Tender For Providing Of Modular Kitchen With Chimney And Certain Minor Works At Af Stn Dadri Under Aor Of Ge (Af) Faridabad
Tender Value
47.04 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
18 days left
EMD
94080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Modular Kitchen With Chimney And Certain Minor Works At Af Stn Dadri Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | M&L for first quality glazed ceramic coloured tiles of 300 x 600 x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10 mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed. |
| 2 | M&L for non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sqm, laid in floors with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. |
| 3 | M&L for PCC 1:2:4, type B1 using 20mm graded agg. in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. |
| 4 | M&L for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 5 | M&L for 20 mm thick granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 20 mm thick backing in CM (1:6) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed. |
| 6 | S&F for 18mm thick Marine Plywood IS-710 grade waterproof sheet in Door, Shelves for Cup Boards or Kitchen Cabinets, incl necessary fixing arragement, jointed by means of adhesive solvent and fixed using self-tapping aluminium screws, complete all as specified and directed. |
| 7 | S&F for 0.8mm to 1mm thick balancer sheet for fixing at plywood board as plain or white colour incl edge lamination as required, complete all as specified and directed. |
| 8 | S&F for 1mm to 1.5mm thick high gloss acrylic sheet in any colour / texture (as approved) incl edge lamination as required incl all adhesive, complete all as specified and directed. Note : Acrylic sheet to be be fixed as factory fitted machine pressed on Marine Plywood. |
| 9 | S&F for stainless steel thick cabinet soft close hinges full overlay to fix at Ply Board cabinet doors for easy and soft movement, complete all as specified and directed. |
| 10 | S&F for 18lb/80N Hydraulic Gas strut lift support cabinet hinge for kitchen cupboard fix to plywood board cabinet doors for easy movement, complete all as specified and directed. |
| 11 | S&F for 'G' Section profile handle made of anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) for kitchen cupboard fix to plywood board cabinet doors for easy movement, complete all as specified and directed. |
| 12 | S&F for 450mm / 600mm Telescopic Drawer Channel fitted to Celuka Ply Board and Stainless Steel Basket for smooth movement, complete all as specified and directed. |
| 13 | S&F for Stainless Steel Cup and Saucer Basket of size (480x508x100mm) and fitted to a Telescopic Drawer Channel and fixed to Ply Board with smooth movement, complete all as specified and directed. |
| 14 | S&F for Stainless Steel Perforated Cutlery Basket of size (480x508x100mm) and fitted to a Telescopic Drawer Channel and fixed to Ply Board with smooth movement, complete all as specified and directed. |
| 15 | S&F for Stainless Steel Thali Plate Basket of size (480x508x150mm) and fitted to a Telescopic Drawer Channel and fix to Ply Board with smooth movement, complete all as specified and directed. |
| 16 | S&F for Stainless Steel Grain Trolley of size (480x508x350mm) and fitted to a Telescopic Drawer Channel and fixed to Ply Board with smooth movement, complete all as specified and directed. |
| 17 | S&F for Innotech 470mm Drawer set silver loading capacity 30kg incl complete set as 1 drawer side profile, left & right, 2 front connectors for drawer side profile, 2 cover caps grey plastic, 1 rear pannel connector, left and right, 1 quardo silent, left & right complete all as specified and directed. |
| 18 | M&L for cutting holes into or through brick walls built in cement mortar andmaking good in cement mortar 1:3 or cement concrete 1:2:4 type B-l asrequired, complete all as specified and directed. |
| 19 | S&F for 40 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed. |
| 20 | S&F for 100 mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet shutters, complete all as specified and directed. |
| 21 | S&F for magnetic catches for cabinets of size 50 mm x 15 mm complete with striking plate & magnetic stud, complete all as specified and directed. |
| 22 | S&F for steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. |
| 23 | S&F for steel water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. |
| 24 | S&F for stop valve/ angle valve 15 mm dia, chromium plated brass, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair, complete all as specified and directed. |
| 25 | S&F for 15 mm bore, wall mounted brass CP sink mixer with swan neck suitable for kitchen of approved shape & design for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 26 | S&F for stainless steel grating doom 125 mm dia with waste hole complete all as specified and directed. |
| 27 | S&F for double bowl sinks of size 750 x 460 x 250mm made of stainless steel 1mm thick suitable for kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and directed. |
| 28 | S&F for stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet, of size 90cm x 60cm x 25cm with all internal fittings of appoved make complete all as specified and directed. |
| 29 | S&F for rotational moulded PVC, tripple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve, complete all as specified and directed. |
| 30 | M&L for factory Made 30mm thick 100% Solid WPC (Wood polymer Composite) Laminated Flush Door Shutter (Decorative) of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Exfruded (Inner) with having minimum density not less than 650 klcbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000N (Face) & lt00N (Edge), Minimum Compissive of 50Nlmm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimurn I4 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufucturing company. |
| 31 | M&L for factory made 100% Solid WPC wood Polymer Composite) door frame 100 x 65 mm Single Rebated made from wood Polymer Composite (Single Extruded Process) material comparrstng of, virgin PVC polymer of K 57-60 Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/cbm & manufactured by an ISO 900 2015 Certified Company, having a good screw holding capacity (Screw Withdrawal strength of Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite/borer proof water/Moisture Proof & Fire retardant & fixed in position with SS Dash fasteners/Holdfast dia and length, all as per specifications & drawings as directed by the Engineer- in Charge. Material test certificate and authentication should be compulsory provided by the manufucturing company. |
| 32 | S&F for ECO 2000 series Approx size of 0.90 m x 1.20 m (Elixir/NCL SECCOLOR) Roll framed galvanised pre painted steel section windows/ventilators including provision of grills, 5 mm thick glass and SS wiremesh specification and drawing as per CE (AF) WAC, Palam, Sheet No -1/2 and 2/2 of drawing No - CEAF/STD -191/2014 etc., complete all as specified and directed by Engineer-in-Charge.(a) Fixing details : Frame and shutter frame sections should be cut to length and mittred joined with poly propylene corner brackets, mullion section should be joined with frame/mullion using nylon mullion cap, ethyl propyllene diamene monomer (EPDM) gasket should be used all around glass in shutter and fixed glass. Rubber gasket should be used around the fly mesh to fix mesh in mesh shutter.(b) Accessories : Each Glazed shutter should be provided with MS powder coated friction hinges, high grade aluminium powder coateed handle -1 for each shutter(c) Glass shutters having fixed glass shall be 5 mm thick orion blue (ET725) GLASS, having U value of 3.85 W/sqm K, light transmission factor of 18% and solar radiation factor of 0.23 (d) Windows should be provided with grill made of 10mm Square MS Bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws.(e) Window frame should be fixed to brick/concrete masonry by using nylons self expanding caps and driving MS electroplated 80 mm long screws into the caps through frames.(f) Mesh shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per Sqr.inch. |
| 33 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc complete all as specified and directed. |
| 34 | M&L for Point wiring for one light point using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.Note- Modular Switch and sockets will be measured and paid seperately. |
| 35 | All as per item 34 above but for one fan point controlled by one switch through regulator. |
| 36 | All as per item 34 above but for one 5 pin 5 amps socket outlet on the independent board. |
| 37 | All as per item 34 above but for one 3 pin 5 amps socket outlet on the same board |
| 38 | All as per item 34 above but for Call bell point. |
| 39 | All as per item 34 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS complete all as specified and directed. Note :- Only one 15 Amp point will be in one circuit. |
| 40 | S & F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC complete all as specified and directed. |
| 41 | S & F Modular Socket, 6A - 2/3 pin combined 2 module, suitable for 240 volt AC complete all as specified and directed. |
| 42 | S&F Modular switch 1 way 16A, 1 modules suitable for 240 volt AC complete all as specified and directed. |
| 43 | S & F Modular Socket, 16A 2/3 pin combined 2 module, suitable for 240 volt AC complete all as specified and directed. |
| 44 | Supply and fix Modular bell push 1 Module 5 Amps suitable for 240 volt complete all as specified and directed. |
| 45 | Supply and fixing only in replacement Electric calling Bell Ding Ding Type suitable for 230 volts complete all as specified and directed. |
| 46 | Supply and fixing in replacement ceiling roses, surface bakelite 65x50mm ,3 terminals 3 phase, PVC/Polycarbonate, isolated body complete all as specified and directed. |
| 47 | Supply and fixing only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed. |
| 48 | Supply and fixing only surface mounted round shape 15 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 49 | Supply and fixing only replacement of exhaust fan heady duty metal body 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and directed. |
| 50 | S&F electric Wall Mounted electric Chimney 60 cm 1500 m³/hr BLDC Filterless Thermal Autoclean Kitchen Chimney, Curved Glass with Aeration technology, Touch and Gesture Control,Black Suitable for 2-4 Burners with 3D Filter and Suction Power. Made up of Material: Stainless Steel Body EDS3 Technology, Deep Silence Mechanism, LED Lamp with 1 Year Warranty including complete electric connection as per site requirement complete all as specified and directed. |
| 51 | Supply and fixing only in replacement of wall mounting fan heady duty 400 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Model No- Swing Penta Wall Fan. |
| 52 | Supply,install test & commmissioning of high wall mounted inverter type split AC ,having indoor and outdoor units with copper tube evaporator & condensing unit of capacity 2 Ton capacity complete with cordless remote control unit and with minimum 5 star rated and EER 5.05 with necessary fixing arrangements,drain water piep upto required length ,stand for outdoor unit ,with 3 core PVC insulated and PVC sheathed copper cable of required size including taking down and submitting to the MES store safely complete all as specified and directed. |
| 53 | S&F in replacement refrigerant line copper tube1/2\\" bore incl insulation of AC pipe complete all as specified and directed. |
| 54 | S&F in replacement refrigerant line copper tube 1/4\\" bore incl insulation of AC pipe complete all as specified and directed. |
| 55 | Supply & Fixing in replacement of PVC pipe of size 20 mm dia fixing on wall by using clamps and screwing including necessary tee, collar ,bend,socket etc complete all as specified and directed. |
| 56 | M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 4.0 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 4.0 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. |
| 57 | Supply and fixing of single pole and neutral enclosure 240 Volts with two pin and earth plug and socket complete with one single pole MCB of 20 Amps rating complete all as specified and directed. |
| 58 | Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V t0 250 V with output voltage stablized at 230 volt with accuracy +2.5 % and capacity 5 KVA complete all as specified and directed. |
| 59 | Supply installation & testing earthing in soft/hard soil area of Burnished metal copper earthing electrode 50mm dia 3 Mtr long, outer dia 50 mm 3 Mtr long with strip terminal 40x5mm, 90mm length with 2 holes of10mm with the pipe thickness of 1.2 mm non exothermic welding, inner electrode 16mm solid rod, filled with highly conductive compound non corrosive non hydroxylation Inclusive of 2 bag of Chemical earthing electrode 50 kgs, 25kg bag each with the chemical composition Carbon as graphite 80%, AI203 18-32%, FE203 4-11%, CALCIUM,CARCBON, COPPER 10 to 15 %. Moisture Content 1.06%, chloride 300ppm, cadmium not detected, antimony 100pm complete all as specified and directed. |
| 60 | M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including 4 mm dia as earth lead wire by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate NO 5 of SSR Part I (1991) and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified Note :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. Note :- PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in liew of CI) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender