Tender For Construction Of E-Library At Ambedkar Bhawan At Idsmt Scheme In Municipal Area Tonk
Tender Value
14.40 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
10 days left
EMD
28800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tonk → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of E-Library At Ambedkar Bhawan At Idsmt Scheme In Municipal Area Tonk
BOQ
| Sl. No. | Item Description |
| 1 | PART 'A' : BSR Item |
| 2 | Supply, Installation, Testing and Comissioning of IS:1475 marked self contained drinking water cooler with hermetically sealed compressor,non CFC refrigerent suitable for operation on 230V/1pH/50Hz AC supply,Full stainless steel (SS304) body (0.8 mm thick) and tank (0.5 mm thick) , stainless steel water tray,minimum two nos Brass Chrome plated faucets and suitable drainage system complete in all respect with required height MS fabricated and Painted Angle iron frame (Cost of frame to be paid Extra) complete in all respect of the following capacity. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work, refer Annexure \\"A\\" attached with this BSR cooling capacity 40 Ltr./Hr. and storage capacity 80 Ltrs |
| 3 | Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels etc for various partition frame as per Design & Instructions & Complete in all aspects . including all materials labour, finishing etc complete |
| 4 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 1200 mm Sweep BEE 2 Star rated (service value >=4.5 to < 5 ) |
| 5 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick |
| 6 | Supply, Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 2.0 TR ISEER not less then 4.6 |
| 7 | Supply & Fixing of CO2 type Fire Extinguisher conforming to IS:15683:2018, charged with CO2 gas (purity 99.7% conforming to IS 15222), Powder coated Internal & External Surface Manganese steel ISI marked as per IS 7285 cylinder body , Wheel type Forged brass release valve ISI Marked as per IS 3224 with Inbuilt safety release device ((Fusible plug and Rupture Disc Type), 1.0 Mtr. Metal wire braided hose having minimum bursting pressure of 140 Kgf/cm2, Horn with metallic thread connection, QR code for Product Traceability, including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR Capacity 4.5 Kg. |
| 8 | Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC type Fire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 4 kg |
| 9 | Part \\"C\\" : NON BSR ITEMS |
| 10 | Supply and fixing Signature Chair with arm resin moulded chair High gloss lacquered cushion seat and back soft feel fabric Erogonomic chair with optimum comfort As per Engineer Chair |
| 11 | M.S sheet conforming to commercial quality CR- 1,Grade 340 of IS 513:2008, Number of Doors (NOS)=4, Height of Steel Bookcase in mm (± 10 mm) 1680 mm,Width of Steel Bookcase in mm (±5 mm)=910 mm, Depth of Steel Bookcase in mm (± 3 mm)=400 mm, Stiffened Pedestal height in mm (±2 mm)=125, Sheet Thickness of Shelves=1mm, Sheet Thickness of Pedestal in mm=0.8mm, Sheet Thickness of door in mm=1mm, Thickness of Transparent glass in Shutters in mm=4.0, Type of lock= three way bolting device controlled by 6 lever lock, Paint= Powder Coating. NOTE: 1 Year OEM Warranty for the Above Product_on Site. |
| 12 | Providing and placing medium Back Chair Non-Revolving and Non-Tilting with Armrest, Fixed PP Arm, Gas Lift, Nylon Base, Seat & Back Mesh Tapestry, seat material is Moulded Plywood, Density of Polyurethane foam used in seat (±2 Kg/Cub Meter) is 32 mm, GSM of seat cover (± 3 GSM) is 250 GSM. Seat Depth (± 5 mm) is 480 mm, Seat Width is (± 5 mm) 600 mm, Seat height from floor surface (± 5 mm)475 mm, Backrest width (± 5 mm) 470 mm, Backrest height from seat (± 5 mm) is 540 mm.The frame is cantiliver type and the CRCA round pipe is 25 mm and equipped with high quality rubber shoes. Overall finish as per the picture as shown in catalog. NOTE: 1 Year OEM Warranty for the Above Product_on Site. |
| 13 | Providing and placing the Multi-function tilt mechanism chair, with Upright locking system, Nylon base pedestal, Polypropylene armrest, seat material is Pressed and moulded with PU foam, Backrest is made of one piece injection moulded frame, Backrest and seat upholstered with Mesh Fabric, GSM/Thickness of fabric ±5%(Gram/Square meter) is 220 gram. Overall width (±10 mm) is 550 mm, Backrest Height ±15 mm is 430 mm, Backrest Width ±10 mm is 500 mm, Seat Height ±10 mm is 440 mm, Seat Width ±10 mm is , 460 mm, Seat Depth ±10 mm is 430 mm, Thickness of MS Plate Joining the under structure with Seat is 0.3 mm, Thickness of Plywood used in Seat ±1(mm) is 15 mm. Overall finish as per the picture as shown in catalog.NOTE: 1 Year OEM Warranty for the Above Product_on Site. |
| 14 | Technical Specifications 1)AMD Ryzen : 5 or i5 3250U (2.6 GHz base clock, up to 3.5 GHz max boost clock, 4 MB L3 cache, 2 cores) 2)Memory: 8 GB or 16 GB DDR4/DDR 5 -2400 MHz RAM (1 x 8 GB) 3)Storage: 1 TB 7200 rpm SATA HDDNOTE,SDD NOTE : 1 Year OEM Warranty for ALL IN ON PS_on Site. |
| 15 | Technical Specifications 1) Printer- print speed up to 20ppm (A4),print resolution up to 1200X1200 dpi,Scanner inbuild,Mobile printing, wi fi direct, dimension WDH 406X359.6X253mm 2 ) UPS- 360 W( 600VA),Ideal power backup, NOTE : 1 Year OEM Warranty for ALL IN ON PS_on Site. |
| 16 | Supply and fixing Cant Grand water purifier (RO) 25 ltr capacity ISI Marked as per Engineer incharge |
| 17 | PVC Metting for floor 15mm thick for Room |
| 18 | Make Different type of visual art work (nife,mural,lolaz,realisticwork,fine art,teditionar,madane,and stock work) design as per direction of EIC with all lead and lift |
| 19 | Supplying and fixing of Battery combo with inverter with trolley power sine Wave 1100 (900VA/12V) 200 MAh with all 36 Month Battery Warrenty |
| 20 | Providing and placing office table with drawer unit. The buildup of the main table is free standing structure strength up with the help of minifix dowels and pins. The complete table made of high quality MDF board with approved laminate and finish as per approved shade. The table top would be 1200mm(±10) long made with 25 mm MDF board and 600mm (±10) broad with two side gable ends with height of 750mm(±10) and width of 600mm(±10) made up with 18 mm MDF board. The 18 mm thick modesty of the table is giving more strength and look to the table. All the sharp edges of the table top and gable ends are lipped with 2mm thick edge binding tapes for the smooth finish. The table is provided with attached one side pedestal. There is 3 no of drawers facility on single side attached pedestal.Drawer pedestal is provided with central locking mechanism that allow all the drawers synchronized locked with one single key. Each drawer is equiped with roller channel for smooth to&fro functioning. length of each drawer is 400mm(±10) and depth of 450mm(±10) and overall height is 675mm(±10) of the pdestal. All the drawers and storage is eqiped with SS handles to operate. All Wooden Panels Prime Quality Board With ISI Marked. NOTE : 1 Year OEM Warranty for the Above Product_on Site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender