Tender For Repair And Renovation Of Amarda Phc Building In The District Of Balasore Under Ama Hospital Initiatives Phase Ii For The Year 2026-27
Tender Value
67.79 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
11 days left
EMD
67790
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Amarda Phc Building In The District Of Balasore Under Ama Hospital Initiatives Phase Ii For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per direction of Engineer in charge. |
| 2 | Dismantling and removing doors, windows & ventilators including removal of frame,hinges,fastenings and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 3 | Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50 m lead etc complete |
| 4 | Dismantling & removing R.C.C. Columns, beams,slab, staircase landing lintels includingstacking the useful material for reuse and removing the debris within 50 meter lead. |
| 5 | Dismantling brickwork, stone nasonry in clay under 3meter height including stacking the useful material for reuse and removing the debris within 50 meter lead. |
| 6 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 7 | 4cm thick grading concrete (1:2:4) on roof slab using 12mm & downgraded size hard granite chips for old work including providing chicken mess with cost, conveyance, royalties and all taxes of all materials and cost of all labour with T & P required for the work complete. |
| 8 | 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment with cost, conveyance, royalties and all taxes of all materials and cost of all labour with T & P required for the work complete.treatment. |
| 9 | 12mm thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. |
| 10 | Supplying fitting & fixing of MS doors, windows, grill & grill gate including cost conveyance and taxes of all materials, cost of all labour,T&P required for the work etc. complete as per the direction of Engineer in Charge. |
| 11 | Supplying, fitting, fixing up window (sliding type) made up aluminium section 151-154, 151-155,aswindow frame Section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C |
| 12 | Labour for fitting and fixing mosquito net in windows including non-sal wood beading with cost of nails and screws but excluding the cost of mosquito net. |
| 13 | Supplying, fitting, fixing in all floors fully glazed aluminium framed openable windows using 15 micron anodised OEL aluminium section 2082 as out section,9139 as mullion section,4124 as a shutter section frame with tapered clip of section4125,aluminium angle,rubber beading,friction stay and handle etc.with 5mm black glass including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C |
| 14 | Providing fitting, fixing of Al. Door with OEL anodized Al. door section 9202 as vertical member, 9201 as top member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1885 including all cost of labour, T&P hire charges of drilling machine, labour charges etc.complete |
| 15 | Supplying and Laying of Heavy duty factory made hydrualically pressed and mechanically compacted free cast interlocking approved brand pavers of 80mm thick coral shaped on preparation of sub base with 50mm sand and levelling laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc. complete as per direction of Engineer-In-Chief. |
| 16 | Painting two coats with any approved paint to new wood/ iron work over a coat of primer including sand papering, polishing the surface, including cost conveyance and all taxes of all materials along with T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge. |
| 17 | Distempering two coats over a coat of primer of approved shade including cost conveyance taxes of distemper and cost of all labour with T&P required for the work etc.complete as per direction of Engineer in charge. |
| 18 | Providing fitting and fixing of G YPSUM ceilling with aluminium anodised T Section No. 3215 with 2'-0\\" centr to center, L Section No.1705 up to 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2'-0\\" x 2'-0\\" suspended from ceiling etc. complete. |
| 19 | Earth work in hard soil with all leads & lift including rough dressing and breaking clods etc. complete. (By Mechanical means) |
| 20 | Finishing wall surface with Acrylic wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials labour T&P etc complete. |
| 21 | Wall painting two coats with any approved quality of Weather seal coat over a coat of primer to give an even shade including cost of all materials,labour, T&p required for the work complete. |
| 22 | Double Under ream Pile foundation with RCC M20 using 12mm size black hard granite chips including cost of boring but excluding the cost of MS/Tor steel and labour charges for cutting, bending, binding of steel. |
| 23 | Earth work in excavation of foundation in hard soil with initial kead and lift etc. complete. |
| 24 | Filling foundation and plinth with sand well watered and rammed with cost carriage of all materials etc. |
| 25 | Cement concrete 1:3:6using 4cm size bhg. Metal with cost carriage of all materials and labour etc. |
| 26 | Cement concrete of proportion (1:2:4) with 12mm (1/2\\") size hard granite crusher broken chips including watering curing, cost, conveyance, royalties and all taxes of all materials labour with T&P required for the work etc.complete as per direction of Engineer-in-charge. |
| 27 | R.C.C. work of M-25 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete.Pile cap/ gate pillar |
| 28 | Grade Beam |
| 29 | Column |
| 30 | Lintel |
| 31 | chajja |
| 32 | Roof beam |
| 33 | Staircase |
| 34 | Roof slab |
| 35 | Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 36 | Fly ash Brick work (1:6) in substructure including all labour and material etc complete. |
| 37 | Fly ash Brick work (1:6) in superstructure including all labour and material etc complete. |
| 38 | 16mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc. |
| 39 | Fixing Vetrified tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 40 | Fixing Ceramic glazed tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 41 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 42 | Dressed seasoned salwood work framed and fixed (w&p) in trusses purlins frames of doors windows and ventilators |
| 43 | Providing 32mm thick factory made one side laminated flush door shutter with as per IS-2002/92 with splid core BWR Block Board from seasored and treated 2nd class hard wood ,batten binded with phenol formal delite synthetic resigne pressed over suitable adhesive including providing stainless steel hinges,locking arrangement and other fittings and fixed complete in all respect as per direction of Engineer in charge. |
| 44 | providing fitting and fixing G.I. grill gate with ornamental design made out of G.I. angle with flat with cost of all materials etc. |
| 45 | Labour charges for fitting and fixing M.S. grills and grill gate with c.c. 1:2:4 using 12mm size cb. Chips etc. |
| 46 | Supplying ,fitting & fixing M.S Angle including Beam, Truss, Purlin, Coulmn, Base plate, Top plate, M.S Channel & Angles of approved design etc, complete. |
| 47 | Spplying and fixing big six or trafford AC sheets in roof including fixing of ridges and wind ties etc. complete but excluding cost of fitting |
| 48 | Providing and Fixing of aluminum composite panel glazing fixed to wall surface of approved made and quality with ALSTRONG ACP 3mm thick mirror finish of exterior grade, the size of of outer aluminum square frameas 100x44 mm , inner aluminum square frame of 50x63 mm . Accessories such as stainless steel screw, VHP tape, 789 grade silicon, coir etc. complete including cost, conveyance, taxes of all materials, labours, cerntring & shuttering charges etc complete.The section are to be cut to length, meter joint with croner bracket & frame are fixed to the concrete/ masonary wall by means of self expanding screws etc. complete. |
| 49 | Construction of GSB by providing clsoe graded GSB grading-VI materials as per Table 400-1, spreading in uniform layers with mortar grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with V.R.R to achieve the desired density complete as epr clause No.401 of MORT&H specification for road & Bridge work (5th revision) |
| 50 | Supplying, fitting & fixing in all floors for window. made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge. |
| 51 | Iron work wrought and put up in windows grating including drilling holes etc complete.3\\" G.I pipe (zindal) |
| 52 | 6\\" I Beam |
| 53 | providing fitting and fixing stainless steel lettter with cost of all materials, taxes, labour etc. |
| 54 | PH WORK Supplying all materials, labour T&P and dismantling the damaged squatting type water closet and urinal plates etc. and mending good the damages to the floor and removing the debris at a safe distance as per direction of E.I.C. |
| 55 | Supplying all labour, T&P and dismantling and removing old tile flooring including removing the base course and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 56 | Supplying all labour, T&P, and dismantling and removing old tile cladding from wall including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m intial lead. |
| 57 | Dismantling and removing old 25mm thick A.S.Flooring including staking the useful materials for reuse and removing the debrises with 50m intial lead etc. all complete as per specification & direction of E.I.C. |
| 58 | Supplying all labour, T&P and dismantling and removing old cement plaster from walls including racking our joints 12mm deep and removing the debrises within 50m lead all complete as per direction of E.I.C |
| 59 | Supplying all materials, labour T&P and fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specification and direction of EIC- Ground Floor |
| 60 | Supplying all materials, labour T&P and fixing porcelain glazed tiles in dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge.[Gr. Floor] |
| 61 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 62 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 63 | Supplying all materials, labour T&P and fixing Water closet, (Orissa pattern squating pan) duly embeded in C.C. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C.- 580mm Orissa pan (Cerra/Parry ware/ Hindware) |
| 64 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral S or P trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C-- E.W.C. with S trap Plain(Cerra/ Parry ware/ Hindware) |
| 65 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Cerra/Parry ware/ Hindware) |
| 66 | Supplying all materials, labour T&P and fitting & fixing SWR ventilating pipes and fittings of the following O.D conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.- 110 mm dia PVCSWR Pipes |
| 67 | 110 mm dia PVC SWR P Trap |
| 68 | 110 mm dia PVC SWR Door Tee |
| 69 | 110 mm dia PVC SWR Door Bend |
| 70 | 110 mm dia PVC SWR Plain Bend |
| 71 | 110 mm dia PVC SWR Offset |
| 72 | 110 mm dia PVC SWR Cowl |
| 73 | 125 mm dia C.P.grating |
| 74 | 75 mm dia SWR Pipes |
| 75 | 75 mm dia PVC SWR Plain bend |
| 76 | 75 mm dia PVC SWR Door bend |
| 77 | 110 mm dia PVC SWR Nahani trap without Jally |
| 78 | Supplying all materials, labour T&P and cutting holes through brick/stone masonary walls for taking PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. - 250 mm to 375mm thick wall |
| 79 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Cera/ Parry ware/ Hindware) |
| 80 | Supplying all materials, labour T&P and fixing padestrial for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Parrywear/Cera/Hindware) |
| 81 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.-- 600mm x 450mm B.E. Mirror (fixed type) |
| 82 | Supplying all materials, labour T&P and fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C. -- 20 mm x 600 mm long C.P Towel rail |
| 83 | C.P. Towel Ring (St.) |
| 84 | Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of E.I.C C.P.Soap Holder. |
| 85 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C -- 450x125mm size Plate Acrylic Shelf |
| 86 | Supplying all labour, T&P, materials & fixing wash Labortary sink with M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C. -- 600mm x 450mm x 200mm Stainless Steel sink.[Including C.P. Waste & PVC Waste Pipe] |
| 87 | Supplying all materials, labour T&P and fixing bowl pattern urinal including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C.-- Flat back lipped wall urinal (standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe[CerraParrywear/Hindware] |
| 88 | Supplying all materials,labour, T&P and fixing glazed earthen ware Squatting platesize 450 x 350 mm with integral longitudinal flushing pipe including embedding the plate in 25mm thick cement mortar (1:8) laid over PCC (1:5:10) using 40 mm size metal etc all complete as per specification and direction of the E.I.C.- Squatting urinal(ISI mark) (Parry ware/hind ware/Cerra) |
| 89 | Supplying all materials, labour, T&P and cleaning the liquid sludge etc. all complete and disposing them outside as per direction of E.I.C-liquid Sludge |
| 90 | Supplying all labour, T&P and dismantling and removing RCC Slab including stacking the useful materials for reuse on removing the debrises within 50m lead as per direction of E.I.C. |
| 91 | Supplying all materials, labour T&P and providing c.c (1:1.5:3) using 12 mm h.g. chips including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 92 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% in including watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. - In Foundation & Plinth in CM (1:4) |
| 93 | Supplying all materials, labour, T &P and providing C.C (1:1.5 :3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C. |
| 94 | Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite etc. complete as per directio n of E.I.C. |
| 95 | Supplying all materials, labour, T&P and providing rigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per direction of E..I.C.-- R.C.C.Slab |
| 96 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.-- 12mm thick C.P with C.M. (1:4) |
| 97 | 20mm thick C.P with C.M. (1:4) |
| 98 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 99 | Supplying all labour, materials T&P and fixing of R.C.C. Baffle wall pre-cast with C.C. (1:1.5:3) using 12 mm b.h.g. chips and fitted to septic tank as per P.H. Specification and direction of E.I.C. |
| 100 | Supply all materials ,labour,T&P providing fitting and fixing PVC. Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size h.g. chips all complete including watering curring,conveyance of all \\"materials to work site .payment of royality .taxes its all complete as per specification and direction of E.I.C.-11OmmXI 10mm X110mm PVC Tee |
| 101 | Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips and placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C |
| 102 | Supplying all materials, labour T&P and costructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1 1.5:3) using 12 mm size h.g. chips foundation concrete (1:3:6) using 40 mm size h.g. metal on bed and arround trap Fly Ash brick work in c.m. (1:6) in F&P and inside 12mm thick c.p (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C. Inside size 250mm x 250mm gully trap Chamber |
| 103 | Supplying all materials, labour T&P and constructing Inspection chamber of the following sizes with c.c (1:3:6) using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in c.m (1:6), moulding and shaping the channel inside and benching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab in c.c. (1:11/2:3) using 12 mm size h.g. chips with R.C.C. m.h. cover, e.w. in excavation in all kinds of soil and refilling the cavity arround the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. Inside size 760mm x 760mm x 460mm I.C. |
| 104 | Supplying all materials, labour T&P and Repairing of damaged Inspection Chamber /with moulding and shaping the channel inside and benching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside, R.C.C. cover slab in c.c. (1:11/2:3) using 12 mm size h.g. chips with R.C.C. m.h. cove including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. Inspection chamber |
| 105 | Supplying all materials, labour, T&P and laying 110 mm dia SWR pipes of the following O.D conforming to IS No. 13592 and aligning to requisite gradient inside the trench encasing all round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.- 110 mm dia SWR Pipe Sewerage line with all round encasing (conforming to IS No. 13592) |
| 106 | Supplying all materials, labour T&P and constructing soak way pit of the following sizes with dry brick walling form bottom up to invert of inlet pipe and 1st class Fly Ash brickwork in c.m(1:6) for the remaining height at top, 12 mm thick c.p(1:4) inside and outside over masonary brickwork gravel packing in the rear of well steining R.C.C. cover slab in c.c (1:11/2:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in stoney earth and refilling the cavity around the pit & painting the iron works, watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 1.20mtrs.dia x 2.0mtr.deep soak way pit |
| 107 | Supplying all materials, labour, T&P and cleaning and washing the choaked soakway pit of the following size with removal of sludges and debries from pit and cleaning of khoa & filling 50% new khoa etc conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. |
| 108 | Supplying all materials, labour, T &P and providing C.C (1:1.5 :3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C.[RCC Slab-1.20 x2.00 mtr Soak Pit] |
| 109 | Supplying all materials, labour, T&P and constructing RCC Recharge Pit of the following sizes with precast R.C.C rings joined loose gravel backing in the rear of well steining, precast R.C.C cover slab in c.c.(1:1.5:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, watering ,curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 1.20 mtr dia x 2.10 mtr. deep RCC Ring Pit |
| 110 | Supplying all materials, labour T&P and filling in F&P with Coarse sand including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 111 | Supplying all materials, labour T&P and filling in F&P with 6mm thick metal including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 112 | Supplying all materials, labour T&P and filling in F&P with 20-25mm thick metal including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 113 | Supplying all materials, labour T&P and filling in F&P with 25-40mm thick metal including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 114 | Supplying all materials, labour, T&P and fitting water container -2 nos (25 lit & 5 Lit BPA Free) for Liquid Waste treatment including providing 20mm dia & 25mm dia & 32mm dia PVC PIipe, fixing 20mm dia & 32mm dia U-PVC Ball valve including hoisting and placing in position including supplyh of Iron bracket with jally with painting the iron works,including cost of all materials, conveyance & taxes to work site involves managing and treating liquid waste generated from various medical procedures, patient care and labortaory testing to prevent contamination and to ensure safe disposal fixing etc. all complete as per direction of EIC. |
| 115 | Supplying all materials, labour, T&P and constructing soak way pit of the following sizes with precast R.C.C rings joined loose gravel backing in the rear of well steining, precast R.C.C cover slab in c.c.(1:1.5:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, watering ,curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 0.90 mtr dia x 2.00 mtr. deep RCC Ring Pit |
| 116 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of FG Over Head Tank) -- 1000 Ltrs. Capacity F.G.Over Head Tank. (on roof of 1st floor) |
| 117 | Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class Fly Ash brick work in c.m, (1:6) of 0.46m. height in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size Fly Ash bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.60mtr xl.60mtr x0.l0mtr thick, R.C.C. beam of size 0.25m x 0.30m and 2.60m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C -- For 1000 Ltr. Capacity Over Head Tank(on roof of 1st floor) |
| 118 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C - 20 mm dia PVC (ASTM) Pipe [Internal] |
| 119 | 25 mm dia PVC (ASTM) Pipe [Internal] |
| 120 | 25 mm dia PVC (ASTM) Pipe) [External] |
| 121 | 32 mm dia PVC (ASTM) Pipe) [External] |
| 122 | 25 mm dia HDPE Pipe [External Including E/W] |
| 123 | Supplying all materials,labourT&P and cutting holes through brick/stone masonary walls for taking water supply pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge |
| 124 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. . |
| 125 | Supplying ail materials,labour,T&P and fitting & fixing brass/C.P fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H specification and direction of E.I.C.- 15mm dia. C.P Bibcock (Short body) [Jaquar] |
| 126 | 15mm dia. C.P Bibcock (long body) [Jaquar] |
| 127 | 20mm dia.C.P Conceal stopcock [Jaquar] |
| 128 | 15mm dia.C.P Angle stopcock[Jaquar] |
| 129 | 15mm dia C.P Pillar cock Swan Neck[Jaquar] |
| 130 | 15mm dia C.P Pillar cock [Jaquar] |
| 131 | 15mm CP Two Way Bib cock[[Jaquar] |
| 132 | 15mm dia C.P. Health Faucet [Jaquar] |
| 133 | 15mm dia C.P. Elbow Action Bib Cock [Jaquar] |
| 134 | 15mm dia C.P Extension piece. |
| 135 | 25mm dia. PVC Ball valve [Metal Ball] |
| 136 | 32mm dia. PVC Ball valve [Metal Ball] |
| 137 | 15mm dia PVC Connection Pipe |
| 138 | 32mm dia. PVC Waste Pipe |
| 139 | 32mm dia. C.P. Waste |
| 140 | Supplying all materials, labour, T&P and fitting and fixing C.P. shower with 15 mm or 20 mm inlet with C. P. shower arm including polishing all complete as per P.H. specification and direction of E.I.C. |
| 141 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Cerra/ Parry ware/ Hindware) |
| 142 | Supplying all materials labour T&P and providing, fitting and fixing Aquaguard Thermapure 120 PSS RO ACH,Approximate External dimention 750x690x1420 (WxDxH),Opreating Power Supply-230V AC (50 Hz), pwer Rating (Max) Total-2750(+/-10%, Heating Coil Wattage-2000 W,Water StorageTank Capacity Total-120 ltr, Cold Water-80 ltr, Hot Water-20 liter, Ambient Water-20 ltr. Cooling Capacity -60 LPH, Water outlet Temperature at rated condition,Cold Water -15 Deg C+/-1, Hot Water -50 Deg C+/-1, Refrigerant HFC R 134-a, Thernal insulation PUF, No. of Faucet-03 ( Hot-1, Cold-1 & Ambient-1) No of stages for filter cum purifier-07, permeate (Purified water) production capacity -50LPH, % of purified water recovery -50%, %Rejection of TDS-90% Approx storage tank & Drain Tray material -SS 304, Outer body material-front SS 304, Type of product product construction-concealed, Type of Installation-Indoor, Weight-95KG etc all complete as per direction of Engineer in Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender