Tender For Improvement & Upgradation Road Sessa Tiniali Garudharia Gaon Itakhuli From Ch 0.00 Km ( Sessa Tiniali At Nh-37) To Ch 14.20 Km (Itakhuli) Under Asom Mala 2.0 For The Year 2023-24. (Construction Of Assam Type Residential Building Of Additio
Tender Value
11.52 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
13 days left
EMD
23100
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement & Upgradation Road Sessa Tiniali Garudharia Gaon Itakhuli From Ch 0.00 Km ( Sessa Tiniali At Nh-37) To Ch 14.20 Km (Itakhuli) Under Asom Mala 2.0 For The Year 2023-24. (Construction Of Assam Type Residential Building Of Additional Chief Engineer, Pwrd, Eastern Zone,Dibrugarh) ( Part - I)
BOQ
| Sl. No. | Item Description |
| 1 | SANITARY AND WATER SUPPLY17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 2 | 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 3 | 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 4 | 17.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe40 mm dia |
| 5 | 17.10.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 6 | 18.9.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work40 mm nominal dia Pipes |
| 7 | 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work40 mm nominal dia Pipes |
| 8 | 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc.15 mm nominal dia Pipes |
| 9 | 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc.20 mm nominal dia Pipes |
| 10 | 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc.25 mm nominal dia Pipes |
| 11 | 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 12 | 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 13 | 18.18.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore |
| 14 | 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore |
| 15 | 18.19.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal boreHorizontal |
| 16 | 18.19.1.2 Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal borevertical |
| 17 | 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore |
| 18 | 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter |
| 19 | 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 20 | 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 21 | 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 22 | 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 23 | 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 24 | 17.34.1 Providing and fixing toilet paper holder :C.P. Brass |
| 25 | SEPTIC TANK2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1 All kinds of soil.(a) In ordinary soil |
| 26 | 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 27 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 28 | 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) |
| 29 | 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 30 | 5.9 Centering and shuttering including strutting, propping etc. and removal of form for5.9.1 Foundations, footings, bases of columns, etc. for mass concreteFoundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(b) Using 38mm thick plank |
| 31 | 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:13.5.1 1:4 (1 cement: 4 coarse sand) |
| 32 | 11.6.1 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick |
| 33 | 11.4 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 34 | 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 35 | FURNITURESupplying fitting and fixing single bed (1850x1100) made out of 19 mm thick block board (green ply)finished with 12mm lamination of approved colour and texure using approved brand of adhesive along with head board finished with foam,latherite,laminates & 200 thick high density Sleepwell Matress and pillow. |
| 36 | Supplying fitting and fixing 6 seater dining table (Glass top) with 6 chair made of teak wood and fixed cushions of high density foam and approved brand of latherite. |
| 37 | Supplying fitting and fixing tea table made of teak wood finished with high quality varnishing. |
| 38 | Supplying fitting and fixing combined Wooden almirah ,luggage rack and writing table made out of 19 mm thick block board (green ply)finished with 12mm lamination of approved colour and texure using approved brand of adhesive along with all hardware fitting,nail screw etc. complete. |
| 39 | Supplying side table (500x500x450) made out of 19 mm thick block board (green ply)finished with 12mm lamination of approved colour and texure using approved brand of adhesive along with one drawer including all hardware fitting s complete. |
| 40 | Providing and supplying in position readymade wooden (varnished) chair with back rest finished with super high density foam(40) cushioned finished with approved upholstery with frame made of 1st class season timber with as per Engineer in charge. |
| 41 | Providing and supplying in position readymade sofa with back rest and arm rest finished with super high density foam (40) finished with approved upholstery with frame made of 1st class season timber /SS frame with as per Engineer in charge. A) single seater |
| 42 | Providing and supplying in position readymade sofa with back rest and arm rest finished with super high density foam (40) finished with approved upholstery with frame made of 1st class season timber /SS frame with as per Engineer in charge. A) two seater. |
| 43 | Internal ElectrificationProviding Supply & installation of Internal Electrification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender