Tender For Repair And Renovation To Sergarh Phc Building Under Remuna Block For Ama Hospital Phase Ii In The District Of Balasore For The Year 2026-27
Tender Value
60.86 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
11 days left
EMD
60868
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation To Sergarh Phc Building Under Remuna Block For Ama Hospital Phase Ii In The District Of Balasore For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | A/R-P 214/Item No.3:Dismantling brickwork, stone masonry In Cement mortar under 3meter height including stacking the useful material for reuse and removing the debris within 50 meter lead. |
| 2 | A/R-P 219/Item No.18:Dismantling and removing doors, windows, and ventilaters after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50 meter lead. |
| 3 | Single under ream pile foundation with RCC-M20 using 12mm size black hard granite chips including cost of boring but excluding cost of MS/Tor steel and labour charges for cutting ,bendingand binding of steel .(5mtr) |
| 4 | A/R-P 1/item No.2(a)Earth work in hard soil in excavation of foundation trenches within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bedincluding all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 5 | Supplying, filling in foundation & plinth with sand In layers including watering and ramming with cost conveyance, royalties, taxes of all materials and labour with T&P required for the work etc. complete |
| 6 | Supply filling in foundation & Plinth with sand in layers including Watering and ramming with cost Conveyence ,royalities,taxes of all materials and labour with T&P etc complete. |
| 7 | Cement concrete of proportion (1:3:6) In foundation and floors using 4cm size black, broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete In layers not exceeding 15cm(6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royalty taxes of all materials and labour with T&P required for the work etc. complete I as per direction of the Engineer-In-charge. |
| 8 | Cement concrete (1:2:4) using 12mm size BHGCB chips of approved quality from approved quarry including cost of all labour , materials T&P etc completew as per direction of the Engineer in charges. |
| 9 | Brick work with Fly Ash Bricks having crushing strength 75kg/cm2 In Plinth level brick work with cm(1:6) |
| 10 | Fly Ash brick masonry of size 25 cm.x 12 cm.x 6 cm. having crushing strength not less than 75 Kg. Per Scr. Cm. In cement mortar of mix (1:6) with approved grade cement & screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in charge |
| 11 | Brick work with fly ash brick of size 25cm*12cm*8cm having crossing strength not lesss than 75kg /cm2 with dimensional CM(1:4) in foundation and plinth etc complete. |
| 12 | Brick work with fly ash brick of size 25cm*12cm*8cm having crossing strength not lesss than 75kg /cm2 with dimensional CM(1:4) in foundation and plinth etc complete. |
| 13 | RCC work of M-25 grade with 20mm & down grade size black hard granite (Crusher broken) chips including hoisting and laying Data for 15Cum |
| 14 | RCC work of M-20 grade with 20mm & down-grade size black hard granite(crusher broken) chips including hoisting & laying (Data for 15 cum. Column base |
| 15 | Pile Cap |
| 16 | Grade Beam |
| 17 | Lintel |
| 18 | Chajja |
| 19 | Column and Beam |
| 20 | Roof slab |
| 21 | Supplying fitting and placing HYSD bar reinforcement for RCC work complete as per drawing and technical specification etc complete. |
| 22 | 12mm thick Cement Plaster (1:6) for brickwork Including curing etc. complete. |
| 23 | 12 mm thick cement plaster (1:4) over brick work with cement punning for skarting including curing etc complete. |
| 24 | 16mm thick Cement Plaster (1:6) for brickwork Including curing etc. complete. |
| 25 | A/R-P 90/item No.17:Fixing of ceramic wall tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles or stones. |
| 26 | Providing fitting and fixing wall tiles in dadoos and skirting including cost of all material , labour T&P etc complete. |
| 27 | A/R-P 109/item No.26:6mm thick Cement plaster (1:4) finished smooth per 1 Sqm. including curing etc. complete.(G/F) |
| 28 | Providing fitting and vetrified tiles in floors including cost of all material labour T&P etc.complete |
| 29 | :Fixing of black granite tiles(above .1 upto .4mm) in floors treads or stepps and landing on 25mm thick bed of Cement mortar 1:1 ( 1 Cement : 1 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles or stones. |
| 30 | Fixing of ceramic floor tiles of Size 30cmx30cm / 40cmx40cm special plane / printed series of premium grade having thickness 7mm to 8mm confirming to IS 13753 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work) |
| 31 | Wall Painting Two Coats With hundred PERCENT Acrylic Emulsion paint first Quality Weather seal coat exterior grade of approved makr to make an event finished surface over a coat primer with water bond cement primer in all heights with all Scaffodle and staging charges including cost conveyance taxes of all materials cost of all labours T and P sundries etc.As Required for the work complete. |
| 32 | Wall painting two coats with approved colour of weather seal coat out side surface over a coat of wall primer of approved shade on new work to give an ever shade including cost of materials, labour T&P sunrise . |
| 33 | A/R-P 99/item No.20:Wall painting 2-coats with plastic emulsion paint of approved shade on new work to give an even shade . |
| 34 | Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,T&P,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge. |
| 35 | Supplying fitting fixing M.S door in windows and doors of approved design etc complete. |
| 36 | Dressed seasoned Non sal Wood work framed and fixed in trusses , puttys, door, window , ventilators and beams. |
| 37 | Providing 32mm thick factory made one side laminated flush door shutter with as per IS-2002/92 with Splid core Core BWR Block Board from Seaasored and treated 2nd class hard wood , battlen ,binded with phenole formal delite synthetic resigne pressed in all respect as per direction of engineeer in charge |
| 38 | Supllying Fitting and Fixing of two track UPVC Sliding Window of approve make with 6 mm Glass of approved quality complete with frame,shutters and all fittings and fixtures.As per SOR page 235. |
| 39 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia o 2mm thick circular pipe with balustrade size 32mm*32mm*2mm @ 0.90 mtr C/C and stainless square pipe of size Specification etc all completed. |
| 40 | Finishing wall surface With ACRYLIC wall putty (Water based) over a coat of wall primer of approved make and finished smooth and even surfaces to receive painting including cost of all materials ,labour T&P etc. |
| 41 | Wall Painting two Coats With Distemper of approved shade a new work over 1 coats primer to give an even shade including all complete. |
| 42 | Painting two coats over a coat of priming on new wood and iron work etc complete. |
| 43 | Painting two coats to new Iron work with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 44 | Providing fitting and fixing of false ceilling with Aluminum anodised T section No 3215 with 2'-0\\" center to centre, L section No 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0\\" x 2'-0\\" using 12mm thick prelaminated particle Board suspended from ceilling etc complete as directed by the Engineer-in-charge |
| 45 | S/R-2012/Other Building Item No.6:- Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick prelaminated board (Nova pan make) and jointing angle No 1855 etc.complete as directed by the Engineer-in-charge |
| 46 | Providing fitting and fixing G.I Grill gate with ornamental design made out of G.I angle with flat with cost of all materials etc. |
| 47 | Providing and laying 80 mm thick factory made cement concrete inter locking paver block. |
| 48 | :Labour fixing G.C.I. Sheet of 0.4 mm thick in roof drilling hole in wind ties including fixing of ridges valleys,windties etc. With cost of G.C.I sheet,excluding cost of fittings. |
| 49 | Supplying and Fixing of M.S. Pipe, Angle etc including cost,conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge |
| 50 | Providing supplying and fixing steel frame 50 mm dia post with( Message uniform Branding) etc complete with all material & all labour T&P etc as per specification approved by the department & as per direction of EIC |
| 51 | Supplying and Fixing Stainless steel letter including the cost of all material and labour & Fixing etc all complete as per direction of EIC Letter |
| 52 | Signage |
| 53 | Letter |
| 54 | PH WORK Supplying all materials, labour T&P and dismantling the damaged squatting type water closet and urinal plates etc. and mending good the damages to the floor and removing the debris at a safe distance as per direction of E.I.C. |
| 55 | Supplying all materials, labour T&P and dismantling the damaged EWC and mending good the damages to the floor and removing the debris at a safe distance as per direction of E.I.C. |
| 56 | Supplying all labour, T&P and dismantling and removing old tile flooring including removing the base course and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 57 | Supplying all labour, T&P, and dismantling and removing old tile cladding from wall including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m intial lead. |
| 58 | Supplying all materials, labour T&P and fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specification and direction of EIC- Ground Floor |
| 59 | Supplying all materials, labour T&P and fixing porcelain glazed tiles in dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge.[Gr. Floor] |
| 60 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 61 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 62 | Supplying all materials, labour T&P and fixing Water closet, (Orissa pattern squating pan) duly embeded in C.C. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C.- 580mm Orissa pan (Cerra/Parry ware/ Hindware) |
| 63 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral S or P trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C-- E.W.C. with S trap Plain(Cerra/ Parry ware/ Hindware) |
| 64 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Cerra/Parry ware/ Hindware) |
| 65 | Supplying all materials labour Tand P and fitting and fixing SWR ventilating pipes and fittings of the following O.D conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.- 110 mm dia PVCSWR Pipes |
| 66 | 110 mm dia PVC SWR P Trap |
| 67 | 110 mm dia PVC SWR Door Tee |
| 68 | 110 mm dia PVC SWR Door CrossTee |
| 69 | 110 mm dia PVC SWR Door Bend |
| 70 | 110 mm dia PVC SWR Plain Bend |
| 71 | 110 mm dia PVC SWR Offset |
| 72 | 110 mm dia PVC SWR Cowl |
| 73 | 125 mm dia C.P.grating |
| 74 | 75 mm dia SWR Pipes |
| 75 | 75 mm dia PVC SWR Plain bend |
| 76 | 75 mm dia PVC SWR Door bend |
| 77 | 110 mm dia PVC SWR Nahani trap without Jally |
| 78 | Supplying all materials, labour T&P and cutting holes through brick/stone masonary walls for taking PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. - 250 mm to 375mm thick wall |
| 79 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Cera/ Parry ware/ Hindware) |
| 80 | 32mm Dia Bottle Trap -(Cerra-F-8060301) |
| 81 | Wall mounted 600 mm long Grab Bar (Cerra-Cat No-82210106) |
| 82 | Wall mounted hinged hand rail 750x100 mm long(Cerra-Cat No-82210108) |
| 83 | Supplying all materials, labour T&P and fixing padestrial for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Parrywear/Cera/Hindware) |
| 84 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.-- 600mm x 450mm B.E. Mirror (fixed type) |
| 85 | Supplying all materials, labour T&P and fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C. -- 20 mm x 600 mm long C.P Towel rail |
| 86 | C.P. Towel Ring (St.) |
| 87 | Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of E.I.C C.P.Soap Holder. |
| 88 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C -- 450x125mm size Plate Acrylic Shelf |
| 89 | Supplying all labour, T&P, materials & fixing wash Labortary sink with M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C. -- 600mm x 450mm x 200mm Stainless Steel sink.[Including C.P. Waste & PVC Waste Pipe] |
| 90 | Supplying all materials, labour T&P and fixing bowl pattern urinal including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C.-- Flat back lipped wall urinal (standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe[CerraParrywear/Hindware] |
| 91 | Supplying all materials, labour, T&P and cleaning the liquid sludge etc. all complete and disposing them outside as per direction of E.I.C-liquid Sludge |
| 92 | Earth work in all kinds of soil in excavation of foundation trenches within 50 m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding o.30 in depth and as per direction of E.I.C .-- Initial lift up to 1.50m |
| 93 | 2nd depth upt 3.00 mtr |
| 94 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 95 | Supplying all materials, labour T&P and providing c.c (1:3:6) using 4cm h.g. metal including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 96 | Supplying all materials, labour T&P and providing c.c (1:1.5:3) using 12 mm h.g. chips including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 97 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% in including watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. - In Foundation & Plinth in CM (1:4) |
| 98 | Supplying all materials, labour, T &P and providing C.C (1:1.5 :3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C. |
| 99 | Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite etc. complete as per directio n of E.I.C. |
| 100 | Supplying all materials, labour, T&P and providing rigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per direction of E..I.C.-- R.C.C.Slab |
| 101 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.-- 12mm thick C.P with C.M. (1:4) |
| 102 | 20mm thick C.P with C.M. (1:4) |
| 103 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 104 | Supplying all materials, labour, T&P and providing cement flush pointing to brick masonary (1:3) including watering, curing conveyance of all materials to work site, payment of royality, taxes etc. all complete as per direction of E.I.C. |
| 105 | Supplying all labour, materials T&P and fixing of R.C.C. Baffle wall pre-cast with C.C. (1:1.5:3) using 12 mm b.h.g. chips and fitted to septic tank as per P.H. Specification and direction of E.I.C. |
| 106 | Supply all materials ,labour,T&P providing fitting and fixing PVC. Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size h.g. chips all complete including watering curring,conveyance of all \\"materials to work site .payment of royality .taxes its all complete as per specification and direction of E.I.C.-11OmmXI 10mm X110mm PVC Tee |
| 107 | Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips and placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C |
| 108 | Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 109 | Filling F&P with excavated materials, including watering and ramming as per direction of E.I.C. |
| 110 | Supplying all materials, labour T&P and costructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1 1.5:3) using 12 mm size h.g. chips foundation concrete (1:3:6) using 40 mm size h.g. metal on bed and arround trap Fly Ash brick work in c.m. (1:6) in F&P and inside 12mm thick c.p (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C. Inside size 250mm x 250mm gully trap Chamber |
| 111 | Supplying all materials, labour T&P and constructing Inspection chamber of the following sizes with c.c (1:3:6) using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in c.m (1:6), moulding and shaping the channel inside and benching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab in c.c. (1:11/2:3) using 12 mm size h.g. chips with R.C.C. m.h. cover, e.w. in excavation in all kinds of soil and refilling the cavity arround the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. Inside size 760mm x 760mm x 460mm I.C. |
| 112 | Supplying all materials, labour T&P and Repairing of damaged Inspection Chamber /with moulding and shaping the channel inside and benching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside, including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. Inspection chamber |
| 113 | Supplying all materials, labour, T&P and laying 110 mm dia SWR pipes of the following O.D conforming to IS No. 13592 and aligning to requisite gradient inside the trench encasing all round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.- 110 mm dia SWR Pipe Sewerage line with all round encasing (conforming to IS No. 13592) |
| 114 | Supplying all materials, labour T&P and constructing soak way pit of the following sizes with dry brick walling form bottom up to invert of inlet pipe and 1st class Fly Ash brickwork in c.m(1:6) for the remaining height at top, 12 mm thick c.p(1:4) inside and outside over masonary brickwork gravel packing in the rear of well steining R.C.C. cover slab in c.c (1:11/2:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in stoney earth and refilling the cavity around the pit & painting the iron works, watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 1.20mtrs.dia x 2.0mtr.deep soak way pit |
| 115 | Supplying all materials, labour, T&P and fitting water container -2 nos (25 lit & 5 Lit BPA Free) for Liquid Waste treatment including providing 20mm dia & 25mm dia & 32mm dia PVC PIipe, fixing 20mm dia & 32mm dia U-PVC Ball valve including hoisting and placing in position including supplyh of Iron bracket with jally with painting the iron works,including cost of all materials, conveyance & taxes to work site involves managing and treating liquid waste generated from various medical procedures, patient care and labortaory testing to prevent contamination and to ensure safe disposal fixing etc. all complete as per direction of EIC. |
| 116 | Supplying all materials, labour, T&P and constructing soak way pit of the following sizes with precast R.C.C rings joined loose gravel backing in the rear of well steining, precast R.C.C cover slab in c.c.(1:1.5:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, watering ,curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 0.90 mtr dia x 2.00 mtr. deep RCC Ring Pit |
| 117 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of FG Over Head Tank) -- 1000 Ltrs. Capacity F.G.Over Head Tank. (on roof of 1st floor) |
| 118 | Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class Fly Ash brick work in c.m, (1:6) of 0.46m. height in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size Fly Ash bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.60mtr xl.60mtr x0.l0mtr thick, R.C.C. beam of size 0.25m x 0.30m and 2.60m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C -- For 1000 Ltr. Capacity Over Head Tank(on roof of 1st floor) |
| 119 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C - 20 mm dia PVC (ASTM) Pipe [Internal] |
| 120 | 25 mm dia PVC (ASTM) Pipe [Internal] |
| 121 | 25 mm dia PVC (ASTM) Pipe) [External] |
| 122 | 32 mm dia PVC (ASTM) Pipe) [External] |
| 123 | 25 mm dia HDPE Pipe [External Including E/W] |
| 124 | Supplying all materials,labourT&P and cutting holes through brick/stone masonary walls for taking water supply pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge |
| 125 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. . |
| 126 | Supplying ail materials,labour,T&P and fitting & fixing brass/C.P fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H specification and direction of E.I.C.- 15mm dia. C.P Bibcock (Short body) [Plaza/ Amber Deluxe] |
| 127 | 15mm dia. C.P Bibcock (long body) [Plaza/ Amber Deluxe] |
| 128 | 20mm dia.C.P Conceal stopcock [Plaza/ Amber Deluxe] |
| 129 | 15mm dia.C.P Angle stopcock[[Plaza/ Amber Deluxe] |
| 130 | 15mm dia C.P Pillar cock long Neck[Plaza/ Amber Deluxe] |
| 131 | 15mm CP Two Way Bib cock[[Plaza/ Amber Deluxe] |
| 132 | 15mm dia C.P. Health Faucet[Plaza/ Amber Deluxe] |
| 133 | 15mm dia C.P. Elbow Action Bib Cock[Plaza/ Amber Deluxe] |
| 134 | 15mm dia C.P Extension piece. |
| 135 | 25mm dia. PVC Ball valve [Metal Ball] |
| 136 | 32mm dia. PVC Ball valve [Metal Ball] |
| 137 | 15mm dia PVC Connection Pipe |
| 138 | 32mm dia. PVC Waste Pipe |
| 139 | 32mm dia. C.P. Waste |
| 140 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Cerra/ Parry ware/ Hindware) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender