Tender For Up Gradation Of Opd Building Sajnagarh Phc Building For The Yaer 2024 25
Tender Value
8.40 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
12 days left
EMD
8406
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up Gradation Of Opd Building Sajnagarh Phc Building For The Yaer 2024 25
BOQ
| Sl. No. | Item Description |
| 1 | 2.5cm thick grading concrete (1:2:2) on roof slab with 12mm & down graded size hard granite chips including cost of chicken wire mesh and water proofing compound on old work per Sqm |
| 2 | Earth work in ordinary soil in excavation of foundation trenches within 50 meter initial lead and 1.5mt. Intial lift including rough dressing and levelling the bed including all labour, T&P etc. complete as directed by the Engineer in Charge |
| 3 | Filling Foundation and Plinth with sand watered and rammed etc as pe the direction of the Engineer-in charge. |
| 4 | Cement concrete (1:3:6) with 4cm hard granite metal per 1 cum. |
| 5 | Cement concrete (1:2:4) with 12mm hard granite chips(Crusher broken) per 1 cum. |
| 6 | Fly Ash Brick (23x11x8cm) size having crushing strength not less than 75kg/ cm2 with cement mortar (1:6) in Superstructure per cum as directed by the Engineer-in-charge. |
| 7 | 12mm thick plaster (1:6) for brick work. |
| 8 | R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. |
| 9 | Straightening cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge. |
| 10 | Supplying, fitting & fixing of Granite tiles on floor including of all cost, conveyance etc all complete. |
| 11 | S/R-2012/Other Building Item No.6:- Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick prelaminated board (Nova pan make) and jointing angle No 1855 etc.complete as directed by the Engineer-in-charge |
| 12 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 Mtr. Center to Center and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials labour, T & P etc required for the work complete in all respect as directed by the Engineer in charge. |
| 13 | Finishing surface of walls with Acrylic putty (water based) of approved make & finished smooth & even surface to receive painting incluidng cost of materials taxes labour etc. |
| 14 | Wall painting 2-coats with plastic emulsion paint of approved shade on new work 1coats to give an even shade excluding cost of paint. |
| 15 | Painting two coats with weather seal paint over a coat of primer including cost, conveyance all materilas, labour and T & P etc complete. |
| 16 | Other building item no.1(b) of /S/R-2012:Fixing of vetrified tiles in floors of Size 600x600mm of approved make coformaing to I.S:13755 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work) |
| 17 | Fixing of ceramic floor tiles of Size 30cmx30cm / 40cmx40cm special plane / printed series of premium grade having thickness 7mm to 8mm confirming to IS 13753 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work) |
| 18 | A/R-P 90/item No.17:Fixing of ceramic wall tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles or stones. |
| 19 | Painting two coats with approved paint on wood work & Iron work. (Old & New) |
| 20 | Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge. |
| 21 | Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,T&P,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge excluding cost of laminated board . |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and faceveneers on both faces of shutters. |
| 23 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.AS per SOR page 235. |
| 24 | Supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section No.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P etc complete as per direction of Enginner -in charge. |
| 25 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size design & shape,laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand,filling the joints with fine sand etc complete as per direction of Engineer in charge.( Data for 10 sqm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender