Tender For Repair/Maintenance And Cushioning Of Furniture Under Ge West Delhi Cantt-10
Tender Value
49 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/Maintenance And Cushioning Of Furniture Under Ge West Delhi Cantt-10- 1 Chair Cbt Steel With Arms/ Without Arms : Fd-75 (M), Fd-120 (M), Fd-386 S&F Following Components Of Chair Cbt Steel With Arms/Without Arms Including Dismantling Taking Out Carefully & Replace Old Components Of Chair. Complete All As Shown On Drg, Specified And Directed By The Engineer-In-Charge. Qty - 300 2 Dismantling, Taking Out Carefully Old Existing Seat Of Any Description & Replacement Of The Same With S&F New Seat Made Out Of 12 Mm Thick Plywood Commercial Quality Isi Mark Covered With 75Mm Thick, 40 Density Pu Form And Best Quality Tapestry Cloth Of Rate Ranging Rs 250-300/- As Well Seat Should Be Fixed Through 02 Nos Ms Stiffner Size 25Mmx4Mm(Duly Two Coat Of Black Enamel Paint Over A Coat Of Red Oxide Primer) & Suitable Nut/Boltscrews Completed All As Shown On Drg, Specified & Directed By The Engr-In- Charge. 3 Dismantling, Taking Out Carefully Old Existing Back Of Any Description & Replacement Of The Same With S&F New Back Made Out Of 12 Mm Thick Plywood Commercial Quality Isi Mark Covered With 75Mm Thick, 40 Density Pu Form And Best Quality Tapestry Cloth Of Rate Ranging Rs 250-300/- As Well Back Should Be Fixed Through 02 Nos Ms Stiffner Size 25Mmx4Mm(Duly Two Coat Of Black Enamel Paint Over A Coat Of Red Oxide Primer) & Suitable Nut/Boltscrews Completed All As Shown On Drg, Specified & Directed By The Engr-In- Charge. 4 Replacement Of Arms Rest With S&F New Arms Rest Made Out Of Black Integral Skin Polyurethne Reinforced With Ms Insert And Shall Be Scratch And Weather Resistance Of Chair Briefing Static Baised All As Shown On Drgs Specified & Directed By The Engr-In- Charge.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | CHAIR CBT STEEL WITH ARMS/ WITHOUT ARMS : FD-75 (M), FD-120 (M), FD-386 S&F following components of chair CBT steel with arms/without arms including dismantling taking out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 300 |
| 2 | Dismantling, taking out carefully old existing seat of any description & replacement of the same with S&F new seat made out of 12 mm thick Plywood Commercial Quality ISI mark covered with 75mm thick, 40 density PU form and best quality tapestry cloth of rate ranging Rs 250-300/- as well seat should be fixed through 02 Nos MS stiffner size 25mmx4mm(duly two coat of black enamel paint over a coat of red oxide primer) & suitable Nut/BoltScrews completed all as shown on drg, specified & directed by the Engr-in- Charge. |
| 3 | Dismantling, taking out carefully old existing back of any description & replacement of the same with S&F new back made out of 12 mm thick Plywood Commercial Quality ISI mark covered with 75mm thick, 40 density PU form and best quality tapestry cloth of rate ranging Rs 250-300/- as well back should be fixed through 02 Nos MS stiffner size 25mmx4mm(duly two coat of black enamel paint over a coat of red oxide primer) & suitable Nut/BoltScrews completed all as shown on drg, specified & directed by the Engr-in- Charge. |
| 4 | Replacement of Arms rest with S&F new Arms rest made out of black integral skin polyurethne reinforced with MS insert and shall be scratch and weather resistance of chair briefing static baised all as shown on drgs specified & directed by the Engr-in- Charge. |
| 5 | Replacement of shoe/Cap with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws complete all as shown on drgs specified & directed by the Engr-in- Charge. |
| 6 | M&L for one coat of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the chair CBT steel with arms/without arms, paint them through a spray machine to obtain a high gloss finish similar to new furniture |
| 7 | CHAIR DINING : FD-16(M), FD-203, FD-228, FD-279, FD-1105 : Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 2000 |
| 8 | Dismantling, taking out carefully of old existing broken back leg of the chair of any description & replacement of the same with S&F new back leg of Ist class HW (TW), made to shape, fixed in position. complete all as specified and directed. |
| 9 | All as per item 2.01 here in before but replacement of front leg with S&F new front leg made out of Ist class HW (TW). complete all as specified and directed. |
| 10 | All as per item 2.01 here in before but replacement of side rail with S&F new side rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. complete all as specified and directed. |
| 11 | All as per item 2.01 here in before but replacement of front or back rail with S&F new front or back rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. complete all as specified and directed. |
| 12 | All as per item 2.01 here in before but replacement of stiffener with S&F new stiffener made out of Ist class HW (TW) complete all as shown on drgs. complete all as specified and directed. |
| 13 | All as per item 2.01 here in before but replacement of back strip with S&F new back strip made out of Ist class HW (TW) complete all as shown on drgs. |
| 14 | Provn. of new angular bracket with 08 Nos steel screws suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm complete as approved and all as shown on drgs. |
| 15 | Removing existing cane from seat of chair dining and provn of new cushion to seat made of 50 mm thick 'PU' foam, 40 density, ISI marked ( covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 300/- per RM) duly wraped with long cloth. The cushion shall be fixed on top of 12mm ply BWR. The plywood to be cut as per size of chair dining seat and fixed to frame with screws as directed and specified by Engineer-in-Charge /GE. |
| 16 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 17 | Polishing one coat to Chair Dining with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. complete all as specified and directed. |
| 18 | CHAIR EASY OF SORTS : FD-17(M), FD-201, FD-229, FD-281, FD-1108 : Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-1500 |
| 19 | Dismantling, taking out carefully old existing broken back leg of the chair easy of any description & replacement of the same with S&F new back leg of Ist class HW (TW) made to shape, fixed in position. complete all as specified and directed. |
| 20 | Replacement of front leg with S&F new front leg made out of Ist class HW (TW). complete all as specified and directed. |
| 21 | Replacement of side rail with S&F new side rail for seat made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. complete all as specified and directed. |
| 22 | Replacement of front & back rail for seat with S&F new front & back rail made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side. complete all as specified and directed. |
| 23 | Replacement of side rail for back frame with S&F new side rails for back frames made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side. complete all as specified and directed. |
| 24 | Replacement of top and bottom rail for back frame with S&F new top and bottom rail made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side. complete all as specified and directed. |
| 25 | Replacement of front support rail with S&F new support rail made out of Ist class HW (TW). complete all as specified and directed. |
| 26 | Replacement of Arm rest with S&F new Arm rest made out of Ist class HW (TW). complete all as specified and directed. |
| 27 | Provn of new angular bracket with 04 Nos steel screws of suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm. complete all as specified and directed. |
| 28 | Removing existing cane from seat & back of chair easy and provn of new cushion to seat & back made of 50 mm thick 'PU' foam, 40 density, ISI marked covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 300/- per RM) duly wraped with long cloth. The cushion shall be fixed on top of 12mm ply BWR. The plywood to be cut as per size of chair easy seat and back and fixed to frame with screws as directed and specified by Engineer-in-Charge /GE. |
| 29 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, complete all as specified and directed. |
| 30 | Polishing one coat to Chair easy with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. complete all as specified and directed. |
| 31 | SOFA SET 5 SEATER : FD-258, FD-281, FD-373, FD-1113 : S&F cushion of size 21\\" x 22\\" for sofa set five seater ( 3+1+1) with density 40 and thickness 100mm. Cushion shall be supplyed with tapestry cloth of cost not less than Rs 350 per/meter. The tapestry should be provided with zip arrangement so that it could be perfectly fixed on cushion. The colour and quality of tapestry cloth will be decided by Engr-in-Charge/GE. Qty-80 |
| 32 | Polishing one coat to Sofa Set 5 seater with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. complete all as specified and directed. |
| 33 | SOFA SET TO SEAT 4 (SET OF 4 SINGLE SOFA CHAIRS) :FD-258, FD-281, FD-373, FD-1113 S&F cushion of size 21\\" x 22\\" for sofa set four seater (Set of 4 single chair) with density 40 and thickness 100mm. Cushion shall be supplyed with tapestry cloth of cost not less than Rs 350 per/meter. The tapestry should be provided with zip arrangement so that it could be perfectly fixed on cushion. Make of cushion shall be Sleepwell/SpringWell/Kurlon. The colour and quality of tapestry cloth will be desided by Engr-in-Charge/GE. Qty-60 |
| 34 | Polishing one coat to Sofa Set 4 seater with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. complete all as specified and directed. |
| 35 | CHAIR DINING OFFICER (MAP) FD/MAP-II/04 ,FD-E6-MAP-10 :S&F cushion seat for chair dining cushion 75 mm thick ,40 density PU foam seat of (Make- Sleepwell/SpringWell/Kurlon) to chair dining duly covered with tapestry cloth of range not less than Rs.350.00 per meter, colour, shade and quality of tapestry Cloth shall be as approved by EIC & GE complete all as specified and directed. Qty-800 |
| 36 | Polishing one coat to Chair Dining Officer (MAP) with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender