Tender For Providing Of Shed With False Ceiling Of House No 23/1 Under Ge (Central) Bangalore
Tender Value
7.51 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
12 days left
EMD
15000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Shed With False Ceiling Of House No 23/1 Under Ge (Central) Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | M&L for vitrified tiles 9-10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match with shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 2 | M&L for vitrified tiles 9-10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match with shade of tiles including 10 mm thick rendering in cement mortar 1:4 as backing coat to receive skirtings/dado complete all specified and directed. |
| 3 | M&L for factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 4 | M&L for PCC, 1:2:4 type B0 (using 12.5 mm size graded stone aggregates) as in roof kerbs or mud stops, coping, roof padding, covering in chajjas and similar works rounded or chamfered on edges complete all as specified and directed. |
| 5 | M&L for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 (Gde E-165) complete all as specified and directed. |
| 6 | S&F mild steel screw bolts of 16 to 20 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 10 cm but not exceeding 15 cm long complete all as specified and directed. |
| 7 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surface or on roof surfaces in CM 1:3 using water proofing compound as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as specified and directedNote : supply of WPC shall be measured and paid seperately. |
| 8 | M&L for rendering 10 mm thick in CM 1:3 on concrete surface as in ceiling, chajja, roof projection etc. finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick in CM 1:6 on brick/block masaonry work or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 10 | M& L for rendering 20 mm thick in two layer first layer is 10mm thick in CM (1:6) and second Layer is 10mm thick in CM (1:4) using water proofing compound as per manufacturer's instructions on stone Masonry surfaces and finished the surfaces even and smooth without using extra cement complete all as specified and directed.Note : WPC will be used in top layer only and shall be measured and paid separately. |
| 11 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and directed. |
| 12 | All as per Item No 11 above but on old surfaces incl complete removal of existing treatment complete all as specified and directed. |
| 13 | Supply only Liquid water proofing compound of approved quality complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered surface of ceilings and applying three coats of white wash complete all as specified and directed. |
| 15 | M&L for prepartation newly plastered surfaces of wall and applying two coats of oil bound distemper including a coat of cement based Wall care putty 1.5mm (Average thickness) complete all as specified and directed. |
| 16 | S&F rolled sections as in main and cross beams, hip and jack rafters; pulins where connected to common rafters and running rails; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 17 | S&F mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar work including welding conforming to Grade E-165 (Fe 290), complete all as specified & directed. |
| 18 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws complete all as specified and directed. |
| 19 | S&F pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,Ridges fixed with self tapping screws complete all as specified and directed. |
| 20 | S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with self tapping screws and washer in roof, wall etc complete all as specified and directed |
| 21 | M&L for cutting holes in brick/stoen walls built in cement mortar exc one brick & not exc two brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as required complete all as specified and directed.Note : Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall. |
| 22 | S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Grade E-165 (Fe 290) and fixed in position complete all as specified and directed. |
| 23 | M&L for providing PCC type B1, 1:2:4 (20 mm graded aggregate) in coping, block for hold fast or similar work including necessary form work and finished the surfaces to match with existing complete all as specified and directed. |
| 24 | M&L for preparation of new or previousely untreated steel surfaces over 10 cm in width or girth and applying two coats of 1st quality synthetic enemal paint over a coat of red oxide zinc chromate primer complete all as specified and directed. |
| 25 | M&L for preparation of old painted steel surfaces over 10 cm in width or girth all as specified in SSR Part-I and applying one coat of Ist quality synthetic enamel paint complete all as specified and directed. |
| 26 | S&F PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid including made of Aluminium/G.I./M.S as per specified and drg complete all as specified and directed. |
| 27 | S&F Gl frame work for seamless ceiling with size of grid 605 mm x 605 mm comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including suspended 6 mm dia GI hangers (1200mm length) adjusting level fixed to roof slab or purlins by means of ceiling cleats made out GI flat 40x3mm size 60mm long and expension holdfasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 28 | S&F clear transparent Acrylic Sheet 5mm thick durable plastic board for use as in ceilings (cut to size as required for ceiling) complete all as specified and directed |
| 29 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wall complete all as specified and directed. |
| 30 | S&F 110 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as specified and directed. |
| 31 | S&F Mild Steel Sheet 1.25 mm Thickness as in eaves gutters, galvanised class 3, half round with rounded edges of 150mm dia complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender