Tender For Misc Repairs To Path, Culvert, Drainage, Boundary Wall, Fencing And Allied Works Under Under Age B/R P-1 At Faridkot Mil Stn
Tender Value
45 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
4 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridkot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc Repairs To Path, Culvert, Drainage, Boundary Wall, Fencing And Allied Works Under Under Age B/R P-1 At Faridkot Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete all as specified and directed . |
| 2 | Demolition cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed . |
| 3 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brickwork etc. and making good disturbed ground complete all as specified & directed by Engr-In-Charge. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as specified |
| 5 | Dismantling fencing wire mesh, any type, all as specified |
| 6 | Dismantling of Stone slabs and tiles of any description or thickness in floors, plateform, apron etc laid bedded and pointed in any mortar including PCC bedding also removing rubbish material from building and thrown in low lying empty area at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Supply Mild steel round bars, in available lengths required to fix in fencing as directed. |
| 8 | S&F angle iron posts and struts in fencing including cutting tops of shape as directed, drilling holes, notching for wire, etc.,flat iron fillets and round bars with hooks at ends (for securing wire mesh etc.) includindall necessary drilling, bolting or riveting, etc, and similar work confirming to Fe -290 Gde E-165 complete all as specified & directed by Engr-In-Charge. |
| 9 | Fixing only angle iron posts and struts in fencing retrived from dismentling including cutting tops of shape as directed, drilling holes, notching for wire, etc.,flat iron fillets and round bars with hooks at ends (for securing wire mesh etc.) includind all necessary drilling, bolting Welding or riveting, etc, on existing post and similar work confirming to Fe -290 Gde E-165 complete all as specified & directed by Engr-In-Charge. |
| 10 | Material and labour for PCC 1:3:6 type C2 using (40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 11 | S & F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and incudin provision of galvanised mild steel wire complete all as specified.(Note :- Each line shall be measured and paid for separately.) |
| 12 | M&L for punched tape concertina coil, tied with angle iron post with necessary bolts and connections complete all as specified and directed. |
| 13 | Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 14 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wirecomplete all as specified and directed. |
| 15 | M&L for PCC 1 : 4 : 8 Type D2 ( 40 mm graded aggregsate) in foundation filling and mass concrete as in base fdn etc complete all as specified and directed by Engr-In-Charge. |
| 16 | M&L for sand filling under floors 25 mm thick including watering and consolidation etc complete all as specified and directed by Engr-In-Charge. |
| 17 | Material & Labour for Machine pressed precast concerte interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment all as specified and directed by Engr-In-Charge. |
| 18 | Material & Labour for 75mm thick PCC type D-2 1:4:8 as in sub base, sub floors, floors and pavings all as specified and directed by Engr-In-Charge. |
| 19 | Material & Labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick or other approved size, laid over 25 mm thick screed bed in CM 1:6 set, jointed and pointed in neat cement slurry in floors all as specified and directed by Engr-In-Charge. |
| 20 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including necessary excavation in fdn, removal excavated soil and making drainage opening wherever required complete all as specified and as directed by Engr-In-Charge. |
| 21 | M&L for preparation new concrete/bricks surface of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over primer complete all as specified and directed by Engr-In-Charge. |
| 22 | M&L for 50 mm thick Cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in hard standing , path etc including Use and waste of form work/screed strips and to divide the area in panels and finishing the surface even and smooth without using extra cement all as specified and directed. |
| 23 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified & directed by Engr-In-Charge. |
| 24 | M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified & directed by Engr-In-Charge. |
| 25 | M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in bulit in C:M 1:6 all as specified & directed by Engr-In-Charge. |
| 26 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed by Engr-In-Charge. |
| 27 | M&L for rendering 10-15 mm thick ready mix mortar on wall surface of any description and finishing the surface even & fair complete all as specified & directed by Engr-In-Charge. |
| 28 | Preparation of newly plastered surfaces of walls etc., and applying two coats of cement base paint complete all as specified & directed by Engr-In-Charge. |
| 29 | Preparation of old plastered surfaces of walls etc., and applying two coats of cement base paint complete all as specified & directed by Engr-In-Charge. |
| 30 | Material and labour for preparation of new steel & iron surfaces of any description, exceeding 10 cm in width or girth and applying Two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 31 | M&L Preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint as in existing posts, fencing etc complete all as specified. |
| 32 | Material and labour for preparation of new or previously untreated surfacesof steel & iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying Two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 33 | M & L for Cement concrete 1:2:4 (12.5 mm aggregate) in benching , haunching , coping , surface channels and filling a complete all as specified & directed by Engr-In-Charge. |
| 34 | M&L for Providing precast cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) in cover slabs for man holes, window or door cills, , drain cover slab etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete. Note:- Necessary reinforcement will be measured and paid separetly. |
| 35 | Mild steel bars of TMT 10mm dia and over, cut to length bent to Shape required incl cranking, bending spirally for hooping for columns, tie bars/dowel bars in longitudinal joints/transverse joints etc, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 36 | RCC (Nominal mix) 1:2:4 type B-1 (using 20mm graded stone aggregate) in drain,Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses |
| 37 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work like drains including attached pillasters, buttresses etc.; vertical or to batter for flat and fair finished surfaces all as directed and specified. |
| 38 | S&F in Repair Reinforced concrete pipes, class NP2, 300 mm Dia laid and jointed complete with collars all as specified and directed . |
| 39 | Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 Type C2 for 300mm Dia Pipe all as specified and directed . |
| 40 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender