Tender For Special Repairs To Bldg No T-861,T-872,T-873,T-874,T-875,P-226 At Otm-Ii And Bldg No P-566,P-567,P-568,P-569,P-583,P-584,P-643,P-645,P-631 Against (Job No.81Sa/Btd/Sr (Bldg)-20/2025-26, Job No.81Sa/Btd/Sr (Bldg)-23/2025-26 Under Ge (S) Btd Mil
Tender Value
1.36 Crore
Estimated cost
Bid Submission
25 Aug 2026
13 days left
EMD
2.11 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No T-861,T-872,T-873,T-874,T-875,P-226 At Otm-Ii And Bldg No P-566,P-567,P-568,P-569,P-583,P-584,P-643,P-645,P-631 Against (Job No.81Sa/Btd/Sr (Bldg)-20/2025-26, Job No.81Sa/Btd/Sr (Bldg)-23/2025-26 Under Ge (S) Btd Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 3 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and as directed by Engineer-in- charge. |
| 4 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm thick , size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt, Supply & Fixing of 02 Nos (per door) SS 300mm long Sliding Bolt with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long handle complete all specified and directed by Engineer -in-charge. |
| 5 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid decorative type flush door shutter of 30 mm thick , size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt, Supply & Fixing of 02 Nos (per door) SS 300mm long Sliding Bolt with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long handle complete all specified and directed by Engineer -in-charge. |
| 6 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with double rebate of Size 65mm x 125 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and as directed by Engineer-in- charge. |
| 7 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with double rebate of Size 65mm x 100 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and as directed by Engineer-in- charge. |
| 8 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 35 mm thick , size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt, Supply & Fixing of 02 Nos (per door) SS 300mm long Sliding Bolt with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long handle complete all specified and directed by Engineer -in-charge. |
| 9 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) glazed and skeleton shutters of 35mm size open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt, Supply & Fixing of 02 Nos (per door) SS 300mm long Sliding Bolt with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long handle complete all specified and directed by Engineer -in-charge. |
| 10 | Supply and fixing factory made uPVC white colour casement (Openable) window (Area exceeding 1.00 sqm but not exceeding 2.00 sqm each) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 11 | Material and labour Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories and 5mm thick glazig with selected quality galss. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 12 | Material and labour Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes costof glass and includes all other connected accessoriesNet opening will be measured for payment purpose.) |
| 13 | Material and labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate in filling back of Pressed steel frames chowkats/frame and in bed blocks to hold fast complete all as specified and directed by EIC |
| 14 | Material and Labour Pressed steel shutter for cupboard with sheet thickness not less than 1.2 mm made to shape with and including locking arrangement, handles, hinges and one shop coat painting complete all as specified and as shown on drawing.Note : Referred drg is applicable for shutter and frame only. |
| 15 | Supply and fixing for steel rolling shutters with ball bearing, as specified including top cover and 1.25 MM thick lathanchoring rod hasp and staple and gear operated type with bevel gear box and crank handle , lock, hold fast, complete all as specified in SSR Part-I (2009) para 10.23 including PCC block, erected in position as directed including one shop coats of primer both sides on exposed surfaces including taking out old defected/rusted shutter and making good the disturbed wall surfaces (brick, plastering and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Supply and fixing lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed |
| 17 | Supply & Fixing Galvanised MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks to Galvanised MS wire staple complete all as specified and as directed by Engineer-in-charge. |
| 18 | Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks to stainless steel wire staple complete all as specified and as directed by Engineer-in-charge. |
| 19 | Supply & fixing repairs 300mm mild steel ordinary rat tail rod springs (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and as directed by Engineer-in- charge. |
| 20 | Supply & fixing for 5 mm thick, sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge. |
| 21 | Supply & fixing for 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge. |
| 22 | Supply & fixing 5.0 mm thick Figured glass pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed |
| 23 | Material and labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .Note :- (i) Weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.(ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles, aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly.(iv) During the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill . |
| 24 | Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, 03 Nos hinges in each leaf, one aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet or one mortice lock in each door, aluminium snap beading, screw, including taking down of old shutter of any description and any size complete all as specified. |
| 25 | Supply & fixing in repair Door closer hydraulically regulated,aluminium (die cast) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in- charge. |
| 26 | Supply and fixing in repair Mortice lock 4 levers , vertical type, size 100 mm alumunium , etc complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material & Labour 18/19mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-charge. |
| 28 | Supply & fixing 5.00 mm thick, tinted glass, pin head type not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge. |
| 29 | Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified ad directed. |
| 30 | Supply and fixing, Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50 mm thick of any colour having tensile strngth of 550 MPA as in roof covering, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed. |
| 31 | Supply and fixing, Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50 mm thick of any colour having tensile strngth of 550 MPA as in roof covering, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed. |
| 32 | Supply and Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 33 | Supply and fixing mild steel works as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 34 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed |
| 35 | Supply and fixing rolled mild steel work in joist, channel, angle, tubular section or tee section fixed independently without connecting plates etc, (cut to ordinary length ie. Within 20mm of the length indicated), tubular trusses and similar work conforming to Fe 290 (Gde E-165) complete |
| 36 | Material & Labour for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft / Loose soil complete all as specified and directed by Engineer-in- Charge. |
| 37 | Material and labour for PCC 1:3:6 , Type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge. |
| 38 | Dismantling Wall and Ceilling Board (fibre, pulp, Insulation,etc) or Insulation boards/slabs/ blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in- Charge. |
| 39 | Material and labour Anodised aluminium snap grid (Size of grid 605 x 605 mm) frame work for false ceiling including hangers 6mm dia G.I (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified |
| 40 | Material and labour for 4mm thick non asbestos fibre cement building boarding boarding fixed or laid/inserted to timber/GI/aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and as directed by Engineer-in- Charge. |
| 41 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 42 | Material and labour for 100mm thick cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in flooring and paving etc complete all as specified and as directed by Engineer-in- Charge. |
| 43 | Material and Labour for 75 mm thick PCC 1:3:6 , Type C-2 using 40 mm graded stone aggregate as in plinth protection, finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge. |
| 44 | Supply and fixing 90 mm wide 1.5 mm thick Aluminium dividing strips, inserted in position, conform to design in floors all as directed |
| 45 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge. |
| 46 | Material and labour for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 47 | Material and Labour for Cement Concrete 1 : 2 : 4 Type B-1 , using 20 mm graded stone aggregates as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles andthroating,complete all as specified and as directed by Engineer-in- charge. |
| 48 | Material and labour Brickwork with sub class 'B' old size burnt clay bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises etc. complete all as specified and directed by Engineer-in-charge. |
| 50 | Material and labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mm x 300mm x 7mm / 600mm x 300mm x 7mm thick set jointed in neat cement slurry / paste and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified. |
| 51 | Material and labour for Glazed ceramic coloured tiles of size 600mmX 300mm, 7mm thick, as in vertical surface such as skirting / Dado set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 52 | M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick screed in CM 1:4 complete all as specified and directed. |
| 53 | M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed in CM 1:6 complete all as specified and directed. |
| 54 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-charge. |
| 55 | Material and labour for Vitrified coloured ceramic tiles, light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed |
| 56 | Material and Labour for Virified Ceramic tiles dark shade 8-9 mm thick double charged/ ultra charged (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including necessary cutting as per site requirement etc complete all as specified and as directed by Engineer-in-charge. |
| 57 | All as per item above but as in skirting including 10mm thick backing coat in CM 1:4 complete all as specified and directed |
| 58 | Material and labour 20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , with and including screed bed 10mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Material and Labour for Cutting holes in brick walls built in cement mortar exceeding half brick but not exceeding one brick for inserting hold fast and making good dismantled portion in CM 1:3 or Cement concrete 1 : 2 : 4 , type B1 as required, Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as specified and as directed by Engineer-in- charge. |
| 60 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-charge. |
| 61 | Material and labour for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 62 | Material and labour for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 63 | Material and labour for rendering 10 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 64 | Material and labour for preparing newly plastered or concrete surface of wall and applying three coats of white wash complete all as specified & directed by Engineer-in- charge. |
| 65 | Material and labour for preparing newly plastered or concrete surface of ceiling and applying three coats of white wash complete all as specified & directed by Engineer-in- charge. |
| 66 | Material and Labour for preparing old plastered or unplastered wall surface on ceiling and applying two coats of white wash on wall complete all as specified and as directed by Engineer-in-charge. |
| 67 | Material and Labour for preparing old plastered or unplastered surface of ceiling and applying two coats of white wash on ceiling complete all as specified and as directed by Engineer-in-charge. |
| 68 | Material and labour for preparation of new plastered internal wall suraface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including priming coat of interior primer and two coats of distempering with is quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr of approved manufacture of reuquired shade and colour complete as per manufacture specification |
| 69 | Material and labour for complete removal of existing treatment on old plastered internal wall suraface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including priming coat of interior primer and two coats of distempering with is quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr of approved manufacture of reuquired shade and colour complete as per manufacture specification |
| 70 | Material and labour for preparation fo new palstered wall ssuraface and finshing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @2.20 kg / 10Sqm complete all as specified and as directed |
| 71 | Material and labour for complete removal of existing treatment on old palstered wall ssuraface and finshing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @2.20 kg / 10Sqm complete all as specified and as directed |
| 72 | Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coasts of synthetic enamel paint (for steel surface)complete all as specified |
| 73 | Material and labour for preparation of old steel surfaces of any description over 10cm in width or girth and applying two coasts of synthetic enamel paint (for steel surface)complete all as specified |
| 74 | Material and Labour for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, conforming to Fe.290.Gde-E-165 etc for cooler stands, door angle frame and brackets etc. including two coats of syntehtic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and as directed by Engineer-in- charge.Note :- (i) Weight of steel sections shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of steel sections .(ii) During the weighing of steel sections the weight of two coats of syntehtic enamel paint over a coat of red oxide zinc chromate primer shall not be considered for weight but the rate of material and labour for providing two coats of syntehtic enamel paint over a coat of red oxide zinc chromate primer is included in this item and nothing shall be paid extra on this account.(iii) The board shall be duly countersigned by GE shall enclosed with Final Bill |
| 75 | Dismantling water tanks of capacity exceeding 500 ltr but not exceeding 1000 ltr each and removing to store complete all as specified and as directed by Engineer-in-charge. |
| 76 | Supply and fixing in replacement three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed by Engineer-in-charge. |
| 77 | Supply and Fixing in repair Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge. |
| 78 | Supply and fix in repair gun metal gate valve of 20 mm dia bore size (IS -778) Class 1 with iron wheel head, screwed inside, non-rising stem, complete all as specified and directed. |
| 79 | Supply and fix gun metal gate valve of 15 mm dia bore size (IS -778) Class 1 with iron wheel head, screwed inside, non-rising stem, complete all as specified and directed. |
| 80 | Taking up or down galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge. |
| 81 | Supply and Fixing 16 mm bore CPVC pipe SDR 11 with and including CPVC SDR 11 fittings and fixed to walls & ceilings or laid in floors, complete complete all as specified and as directed by Engineer-in-charge |
| 82 | Taking up or down galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge. |
| 83 | Supply and Fixing 20 mm bore CPVC pipe SDR 11 with and including CPVC SDR 11 fittings and fixed to walls & ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge |
| 84 | Taking down rain water pipe and even gutters any size and pattern including all fittings including removal from site complete all as specified and directed. |
| 85 | Supply and Fixing 110 mm bore of pipe PVC (SWR) type B pipes single socket 6 Kg/Sq cm in any length with Stack clamps made out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge. including Taking down old AC eaves gutters and rainwater pipes ( of any size and pattern), including all fittings, compete all as specified and as directed by Engineer - in-charge. |
| 86 | Supply and fixing 110 mm bore of PVC (SWR) type-B bends of any radius, shoe, elbow, Y joints, floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20mm stone aggregates fixed to PVC pipes complete all as specified and as directed by Engineer-in-charge |
| 87 | Material and Labour in repair vitreous china wash down water closet pan wall hanging single piece (with and including flushing cistern EWC) 'P' trap, with and including white coloured closed pattern plastic seat cover, hand faucet , with and including mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge. |
| 88 | Supply & fixing in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge. |
| 89 | Supply and Fixing in repairs vitreous china valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including suitable for wall hung EWC complete all as specified and as directed by Engineer-in- charge. |
| 90 | Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply and Fixing wash hand basin of size 550mm x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete complete all as specified and as directed by Engineer-in-charge. |
| 92 | Supply & Fixing 15mm bore chromium plated quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and as directed by Engineer-in-charge. |
| 93 | Supply and fixing 15mm bore Stop valves, fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. |
| 94 | Supply and fixing in repair bib taps cost copper alloy with crutch or butterfly handle , screwed down , chromium plated screwed for iron pipe or brass ferrul for 15MM bore dia pipe complete all as specified and director. |
| 95 | Supply & fixing Hand shower (health faucet) ABS body mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long 8mm dia flexible tube and including wall hook for 15mm bore pipe complete all as specified and as directed by Engineer-in-charge. |
| 96 | Supply and Fixing Brass chromium plated bottle traps for wash basins with inlet and outlet including necessary packing, union and cap and fixed complete all as specified and as directed by Engineer-in-charge. |
| 97 | Supply & fixing in repairs chromium plated shower rose 70mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge. |
| 98 | Supply and fixing in repairs 15mm bore chromium plated quarter turn concealed stop valve of cast copper alloy fancy type with long shark & cup etc complete all as specified and as directed by Engineer-in- charge |
| 99 | Supply & fixing 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified and as directed by Engineer-in-charge. |
| 100 | Supply and fixing in repair water jet for EWC chromium plated with PVC connection complete all as specified and as directed by Engineer-in- charge |
| 101 | Supply & fixing in repair brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 102 | Supply & fixing Chromium Plated, soap tray size not less than 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge |
| 103 | Supply & fixing 125mm dia grating with/without waste hole of PTMT including circular cutting on tiles etc. complete |
| 104 | Supply and fixing 600mm x 450mm size bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wodden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 105 | Supply and fixing shelf/corner shelf of PTMT with and including chromium plated brass screw and wooden/plastic cleats(minium weight 300gms) complete all as specified and directed |
| 106 | Supply and fixing stainless steel curtain rod 25mm dia, wall thickness of pipe not less than 16 guage and grade SS 304, including brackets and pair of decorated end knobs (finials), stop roller etc. as per site requirement, fixed to wall with fixing accessories, including taking down old existing curtain rods any type or condition complete all as specified and as directed by Engineer-in-Charge. |
| 107 | Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe set in cement mortar up to and including 150 mm bore pipes all as specified and directed by Engineer-in-Charge. |
| 108 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in- charge. |
| 109 | Returning and filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed by Engineer-in-charge. |
| 110 | Removing excavated material (Soils ) not exceeding 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge. |
| 111 | Supply and laying DWCPE (SN 8) drain pipes 150 mm nominal dia as per IS-16098 (Part-II), laid in trenches on bed including all accessories/ fittings/ jointed ring, jointing and testing complete all as specified and as directed by Engineer-in- charge.Note:- Excavation , earth work, bedding and pedestal / anchorage if required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A' |
| 112 | Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of SGSW drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm. |
| 113 | Material and Labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe in 150 mm complete all as specified and as directed by Engineer-in-charge. |
| 114 | Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed. |
| 115 | Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed. |
| 116 | Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50mm x 5mm and 16mm dia round iron stay (at the interval of 1.00mtr ) including nut bolt and PCC work, complete all as specified and as directed by Engineer-in- charge. |
| 117 | Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50mm x 5mm and 16mm dia round iron stay (at the interval of 1.00mtr ) including nut bolt and PCC work, complete all as specified and as directed by Engineer-in- charge. |
| 118 | Supply and Fixing 110mm bore,PVC SWR Type-B, junction , TEE and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete complete all as specified and as directed by Engineer-in-charge. |
| 119 | Supply and Fixing 110mm bore,PVC SWR Type-B, junction , TEE and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete complete all as specified and as directed by Engineer-in-charge. |
| 120 | Supply & fixing 100 mm bore of long neck, PVC (SWR) fittings Type -B 'P' Trap , with grating including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer - in-charge. |
| 121 | Supply & fixing 75 mm bore of long neck, PVC (SWR) fittings floor trap , with grating including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer - in-charge. |
| 122 | Supply & Fixing Branch pieces, PVC SWR Type B single 110 mm bore, equal or unqual, (Y, T, etc) complete all as specified and as directed by Engineer-in-charge. |
| 123 | Supply and fixing 75mm bore Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed by Engineer-in-charge. |
| 124 | Demolition of RCC of any description and any position not otherwise specially provided and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance not exceeding 500 metres away from the site complete all as specified and as directed by Engineer-in-Charge..Note:The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. |
| 125 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate complete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. |
| 126 | Material and Labour for pre-cast Cement Concrete (1:2:4) Type- B-1 , using 20mm graded stone aggregate as in manhole cover, placed in position, set in CM (1:6) complete all as specified & directed. Note- Reinforcement shall be measured and paid seperately. |
| 127 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 128 | Supply & fixing Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engineer-in-charge. |
| 129 | Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete complete all as specified & directed by Engineer-in-charge. |
| 130 | Material and labour for ATT of soil under existing floors using emulsion @ one liter per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all sepecified and directed by engineer-in-charge. |
| 131 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, complete all as specified and directed by Engineer-in- charge. |
| 132 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance not exceedomg 500.00mtr where directed ) complete all as specified and directed by Engineer-in- charge. |
| 133 | Material and labour for repair of surface with GP-2 (General Purpose Grout) or repair with PCC mortar up to required thickness for levelling of surface in required slope as per site condition/ manufacturers instruction and including cracks shall be repaired with cement admixed with polymer as per manufacturers instructions complete all as specified and directed by Engineer-in- charge. |
| 134 | Material and labour for cleaning the surface of loose dust, and dirt and cement slurry etc by means of wire brush , dust removing brush etc. after preparation of surface treated with PU epoxy primer to seal the pores and enhance the adhesive of the coating,after primer applying single component waterproffing liquid membrance based on pure, polyurethane resin cold applied with spray, applied PU Membrane shall be UV resistant with SRI (Sun Reflective Index) of 98 with an elongation of 650% +50 and tensile strenghth not less than 2Mpa. No leakage up to five bars of water pressure. Shore hardness >70 shall be 2.00mm (overall) DFT (Dry Film Thickness), in two or more layers (each layer minimum 750 micron) or as per manufacturers instructions so as to achieve thickness not less than 2.00mm DFT complete all as specified and as directed.Note:- (i) Payment will be made after providing warranty certificate for 10 years from the Company.(ii) The thickness of the PU membrane shall be checked with cut and seal method and the third-party test to be carried out from NABL approved Lab. The sample size for size for check should be 50 x 50mm randomly at any location and kept in record. |
| 135 | Material and Labour for 40mm average thick PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair using Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ. |
| 136 | Material and labour for cement slurry @ 1.2 kg /sqm spreading with bristle brush and rendering 15 mm (average thickness) in cement mortar 1:3 finished even and fair mixing with Liquid water proof compound 200ml per 50 kg cement bag on roof surface complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid water proof compound shall be measured and paid separately. |
| 137 | Supply only liquid water proofing compound complete all as specified and directed by Engineer-in- charge. |
| 138 | Supply & fixing factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with and including one shop coat of zinc chromate primer with glazing bars including making good as per existing surfaces complete all as specified & as directed by Engineer-in- charge.Note: The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account. |
| 139 | Material and Labour Forming jambs, etc. to openings , including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in Cement Mortar 1:4 , complete all as specified and directed. |
| 140 | Material and Labour for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-charge. |
| 141 | Material and labour 25mm thick cement concrete type B-1, 1:2:4 (12.5 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed by Engineer-in-Charge. |
| 142 | Material and labour for machine cut kota stone slab flooring 20-25 mm thick laid over with and including 20mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. |
| 143 | Material and Labour for 20-25 mm thick Kota stone slab as approved by GE in riser of steps, stairs, skirting,dado etc. over with and including rendering 20 mm hick in cement mortar 1:6, laid and jointed with grey cement slurry @ 3.00 Kg/ Sqm mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed by Engineer-in- charge. |
| 144 | Material and Labour for preparation of new surfaces by mechanized sander having suction vacuum bag using smart periodical methodology complete all as specified and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and wall care putty (2mm thick) in two layers ( each layer 1mm thick ) complete all as specified and directed.Note : Before applying painting (Interior Acrylylic emulsion & Exterior emulsion) in bldgs a sample patch of size 1 mtr x 1 mtr to be done for approval of GE. Painting should be done by using painting roller, mechanically method and as per manufacturer's instructions cost for the same for scaffolding for plastering & painting etc is included in the rates quoted by the contractor. |
| 145 | Preparation of new plastered Internal wall surface complete all as specified complete all as specified and applying the following:-(a) Material and Labour wall care putty (1.5mm thick) in two layers (each layer 1mm thick ) on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified.(b) Material and Labour two coat of acrylic emulsion paint over a coat of chalk whitening priming by using Airless spray/Roller complete all as specified.Note:- 1.Contractor may use manual scraping tools for complete removal and surface preparation with prior approval of Engr-in-Charge in case of using of Mechanical equipment are not possible.2. Before applying painting (Interior Acrylylic emulsion & Exterior emulsion) in bldgs a sample patch of size 1 mtr x 1 mtr to be done for approval of GE. Painting should be done by using painting roller, mechanically method and as per manufacturer's instructions cost for the same for scaffolding for plastering & painting etc is included in the rates quoted by the contractor. |
| 146 | Complete removal of existing treatment on Old Internal ceiling surfaces of any description, preparation of surface by Mechanised sander having suction vacuum Bag using Smart periodical methodology, complete all as specified and applying the following :-(a) Materal & Labour for wall care putty a coat of 1.0 mm thick layer on wall surface and smoothening the surface with sand papers / Mechanised sanding etc preparatory to paint as directed complete all as specified.(b) Material & Labour for two coat of acrylic emulsion paint @ 12Sqm/ltr/two coat of approved tint over a coat of primer @ One ltr per 10 Sqm Sqm per one coat on old prepared surface by using Airless spray/Roller complete all as as specified.(Note:- Contractor may use manual scraping tools for complete removal and surface preparation with prior approval of Engineer-in-Charge in case of using of Mechanised equipment are not possible |
| 147 | Material and Labour for 75 mm thick PCC 1:3:6 , Type C-2 using 40 mm graded stone aggregate as in plinth protection, finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge. |
| 148 | Material and labour for RCC 1:2:4, Type-B-1, using 20 mm graded stone aggregates (Nominal Mix) as in chajjas complete all as specified and as directed by Engineer-in-charge. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. |
| 149 | Material and labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge. |
| 150 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises etc. complete all as specified and directed by Engineer-in-charge. |
| 151 | Supply and fixing vitreous chinaware counter top wash basin, white, flat back, size 550x400 mm excluding ditto but including brackets (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by Engineer-in-charge. |
| 152 | Supply and Fixing 15mm bore, brass Chromium Plated wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in- charge. |
| 153 | Supply and Fixing PVC connection 15mm dia and 60cm long with two nos of brass check nuts and washers complete all as specified and directed |
| 154 | Supply and fixing stainless steel, Chromium plated, decorative type, soap dish holder of approximate size 160mm x 160mm x 90 mm fixed to wall with rubber plugs complete all as specified and as directed by Engineer-in-Charge. |
| 155 | Supply and fixing Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-Charge. |
| 156 | Supply and fixing toilet paper holder of chromium plated with falt recessed type stainless steel\\"fixid to walls with chromium plated(cp) brass screw complete all as specified and directed |
| 157 | Material and labour for 110mm bore CPVC floor trap/nahani trap, with grating including jointing to waste pipe fixed in cement concerete type B-1(1:2:4) complete all as specified and as directed by the engineer-in-charge |
| 158 | Supply and fixing 110mm bore uPVC pipes grade'b' , single socketed in any length with rubber ring joints, fixed along walls and trenches with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall) of suitable size fixed with fasteners/nut bolts, joint fixed with pipe joint lubricant including UPVC bent/tees of any radious for 100mm bore with access door,100mm junction (double t/socket equal or unequal, UPVC 100 mm bore vent cowls,reducer 110mm to 50mm complete complete all as specified and as directed by engr-in Charge. note: Brackets, clamp,nut bolt,fastner ,slotted channel etc shall be made of deep drawn low carbon steel material with jotbdip zinc alumnium flake coated and fixied all as shown on btd drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.Note:uPVC pipe and fitting/ fixture-(i) The testing for leakage of pipe shall be done before aonnecting the pipes (ii) All pipes shall be minium 4\\" away from walls fixed with GI brackets (iii) The gully trap shall be minium 90cm away from wall (iv) Seprate pipes for for each floor should be provided(v)Sewage and drain system shall bbe seprate. |
| 159 | Supply and fixing 75mm bore uPVC pipes grade'b' , single socketed in any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall) of suitable size fixed with fasteners/nut bolts, joint fixed with pipe joint lubricant including UPVC bent/tees of any radious for 75mm bore with access door,75mm junction (double t/socket equal or unequal,reducer 75mm to 50mm and 75mm bore vent complete complete all as specified and as directed by engr-in Charge. Note: Brackets, clamp,nut bolt,fastner ,slotted channel etc shall be made of deep drawn low carbon steel material with jotbdip zinc alumnium flake coated and fixied all as shown on btd drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account.Note:uPVC pipe and fitting/ fixture-(i) The testing for leakage of pipe shall be done before aonnecting the pipes (ii) All pipes shall be minium 4\\" away from walls fixed with GI brackets (iii) The gully trap shall be minium 90cm away from wall (iv) Seprate pipes for for each floor should be provided(v)Sewage and drain system shall bbe seprate. |
| 160 | Material & Labour for Udaipur Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over with and including 15 mm thick cement screed in cement mortar 1:4 , and roundening to the edge of stone slabs , complete all as specified and directed. |
| 161 | Carefully chipping, removing existing loose / damaged concrete with plaster from Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items by low impact high frequency hammer / chipper without damaging the existing sound concrete and exposing old reinforcement upto 10 mm beyond corroded reinforcement bars using electricity operated diamond concrete saw blade, making the edges straight and even and cleaning it by wire brush and cleaning all existing reinforcement bars then by air blower, making the edges straight and even and cleaning it by wire brush and Cleaning all exiting reinforcement bars then by air blower, applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs, Providing and application of Zinc rich epoxy anti-corrosive protective coating for reiforcment bars as corrosion protection system in 2 coats to the entire circumference surface of bars, Apply SPR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar, Rebuilding the section of structural damaged RCC/PCC repair to spalling concrete to its original size and shape in layers on 10 mm average thickness in 1st layer then subsequent layers as per requirement by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength >= 50 N/sqmm (28 days) according to ASTM C 109; flexural strength >=5N/ sqmm (7 days) according to ASTM C 293-79 complete all as specified and as directed by Engineer-in-charge, Make : Sika- Monotop 122 F/R Forsoc - Renderoc S2/Pidilite Dr Fixit Polymer Mortar HB or equivalent make approved by Engineer-in-charge complete all as specified and as directed by Engineer-in-charge |
| 162 | Rebuilding the section of structural damaged additional in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one componenet fiber based repair motar having compressive strength>= 50n/sqmm(28 days) according to ASTM c 109;flextural strength>=5n/sqmm(7 days)according to astm c 293-79 complete all as specified and as directed by Engineer-in-charge.Make:Sika - Monotop 122f/r fosroc - renderoc s2/Pidlite Dr fixit polymer mortar HB or equivalent make approved by E-in-C br |
| 163 | Demolition of cement concrete of any description & in any position not otherwise specifically provided for ,complete all as specified and directed. |
| 164 | Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:-(a) Cleaning of RCC surface to remove dust,loose particles etc with compressed air or any other suitable techniques depending on site conditions grinding any sharp edges etc complete all as specified and as directed by engr-in-charge(b)Supply and apply a glass fibre reinforces modified cementitous coating system (i) Base Coat: HS Latex plus (consuption base coat 0.30kg/sqm)Reinforcement : Glass Fibre (iii) Second and Third Coat : HS Latex Shield 2K (consumption Qty 3 Kg/Sqm)System Requirement : Density 2.00 kg/ltr abd compressive Strength : 0.5 N/mm2(c) Material and labour rendering 15mm thick in cmeent plaster (1:4) using coarse sand mixed admixed with integral water proofing compound as manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces.(d) 40 mm dia HDPE pipe to be provided as spout pipe in sunken portionNote:-Sunken portion will be fill only with AAC blocks sludge as per manufacturers instructions.Note : HS Power Plasticizer (Consumption : 0.10 kg per Bag of Cement)Make : Berger/FOROC/SIKA/BASF/NORMET/PIDILITE |
| 165 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 166 | Material and Labour for hard core of broken stone or boulders of gauge exceeding 63mm,deposited, spread, and levelled in layers not exceeding 15cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 167 | Material and Labour PCC (1:4:8) type D2 using 40mm graded stone aggregate infoot path/walk way surface finfished even &fair without using extracement complete all as specified and directed. |
| 168 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m-35 grade with approved colour ,design &pattern as in footparth ,parks, lawns drive ways or light traffic parking etc.,of required strength ,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibratoe ,filling th ejoints with sand and cutting of paver blocks as per required size and pattern, finfishing and swepping extra sand |
| 169 | Material and labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge. |
| 170 | Material and labour for prepration on new surface two coats of synthetic enamal paint over coat of primer on brick ,stone,concrete,surface of any description over 10cm grith or width, not otherwise described |
| 171 | Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge. Note:1.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item no. 172.00,173.00,174.00,175.00,176.00 & 177.00 of BoQ. |
| 172 | Material and labour point wiring for one light / fan point controlled by 6 amps one way modular switch switch with 2.5 Sqmm PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 25 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed by Engineer-in-charge. (Note:- Switches, sockets etc shall be measured and paid for separately under items of Schedule). |
| 173 | All as per srl item item no.172.00(here-in-before) but one 3 pin socket outlet 6amp on same board point, complete all as specified and directed. |
| 174 | All as per srl item item no.172.00(here-in-before) but one 3 pin socket outlet 6amp on the independent board point, complete all as specified and directed. |
| 175 | All as per srl item item no.172.00(here-in-before) but one bell point controlled by one bell push with PVC FR-LSH cable size 1.5 sqmm in independent board complete all as specified and directed. |
| 176 | All as per srl item item no.172.00(here-in-before) but one light point controlled by two way switch with PVC FR-LSH cable size 1.5 sqmm complete all as specified and directed. |
| 177 | All as per srl item item no.172.00(here-in-before) but for 15/16 power point using 4.0 sqmm PVC insulated unsheated copper conducter able fr-lsh multi strand on independent board including provn of 4.0 sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed |
| 178 | Supply and fixing Modular Switch one way 6A/10A 1 module single pole complete all as specified and directed. |
| 179 | Supply and fixing Modular Switch one way 16A 1 module single pole complete all as specified and directed. |
| 180 | Supply and fixing Modular socket outlet 6A-2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified, |
| 181 | Supply and fixing Modular socket outlet 6A/16A-2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified, |
| 182 | Supply and fixing Modular bell push 1way 6A 1 module single pole complete all as specified and directed. |
| 183 | Supply and fixing of repairs Modular switch 2 way 6A,1 module single pole complete all as specified and directed. |
| 184 | Supply and fixing of Modular Fan step regulator, 120w-2 module with 5 steps types complete all as directed. |
| 185 | Supply and fixing ceiling rose surface bake lite with 3 terminlas complete all as specified and directed |
| 186 | Supply and fixing repairs of buzzer, ding dong type 230 Volt complete all as specified and directed |
| 187 | Supply and Fixing lamp holder PVC/ polycarbonate type with back inc LED bulb 9 watt complete all as specified and directed |
| 188 | Supply and Fixing in replacement of decorative wall light fixture made of polycarbonate suitable for retrofit 9W LED Lamp (base B-22) complete with PC diffusor & including one 9W LED lamp (base B-22), 6500K, not less than 100 lumen/watt efficacy ,complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge. |
| 189 | Supply and fixing in replacement Single Pole and Neutral enclosure with a two pin and earth plug and socket complete with and including one MCB single pole of capacity 20 Amps,'C' curve,10KA , 240 volts complete all as specified and directed by Engineer-in-Charge.Note: The rate of one MCB single pole of capacity 20 Amps,'C' curve, 10KA, 240 volts is included in this item and nothing shall be paid extra on this account. |
| 190 | Supply and fixing in replacement LED tube light fittings 4 feet with fixture 20 watts 230v 50HZ incl connecting up with PVC two core copper conductor cable of suitable from ceiling rose to fittings complete all as specified and directed. Note: The rate of PVC two core copper conductor cable from of suitable size ceiling rose to exhaust fan for connection is included in this item and nothing shall be paid extra on this account. |
| 191 | Supply & Fixing LED light fitting Decorative mirror type 2 ft long, 10 watt 230V, AC , with high out put diffuser with drive holder and with and including tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to light fitting complete all as specified and as directed by Engineer-in- charge. |
| 192 | Supply and fixing Building Security light LED Type of capacity 35W/36W comprising with pressure die cast aluminum housing IP 66 protection with all accessories internally prewired complete all as per manufacturer's instructions with and including bracket made of 40mm dia GI Light grade pipe of 1.20mtr long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted with aluminum paint and including connection up with twin core twisted copper conductor cable of suitable size with complete all as specified and as directed by engineer-in-charge. |
| 193 | Supply & Fixing Ceiling fan 5star rated ISI marked 1200mm sweep complete with blades, down rods, including electronic regulator (modular type, 120w, 2 module) and accessories, 230 Volts, single phase, 50 Hz, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current (BLDC) motor connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of suitable size from ceiling rose / connector, including extra GI / MS pipe down rod, as per site requirement , with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete complete all as specified and as directed by Engineer-in-charge. |
| 194 | Supply and fixing ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including cutting of wall and making of proper hole sufficient to fix the fan complete all as specified and directed. |
| 195 | Supply and fixing in replacement sheet metal enclouser DB (made out of CRCA sheet not less than 1.2mm thick) SPN, 12 Way 230V AC, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 & IK09 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including making good disturbed surfaces of walls as necessaty, complete all as specified and directed by Engineer-in-charge.Note: MCB & MCCB shall be measured and paid seperately in respective items of Schedule'A' BoQ |
| 196 | Supply and fixing in replacement sheet metal enclouser DB (made out of CRCA sheet not less than 1.2mm thick) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 & IK09 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including making good disturbed surfaces of walls as necessaty, complete all as specified and directed by Engineer-in-charge.Note: MCB & MCCB shall be measured and paid seperately in respective items of Schedule'A' BoQ. |
| 197 | Supply and Fixing Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-54 protection, flush mounted for metal door, powder coated DB V TPN 4 way, 415 V AC with 200 Amps rated bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCB SP/TP and earth & neutral bus bar etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ. |
| 198 | Supply and fixing in replacement of SP MCB 6-32 Amp,240 Volt 10KA 'C' series complete all as specified and directed |
| 199 | Supply and fixing in replacement of SPN MCB 40-63 Amp,240 Volt 10KA 'C' series complete all as specified and directed |
| 200 | Supply and foxing in replacement of MCCB 100 Amp, 4pole ,415 Volt ,ISI Marked,Short circuit breaking capacity not less than 25KA ,thermal maganetic trip, setting 80-100%,Icu-100% Ics confirming to IEC-947, IS-13947, thinbles, nuts bolts, washers etc complete all as specified and directed by engineer-in-charge |
| 201 | Taking down old complete and material and labour sub main wiring with 06 sqmm nominal cross sectional area, two single core, 1100 volt grade, multi-stranded,PVC insulated, unsheathed, frls copper conducter cable with and including continous earth wire of size 06 Sq mm nomial cross sectional area, single core,1100 Volt grade, multi-standed, pvc insulated,unsheathed,FRLS copper conducter cable and connected to common earth dolly with suitable copper lugs and drawing into and including rigid non-metalic PVC conduit of 25mm dia, medium grade complete with and including all PVC conduit accessories connealed into wall by cutting of chaded in wall and making good to the disturbed curface to mathched and finised with exiting surface are included in the ratecomplete all as specified and directed make of cable-polycab/havels/grandlay cablenote: 2 run of 6.0 Sqmm main cable(phase and Neutral), one run of 6.0 Sqmm earth wire and one run length of pvc conduit size 25mm shall be considered as one running length. (ii) The wiring shall be done in proper color coding using Red,Yeloe ,Blue for neutral and Green for earth. |
| 202 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium strandred conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspenstion wire, one twin core cable 10.0 sqmm complete all as specified and directed by engineer-in-charge |
| 203 | Material and Labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. |
| 204 | Supply and fixing socket outlet modular type, multipurpose,2/3 pin,single pole one way ,6amp two module, complete all as specified, |
| 205 | Supply and fixing socket outlet modular type, multipurpose,2/3 pin,single pole one way ,6/16 amp two module, complete all as specified, |
| 206 | Taking down old complete and S & F. MCB TPN 40 TO 100 Amp ,415 Volts, 10KA 'C' series complete all as specified. |
| 207 | Supply and Fixing in reapir LED panel light fitting, recessed mounted, Square shaped of size (595x595x65)mm, 36(± 10 % ) watts efficiency not less than 90 lumen/watt, extrubed aluminium/ polycarbonates, pc diffuser, mosule and inbuilt driver complete including making connection complete all as specified and directed |
| 208 | Supply Laying and testing in of XPLE insulated armoured heavy duty electric cable of the size 35 Sqmm 3.5 core following size,1100 Volts grade, with standard aluminium conducter served with aninner sheathing of PVC tape armoured with GI wire and over all PVC sheathed in laid trenches/passing through pipe/duct/road crossing/surface of wall/in hume pipe etc including fixing hardware,clamps,gland, thimble and making good the damaged surface etc complete all as specified and as directed. |
| 209 | Material and labour for sand cushioning in tranches for cables in including watering and consolidation complete all as specified. |
| 210 | Supply and laying un-reinforced precast concrete cable cover, class LV, type-1, Flat ,size 250mmX150mmX40mm, ISI marked laid flat across the cable length all as per specification and directed by engr-in-charge. |
| 211 | Supply and fixing exhaust fan, PVC body of 300mm sweep, 230Volt, 1200RPM ,Copper winding, complete with 3 NOS of blade set ,louvers and shutter and mounted in suitable opening arrangement in wall/ window and connecting up including 3 core PVC insulated PVC sheathed copper conducter flexible cable 24/0.2 mm from ceiling rose two fan complete including grouting of bolts,nuts etc complete all as specified . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender