Tender For General-Rm 2026-27 / Rc 2 / Zone Iii-One Year Running Contract For Various Pwd Roads Under Road Section Kuruvilangadu In Kottayam District. 11 Road Stretches For A Length Of 35.86 Km-General Civil Work
Tender Value
76.91 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
3 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kottayam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Rm 2026-27 / Rc 2 / Zone Iii-One Year Running Contract For Various Pwd Roads Under Road Section Kuruvilangadu In Kottayam District. 11 Road Stretches For A Length Of 35.86 Km-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Appendix -A Reactive Maintenance(Initial Rectification work |
| 2 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 3 | 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) |
| 4 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 5 | OD262215/2025-2026:##l Filling up pot holes (cut and formed to regular shapes and all looseand defective materials removed) after supplying a prime coat of hot bitumen using 12mmdepartmental broken stone and compacting with power roller to get a compact surface |
| 6 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 7 | OD262216/2025-2026:MORD - Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness composed of 11.2 mm to 0.09 mm (Type-A) OR 13.2mm to 0.9 mm (Type - B) aggregates usingpenetration grade bitumen using VG 30 to the required line, grade and level to serve as wearing course on apreviously prepared base, including mixing in a suitable plant, laying and rolling with a three wheeled roller 8-10KN static roller and finishing to required level and grade as per Technical specification clause 509 of MORD -Bitumen @22 kg / 10 m2.... |
| 8 | OD262217/2025-2026:Providing and fixing of DLP board for Running contract work with Non-retro-reflectorisedVinyl sign with 1 years warranty manufactured Vinyl Printed sheeting fixed over aluminumsheeting 2 mm thick/ aluminium composit material sheeting 4 mm thick with area notexceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported onGI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properlydesigned foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cmbelow ground level including painting all exposed surface with 2 coats of epoxy painting overepoxy primer and as per approved drawing and clause 801 including lettering symbols etc |
| 9 | OD262218/2025-2026:Providing and fixing of vinyl printed sticker over existing running contract information boardnon-retro-reflectorized Vinyl sign with 1 year warranty manufactured Vinyl Printed sheetincluding lettering symbols etc |
| 10 | Apeendix -B Pre mansoon Works |
| 11 | OD262206/2025-2026: Engaging Man Mazdoor for clearing Drain and culvert |
| 12 | OD262210/2025-2026:Wood cutter for cutting branches of trees to dangerous to public |
| 13 | OD262211/2025-2026:Engaging hydraulic excavator |
| 14 | OD262207/2025-2026:Hire and running charges of tipper |
| 15 | 2.3.2.B:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of thorny jungle - By Mechanical Means |
| 16 | OD262209/2025-2026:Filling up pot holes (cut and formed to regular shapes and all loose defective materialsremoved) after supplying a tack coat of bitumen emulsion using packed cold mix andcompacting manually to get a compact surface |
| 17 | Appendix -C Protective Maintenance |
| 18 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 19 | 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) |
| 20 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 21 | OD262213/2025-2026:##l Filling up pot holes (cut and formed to regular shapes and all looseand defective materials removed) after supplying a prime coat of hot bitumen using 12mmdepartmental broken stone and compacting with power roller to get a compact surface |
| 22 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 23 | OD262214/2025-2026:MORD - Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness composed of 11.2 mm to 0.09 mm (Type-A) OR 13.2mm to 0.9 mm (Type - B) aggregates usingpenetration grade bitumen using VG 30 to the required line, grade and level to serve as wearing course on apreviously prepared base, including mixing in a suitable plant, laying and rolling with a three wheeled roller 8-10KN static roller and finishing to required level and grade as per Technical specification clause 509 of MORD -Bitumen @22 kg / 10 m2.... |
| 24 | OD262212/2025-2026:Engaging labour with passenger car not less than1000 cc for Conducting and reporting routine inspection up to 20Km per day for the entire length of project road at a frequency of 7 days throughout the agreeement period of running contract as directed by the departmental officers. |
| 25 | 55.38a:Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on Structural Steel c section vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of structural steel c section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3. |
| 26 | 8.6:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 High Intensity Micro Prismatic (Type IV) grade sheeting fixed over aluminum sheeting, 2 mm thick/aluminum composite material sheeting 4 mm thick with an area exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on suitably designed GI pipe pole not less than 50mm NB , 2 Nos. confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. |
| 27 | 3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m |
| 28 | 9.1:Plain cement concrete 1:3:6 mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days |
| 29 | 12.8.A:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M15 ( Without formwork) |
| 30 | 12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer |
| 31 | 12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15 |
| 32 | 12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications |
| 33 | 8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :- |
| 34 | 8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes. |
| 35 | 55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm |
| 36 | 8.15:Supplying and installation of delineator (Roadway indicators) posts 80- 100cm high above ground level, pained black, and white in 15 cm wide strips, fitted with min. 80 x 100 mm rectangular or 75 mm dia circular retro reflectorized panels at the top with minimum visibility of 300m with provisions to prevent edge lifting and vandalisam, and conforming to clause 806 , IRC-79 and the drawings including fixing to ground (The deleniator shall be of approved type as per specification) |
| 37 | Apeendix -D Emergency Works |
| 38 | OD262202/2025-2026: Engaging Man Mazdoor for clearing Drain and culvert |
| 39 | OD262205/2025-2026:Wood cutter for cutting branches of trees to dangerous to public |
| 40 | OD262204/2025-2026:Engaging hydraulic excavator |
| 41 | OD262203/2025-2026:Hire and running charges of tipper |
| 42 | 3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m |
| 43 | OD266731/2025-2026:Dry rubble masonry for foundation and superstructure of retaining wall including cost conveyance and labour charges etc. complete. |
| 44 | 12.7.B:Random Rubble Masonry (coursed/uncoursed ) Work in Cement Mortar 1:3 in Foundation complete as per Drawing and Technical Specifications. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender