMandatory Spares.LST CLASS.GEW040661754262452.Hex:Bolt & Sp:Washer
126Mandatory Spares.LST CLASS.GEW040661754262462.Hex:Bolt & Sp:WasherMandatory Spares.LST CLASS.GEW040661754262462.Hex:Bolt & Sp:Washer
127Mandatory Spares.LST CLASS.GEW040661754262480.Main ShaftMandatory Spares.LST CLASS.GEW040661754262480.Main Shaft
128Mandatory Spares.LST CLASS.GEW040661754262510.Ball Bearing - 6217Mandatory Spares.LST CLASS.GEW040661754262510.Ball Bearing - 6217
129Mandatory Spares.LST CLASS.GEW040661754262522.Hex:Bolt & Sp:WasherMandatory Spares.LST CLASS.GEW040661754262522.Hex:Bolt & Sp:Washer
130Mandatory Spares.LST CLASS.GEW040661754262540.PinionMandatory Spares.LST CLASS.GEW040661754262540.Pinion
131Mandatory Spares.LST CLASS.GEW040661754262550.2nd Reduction gear wheelMandatory Spares.LST CLASS.GEW040661754262550.2nd Reduction gear wheel
132Mandatory Spares.LST CLASS.GEW040661754262551.Hex:Bolt & Sp:WasherMandatory Spares.LST CLASS.GEW040661754262551.Hex:Bolt & Sp:Washer
133Mandatory Spares.LST CLASS.GEW040661754262581.Allen Bolt & Sp WasherMandatory Spares.LST CLASS.GEW040661754262581.Allen Bolt & Sp Washer
134Mandatory Spares.LST CLASS.GEW040661754262600.Idler GearMandatory Spares.LST CLASS.GEW040661754262600.Idler Gear
135Mandatory Spares.LST CLASS.GEW040661754262610.Ball Bearing 6212 - 2RS1Mandatory Spares.LST CLASS.GEW040661754262610.Ball Bearing 6212 - 2RS1
136Mandatory Spares.LST CLASS.GEW040661754262630.Shaft for Idle GearMandatory Spares.LST CLASS.GEW040661754262630.Shaft for Idle Gear
137Mandatory Spares.LST CLASS.GEW040661754262681.Allen Bolt & Sp WasherMandatory Spares.LST CLASS.GEW040661754262681.Allen Bolt & Sp Washer
138Mandatory Spares.LST CLASS.GEW040661754262682.Allen Bolt & Sp WasherMandatory Spares.LST CLASS.GEW040661754262682.Allen Bolt & Sp Washer
139Mandatory Spares.LST CLASS.GEW040661754261330.Ball BearingMandatory Spares.LST CLASS.GEW040661754261330.Ball Bearing
140Mandatory Spares.LST CLASS.GEW040661754261360.Dog ClutchMandatory Spares.LST CLASS.GEW040661754261360.Dog Clutch
141Mandatory Spares.LST CLASS.GEW040661754261370.Shifter Ring in HlavesMandatory Spares.LST CLASS.GEW040661754261370.Shifter Ring in Hlaves
142Mandatory Spares.LST CLASS.GEW040661754261385.Hex:Bolt Nut & Sp:WasherMandatory Spares.LST CLASS.GEW040661754261385.Hex:Bolt Nut & Sp:Washer
143Mandatory Spares.LST CLASS.GEW040661754261390.Clutch Engaging Dis engaging LeverMandatory Spares.LST CLASS.GEW040661754261390.Clutch Engaging Dis engaging Lever
144Mandatory Spares.LST CLASS.GEW040661754261400.Bush BearingMandatory Spares.LST CLASS.GEW040661754261400.Bush Bearing
145Mandatory Spares.LST CLASS.GEW040661754261412.Hex: Bolt & Sp: WasherMandatory Spares.LST CLASS.GEW040661754261412.Hex: Bolt & Sp: Washer
146Mandatory Spares.LST CLASS.GEW040661754261421.Hex: Bolt & Sp: WasherMandatory Spares.LST CLASS.GEW040661754261421.Hex: Bolt & Sp: Washer
147Mandatory Spares.LST CLASS.GEW040661754261460.Pinion ShaftMandatory Spares.LST CLASS.GEW040661754261460.Pinion Shaft
148Mandatory Spares.LST CLASS.GEW040661754261461.Grease NippleMandatory Spares.LST CLASS.GEW040661754261461.Grease Nipple
149Mandatory Spares.LST CLASS.GEW040661754261483.Oil Seal 80 x 100 x 10Mandatory Spares.LST CLASS.GEW040661754261483.Oil Seal 80 x 100 x 10
150Mandatory Spares.LST CLASS.GEW040661754261490.Ball Bearing Sealed 6212-2RS1Mandatory Spares.LST CLASS.GEW040661754261490.Ball Bearing Sealed 6212-2RS1
151Mandatory Spares.LST CLASS.GEW040661754261500.Brake DiscMandatory Spares.LST CLASS.GEW040661754261500.Brake Disc
152Mandatory Spares.LST CLASS.GEW040661754261501.KeyMandatory Spares.LST CLASS.GEW040661754261501.Key
153Mandatory Spares.LST CLASS.GEW040661754261502.Circlip ExternalMandatory Spares.LST CLASS.GEW040661754261502.Circlip External
154Mandatory Spares.LST CLASS.GEW040661754261526.RivetMandatory Spares.LST CLASS.GEW040661754261526.Rivet
155Mandatory Spares.LST CLASS.GEW040661754261530.SpringMandatory Spares.LST CLASS.GEW040661754261530.Spring
156Mandatory Spares.LST CLASS.GEW040661754261540.EccentricMandatory Spares.LST CLASS.GEW040661754261540.Eccentric
157Mandatory Spares.LST CLASS.GEW040661754261541.Oil Seal 50 x 65 x 7Mandatory Spares.LST CLASS.GEW040661754261541.Oil Seal 50 x 65 x 7
158Mandatory Spares.LST CLASS.GEW040661754261562.Hex: Bolt & Sp: WasherMandatory Spares.LST CLASS.GEW040661754261562.Hex: Bolt & Sp: Washer
159Mandatory Spares.LST CLASS.GEW040661754261595.LiningMandatory Spares.LST CLASS.GEW040661754261595.Lining
160Mandatory Spares.LST CLASS.GEW040661754261596.RivetMandatory Spares.LST CLASS.GEW040661754261596.Rivet
161Mandatory Spares.LST CLASS.GEW040661754261630.Dead Man BrakeMandatory Spares.LST CLASS.GEW040661754261630.Dead Man Brake
162Mandatory Spares.LST CLASS.GEW040661754261660.Pinion ShaftMandatory Spares.LST CLASS.GEW040661754261660.Pinion Shaft
163Mandatory Spares.LST CLASS.GEW040661754261671.KeyMandatory Spares.LST CLASS.GEW040661754261671.Key
164Mandatory Spares.LST CLASS.GEW040661754261680.Ball Bearing 6212Mandatory Spares.LST CLASS.GEW040661754261680.Ball Bearing 6212
165Mandatory Spares.LST CLASS.GEW040661754261685.Ball Bearing 6213Mandatory Spares.LST CLASS.GEW040661754261685.Ball Bearing 6213
166Mandatory Spares.LST CLASS.GEW040661754261692.CSK ScrewMandatory Spares.LST CLASS.GEW040661754261692.CSK Screw
167Mandatory Spares.LST CLASS.GEW040661754261740.Ball Bearing 6224Mandatory Spares.LST CLASS.GEW040661754261740.Ball Bearing 6224
168Mandatory Spares.LST CLASS.GEW040661754261765.Oil Seal 120 x 150 x 12Mandatory Spares.LST CLASS.GEW040661754261765.Oil Seal 120 x 150 x 12
169Mandatory Spares.LST CLASS.GEW040661754261772.Hex: Bolt & Sp: WasherMandatory Spares.LST CLASS.GEW040661754261772.Hex: Bolt & Sp: Washer
170Mandatory Spares.LST CLASS.GEW040661754261795.Rope clampMandatory Spares.LST CLASS.GEW040661754261795.Rope clamp
171Mandatory Spares.LST CLASS.GEW040661754261796.Allen Bolt & Sp WasherMandatory Spares.LST CLASS.GEW040661754261796.Allen Bolt & Sp Washer
172Mandatory Spares.LST CLASS.GEW040661754261801.Hex Bolt & Sp: WasherMandatory Spares.LST CLASS.GEW040661754261801.Hex Bolt & Sp: Washer
173Mandatory Spares.LST CLASS.GEW040661754261495.O RingMandatory Spares.LST CLASS.GEW040661754261495.O Ring
174Mandatory Spares.LST CLASS.GEW040661754261506.CSK ScrewMandatory Spares.LST CLASS.GEW040661754261506.CSK Screw
175Mandatory Spares.DELHI CLASS.7351510.EccentricMandatory Spares.DELHI CLASS.7351510.Eccentric
176Mandatory Spares.DELHI CLASS.7353340.Bush BearingMandatory Spares.DELHI CLASS.7353340.Bush Bearing
177Mandatory Spares.DELHI CLASS.7352320.Taper Roller bearingMandatory Spares.DELHI CLASS.7352320.Taper Roller bearing
178Mandatory Spares.DELHI CLASS.7351255.Ball BearingMandatory Spares.DELHI CLASS.7351255.Ball Bearing
179Mandatory Spares.DELHI CLASS.7351290.Ball BearingMandatory Spares.DELHI CLASS.7351290.Ball Bearing
180Mandatory Spares.DELHI CLASS.7351300.Ball BearingMandatory Spares.DELHI CLASS.7351300.Ball Bearing
181Mandatory Spares.DELHI CLASS.7352620.Ball BearingMandatory Spares.DELHI CLASS.7352620.Ball Bearing
182Mandatory Spares.DELHI CLASS.7352630.Ball BearingMandatory Spares.DELHI CLASS.7352630.Ball Bearing
183Mandatory Spares.DELHI CLASS.7352420.Ball BearingMandatory Spares.DELHI CLASS.7352420.Ball Bearing
184Mandatory Spares.DELHI CLASS.7351650.Ball BearingMandatory Spares.DELHI CLASS.7351650.Ball Bearing
185Mandatory Spares.DELHI CLASS.7351655.Ball BearingMandatory Spares.DELHI CLASS.7351655.Ball Bearing
186Mandatory Spares.DELHI CLASS.7351710.Ball BearingMandatory Spares.DELHI CLASS.7351710.Ball Bearing
187Mandatory Spares.DELHI CLASS.7351496.RivetMandatory Spares.DELHI CLASS.7351496.Rivet
188Mandatory Spares.DELHI CLASS.7351566.RivetMandatory Spares.DELHI CLASS.7351566.Rivet
189Mandatory Spares.DELHI CLASS.7351495.Brake liningMandatory Spares.DELHI CLASS.7351495.Brake lining
190Mandatory Spares.DELHI CLASS.7351565.Brake liningMandatory Spares.DELHI CLASS.7351565.Brake lining
191Mandatory Spares.DELHI CLASS.7351490.Brake ShoeMandatory Spares.DELHI CLASS.7351490.Brake Shoe
192Mandatory Spares.DELHI CLASS.7351385.Oil SealMandatory Spares.DELHI CLASS.7351385.Oil Seal
193Mandatory Spares.DELHI CLASS.7351452.Oil SealMandatory Spares.DELHI CLASS.7351452.Oil Seal
194Mandatory Spares.DELHI CLASS.7351511.Oil SealMandatory Spares.DELHI CLASS.7351511.Oil Seal
195Mandatory Spares.DELHI CLASS.7351735.Oil SealMandatory Spares.DELHI CLASS.7351735.Oil Seal
196Mandatory Spares.DELHI CLASS.7352475.Oil SealMandatory Spares.DELHI CLASS.7352475.Oil Seal
197Mandatory Spares.DELHI CLASS.7351330.ClutchMandatory Spares.DELHI CLASS.7351330.Clutch
198Mandatory Spares.DELHI CLASS.7351766.Allen bolts + WashersMandatory Spares.DELHI CLASS.7351766.Allen bolts + Washers
199Mandatory Spares.DELHI CLASS.7352711.Allen bolts + WashersMandatory Spares.DELHI CLASS.7352711.Allen bolts + Washers
200Mandatory Spares.DELHI CLASS.7351742.Hex bolt + sp: WasherMandatory Spares.DELHI CLASS.7351742.Hex bolt + sp: Washer
201Mandatory Spares.DELHI CLASS.7351212.Hex bolt + sp: WasherMandatory Spares.DELHI CLASS.7351212.Hex bolt + sp: Washer
202Mandatory Spares.DELHI CLASS.7351732.Hex bolt + sp: WasherMandatory Spares.DELHI CLASS.7351732.Hex bolt + sp: Washer
203Mandatory Spares.DELHI CLASS.7351331.Hex bolt + sp: WasherMandatory Spares.DELHI CLASS.7351331.Hex bolt + sp: Washer
204Mandatory Spares.DELHI CLASS.7351382.Hex bolt + sp: WasherMandatory Spares.DELHI CLASS.7351382.Hex bolt + sp: Washer
205Mandatory Spares.DELHI CLASS.7352713.Hex bolt + sp: WasherMandatory Spares.DELHI CLASS.7352713.Hex bolt + sp: Washer
206Mandatory Spares.DELHI CLASS.7352752.Hex bolt + sp: WasherMandatory Spares.DELHI CLASS.7352752.Hex bolt + sp: Washer
207Mandatory Spares.DELHI CLASS.7351201.Hex bolt + Nut + sp: WasherMandatory Spares.DELHI CLASS.7351201.Hex bolt + Nut + sp: Washer
208Mandatory Spares.DELHI CLASS.7351102.Hex bolt + sp: WasherMandatory Spares.DELHI CLASS.7351102.Hex bolt + sp: Washer
209Mandatory Spares.DELHI CLASS.7351431.Graese NipplesMandatory Spares.DELHI CLASS.7351431.Graese Nipples
210Mandatory Spares.DELHI CLASS.7352710.Slewing BearingMandatory Spares.DELHI CLASS.7352710.Slewing Bearing
211Mandatory Spares.DELHI CLASS.7352670.PinionMandatory Spares.DELHI CLASS.7352670.Pinion
212Mandatory Spares.DELHI CLASS.7351225.Oil level IndicatorMandatory Spares.DELHI CLASS.7351225.Oil level Indicator
213Mandatory Spares.DELHI CLASS.7351230.Drain PlugMandatory Spares.DELHI CLASS.7351230.Drain Plug
214Mandatory Spares.OPV CLASS.1754262280-1.Adaptor for oil level indicatorMandatory Spares.OPV CLASS.1754262280-1.Adaptor for oil level indicator
215Mandatory Spares.OPV CLASS.1754262280-2.oil level indicatorMandatory Spares.OPV CLASS.1754262280-2.oil level indicator
216Mandatory Spares.OPV CLASS.1754262280-3.Adaptor for Drain PlugMandatory Spares.OPV CLASS.1754262280-3.Adaptor for Drain Plug
217Mandatory Spares.OPV CLASS.1754262280-4.Drain PlugMandatory Spares.OPV CLASS.1754262280-4.Drain Plug
218Mandatory Spares.OPV CLASS.1754262280-5.Pinoin ShaftMandatory Spares.OPV CLASS.1754262280-5.Pinoin Shaft
219Mandatory Spares.OPV CLASS.1754262280-6.Tapper Roller BearingMandatory Spares.OPV CLASS.1754262280-6.Tapper Roller Bearing
220Mandatory Spares.OPV CLASS.1754262280-7.Bearing Housing CoverMandatory Spares.OPV CLASS.1754262280-7.Bearing Housing Cover
221Mandatory Spares.OPV CLASS.1754262280-8.Oil SealMandatory Spares.OPV CLASS.1754262280-8.Oil Seal
222Mandatory Spares.OPV CLASS.1754262280-9.Pinoin ShaftMandatory Spares.OPV CLASS.1754262280-9.Pinoin Shaft
223Mandatory Spares.OPV CLASS.1754262280-10.Gear wheelMandatory Spares.OPV CLASS.1754262280-10.Gear wheel
224Mandatory Spares.OPV CLASS.1754262280-11.Ball BearingMandatory Spares.OPV CLASS.1754262280-11.Ball Bearing
225Mandatory Spares.OPV CLASS.1754262280-12.Hex:Bolt & Sp:WasherMandatory Spares.OPV CLASS.1754262280-12.Hex:Bolt & Sp:Washer
226Mandatory Spares.OPV CLASS.1754262280-13.Hex:Bolt & Sp:WasherMandatory Spares.OPV CLASS.1754262280-13.Hex:Bolt & Sp:Washer
227Mandatory Spares.OPV CLASS.1754262280-14.Main ShaftMandatory Spares.OPV CLASS.1754262280-14.Main Shaft
228Mandatory Spares.OPV CLASS.1754262280-15.Ball BearingMandatory Spares.OPV CLASS.1754262280-15.Ball Bearing
229Mandatory Spares.OPV CLASS.1754262280-16.Hex:Bolt & Sp:WasherMandatory Spares.OPV CLASS.1754262280-16.Hex:Bolt & Sp:Washer
230Mandatory Spares.OPV CLASS.1754262280-17.Pinion & shaftMandatory Spares.OPV CLASS.1754262280-17.Pinion & shaft
231Mandatory Spares.OPV CLASS.1754262280-18.Gear Wheel & shaftMandatory Spares.OPV CLASS.1754262280-18.Gear Wheel & shaft
232Mandatory Spares.OPV CLASS.1754262280-19.Hex:Bolt & Sp:WasherMandatory Spares.OPV CLASS.1754262280-19.Hex:Bolt & Sp:Washer
233Mandatory Spares.OPV CLASS.1754262280-20.Tapper Roller BearingMandatory Spares.OPV CLASS.1754262280-20.Tapper Roller Bearing
234Mandatory Spares.OPV CLASS.1754262280-21.Shaft for Idle GearMandatory Spares.OPV CLASS.1754262280-21.Shaft for Idle Gear
235Mandatory Spares.OPV CLASS.1754262280-22.Ball BearingMandatory Spares.OPV CLASS.1754262280-22.Ball Bearing
236Mandatory Spares.OPV CLASS.1754262280-23.Dog ClutchMandatory Spares.OPV CLASS.1754262280-23.Dog Clutch
237Mandatory Spares.OPV CLASS.1754262280-24.Hex:Bolt Nut & Sp:WasherMandatory Spares.OPV CLASS.1754262280-24.Hex:Bolt Nut & Sp:Washer
238Mandatory Spares.OPV CLASS.1754262280-25.Clutch Engaging LeverMandatory Spares.OPV CLASS.1754262280-25.Clutch Engaging Lever
239Mandatory Spares.OPV CLASS.1754262280-11.Bush BearingMandatory Spares.OPV CLASS.1754262280-11.Bush Bearing
240Mandatory Spares.OPV CLASS.1754262280-121.Oil Seal 50 x 65 x 7Mandatory Spares.OPV CLASS.1754262280-121.Oil Seal 50 x 65 x 7
241Mandatory Spares.OPV CLASS.1754262280-13.Hex:Bolt & Sp:WasherMandatory Spares.OPV CLASS.1754262280-13.Hex:Bolt & Sp:Washer
242Mandatory Spares.OPV CLASS.1754262280-15.LiningMandatory Spares.OPV CLASS.1754262280-15.Lining
243Mandatory Spares.OPV CLASS.1754262280-12.RivetMandatory Spares.OPV CLASS.1754262280-12.Rivet
244Mandatory Spares.OPV CLASS.1754262280-14.Dead Man BrakeMandatory Spares.OPV CLASS.1754262280-14.Dead Man Brake
245Mandatory Spares.OPV CLASS.1754262280-16.Pinion ShaftMandatory Spares.OPV CLASS.1754262280-16.Pinion Shaft
246Mandatory Spares.OPV CLASS.1754262280-111.KeyMandatory Spares.OPV CLASS.1754262280-111.Key
247Mandatory Spares.OPV CLASS.1754262280-112.Ball BearingMandatory Spares.OPV CLASS.1754262280-112.Ball Bearing
248Mandatory Spares.OPV CLASS.1754262280-135.Ball BearingMandatory Spares.OPV CLASS.1754262280-135.Ball Bearing
249Mandatory Spares.OPV CLASS.1754262280-125.CSK ScrewMandatory Spares.OPV CLASS.1754262280-125.CSK Screw
250Mandatory Spares.OPV CLASS.1754262280-122.Ball BearingMandatory Spares.OPV CLASS.1754262280-122.Ball Bearing
251Mandatory Spares.OPV CLASS.1754262280-120.Oil Seal 120 x 150 x 12Mandatory Spares.OPV CLASS.1754262280-120.Oil Seal 120 x 150 x 12
252Mandatory Spares.OPV CLASS.1754262280-132.Hex:Bolt & Sp:WasherMandatory Spares.OPV CLASS.1754262280-132.Hex:Bolt & Sp:Washer
253Mandatory Spares.OPV CLASS.1754262280-114.Rope ClampMandatory Spares.OPV CLASS.1754262280-114.Rope Clamp
254Mandatory Spares.BANGARAM CLASS.1:02048:025.BearingMandatory Spares.BANGARAM CLASS.1:02048:025.Bearing
255Mandatory Spares.BANGARAM CLASS.1:02048:026.BearingMandatory Spares.BANGARAM CLASS.1:02048:026.Bearing
256Mandatory Spares.BANGARAM CLASS.1:02048:027.BearingMandatory Spares.BANGARAM CLASS.1:02048:027.Bearing
257Mandatory Spares.BANGARAM CLASS.1:02048:028.BearingMandatory Spares.BANGARAM CLASS.1:02048:028.Bearing
258Mandatory Spares.BANGARAM CLASS.1:02048:029.BearingMandatory Spares.BANGARAM CLASS.1:02048:029.Bearing
259Mandatory Spares.BANGARAM CLASS.1:02046:012.BearingMandatory Spares.BANGARAM CLASS.1:02046:012.Bearing
260Mandatory Spares.BANGARAM CLASS.1:02085:022.BearingMandatory Spares.BANGARAM CLASS.1:02085:022.Bearing
261Mandatory Spares.BANGARAM CLASS.1:02051:040.BearingMandatory Spares.BANGARAM CLASS.1:02051:040.Bearing
262Mandatory Spares.BANGARAM CLASS.1:02051:041.BearingMandatory Spares.BANGARAM CLASS.1:02051:041.Bearing
263Mandatory Spares.BANGARAM CLASS.1:02051:042.BearingMandatory Spares.BANGARAM CLASS.1:02051:042.Bearing
264Mandatory Spares.BANGARAM CLASS.1:02051:54.Oil SealMandatory Spares.BANGARAM CLASS.1:02051:54.Oil Seal
265Mandatory Spares.BANGARAM CLASS.1:02051:062.Oil SealMandatory Spares.BANGARAM CLASS.1:02051:062.Oil Seal
266Mandatory Spares.BANGARAM CLASS.1:02048:030.Oil SealMandatory Spares.BANGARAM CLASS.1:02048:030.Oil Seal
267Mandatory Spares.BANGARAM CLASS.1:02048:031.Oil SealMandatory Spares.BANGARAM CLASS.1:02048:031.Oil Seal
268Mandatory Spares.BANGARAM CLASS.1:02048:032.Oil SealMandatory Spares.BANGARAM CLASS.1:02048:032.Oil Seal
269Mandatory Spares.BANGARAM CLASS.1:02051:069.Oil SealMandatory Spares.BANGARAM CLASS.1:02051:069.Oil Seal
270Mandatory Spares.BANGARAM CLASS.1:02048:052.Oil SealMandatory Spares.BANGARAM CLASS.1:02048:052.Oil Seal
271Mandatory Spares.BANGARAM CLASS.1:02045:005.Worm WheelMandatory Spares.BANGARAM CLASS.1:02045:005.Worm Wheel
272Mandatory Spares.BANGARAM CLASS.1:02045:006.Worm ShaftMandatory Spares.BANGARAM CLASS.1:02045:006.Worm Shaft
273Mandatory Spares.BANGARAM CLASS.2:02048:025.Internal CirclipMandatory Spares.BANGARAM CLASS.2:02048:025.Internal Circlip
274Mandatory Spares.BANGARAM CLASS.2:02048:026.External CirclipMandatory Spares.BANGARAM CLASS.2:02048:026.External Circlip
275Mandatory Spares.BANGARAM CLASS.2:02048:028.Drain PlugMandatory Spares.BANGARAM CLASS.2:02048:028.Drain Plug
276Mandatory Spares.BANGARAM CLASS.2:02048:029.oil level indicatorMandatory Spares.BANGARAM CLASS.2:02048:029.oil level indicator
277Mandatory Spares.BANGARAM CLASS.2:02046:012.CSK ScrewMandatory Spares.BANGARAM CLASS.2:02046:012.CSK Screw
278Mandatory Spares.BANGARAM CLASS.2:02085:022.Split PinMandatory Spares.BANGARAM CLASS.2:02085:022.Split Pin
279Mandatory Spares.BANGARAM CLASS.2:02051:040.SpringMandatory Spares.BANGARAM CLASS.2:02051:040.Spring
280Mandatory Spares.BANGARAM CLASS.2:02051:041.External CirclipMandatory Spares.BANGARAM CLASS.2:02051:041.External Circlip
281Mandatory Spares.BANGARAM CLASS.2:02051:069-2.Pinion GearMandatory Spares.BANGARAM CLASS.2:02051:069-2.Pinion Gear
282Mandatory Spares.BANGARAM CLASS.2:02048:052-3.Pinion Gear ShaftMandatory Spares.BANGARAM CLASS.2:02048:052-3.Pinion Gear Shaft
283Mandatory Spares.BANGARAM CLASS.2:02051:54.O RingMandatory Spares.BANGARAM CLASS.2:02051:54.O Ring
284Mandatory Spares.BANGARAM CLASS.2:02051:62.Hex Screw with Spring WasherMandatory Spares.BANGARAM CLASS.2:02051:62.Hex Screw with Spring Washer
285Mandatory Spares.BANGARAM CLASS.2:02048:30.Socket HD CSK ScrewMandatory Spares.BANGARAM CLASS.2:02048:30.Socket HD CSK Screw
286Mandatory Spares.BANGARAM CLASS.2:02048:31.Hex Screw with Spring WasherMandatory Spares.BANGARAM CLASS.2:02048:31.Hex Screw with Spring Washer
287Mandatory Spares.BANGARAM CLASS.2:02048:32.Socket HD BoltMandatory Spares.BANGARAM CLASS.2:02048:32.Socket HD Bolt
288Mandatory Spares.BANGARAM CLASS.2:02051:069.Hex Screw with Spring WasherMandatory Spares.BANGARAM CLASS.2:02051:069.Hex Screw with Spring Washer
289Mandatory Spares.BANGARAM CLASS.2:02048:052.Hex Screw with Spring WasherMandatory Spares.BANGARAM CLASS.2:02048:052.Hex Screw with Spring Washer
290Mandatory Spares.BANGARAM CLASS.2:02045:005.Hex Screw with Spring WasherMandatory Spares.BANGARAM CLASS.2:02045:005.Hex Screw with Spring Washer
291Mandatory Spares.BANGARAM CLASS.2:02045:006.Bush BearingMandatory Spares.BANGARAM CLASS.2:02045:006.Bush Bearing
292Mandatory Spares.BANGARAM CLASS.2:02048:032-1.Thrust Ball BearingMandatory Spares.BANGARAM CLASS.2:02048:032-1.Thrust Ball Bearing
293Mandatory Spares.BANGARAM CLASS.2:02045:006A.Hex:Bolt with Nut and Sp:WasherMandatory Spares.BANGARAM CLASS.2:02045:006A.Hex:Bolt with Nut and Sp:Washer
294Mandatory Spares.BANGARAM CLASS.2:02048:052B.Hex:Bolt with Nut and Sp:WasherMandatory Spares.BANGARAM CLASS.2:02048:052B.Hex:Bolt with Nut and Sp:Washer
295Mandatory Spares.BANGARAM CLASS.2:02045:005C.Hex:Bolt with Nut and Sp:WasherMandatory Spares.BANGARAM CLASS.2:02045:005C.Hex:Bolt with Nut and Sp:Washer
296Mandatory Spares.BANGARAM CLASS.2:02045:0060.Hex:Bolt with Nut and Sp:WasherMandatory Spares.BANGARAM CLASS.2:02045:0060.Hex:Bolt with Nut and Sp:Washer
297Mandatory Spares.BANGARAM CLASS.2:02051-069-2A.Pinion GearMandatory Spares.BANGARAM CLASS.2:02051-069-2A.Pinion Gear
298Mandatory Spares.BANGARAM CLASS.2:02048-052-3A.Pinion Gear ShaftMandatory Spares.BANGARAM CLASS.2:02048-052-3A.Pinion Gear Shaft
299Mandatory Spares.BANGARAM CLASS.1:02045-001A.Worm Wheel for Secondary gear boxMandatory Spares.BANGARAM CLASS.1:02045-001A.Worm Wheel for Secondary gear box
300Mandatory Spares.BANGARAM CLASS.1:02045-001B.Worm Shaft for Secondary gear boxMandatory Spares.BANGARAM CLASS.1:02045-001B.Worm Shaft for Secondary gear box
301Mandatory Spares.BANGARAM CLASS.1:02045-009A.Cylindrical RollersMandatory Spares.BANGARAM CLASS.1:02045-009A.Cylindrical Rollers
302Mandatory Spares.AMMUNITION/GEMINI DAVIT.162280-1.SpringMandatory Spares.AMMUNITION/GEMINI DAVIT.162280-1.Spring
303Mandatory Spares.AMMUNITION/GEMINI DAVIT.162280-2.RatchetMandatory Spares.AMMUNITION/GEMINI DAVIT.162280-2.Ratchet
304Mandatory Spares.AMMUNITION/GEMINI DAVIT.162280-3.Gear/Sector gear/pinionMandatory Spares.AMMUNITION/GEMINI DAVIT.162280-3.Gear/Sector gear/pinion
305Mandatory Spares.AMMUNITION/GEMINI DAVIT.162280-4.Bush BearingMandatory Spares.AMMUNITION/GEMINI DAVIT.162280-4.Bush Bearing
306Mandatory Spares.AMMUNITION/GEMINI DAVIT.162280-5.Foundation bolts/ nuts/ washersMandatory Spares.AMMUNITION/GEMINI DAVIT.162280-5.Foundation bolts/ nuts/ washers
307Mandatory Spares.AMMUNITION/GEMINI DAVIT.162280-6.Locking pin and chainMandatory Spares.AMMUNITION/GEMINI DAVIT.162280-6.Locking pin and chain

AI Tender Summary

OUR REF NO 56682192
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 18-08-2026
Authority
Authority Name Indian Navy
Work Description Bids Are invited for Repair And Overhauling Service - Rc For Repair Overhauling Of Electrical Boat Davit For In Ships; Any Other Suitable Brand; Yes; Buyer Premises - Corvette Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Corvette Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Corvette Class.Whole Single Arm Boat Davit: Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken , Corvette Class.Luffing Gear Box: Dismantling, Defect Identification And Overhauling Of Luffing Gear Box: Which Includes Replacement Of Worn-Out / Damaged Bearings, Screw Shaft, Gears, Pinions, Shafts Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals,Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators, Oil Drain Plug And Fasteners:Ensure For No Oil Lekage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Repair Accordingly: Qc To Be Offeref Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails (Which Includes Load Trails) , Corvette Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Corvette Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Corvette Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism & Manual Hand Operation: Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Corvette Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Corvette Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Corvette Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Corvette Class.After Completion Of Load Test, Re-Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: If Any Flaws Observed Those Flaws Must Be Examined By Ndt Techniques And Accordingly Carry Out Repairs As Necessary And Reoffer To Load Testing Like Wise: , Lst Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Lst Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Lst Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Lst Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Lst Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Lst Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism : Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Lst Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Lst Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Lst Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Lst Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retesting Like Wise: , Delhi Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Delhi Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Delhi Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Delhi Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Delhi Class.Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Delhi Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism : Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Delhi Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Delhi Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Delhi Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Delhi Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Reoffer To Load Testing Like Wise: , Opv Class.Degutting/ Regutting Of The Davit Gear Box From/ To Foudation And Dismantling Of Davit Gear Box For Survey Or Inspection And Gauging Of Its Parts:While Regutting The Davit Suitable Ht Bolts Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation , Opv Class.Hydro Blasting Of Entire Gear Box Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Opv Class.Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Opv Class.Reduction Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Luffing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Screws Shaft, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Opv Class.Charge Oil In Gear Boxes With Servo Gear Oil 140: Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Opv Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Opv Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Opv Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retest , Bangaram Class.Whole Single Arm Boat Davit: Degutting/ Regutting Of Entire Davit From/ To Foundation, Separation/ Detachment Arm And Vertical Column, De-Coupling Of Motors And Gear Boxes And Dismantling Of Its Sub-Assemblies: While Re-Gutting The Davit Suitable Ht Bolts May Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Bangaram Class.Whole Single Arm Boat Davit: Hydro Blasting Of Entire Davit Structure And Sub-Assemblies (To Hpps) To Remove Paint And Arrive At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes And Repair As Per Survey Reports: , Bangaram Class.Whole Single Arm Boat Davit:Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required:In Case Of Repair Of Gearbox Housing, Trueness And Alignment Of Drive And Driven Shaft Also Be Undertaken: , Bangaram Class.Hoisting/Lowering Gear Box And Its Winch: Dismantling, Defect Identification And Overhauling Of Hoisting/Lowering Gear Box And Its Winch: Which Includes Replacement Of Worn Out/ Damaged Bearings, Gears, Pinions, Shafts, Bearing End Covers, Inspection Covers,Bushes, Circlips, Oil Seals, Washers/ Spring Washers/ Thrust Washers, Deadman Weight/Counter Weight, Oil Level Indicators, Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage ,Repair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Bangaram Class.Slewing Arrangement & Slewing Gear Box: Dismantling, Defect Identifiaction And Overhauling Of Slewing Gear Box: Which Includes Replacement Of Worn Out / Damages Bearings, Gears, Slewing Ring Gear (If Installed), Pinions, Shafts, Bearing End Covers, Inspection Covers, Bushes, Circlips, Oil Seals, Cylindrical Rollers, Worn Wheel & Worm Shaft, Washers/ Spring Washers/ Thrust Washers, Oil Level Indicators , Oil Drain Plug And Fastners:Ensure For No Oil Leakage From Gear Box And Its Seals, Any Evidence Of Oil Leakage, Reapair Accordingly: Qc To Be Offered Each And Every Stage Such As Dismantling, Defect Identification, New Spares Inspection, Overhauling And Trails ( Which Includes Load Trails) , Bangaram Class.Clutch Cum Coupling, Centrifugal Brake Unit,Engaging And Dis-Engaging Mechanism & Manual Hand Operation: Dismantling, Defect Identification And Overhauling Of Clutch Cum Coupling, Centrifugal Brake Unit, Engaging And Dis-Engaging Mechanism: Which Includes Replacement/Repair Of Clutch Plates: Qc To Be Offered Before And After Assembly: , Bangaram Class.Charge Oil In Gear Boxes With Servo Gear Oil 140 Or As Specified In The Oem Manual:Charge Grease Into Grease Nipples:Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Bangaram Class.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Bangaram Class.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Bangaram Class.After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: Suspectd Flaws Must Be Examined By Ndt Techniques: Carry Out Repairs As Necessary And Retesting Like Wise: , Ammunition/Gemini Davit.Degutting/ Regutting Of Theammunition/Gemini Davit From/ To Foudation And Dismantling Of Davit For Survey Or Inspection And Gauging Of Its Parts: While Re Gutting The Davit Suitable Ht Bolts Be Used And Proper Care To Be Taken Whilst Tightening The Davit To The Foundation: , Ammunition/Gemini Davit.Hydro Blasting / Sand Blasting Of Entire Davit Structure And Sub-Assemblies To Remove Paint And Attain At Bare Metal Followed By Application Of Primer For Preservation: Survey Davit Structure And Gearboxes For Corrosion, Distortion, Pitting, Holes Etc , Ammunition/Gemini Davit.Carry Out Repair/Renewal Of Structure/ Gear Box Housings As Required: , Ammunition/Gemini Davit.Gear Box : Dismantling, Defect Identification, And Overhauling Of Gear Box And Ratchet Mechanism, Operating Handle End Pulleys/Guiding Pulleys, Springs And Its Bush Bearings All Gears / Sector Gears, Springs Operating Handle, Pulleys To Be Cleaned From Rust And Inspected Same To Be Replaced/ Renewed If Necessary: Qc To Be Offerd Before And After Assembly: , Ammunition/Gemini Davit.Grease All Sheaves, Pivots And Other Moving Parts Of The Davit: , Ammunition/Gemini Davit.Prove Davit For Load Test As Per Oem Specified Standards For Safe And Running Loads: , Ammunition/Gemini Davit.Document All Activities Undertaken With Time And Spares Consumed And Submit The Same: , Ammunition/Gemini Davit.After Completion Of Load Test, Re- Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Deflection Etc: If Any Flaws Observed Those Flaws Must Be Examined By Ndt Techniques And Accordingly Carry Out Repairs As Necessary And Reoffer Tp Load Testing Like Wise: , Mandatory Spares.Corvet Class.7481240.Oil Level Indicator , Mandatory Spares.Corvet Class.7481250.Drain Plug , Mandatory Spares.Corvet Class.7481270.Worm Shaft , Mandatory Spares.Corvet Class.7481271.Key , Mandatory Spares.Corvet Class.7481280.Taper Roller Bearing , Mandatory Spares.Corvet Class.7481315.Oil Seal , Mandatory Spares.Corvet Class.7481340.Worm Wheel , Mandatory Spares.Corvet Class.7481370.Worm Shaft , Mandatory Spares.Corvet Class.7481380.Taper Roller Bearing , Mandatory Spares.Corvet Class.7481430.Worm Wheel , Mandatory Spares.Corvet Class.7481450.Main Shaft , Mandatory Spares.Corvet Class.7481460.Ball Bearing , Mandatory Spares.Corvet Class.7481485.Oil Seal , Mandatory Spares.Corvet Class.7481511.Allen Bolt , Mandatory Spares.Corvet Class.7482220.Coupling , Mandatory Spares.Corvet Class.748235.Oil Seal , Mandatory Spares.Corvet Class.7482350.Oil Level Indicator , Mandatory Spares.Corvet Class.7482370.Worm Shaft , Mandatory Spares.Corvet Class.7482380.Taper Roller Bearing , Mandatory Spares.Corvet Class.7482435.Oil Seal , Mandatory Spares.Corvet Class.7482460.Worm Wheel , Mandatory Spares.Corvet Class.7482470.Worm Shaft , Mandatory Spares.Corvet Class.7482480.Taper Roller Bearing , Mandatory Spares.Corvet Class.7482540.Bearing , Mandatory Spares.Corvet Class.7482560.Main Shaft , Mandatory Spares.Corvet Class.7482610.Pinion , Mandatory Spares.Corvet Class.7482752.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483290.Oil Level Indicator , Mandatory Spares.Corvet Class.7483300.Drain Plug , Mandatory Spares.Corvet Class.7483320.Worm Shaft , Mandatory Spares.Corvet Class.7483330.Taper Roller Bearing , Mandatory Spares.Corvet Class.7483352.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483361.Packing , Mandatory Spares.Corvet Class.7483362.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7483365.Oil Level Indicator , Mandatory Spares.Corvet Class.7483390.Worm Wheel , Mandatory Spares.Corvet Class.7483420.Worm Shaft , Mandatory Spares.Corvet Class.7483430.Taper Roller Bearing , Mandatory Spares.Corvet Class.7486480.Worm Wheel , Mandatory Spares.Corvet Class.7483500.Main Shaft , Mandatory Spares.Corvet Class.7483510.Ball Bearing , Mandatory Spares.Corvet Class.7483535.Oil Seal , Mandatory Spares.Corvet Class.7483625.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7484201.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7484240.Slewing Ring , Mandatory Spares.Corvet Class.7485201.Hex:Bolt + Special Washer , Mandatory Spares.Corvet Class.7485260.Bush Bearing , Mandatory Spares.Corvet Class.7485305.Grease Nipple , Mandatory Spares.Corvet Class.7485350.Bush Bearing , Mandatory Spares.Corvet Class.7485360.Thrust Washer , Mandatory Spares.Corvet Class.7485531.Grease Nipple , Mandatory Spares.Corvet Class.7485720.Sheave , Mandatory Spares.Corvet Class.7485730.Bush Bearing , Mandatory Spares.Corvet Class.7485751.Grease Nipple , Mandatory Spares.Corvet Class.Hew/P-302/Emb-Size 18/9.Spring Washer For Brake Mounting Screw , Mandatory Spares.Corvet Class.7483500A.Screw Shaft , Mandatory Spares.Lst Class.Gew040661754262280.Adapter For Oil Level Indicator , Mandatory Spares.Lst Class.Gew040661754262284.Oil Level Indicator , Mandatory Spares.Lst Class.Gew040661754262290.Adaptor For Drain Plug , Mandatory Spares.Lst Class.Gew040661754262295.Drain Plug , Mandatory Spares.Lst Class.Gew040661754262340.Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262350.Taper Roller Bearing , Mandatory Spares.Lst Class.Gew040661754262360.Bearing Housing Cover , Mandatory Spares.Lst Class.Gew040661754262365.Oil Seal , Mandatory Spares.Lst Class.Gew040661754262410.1St Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262420.Pimion Shaft , Mandatory Spares.Lst Class.Gew040661754262440.Ball Bearing - 6214 , Mandatory Spares.Lst Class.Gew040661754262452.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262462.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262480.Main Shaft , Mandatory Spares.Lst Class.Gew040661754262510.Ball Bearing - 6217 , Mandatory Spares.Lst Class.Gew040661754262522.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262540.Pinion , Mandatory Spares.Lst Class.Gew040661754262550.2Nd Reduction Gear Wheel , Mandatory Spares.Lst Class.Gew040661754262551.Hex:Bolt & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754262581.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754262600.Idler Gear , Mandatory Spares.Lst Class.Gew040661754262610.Ball Bearing 6212 - 2Rs1 , Mandatory Spares.Lst Class.Gew040661754262630.Shaft For Idle Gear , Mandatory Spares.Lst Class.Gew040661754262681.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754262682.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754261330.Ball Bearing , Mandatory Spares.Lst Class.Gew040661754261360.Dog Clutch , Mandatory Spares.Lst Class.Gew040661754261370.Shifter Ring In Hlaves , Mandatory Spares.Lst Class.Gew040661754261385.Hex:Bolt Nut & Sp:Washer , Mandatory Spares.Lst Class.Gew040661754261390.Clutch Engaging Dis Engaging Lever , Mandatory Spares.Lst Class.Gew040661754261400.Bush Bearing , Mandatory Spares.Lst Class.Gew040661754261412.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261421.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261460.Pinion Shaft , Mandatory Spares.Lst Class.Gew040661754261461.Grease Nipple , Mandatory Spares.Lst Class.Gew040661754261483.Oil Seal 80 X 100 X 10 , Mandatory Spares.Lst Class.Gew040661754261490.Ball Bearing Sealed 6212-2Rs1 , Mandatory Spares.Lst Class.Gew040661754261500.Brake Disc , Mandatory Spares.Lst Class.Gew040661754261501.Key , Mandatory Spares.Lst Class.Gew040661754261502.Circlip External , Mandatory Spares.Lst Class.Gew040661754261526.Rivet , Mandatory Spares.Lst Class.Gew040661754261530.Spring , Mandatory Spares.Lst Class.Gew040661754261540.Eccentric , Mandatory Spares.Lst Class.Gew040661754261541.Oil Seal 50 X 65 X 7 , Mandatory Spares.Lst Class.Gew040661754261562.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261595.Lining , Mandatory Spares.Lst Class.Gew040661754261596.Rivet , Mandatory Spares.Lst Class.Gew040661754261630.Dead Man Brake , Mandatory Spares.Lst Class.Gew040661754261660.Pinion Shaft , Mandatory Spares.Lst Class.Gew040661754261671.Key , Mandatory Spares.Lst Class.Gew040661754261680.Ball Bearing 6212 , Mandatory Spares.Lst Class.Gew040661754261685.Ball Bearing 6213 , Mandatory Spares.Lst Class.Gew040661754261692.Csk Screw , Mandatory Spares.Lst Class.Gew040661754261740.Ball Bearing 6224 , Mandatory Spares.Lst Class.Gew040661754261765.Oil Seal 120 X 150 X 12 , Mandatory Spares.Lst Class.Gew040661754261772.Hex: Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261795.Rope Cl , Mandatory Spares.Lst Class.Gew040661754261796.Allen Bolt & Sp Washer , Mandatory Spares.Lst Class.Gew040661754261801.Hex Bolt & Sp: Washer , Mandatory Spares.Lst Class.Gew040661754261495.O Ring , Mandatory Spares.Lst Class.Gew040661754261506.Csk Screw , Mandatory Spares.Delhi Class.7351510.Eccentric , Mandatory Spares.Delhi Class.7353340.Bush Bearing , Mandatory Spares.Delhi Class.7352320.Taper Roller Bearing , Mandatory Spares.Delhi Class.7351255.Ball Bearing , Mandatory Spares.Delhi Class.7351290.Ball Bearing , Mandatory Spares.Delhi Class.7351300.Ball Bearing , Mandatory Spares.Delhi Class.7352620.Ball Bearing , Mandatory Spares.Delhi Class.7352630.Ball Bearing , Mandatory Spares.Delhi Class.7352420.Ball Bearing , Mandatory Spares.Delhi Class.7351650.Ball Bearing , Mandatory Spares.Delhi Class.7351655.Ball Bearing , Mandatory Spares.Delhi Class.7351710.Ball Bearing , Mandatory Spares.Delhi Class.7351496.Rivet , Mandatory Spares.Delhi Class.7351566.Rivet , Mandatory Spares.Delhi Class.7351495.Brake Lining , Mandatory Spares.Delhi Class.7351565.Brake Lining , Mandatory Spares.Delhi Class.7351490.Brake Shoe , Mandatory Spares.Delhi Class.7351385.Oil Seal , Mandatory Spares.Delhi Class.7351452.Oil Seal , Mandatory Spares.Delhi Class.7351511.Oil Seal , Mandatory Spares.Delhi Class.7351735.Oil Seal , Mandatory Spares.Delhi Class.7352475.Oil Seal , Mandatory Spares.Delhi Class.7351330.Clutch , Mandatory Spares.Delhi Class.7351766.Allen Bolts + Washers , Mandatory Spares.Delhi Class.7352711.Allen Bolts + Washers , Mandatory Spares.Delhi Class.7351742.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351212.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351732.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351331.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351382.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7352713.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7352752.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351201.Hex Bolt + Nut + Sp: Washer , Mandatory Spares.Delhi Class.7351102.Hex Bolt + Sp: Washer , Mandatory Spares.Delhi Class.7351431.Graese Nipples , Mandatory Spares.Delhi Class.7352710.Slewing Bearing , Mandatory Spares.Delhi Class.7352670.Pinion , Mandatory Spares.Delhi Class.7351225.Oil Level Indicator , Mandatory Spares.Delhi Class.7351230.Drain Plug , Mandatory Spares.Opv Class.1754262280-1.Adaptor For Oil Level Indicator , Mandatory Spares.Opv Class.1754262280-2.Oil Level Indicator , Mandatory Spares.Opv Class.1754262280-3.Adaptor For Drain Plug , Mandatory Spares.Opv Class.1754262280-4.Drain Plug , Mandatory Spares.Opv Class.1754262280-5.Pinoin Shaft , Mandatory Spares.Opv Class.1754262280-6.Tapper Roller Bearing , Mandatory Spares.Opv Class.1754262280-7.Bearing Housing Cover , Mandatory Spares.Opv Class.1754262280-8.Oil Seal , Mandatory Spares.Opv Class.1754262280-9.Pinoin Shaft , Mandatory Spares.Opv Class.1754262280-10.Gear Wheel , Mandatory Spares.Opv Class.1754262280-11.Ball Bearing , Mandatory Spares.Opv Class.1754262280-12.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-13.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-14.Main Shaft , Mandatory Spares.Opv Class.1754262280-15.Ball Bearing , Mandatory Spares.Opv Class.1754262280-16.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-17.Pinion & Shaft , Mandatory Spares.Opv Class.1754262280-18.Gear Wheel & Shaft , Mandatory Spares.Opv Class.1754262280-19.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-20.Tapper Roller Bearing , Mandatory Spares.Opv Class.1754262280-21.Shaft For Idle Gear , Mandatory Spares.Opv Class.1754262280-22.Ball Bearing , Mandatory Spares.Opv Class.1754262280-23.Dog Clutch , Mandatory Spares.Opv Class.1754262280-24.Hex:Bolt Nut & Sp:Washer , Mandatory Spares.Opv Class.1754262280-25.Clutch Engaging Lever , Mandatory Spares.Opv Class.1754262280-11.Bush Bearing , Mandatory Spares.Opv Class.1754262280-121.Oil Seal 50 X 65 X 7 , Mandatory Spares.Opv Class.1754262280-13.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-15.Lining , Mandatory Spares.Opv Class.1754262280-12.Rivet , Mandatory Spares.Opv Class.1754262280-14.Dead Man Brake , Mandatory Spares.Opv Class.1754262280-16.Pinion Shaft , Mandatory Spares.Opv Class.1754262280-111.Key , Mandatory Spares.Opv Class.1754262280-112.Ball Bearing , Mandatory Spares.Opv Class.1754262280-135.Ball Bearing , Mandatory Spares.Opv Class.1754262280-125.Csk Screw , Mandatory Spares.Opv Class.1754262280-122.Ball Bearing , Mandatory Spares.Opv Class.1754262280-120.Oil Seal 120 X 150 X 12 , Mandatory Spares.Opv Class.1754262280-132.Hex:Bolt & Sp:Washer , Mandatory Spares.Opv Class.1754262280-114.Rope Cl , Mandatory Spares.Bangaram Class.1:02048:025.Bearing , Mandatory Spares.Bangaram Class.1:02048:026.Bearing , Mandatory Spares.Bangaram Class.1:02048:027.Bearing , Mandatory Spares.Bangaram Class.1:02048:028.Bearing , Mandatory Spares.Bangaram Class.1:02048:029.Bearing , Mandatory Spares.Bangaram Class.1:02046:012.Bearing , Mandatory Spares.Bangaram Class.1:02085:022.Bearing , Mandatory Spares.Bangaram Class.1:02051:040.Bearing , Mandatory Spares.Bangaram Class.1:02051:041.Bearing , Mandatory Spares.Bangaram Class.1:02051:042.Bearing , Mandatory Spares.Bangaram Class.1:02051:54.Oil Seal , Mandatory Spares.Bangaram Class.1:02051:062.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:030.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:031.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:032.Oil Seal , Mandatory Spares.Bangaram Class.1:02051:069.Oil Seal , Mandatory Spares.Bangaram Class.1:02048:052.Oil Seal , Mandatory Spares.Bangaram Class.1:02045:005.Worm Wheel , Mandatory Spares.Bangaram Class.1:02045:006.Worm Shaft , Mandatory Spares.Bangaram Class.2:02048:025.Internal Circlip , Mandatory Spares.Bangaram Class.2:02048:026.External Circlip , Mandatory Spares.Bangaram Class.2:02048:028.Drain Plug , Mandatory Spares.Bangaram Class.2:02048:029.Oil Level Indicator , Mandatory Spares.Bangaram Class.2:02046:012.Csk Screw , Mandatory Spares.Bangaram Class.2:02085:022.Split Pin , Mandatory Spares.Bangaram Class.2:02051:040.Spring , Mandatory Spares.Bangaram Class.2:02051:041.External Circlip , Mandatory Spares.Bangaram Class.2:02051:069-2.Pinion Gear , Mandatory Spares.Bangaram Class.2:02048:052-3.Pinion Gear Shaft , Mandatory Spares.Bangaram Class.2:02051:54.O Ring , Mandatory Spares.Bangaram Class.2:02051:62.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:30.Socket Hd Csk Screw , Mandatory Spares.Bangaram Class.2:02048:31.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:32.Socket Hd Bolt , Mandatory Spares.Bangaram Class.2:02051:069.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02048:052.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02045:005.Hex Screw With Spring Washer , Mandatory Spares.Bangaram Class.2:02045:006.Bush Bearing , Mandatory Spares.Bangaram Class.2:02048:032-1.Thrust Ball Bearing , Mandatory Spares.Bangaram Class.2:02045:006A.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02048:052B.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02045:005C.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02045:0060.Hex:Bolt With Nut And Sp:Washer , Mandatory Spares.Bangaram Class.2:02051-069-2A.Pinion Gear , Mandatory Spares.Bangaram Class.2:02048-052-3A.Pinion Gear Shaft , Mandatory Spares.Bangaram Class.1:02045-001A.Worm Wheel For Secondary Gear Box , Mandatory Spares.Bangaram Class.1:02045-001B.Worm Shaft For Secondary Gear Box , Mandatory Spares.Bangaram Class.1:02045-009A.Cylindrical Rollers , Mandatory Spares.Ammunition/Gemini Davit.162280-1.Spring , Mandatory Spares.Ammunition/Gemini Davit.162280-2.Ratchet , Mandatory Spares.Ammunition/Gemini Davit.162280-3.Gear/Sector Gear/Pinion , Mandatory Spares.Ammunition/Gemini Davit.162280-4.Bush Bearing , Mandatory Spares.Ammunition/Gemini Davit.162280-5.Foundation Bolts/ Nuts/ Washers , Mandatory Spares.Ammunition/Gemini Davit.162280-6.Locking Pin And Chain
Basic Detail
Tender No GEM/2026/B/7773144
Bidding Type Tender
Location
City Visakhapatnam
State Andhra Pradesh
Key Dates
Publish Date 27 Jul 2026
Submission Date 18 Aug 2026
Open Date 18 Aug 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 21.51 Lakhs
Exemption Not Available
Document List
8c216d2f-7448-4d0b-978f-ce7559e131dd.pdf
1783684681.xlsx
1785133692.pdf
1785133699.pdf
1785133705.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Aug 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
pdf

8c216d2f-7448-4d0b-978f-ce7559e131dd.pdf

xlsx

1783684681.xlsx

pdf

1785133692.pdf

pdf

1785133699.pdf

pdf

1785133705.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders