Tender For Provn Of Solid Waste Management Infrastructure At Kota Mil Stn
Tender Value
2.96 Crore
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
3.71 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Solid Waste Management Infrastructure At Kota Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Schedule \\"A\\" \\"BUILDING WORKS\\" PART I is not prepriced by MES and prepriced rate indicates 0.0 under Column 5 signifies this fact only.Design, fabrication, erection and construction of PEB structure of clear span (50mX25m) and height 6m with corrugated coloured roof sheeting including brick wall of height 1.5m on the all sides with PCC flooring and 02 Nos MS gates complete all as specified and as shown in drawings |
| 2 | Lump sum price worked out by the contractor for \\"INTERNAL ELECTRIFICATION\\" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 3 | Lump sum price worked out by the contractor for \\"ROAD AND HARD STANDING\\" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 4 | Lump sum price worked out by the contractor for \\"AREA DRAINAGE\\" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 5 | Lump sum price worked out by the contractor for \\"FENCING \\" as listed in Schedule ‘A’ Part-V\\" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 6 | Lump sum price worked out by the contractor for \\"EXTERNAL WATER SUPPLY\\" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES |
| 7 | Lump sum price worked out by the contractor for \\"EXTERNAL ELECTRIFICATION\\" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES |
| 8 | Lump sum price worked out by the contractor for \\"SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK\\" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES |
| 9 | Sch 'A' Part-IX MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-VIII SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK schedule). |
| 10 | INTERNAL ELECTRIFICATIONS&F for modular type 1 blanking plate etc complete all as specified and directed |
| 11 | S&F for LED industrial lighting 120 Watt round higbay in PDC housing suitable for industrial application and efficacy up to 130 to 150 LPW, SPD included, IP 65 with necessary fixtures required for mounting the light, suitable brackets, nuts, bolts and fixing PVC conduit for cable/ wire protection upto PVC terminal box etc complete all as specified and directed |
| 12 | S&F for 4 Pole MCCB 63 to 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA etc complete all as specified and directed |
| 13 | ROAD AND HARDSTANDINGSupplying and laying 150 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over tack/sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm etc complete all as specified & directed Note : (i) Portion of overlaping of sheet may not considered for payment purpose, however overlaping shall be provided as specified and directed. |
| 14 | FENCING S&F punched tape concertina coil galvanished 610mm dia including securing tying at crossing with and provision of galvanished mild steel wire staples or steel pins etc complete all as specified and directed. |
| 15 | M&L for steel gate 5.45m wide and 2.70m height with RCC pillar including excavation in any type soil, plastering, painting etc, complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3. Please Enable Macros to View BoQ information |
| 16 | M&L for steel gate 5.45m wide and 2.70m height with RCC pillar including excavation in any type soil, plastering, painting etc, complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender