Tender For Special Repairs To Bldg No T-854/1 And 12X Or Md Accn (Bldg No P-417) At Karam Singh Enclave Against (Job No.81 Sa/Btd/Sr (Bldg)-24/2025-26 & Job No.81 Sa/Btd/Sr (Bldg)-31/2025-26 Under Ge South At Bathinda Mil Stn
Tender Value
1.36 Crore
Estimated cost
Bid Submission
25 Aug 2026
14 days left
EMD
2.12 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No T-854/1 And 12X Or Md Accn (Bldg No P-417) At Karam Singh Enclave Against (Job No.81 Sa/Btd/Sr (Bldg)-24/2025-26 & Job No.81 Sa/Btd/Sr (Bldg)-31/2025-26 Under Ge South At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Water proofing treatment on old rcc roof slab(i)Cleaning of surface of loose dust,and dirt and cement slurry etc. by means of wire brush, dust removing brush and scrapper etc. Pot holes/cracks shall be repaired with cement admixed with polymer as per manufactures instruction.(ii) The surface shall be treated with seal and dry SBR Stryrene Butadiene Copolymer latex with multipurpose application, bonding agent, as waterproofing coating etc. with multipurpose to seal the pores and enhance the adhesive of the coating(iii) Material and labour for 15 mm thick rendering in CM (1:3) over roof surface after application of primer coat as per Sr No (ii)(iv) Applying a self primer coat of Ultra Tech Weather Pro Top Shield (12 years Warranty) mixing 30% of water over plastered surface and followed by three Undiluted coats.(v) Allow the prime coat of Top Shield to dry for 4-6 hrs and apply the undiluted coat in a grid size of 1 sq.m at the rate of 0.4-0.5L per sq.m per coat using a brush or roller in uni-direction(vi) Allow the base coat of Top Shield to dry for 4-6 hrs and apply and undiluted mid coat and the top coat in perpendicular direction to the previous coat at the sasme rate of coverage as the base coat. Allow 4-6 hrs of drying time between subsquent coats. (vii) The above grid method application will ensure achieving of 900-1000 microns Dry Film Thickness(viii) Allow the coating to air cure for a minimum of 7 days. Note - Cost of applicator and its gaurantee is included in the coated rates |
| 2 | Dismantling/ taking down APP membrane or any kind of roof treatment up to the RCC slab including plastering and leeping (whether full thickness removed or only a part there of disposal off rubbish upto a distance not exceeding 500.00 mtr where directed) complete all as specified and directed by Engineer-in-charge |
| 3 | Material and Labour PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair and maintain roof slope during the execution of work including Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 5 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 6 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant.WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel but hinges of required size with necessary fukk body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge including Supply & Fixing of following items:(a) Stainlss steel (304grade) finished butt hinges 100mm-04 Nos per leaf (Table 6 of BIS 12817-2020) BIS Marked.(b) Stainlss steel (304grade) finished Tower bolt 200mm long-02 Nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833.(c) Stainlss steel (304grade) finished Sliding Bolt 300mm -01 Nos per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainlss steel (304grade) finished Floor Door Stopper -01 Nos per Leaf. |
| 7 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length complete as per direction of Engineer-in-Charge.(M.S. Hold fast/Lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door /window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 8 | Providing and fixing factory made uPVC white colourcasement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+-0.2mm). Windowprofile with hollow section with mititi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be miteredcut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage ofwater etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steelFrame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in requiredprofile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement doorhandle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Doortransmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludescost of glass and includes all other connectedaccessories Net opening will be measured forpayment purpose) |
| 9 | Providing and fixing factory made uPVC white colour fixed window /ventilators made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+-0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 0mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete, icluding upvc grill for clear opening as per window opening (Note: The unit rate quoted by contractor encludes cost of tinted glass 5.0 mm thick glass, upvc grill (as per approved sample), Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc and all other connected accessories. like handle, tower nolt, rollers, hinges etc |
| 10 | Supply & fixing 4.8mm thick tinted glass fixed to doors and windows as per site requirement or as per directed by Engr-In-Charge. |
| 11 | Supply & fixing sheet glass, selected quality 5.5 mm thick glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge. |
| 12 | Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks to stainless steel wire staple complete all as specified and as directed by Engineer-in-charge. |
| 13 | Hacking out old broken glass (anythickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with puttyy or fixed with beads complete. |
| 14 | Material and labour for vitrified Ceramic tiles 8-9 mm thick light shade (square/ rectangular) polished, double charged, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in 10 mm thick tile adhesive complete and pointed in epoxy grouting material as per manufacturers instruction to match the tile shed including dismantling of old tile and removing the rubbish/ demolished material all as specified and directed |
| 15 | Material and Labour for Non Skid coloured ceramic tiles 7.0mm to 8.0mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.38 Sqm (preferbaly size 600*600mm) in floors including 10 mm thick bedding layer using type-I adhesive confirming to IS-15477:2004 and pointed in epoxy grouting material as per manufacturers instruction to match the shade of tile including necessary cutting as per site requirement and dismantling of old tile and removing the rubbish/demolished material all as specified and directed. |
| 16 | Material and Labour glazed ceramic coloured tiles 7-8 mm thick 600mm x 300mm size in verticle surface laid over with and including 10mm thick bedding layer using type-I adhesive (thick bed fixing) over and including 10mm thick cement plaster in CM 1:4 complete, and pointed in epoxy grouting material as per manufacturers instruction to match the shade of tile including necessary cutting as per site requirement and dismantling of old tile and removing the rubbish/demolished material all as specified and directed. |
| 17 | Material and labour 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in sub base of bathroom floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and as directed by Engineer-in- charge. |
| 18 | Material and labour 25mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in sub base of bathroom floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and as directed by Engineer-in- charge. |
| 19 | Material and Labour for 40mm average thick PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair using Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ. |
| 20 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including rounding to edges of stone slabs one edges, sucg as in steps, cooking plateform and other similar situations complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Material and labour for solid PVC Wall lining consisting of 5mm thick plain color PVC sheet inclusive of solvent cement and fixing atsite on PVC frame as per specification and drawing complete all as specified and as directed by Engineer-in- charge. |
| 22 | Material and labour for suspended false ceiling consisting of suitable anodised alumiumum sections of 'Tee' of size not lesss than 22.50 x 22.5 x 0.5 mm Angle of size 22.5 x 22.5 x 0.5 mm & FI as per std engineering practices with 'E' board ceiling boards 4 mm thick in grid of 605 x 605 mm including cutting holes and making good holes for main joist, suspending with 6 mm dia GI wire to roof trusses, purling & rafters etc all as specified and directed. Please Enable Macros to View BoQ information |
| 23 | Material and labour for suspended false ceiling consisting of suitable anodised alumiumum sections of 'Tee' of size not lesss than 22.50 x 22.5 x 0.5 mm Angle of size 22.5 x 22.5 x 0.5 mm & FI as per std engineering practices with 'E' board ceiling boards 4 mm thick in grid of 605 x 605 mm including cutting holes and making good holes for main joist, suspending with 6 mm dia GI wire to roof trusses, purling & rafters etc all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender