Tender For Providing Of Weather Shelter At 230Su
Tender Value
43.58 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
0 days left
EMD
87178
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Weather Shelter At 230Su
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Jul-2026 | CORRIGENDUM NO 1 | BOQ | 14-Aug-2026 |
| 2 | 14-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas,n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed |
| 2 | M&L for excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc. or shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10sqm on plan and n.exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed |
| 3 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete, subbase complete all as specified and as directed. |
| 4 | M&L RCC M-25 (using 20mm graded aggregate) as Foundations, including rafts,footings, foundation beams;plinth beams; bases forcolumns, etc.; basement slabs,under-reamed piles and mass concretcomplete all as specified and as directed. |
| 5 | M&L RCC M-25 (using 20mm graded aggregate) as Columns, pillars, piers, posts and strutscomplete all as specified and as directed. |
| 6 | M&L RCC M-25(using 20mm graded aggregate) as beams,cantilivers,bressummers,lintels over 1.5 m span complete all as specified and as directed. |
| 7 | Returnig, filling in, incl spreading, leveling watering and well ramming in layers not exc 25 cm thick above or below ground level complete all as specified and as directed |
| 8 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed |
| 9 | M&L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter in flat surfaces rough finished complete all as specified and as directed |
| 10 | M&L for steel formwork to sides of pillars posts, struts, piers, columns and stanchions rough finished complete all as specified and as directed |
| 11 | M&L for TMT bars mild steel bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 12 | M&L for TMT bars mild steel bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed |
| 13 | M&L for Brick work built in cement mortar 1:6 using old size sub class \\"B\\" bricks in wall straight or curved on plan exc 6m mean radius complete all as specified and directed . |
| 14 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:4, complete all as specified and as directed |
| 15 | M & L Rendering 10mm thick on fair faces of brick work in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed. |
| 16 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paints over a coat of primer complete all as specified and as directed. |
| 17 | M&L preparing New plastered surfaces on walls one coat of primer paint, and applying two coat of oil bound distemper with 1 mm wall care putty complete all as specified directed. |
| 18 | S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed. |
| 19 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in ridges/ corners to wall , fixed with self tapping screws complete all as specified and directed. |
| 20 | S&F steel work in tubular trusses including (purlins and rafters) special shaped washers etc complete using ERW or imnduction butt welded tubes complete all as specified and directed. . |
| 21 | M&L for preparation of new steel surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 22 | S/F MS plates (plain/chequred) channel square cut or not ordiar and counter sunk) forming without any attachment FE 290 Gde E-165 complete all as specified. |
| 23 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed. |
| 24 | M&L for Plain cement concrete 70 mm thick ,type B-1, 1:2:4 using 20 mm graded stone aggregate as in flooring/pavings ,concrete to be laid in alternate layers complete all as specified and directed by Engr in charge. |
| 25 | Pressed steel frames for doors of size 105mm x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and applying a shop coat of red oxide primer complete all as specified and dirtected |
| 26 | S&F 30 mm thick factory made flush shutters ,solid core construction ,with block board core and plywood face panel,commercial type on both sides inluding filling back of frames with concrete complete all as specified and directed |
| 27 | S& F 125 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed |
| 28 | S&F 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 29 | S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed |
| 30 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 31 | M&L for Surfaces of any description, not otherwise described over 10cm width or girth after prepration of new surfaces with two coat of synthetic enamal paint over a coat of primer complete all as specified and directed |
| 32 | M&L for Plain cement concrete 75 mm thick ,type C-2, 1:3:6 using 20 mm graded stone aggregate as in plinth protection,complete all as specified. Please Enable Macros to View BoQ information |
| 33 | M&L for Plain cement concrete 75 mm thick ,type C-2, 1:3:6 using 20 mm graded stone aggregate as in plinth protection,complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender