Tender For Supply Installation Testing and Commissioning of 02 Nos. Of Cooling Tower Having Capacity (90Tr X 2) By Replacing One Old Cooling Tower At Animal House Plant, Pgimer, Chandigarh.
Tender Value
17.75 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
7 days left
EMD
35500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of 02 Nos. Of Cooling Tower Having Capacity (90Tr X 2) By Replacing One Old Cooling Tower At Animal House Plant, Pgimer, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, testing and commissioning of Induced Draught Counter Flow type Premium low noise , CTI Certified Cooling Towers as per CTI STD-201. The Cooling Tower’s make should be listed on Cooling Technology Institute (CTI) web link. The Cooling Tower shall be complete with FRP Casing, FRP Basin, FRP louvers, FRP access door along with FRP inspection window. All internal supports/ structure should be Pultruded FRP. Unpressurised - Gravity Flow, Header and branch arm type water distribution system. 0.2 mm thick PVC Film Fills, High Efficiency Drift Eliminators, Ladder and Axial Flow Propeller Type Fan. Motor should be Totally Enclosed Air Over (TEAO), Weather Proof type with IP-55 protection class & Premium Efficiency, suitable for 415±10% volts, 50 cycles, 3 phase power supply and related accessories. Motor RPM should not be more than 360 RPM with direct driven system. FRP Deflector Cowls with acoustic enclosure to further reduction of noise is mandatory. The Cooling Tower selection should be identifiable from the selection matrix of the manufacturer at the CTI website. |
| 2 | 90 TR Induced draft Cooling tower (HVAC Application) Water flow rate: in m3/hr. / USGPM/ LPM =280 USGPM Inlet (Hot) water Temp: in degree C / in degree F =97.5 F Outlet (Cold) water temp: in degree C / in degree F = 90F Wet bulb temp: in degree C / in degree F =83 F 2 |
| 3 | CONDENSER WATER PIPE |
| 4 | Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.butexcluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. |
| 5 | 200 mm Dia |
| 6 | 150 mm Dia |
| 7 | 100 mm Dia |
| 8 | 50 mm Dia |
| 9 | BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. |
| 10 | 200 mm dia |
| 11 | 150 mm dia |
| 12 | 100 mm dia |
| 13 | 50 mm dia |
| 14 | 40 mm dia |
| 15 | Providing & fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. |
| 16 | Providing & fixing in position the mercury in glass industrial type thermometers. |
| 17 | Civil Part |
| 18 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 19 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size |
| 20 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 21 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 23 | Foundations, footings, bases of columns, etc. for mass concrete |
| 24 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 25 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 26 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 27 | 32 mm dia nominal bore |
| 28 | 40 mm dia nominal bore |
| 29 | Applying priming coat: |
| 30 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 32 | Two or more coats on new work |
| 33 | Electrical Work |
| 34 | Supplying, installation, testing and commissioning of complete cable work using 1.1kV grade XLPE insulated PVC sheathed steel tape/wire armoured underground stranded cables as per IS-7098 (Part-1) of following sizes of electric supply from main panels in AC plant room, to various loads including interconnections (terminations) from starters to motors on suitable cable trays / existing uPVC pipe with supports as required including connections with end termination on both sides as per specifications and as required. |
| 35 | 3 core 10 sqm mm aluminium armoured cable. |
| 36 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. |
| 37 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 38 | Dismantling of cooling tower, pipes, valves, cable, cable tray, RCC, brick work etc, and lifting shifting of malba to nearest dumping site as required to complete satisfaction of E.I.C. |
| 39 | Buy back cost of all dismantled old material like cooling tower,motors,pipes,valves, ozone injection unit, assorted filters (206 nos) etc. complete in all respect.(Excluding copper cable, cable tray and other item if any as directed by E.I.C) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender