Tender For Repair To Compound Wall, Fencing And Hard Standing At Af Station Mullanpur Under Age (I) Highground Chandigarh
Tender Value
10 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Compound Wall, Fencing And Hard Standing At Af Station Mullanpur Under Age (I) Highground Chandigarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Corrigendum No 2 | Date | 24-Aug-2026 |
| 2 | 04-Aug-2026 | Corrigendum No 1 | BOQ | 17-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete,brick work, masonry etc, including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 2 | Dismantling of galvanised mild steel barbed wire/concertina coil of any description from fencing post (RCC or Steel), complete all as specified and directed. |
| 3 | Excavation in posts holes (or similar holes) each not exceeding 0.5 cubic metre, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 metre and making good surface in soft/loose soil, complete all as specified and directed. |
| 4 | Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed. |
| 5 | Material and Fix for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting e; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work complete all as specified and directed. |
| 6 | Supply only GI chain link fencing of any size or type, complete all as specified and directed . |
| 7 | Fixing only GI chain link fencing of any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed. |
| 8 | S&F of mild steel screw bolts (machine made) with hexagonal or Square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exceeding 5 cm but not exceeding 10 cm long, dia of shank 11 to 15 mm, complete all as specified and directed. |
| 9 | Material and Labour for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 10 | Supply and Fix Galvanised in two strands, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed. Note: Each line of wire to be measured |
| 11 | Fixing only and restraining, resecuring incl making good staples etc, (Galvanised two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing) to any type of standard rails including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed. Note: Each line of wire to be measured. Old wire retrieved under item 2.00 will be used under this item. |
| 12 | S&F of punched tape concertina coil 600mm dia made with high tensile strength galvanized mild steel wire 2.50mm dia (galvanised MS strip as per IS-1730) with angle iron 'Y' shaped and loop spacing 250+ 20mm coil length 9 metre and fixed in position complete all as specified and directed. Note: Mild Steel angle (Y shaped) shall be measured and paid separately. |
| 13 | Material and labour for taking down mild steel angle of any shape not exc 6mm thick as in posts or sturts in fencing and refixing in position in 1:2:4 concrete after necessary welding in repairs including cleaning and preparing the surface to be welded together, holding the member in true position while welding complete all as specified and as directedNote :- Necessary MS section such as angle , bars, flats etc if used will be measured and paid seperately |
| 14 | Material and labour for rolled miled steel section such as angel etc as in post and struts as in fencing including cutting tops to shape as directed , drilling holes ,notching for wire, including embeding in concrete and screw etc and similar works conforming to Fe290 grade E-165 complete all as specifed and as directed. |
| 15 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and removing rubbish outside defence land complete all as specified and directed. |
| 16 | Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish out MoD land complete all as specified and as directed. |
| 17 | Material and Labour for 75mm thick cement concrete type C-2, 1:3:6 (20mm graded stone aggregate) as in plinth protection/floors etc finished even and smooth (without using extra cement), complete all as specified and directed. |
| 18 | Material and Labour for cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in floor, foundations, filling and mass concrete, complete all as specified and directed. |
| 19 | Material and Labour for sand under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 20 | Material and Labour for machine pressed precast concrete interlocking paver block, 60mm thick, any shape and size, confirming to IS-15658-2006, M-35 Grade, with grey cement and no pigment complete all as specified and directed. |
| 21 | Material and Labour for PCC 1:2:4 Type B1 ( 20 mm graded stone aggregate) as in bed blocks, coping, etc complete all as specified and directed. |
| 22 | Material and Labour for coloured chequered cement concrete tiles 300x300x20mm thick,factory made ISI marked (IS 13801-1993), with grey cement and pigment., laid with neat cement slurry @ 3 kg/sqm over and including 15 mm thick screed bed of cement mortar (1:6) pointed in white cement with matching colour pigment, complete all as specified and directed. |
| 23 | Dismantling of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 24 | Material and labour for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed. |
| 25 | All as per above item No. 24 here-in-above but except bricks including cleaning mortar etc; complete all as specified and directed. |
| 26 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 27 | Material and Labour for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth without using extra cement, complete all as specified and directed. |
| 28 | Material and labour for preparing surfaces plastered or unplastered new surfaces with Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 29 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for, in ground floor, in isolated wall/windows, chajjas, balconies, RCC tank, precast cover slab etc and removing rubbish outside MoD land, complete all as specified and directed. |
| 30 | Material and labour for precast cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in louvres and jallies, 45 mm thick (measured solid) incl. all moulds set in CM 1:4 complete all as specified and as directed. |
| 31 | Material and Labour for providing precast cement concrete as in posts to RCC jali, with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match in cement cocncrete type B0, 1:2:4 and set in cement mortar 1:4 complete all as specified and directed. |
| 32 | Dismantling wrought or mild steel work of any description not otherwise provided for complete as specified and directed. |
| 33 | Supply and fix roof tusses, purlins, rails and fasterings and heavy bracket framing(beam, tee angle, channel of flat sections) of grade Fe-410 W(GdeE-250) including distance pieces, cleats etc complete all as specified and directed. |
| 34 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 35 | Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified by Engineer-in-Charge |
| 36 | Material and Labour for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed. |
| 37 | Material and Labour for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed. |
| 38 | Note: The total amount shall subject to adjustment of credit of Rs 6195.00 for old Materials as per Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender