Tender For Special Repair To Bldg No P-93 (12 Ors Qrtr) At Old Domlur Md Accn Under Ge (Central) Bangalore.
Tender Value
89.30 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
1.58 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-93 (12 Ors Qrtr) At Old Domlur Md Accn Under Ge (Central) Bangalore.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Aug-2026 | AMDT | Other | 28-Aug-2026 |
| 2 | 22-Aug-2026 | DATE CORRIGENDUM | Date | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., including removal of debris outside the MoD land complete all as specified and as directed. |
| 2 | M&L for Rendering 5mm thick cement mortar (1:3) on fair faces of ceiling concrete surface finished even and smooth without using extra cement complete all as specified & as directed. |
| 3 | M&L for Rendering 15 mm thick cement mortar (1:6) on stone masonry surface of walls finished even and smooth without using extra cement complete all as specified & as directed. |
| 4 | M&L for Rendering 15 mm thick cement mortar (1:4) on stone or brick masonry surface of walls finished even and smooth without using extra cement complete all as specified & as directed. |
| 5 | M&L for Cutting/chipping the spalling concrete surfaces of columns, beams, facias, slabs, Chajjas & cantilevers etc., and trimming cleaning the surfaces of any thickness & finish with following specification all as specified and directed :-(i) one coat of notozinc primer to the exposed reinforcement.(ii) All prepared concrete substrates shall be primed using NITOBOND EP or equivalent chemical.(iii) Apply the mix RENDEROC RG (apoxy treatment) or equivalent chemical withcoarse aggregate in 1:0.75 ratio for bonding old demolished concrete surfaces all as per manufacturer instructions.(iv) Applying Plaster average 20mm thick cement mortar (1:4) finishied even and smooth without using extra cement to level the surface etc. |
| 6 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris outside MoD land complete all as specified & as directed. |
| 7 | Demolition of Plain cement concrete (unreinforced) in ground floor and paving etc n.exc 15cm thick above or below ground level including terrazzo finish wherever existing complete all as specified and directed. |
| 8 | Demolition of stone slabs of any description or thickness in floors laid bedded and pointed in any mortar etc., including removal of debris outside MoD land complete all as specified and as directed. |
| 9 | M&L for 25mm thick plain Cement concrete (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate for sub base to floor tiles complete all as specified and as directed. |
| 10 | M & L for Non skid coloured ceramic tiles 7 to 8 mm thick (square /rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 11 | M & L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and as directed. |
| 12 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over & including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 13 | M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick to 8mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat in Cm (1:4) all as specified and as directed. |
| 14 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed. |
| 15 | M&L for 18-20mm thick Sadherhali stone slab flooring, steps, jambs, pillars, window- cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab over & including 15 mm thick screed bed in CM (1:4) and rounding to exposed edges complete all as specified and as directed. |
| 16 | M&L for 18-20mm thick Sadherhali stone slab for skirting, riser, dado and like jointing in cm (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab including backing coat 10 mm thick in CM (1:3) complete all as specified and as directed. |
| 17 | M&L for 20mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in CM (1:6) and Rounding to exposed edges complete all as specified and as directed. |
| 18 | M&L for Anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. |
| 19 | S&F M S ordinary rat tail rod pattern spring 300mm long including roller and roller plate complete all as specified and as directed. |
| 20 | M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in Plinth protection finshed the concrete surface fair and even without using extra cement including joint filling with sealing compound grade A, complete all as specified and as directed. |
| 21 | Demolition of brick work or PCC solid block or stone/boulder masonry built in cement mortar complete all as specified and as directed. |
| 22 | M&L for Precast cement concrete (1:3:6) type C1 using 20mm graded crushed stone aggregate as in solid block masonry exc 10cm width & setting in CM (1:6) complete all as specified and as directed. |
| 23 | M&L for Precast cement concrete (1:3:6) type C1 using 20mm graded stone aggregateas in solid building blocks 10cm thick setting in CM 1:6 complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) area not exc 1.50 Sqm each including making good the disturbed surface complete all as specified and as directed. |
| 25 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) area exc 1.5 Sqm but n. exc 4 Sqm each including making good the disturbed surface complete all as specified and as directed. |
| 26 | M & L for Pressed steel frames of profile size 125 x 60 mm for doors fabricated with 1.25mm thick M S sheets with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed. |
| 27 | M & L for pressed steel frames of profile size 105 x 60 mm for doors fabricated with 1.25mm thick M S sheets one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and as directed. |
| 28 | M & L for PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in filling of chowkats including necessary formwork etc, complete all as specified and as directed. |
| 29 | M & L for Plain, solid, straight second class hard wood frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 30 | M & L for second class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats, complete all as specified and as directed. |
| 31 | M & L for Flush door shutters 40 mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 32 | M & L for Powder coated aluminium sliding window (three way) frame & shutter with two glazed shutters and one wiremesh shutter /skeleton section with the following specifications complete all as specified and as directed :-(i) Aluminium frame section 116x36.50x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick.(iii) Aluminium grill mesh size 50mmx50mm and 5mm thick bars fixed in frame complete.(iv) Hold fast fixed in walls with PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate including making good distributed surfaces to match with adjoining surfaces (v) 4mm thick sheet glass ordinary quality and fixed with rubber gasket for glazed shutter etc.(vi) Stainless steel wire mesh 0.36mm nominal dia avg width of aperature 1.14mm and fixed with rubber gasket for gauzed shutter etc.(vii) Aluminium disc /bow hanle and locking system. |
| 33 | S&F for Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following specifications complete all as specified and as directed :-(i) Aluminium frame section 45x25x1.80mm.(ii) Hold fast in walls fixed with PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate including making good distributed surfaces to match with adjoining surfaces (v) Frosted glass 4mm thick ordinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for with glazed shutter etc. |
| 34 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & as directed.(Note: Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account to tenderer) |
| 35 | S&F Factory Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified & as directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). |
| 36 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 37 | S&F 19mm thick Medium Density Fibre Board both side finished as in wardrobe, compartments & Drawers etc complete all as specified and as directed . |
| 38 | Supply & fixing only stailess steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples with wodden beading on wooden shutter or with screws to steel / aluminium shutter all as specified and as directed . |
| 39 | M & L for Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate exceeding half brick but not exceeding one brick all as specified and as directed. |
| 40 | S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe, guard bars etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 41 | S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised, Width of flaps 40mm (when open) complete all as specified and as directed. |
| 42 | S&F Butt hinges 100mm long 2.5mm thick stainless steel 202 grade, complete all as specified and as directed. |
| 43 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 44 | S&F 125 mm long aluminium anodized handles of extruded section complete all as specified and as directed. |
| 45 | S&F 150mm long aluminium handles, cast type anodized complete all as specified and as directed. |
| 46 | S&F 300mm long aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 47 | S&F 100mm size Hasp & staple aluminium anodised, safety type, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 48 | S&F 15mm dia Magic Eye, stainless steel complete all as specified and as directed. |
| 49 | S&F in Repair 20mm dia Stainless steel Curtain Rod, 202 grade , wall thickness 1.5mm of approved quality complete all as specified and as directed. |
| 50 | S&F in repair Stainless steel brackets suitable for decorative type curtain rod 20mm dia Stainless steel complete all as specified and as directed. |
| 51 | S&F 20mm outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors including taking down 15 mm dia GI pipe complete all as specified and as directed. |
| 52 | S&F 25mm outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors including taking down 20 mm dia GI pipe complete all as specified and as directed. |
| 53 | S&F in repairs Stainless Steel (conforming to AISI -304 grade) Kitchen Sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 355mm x 165mm depth made of 1mm thick stainless steel sheet with & including brass chromium plated waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe (heavy duty ) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified & as directed. |
| 54 | S&F in Repair Sink Cock brass chromium plated, Wall Mounted with flange fixed to 15 mm dia bore pipe complete all as specified and as directed.(Make : Prayag cat No 8316 or equivalent make specified in P S herein after as approved by GE) |
| 55 | S&F in repairs Stainless steel plate rack of overall size 900mm x 900mm x 250mm made with S S sheet 0.63mm thick, devided in compartments as per kitchen requirement including fixed with rawl plug and screws on walls complete all as specified and as directed. |
| 56 | S&F in repair Vitreous China Wash hand basin, white flat back of size 550x400 mm, bedded in cement morter and fixed on C P cantilever brackets, with following accessories all as specified & as directed :-(i) Pillar Tap 15 mm bore brass Chromium plated fancy type with capstan heads fixed to 15mm dia bore pipe(ii) Waste coupling brass chromium plated 32 mm dia suitable for wash hand basins, with long screwed shanks and fly nuts (iii) PVC waste pipe 32mm dia |
| 57 | S&F Galvanised iron pipe spout 40mm dia bore, medium grade, fixed in wall all as specified and as directed. |
| 58 | S&F in repair Vitreous China Wash down water closet pan pedastal pattern (EWC) white in colour with and including plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device including connection to outgoing pipe and flushing pipe complete all as specified & as directed . |
| 59 | S&F in repairs PVC Low level flushing cistern 10 ltr capacity, syphonicaction type, white, with inlet, ball valve, float and handle, bracket including following items etc., complete all as specified & as directed :-(i) 32mm dia PVC flush pipe, (ii) PVC connection pipe of 15mm dia 600mm long with PTMT nuts |
| 60 | S&F in repairs looking mirror of size 600mm x 450mm bevelled edge mirror of selected quality, glass 5mm thick, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 61 | S&F in repairs 15mm dia bore brass chromium plated wall mixer \\"L\\"Bend with Wall Flange for mixing hot and cold water screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and as directed. |
| 62 | S&F in repairs 15mm Bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified and as directed. |
| 63 | S&F in repairs 15mm Bib taps Quarter turn fancy type, 2 in 1 brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 64 | S&F in Repair 15mm dia Stop Valves / Angle Cock, fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and as directed. |
| 65 | S&F in repairs tubular towel rail, brass chromiun plated 20mm dia ‘D’ type, 60cm long between flanges, fixed on walls complete all as specified and directed. . |
| 66 | S&F in repairs Overhead Shower rose 95 mm dia with 3 flow, brass chromium plated with swivel joints, including fixing to steel pipe 15mm dia or union complete all as specified and directed. |
| 67 | S&F in repair ABS Health Faucet with 1 Mtr long Tube & Hook all as specified and directed. (Make: PRAYAG Cat No BEA-40 or equivalent make specified in P S and as approved by GE) |
| 68 | S&F in repairs Soap dish 150mm size, brass chromium plated fixed to wall complete all as specified and as directed. |
| 69 | S&F in repairs toilet paper holder chromium plated, complete all as specified and as directed. Make: Prayag, Cat No-BA-58 or Equivalent make specified in P S and as approved by GE |
| 70 | M & L for preparation of newly plastered wall surfaces and finishing with following specification complete all as specified and as directed :- (i) Applying 1mm thick wall care putty & finished to smooth surfaces (ii) Applying a coat of self primer(iii) Applying two coats of Acrylic distemper emulsion |
| 71 | M & L for Preparation of newly plastered ceiling surface and applying three coats of white wash complete all as specified and as directed. |
| 72 | M & L for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic weather proof emulsion paint having VOC less than 50gm / litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior grade primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 73 | M & L for Complete removal of existing treatment and preparation of wall surfaces by washing,rubbing down and stopping of distempered and painted surfaces and finishing with following specification complete all as specified and as directed :- (i) Applying 1mm thick wall care putty & finished to smooth surfaces (ii) Applying a coat of self primer(iii) Applying two coats of Acrylic distemper emulsion |
| 74 | M & L for Preparation of Old decorated ceiling surface and applying two coat of white wash complete all as specified & as directed. |
| 75 | M & L for Preparation of new wood or woodf based surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 76 | M & L for Preparation of old steel surface over 10cm with or girth and applying two coats of synthetic enemal paint complete all as specified and as directed. |
| 77 | S & F in repairs PVC (SWR) floor trap 75mm dia outlet, plain with stainless steel grating including jointing with solvent cement etc complete all as specified and as directed. |
| 78 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc. complete all as specified and as directed. |
| 79 | S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc. complete all as specified and as directed. |
| 80 | S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed. |
| 81 | S&F PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed. |
| 82 | S&F PVC (SWR) junction single T 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 83 | S&F PVC (SWR) junction single T 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 84 | S&F PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 85 | S&F PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 86 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 87 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and as directed. |
| 88 | S&F in Repair Stainless Steel Grating of 100mm dia With or Without Waste Hole complete all as specified and as directed. |
| 89 | Demolition of cement concrete(un-reinforced) of any description and in any position not otherwise specifically provided for roof /chajja padding including removal of debris outside MoD land complete all as specified and as directed. |
| 90 | M&L for PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in Padding over roof / chajja finished even and smooth without using extra cement complete all as specified and as directed. |
| 91 | M&L for screed bed 10mm thick cement mortar (1:3) on concrete roof surface finished even and smooth without using extra cement mixed with WPC complete all as specified and as directed.(Note : WPC will be measured and paid seprately) |
| 92 | M & L for water proofing treatment to RCC roof slab with the following specification complete all as specified and as directed :-(i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth(ii) Applying compatible primer/bonding bitumen @ 0.40 Litre/Sq m(iii) M&L APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017 , 3mm thick and weighing not less than 3.80kg/Sq m reinforced with non woven polyster/HMHDPE matt black finished fixed with torch applications of membrane, 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions.(iv) Applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sq m complete all as specified and directed. (v) Ponding test for 72 hours to be carried out for leakege/seepage test. |
| 93 | Supply only integral water proofing compound, ISI marked, complete all as specified and as directed. |
| 94 | Demolition of reinforced cement concrete other than ground floors, beams stair cases, landings, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 95 | M & L Form work to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings,and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished flat surfaces complete all as specified and as directed. |
| 96 | M & L for Form work to edges of concrete flats, treads, RCC/PCC bands in walls, chajjas, horizontal or sloping and similar work exc 10cm but n exc 20cm wide fair finished flat surfaces complete all as specified and as directed. |
| 97 | M&L for Reinforced cement concrete ( 1:2:4) type B-1 using 20 mm graded crushed stone aggregate) as in slabs supported on walls or similar work complete all as specified and as directed. |
| 98 | M & L for Pre cast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate for man holes cover slab, set in CM 1:4 including necessary form work complete all as specified and directed.(Note:- Reinforcement steel shall be measured and paid separatly) |
| 99 | S & F Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for Columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed. |
| 100 | S & F Mild steel TMT bars 6 to 8 mm dia and over for roof slab, cut to length, bent to shape required, including cranking, bending etc and securing with including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 101 | Excavation in post holes each not exc. 0.50 Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm thick, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and as directed. |
| 102 | M & L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundation, filling in mass concrete etc., complete all as specified and as directed. |
| 103 | S&F Mild Steel framed work such as grills, gratings, etc. with ends of bars shoulders and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 104 | M & L for Preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 105 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 106 | S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring complete all as specified and as directed. |
| 107 | S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats, washers etc., (minimum weight 90 gms) complete all as specified and as directed. |
| 108 | S & F glass corner shelf radius 250mm, 8mm thick including CP railing etc., complete all as specified and as directed. |
| 109 | S&F magnetic catcher brass body and strike plate including letting in and fixed complete all as specified and as directed. |
| 110 | S & F clothes drying system 5 feet long, pulley operated, aluminium pipes 4 Nos outer dia 22mm and inner dia 19.8mm, pulleys made up of derlin with rope guide mounted on channel pair of length 24\\" (distance between two pipes is adjustable), locking system to hide rope knot, Channel to be mounted or fixed with self tapping screws, Rope made of HDPE double core 4mm dia complete all as specified and as directed. |
| 111 | M & L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base of foot path / sub base of floor etc complete all as specified and as directed. |
| 112 | M&L for hardcore or gauge of broken stone or boulders n.exc 63mm, deposited spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 113 | M&L for Chequered cement concrete tiles of size 20 cm x 20 cm x 25 mm thick set and jointed in neat cement slurry and pointed with grey cement and no pigments over & including 20 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 114 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., and making good the distrubed surfaces of wall, floors, to match with adjoining surfaces etc complete all as specified & as directed. |
| 115 | M & L for Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 drawn in and including PVC rigid non metalic concealed conduit on stone / Brick masonary conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :- |
| 116 | One light point / ceiling Fan /Exhaust fan point/ Bell point controlled by one 5 Amps switch one way |
| 117 | One light point controlled by one 5 Amps switch two way |
| 118 | One 3 pin socket point 5 Amp on independent board |
| 119 | One 3 pin socket point 5 Amp on same board with other switches. |
| 120 | M & L for Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 2.5 sqmm size, 1100 volts grade cable conforming to IS-694 drawn in and including PVC rigid non metalic concealed conduit on stone / Brick masonary conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 2.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch all as specified & as directed. |
| 121 | Supply and fix Switch piano, flush button single pole, 5 Amps one way 230volts all as specified & as directed. |
| 122 | Supply and fix Switch piano, flush button single pole, 5 Amps two way 230volts all as specified & as directed. |
| 123 | Supply and fix Switch sokcet combination flush type 5 Amp 2/3 pin muliti purpose 230volts all as specified & as directed. |
| 124 | Supply and fix Switch socket combination flush type 6/16 Amps 3/3 pin universal multipurpose 230volts all as specified & as directed. |
| 125 | Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan all as specified & as directed. |
| 126 | Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC blocks all as specified & as directed. |
| 127 | Supply and fix Door bell electronic, multi music type, 230 volt AC all as specified & as directed. |
| 128 | Supply and fix bell Push, flush type,5 Amp, 230 volt AC all as specified & as directed. |
| 129 | S & F LED tube light fitting of 10 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and as directed. |
| 130 | S & F LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and as directed. |
| 131 | S & F Bldg security light fittings 1x35 Watt capacity LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom Opening seperate driver compartment with IP 66 protection and impact resistance of IK08 with all accessories and including connection up with twin core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and as directed. |
| 132 | S&F in repair bracket for security light fitting made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 133 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board VTPN, 415 volts, 4 way, double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified & as directed. |
| 134 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board, SPN 8 ways, 230 volts, horizontal double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified & as directed. |
| 135 | Supply and fix in repair MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity complete all as specified & as directed. |
| 136 | Supply and fix in repair MCB single pole & neutral 32 Amps 240 volts, C series,10 kA rupturing capacity complete all as specified & as directed. |
| 137 | Supply and fix MCCB 415Volts, 4 Pole, 100 Amps capacity, 16KA rupturing capacity providing in DB complete all as specified & as directed. |
| 138 | Supply and fix in repairs Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as contineuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and as directed. (Note : Three run of 4sqmm cable measured as one unit) |
| 139 | Supply and fix in repairs Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and as directed. (Note : Three run of 6sqmm cable measured as one unit) |
| 140 | M&L for taking down ceiling fan 1200mm/1400mm sweep 230 Volt 50 C/S AC of any make or model by opening the cover, separating down rod, rotor and stator assembly, re-winding if require,locating the fault and making the fan fully in serviceable condition with & including replacing the bearing with similar type of exisitng one, worn out screws of the cover, split pin, twin core flexible copper wire of size 23/0.0076, locking nuts & machine screws with spring washer for ceiling fan blades, oiling and greasing etc, finally painting the ceiling fan with one coat of spray painting with white DUCO Paint & lettering & Numbering the same as per existing,re-assembling & testing, installation on its original position complete all as directed.(Note : Re-winding will be measured & paid seperately) |
| 141 | M&L for rewinding of ceiling fan 1200mm/1400mm sweep, 230 volt, AC with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding, drying etc., complete all as specified & as directed. Please Enable Macros to View BoQ information |
| 142 | M&L for rewinding of ceiling fan 1200mm/1400mm sweep, 230 volt, AC with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding, drying etc., complete all as specified & as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Aug 28, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender