Tender For Special Repair To Bldg No P-49 (Veh Repair Bay) At 285 Fd Wksp Coy Under Ge (West) Delhi Cantt-10.
Tender Value
44.82 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
9 days left
EMD
89640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-49 (Veh Repair Bay) At 285 Fd Wksp Coy Under Ge (West) Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of CGI (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge complete all as spd & directed.(Note :Height of workshop building up to 15 Mtr approx as a single story) |
| 2 | S&F pre-painted galvalume aluminium zinc coated (150GSM) GI based corrugated steel sheet 0.50 mm thick of any colour as approved by GE having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as spd & directed. (Note :Height of workshop building up to 15 approx Mtr as a single story) |
| 3 | S&F pre-painted galvalume aluminium zinc coated (150GSM) GI based plain steel sheet or machine moulded profile ridge/corrugated steel sheet ridge 0.50 mm thick of any colour as approved by GE having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as spd & directed.(Note : Height of workshop building up to 15 Mtr approx as a single story) |
| 4 | M&L for mild steel work for grills, grating ,angle brackets, cleats, support , holdfast, circular/squre pipe etc confirming Fe 410W (Gde E-250 quality A) fixed in concrete/brick wall surface including welding or fasner members complete all as specified and as directed. (Note : Height of workshop building up to 15 Mtr approx as a single story) |
| 5 | S& F mild steel wire of dia 4mm for fixing of nylon wire net/nylon rope including necessary arrangement etc. complete all as specified and directed by Engineer -in- charge. (Note : Height of workshop building up to 15 Mtr as a single story) |
| 6 | M & L for bird hazardous nylon wire net of 1.5 mm dia and avg apertur of net approx. 50mm, overlap of nylon wire net 100mm, including nylon rope of dia 10-12mm , U bolt clamp of size 30mm/ round ring of dia 30 mm , D shackle of 50mm and including all arrangement for fixing the net complete all as specified and directed by Engineer -in- charge.(Note : Height of workshop building 9-10 Mtr as a single story)Note : Overlap of net shall be measured separate. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M&L vitrified coloured tiles in floor 600x600x8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding layer in CM 1:4 for laying floor finishes complete all as spd & Directed. |
| 9 | M&L for Glazed ceramic coloured tiles in vertical surface,450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles in patch work repair including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 10 | M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) for plinth protection over rammed earth finished even & fair complete all as spd and directed. |
| 11 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd & directed. |
| 12 | All as per item No. 11 above but n. exc 1.5 sq. m each.complete all as spd & directed. |
| 13 | M&L for powder coated (50 micron) Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing, silicon packing etc complete all as specified and directed. (note : measured only aluminium part as per SSR part-1) |
| 14 | S&F powder coated (50micron) aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed. (Height of workshop building up to 15 Mtr as a single story) |
| 15 | S&F 5.5 mm thick Sheet glass, selected quality and fixed to aluminium joinery as per site required complete all as spd & directed. |
| 16 | M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window complete all as specified & directed. |
| 17 | Supply and fixing plain ACP Board 5 mm thick, fixed in aluminium joinery/partitions including cutting, packing, finishing .complete all as spd & directed. |
| 18 | S&F for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, uinal Partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bedding in CM 1:6. includig dismantling old plaster complete all as specified and directed. |
| 19 | M&L for solid WPC (Wood Polymer Composite) sheet 18mm thick (water proof and termite proof) prelaminated one side with decorative choice colour and other side balancing white as in cup board shutter. The sheet shall be finished all edges with 0.5mm beading/ lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacture's instruction, specification and as directed. |
| 20 | S&F in repair 40 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 21 | S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished same as existing model for almirah and cup board . complete all as spd & directed. |
| 22 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hold fast complete all as specified and directed. |
| 23 | Complete removal of existing treatment of painting by scraping, brusing, wahing down to open the brick or concrete original surface of walls or to bricks on edge in floors, surface channels, roofs, etc complete all as spd & directed. |
| 24 | M&L for providing not exceeding 1mm thick wall care putty on wall surface exterior/interior grade complete all as spd & directed. |
| 25 | M&L for preparing surface of wall and applying two coat of oil bound distemper all as specified and directed. |
| 26 | M&L for Ready Mix plaster 15mm thick on brick or concrete surface of internal and external walls finished even and fair surface without using extra cement including taking down plaster any layer/thick complete all as specified and as directed. (Note :Height of workshop building up to 15 Mtr as a single story) |
| 27 | M & L preparation of new surfaces plastered of wall two coats of distempering walls with distemper oil emulsion over 1mm thick wall care putty, white or tinted over a coat of primer complete all as specified and directed. (Note :Height of workshop building up to 15 Mtr as a single story) |
| 28 | M&L for Preparation of old plastered surfaces of walls and applying two coats of cement based paint white or tinted ,complete all as specified. (Note :Height of workshop building up to 15 Mtr as a single story) |
| 29 | M&L for preparing new surface of wall and applying two coats of cement paint, white or tinted over one coat of alkali resistant primer complete all as spd & directed. (Note :Height of workshop building up to 15 Mtr as a single story) |
| 30 | Taking down existing unserviceable rolling shutter complete of any size and any type and removing from site.complete all as spd & directed. |
| 31 | S & F,rolling shutter with thickness of laths 1.25 mm including top cover, anchoring rod, hasp and staple, ball bearing, spring and one shop coat of primer and erect with gear operated type with bevel gear box and crank handle, with 1.25 mm thick laths all as specified and directed. |
| 32 | M&L for preparation of new steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over a coat of red oxide primer complete all as spd & directed. |
| 33 | M&L for preparation of old painted steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint complete all as spd & directed. (Note : Height of workshop building up to 15 Mtr as a single story) |
| 34 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 35 | M & L Cement concrete type A1 1:1.5:3 (20mm graded aggregate) and finished the surface even and smooth without using extra cement as in Floors and pavings, etc all as specified and as directed. |
| 36 | Forming 12 mm thick expansion joints filled with pre formed bituminous filler with glass strip and top 30 mm primed and sealed with sealing compound Gade A depth upto 100mm complete all as specified and directed. |
| 37 | Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil and removing debrish beyond MOD land complete all as specified and directed. |
| 38 | M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed. |
| 39 | M&L for minimum 80mm thick precast glossy finished PCC interlocking blocks of grade M-40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 in coloured tile to make a pattern as directed, laid over and including 30mm thick sand cusion complete all as specified and directed. |
| 40 | M&L brick work with subs class \\"B\\" bricks straight or curved on plan exc 6 mtr mean radius built in cement mortor (1:6). Including demolation of old brick build in cement mortar complete all as specified and directed. |
| 41 | M&L for 3-4mm thick solid polycorbonate transparent sheet complete all as specified and as directed. |
| 42 | M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for column,beam, slab etc. hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, Complete all as specified and as directed by Engr in Charge. |
| 43 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings, conduits, sunken box, etc.) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed. |
| 44 | M&L for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor with FRLS cable 1.5 Sqmm size 1100 volts grade in new modular metal flush box and providing modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :- |
| 45 | (a) One light/fan/bell point controlled by one way switch 5 amps. complete all as spd & directed. |
| 46 | (b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. complete all as spd & directed. |
| 47 | (c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. complete all as spd & directed. |
| 48 | M&L for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor with FRLS cable 2.5 Sqmm size 1100 volts grade in new modular metal flush box and providing modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 2.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified for One 3 Pin socket 15/16 A Indepentent board.complete all as spd & directed. |
| 49 | Ditto- all as per Item No. 48 here-in-before but with cable 4 Sqmm size. complete all as spd & directed. |
| 50 | S&F Modular switch 1 way 5/6 A, 1 module complete all as specified and directed. |
| 51 | S&F Modular switch 1 way 15/16 A,1 module complete all as specified and directed. |
| 52 | S&F of Modular socket outlet 5/6 A, 2/3 pin, combined 2 module complete all as specified and directed. |
| 53 | S&F of Modular socket outlet 15/16 A, 2/3 pin, combined 2 module complete all as specified and directed. |
| 54 | Supply and fix in repair for submain wiring with two run single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm for submain wiring and connection complete with including rigid PVC conduit or existing conduits as required on site FRLS grade, and one run of 6.0 sqmm unsheathed copper conductor stranded cable as earthwire dully connected to common earth complete all as specified and directed. |
| 55 | Supply and fix submain wiring with four runs single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm for submain wiring and connection complete with including rigid PVC conduit or existing conduits as required on site FRLS grade, and one run of 6.0 sqmm unsheathed copper conductor stranded cable as earthwire dully connected to common earth complete all as specified and directed. |
| 56 | S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and directed.NOTE (a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 57 | S&F in repair of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for 4 pole MCCB as incommer and 12 SP MCBs outgoings complete all as specified.NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 58 | S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified & directed. |
| 59 | S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete all as specified and directed. |
| 60 | S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed. |
| 61 | S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. |
| 62 | Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and as directed. |
| 63 | Supply and fix in repair sheet metal enclosure triple pole and Neutral with a three pin and earth plug and socket complete with a MCB TP 32 Amp 415 volts, 50 Hz, 10KA breaking capacity complete all as specified and as directed. |
| 64 | Supply and fix in repair LED batten luminaire surface mounted system wattage of 20 watts and system lumen efficacy=>100 lm/watt output, power factor=>0.9, color temperature 3000K- 6500 K, voltage range - 150 to 270 volts AC and including connecting up with PVC sheathed copper conductor flexible wire, complete all as specified and directed. |
| 65 | Supply and fixing in repairs energy saving environment frindly & robust Canopy Light suitable for recessed mounting, Al die cast housing, System efficacy min. 115 lm/W, IP 65 protected luminaire of capacity 75 watts, wide voltage operating range of 120 V - 270 Volts & Surge Protection Upto 4 kV complete all as specified and directed. |
| 66 | Taking down exhaust/wall mounted fans, sealing cable end, dismantling blades and removing fan and blades and deposit to MES storeyard complete all as specified and directed. |
| 67 | S&F Exhaust fan 450 mm sweep, copper winding, metal body, with blades, frame and louvers, mounted in suitable opening arrangement in brick wall/window, suitable for operation on 220-240 volt, single phase, AC supply and connecting up using flexible wire complete all as specified and directed. |
| 68 | Supply and fix wall mounting fan of sweep 600 mm sweep, aerodyanamically designed, metallic body, 230 volts, 1380 rpm, 180 watt with copper motor & rust proof body, duly mounted on wall/pillars/truss with clamp complete all as specified and as directed. |
| 69 | S&F surface mounting LED building security light fitting fitted in high pressure die cast aluminium housing not less than 70 W including fabrication of GI bracket suitable for fixing of LED light fitting duly fixed with clamps, nut bolts & washer etc. Fixture should have minimum efficacy at system level >=100 lumens/Watt, an operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 70 | S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 71 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender