Tender For Smart Periodical Services To Zone A At Lgj Mil Stn Under Ge Lalgarh Jattan
Tender Value
30 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Periodical Services To Zone A At Lgj Mil Stn Under Ge Lalgarh Jattan
BOQ
| Sl. No. | Item Description |
| 1 | M & L for taking down cement plaster on bricks or stone walls etc and including raking out joints, hacking for key scrubbing down with water etc complete all as specified & directed by Engr-in-charge. |
| 2 | M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement all as sepecified and directed. |
| 3 | M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 on wall finished even and smooth without using extra cement all as sepecified and directed. |
| 4 | M&L for rendering, 5 mm thick on brick work or concrete surfaces in cement mortar 1:4 on ceiling finished even and smooth without using extra cement all as sepecified and directed. |
| 5 | M & L for applying white cement based polymeric putty conforming to IS 17545: 2021, average thickness 2 mm on new plastered surfaces, mixed with water in mechanical mixer, applying in one or more coats not exceeding the recommended thickness and keeping the gap/ the interval in subsequent coats, applying on the moistened wall surface uniformly in an upward direction with the help of a putty blade complete as per the manufacturer’s instructions and complete all as specified and as directed. |
| 6 | M & L for complete removal of existing finish on surface wall including chajjas, facias etc by mechanical equipments like electric wall sander, water jet machine, completely removed from the existing treatment and preparing and applying white cement based polymeric putty conforming to IS 17545: 2021, average thickness 2 mm , mixed with water in mechanical mixer, applying in one or more coats not exceeding the recommended thickness and keeping the gap/ the interval in subsequent coats, applying on the moistened wall surface uniformly in an upward direction with the help of a putty blade complete as per the manufacturer’s instructions and complete all as specified and as directed. |
| 7 | M & L for preparing plaster surfaces of walls treated with any type of putty and applying two or more coats of 1st quality Internal Acrylic Emulsion Paint (ready mixed) having VOC content less than 50 gms/litre as per IS 101 (Part 2/Sec 2), matt finish, medium washability, of approved shade, over a coat of primer as per the manufacturer’s instructions, applying using roller, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 8 | M & L for preparing plastered surfaces of wall treated with any type of putty including chajjas, facias etc. and applying two or more coats of 100% Premium exterior acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete as per the manufacturer’s instructions, applying using roller, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note: - The paint shall be as per Apex Ultima of Asian Paints or equivalent of Make mentioned in tender |
| 9 | M & L for preparing plaster surfaces of walls and applying 1st quality Internal Acrylic Emulsion Paint (ready mixed) in single coat only , VOC less than 50 gms/ litre as per IS 101 (Part 2/Sec 2), matt finish, medium washability, of approved shade, as per the manufacturer’s instructions, applying using roller, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 10 | M & L for preparing plaster surfaces on ceiling and applying acrylic distemper in single coat only , VOC less than 50 gms/ litre as per IS 101 (Part 2/Sec 2), matt finish, medium washability, of approved shade, as per the manufacturer’s instructions, applying using roller, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note: - The paint shall be as per Tractor Uno Acrylic Distemper of Asian Paints or equivalent of Make mentioned in tender |
| 11 | M & L for preparing plastered surfaces of wall including chajjas, facias etc. and applying premium acrylic smooth exterior paint in single coat only (100% acrylic) with VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over, of approved shade as per the manufacturer’s instructions, applying using roller, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note: - The paint shall be as per Apex Ultima of Asian Paints or equivalent of Make mentioned in tender |
| 12 | M&L for 3 coats of white wash on old/newly plastered surfaces incl preparation etc. complete on ceiling complete all as specified & directed by Engr-in-charge. |
| 13 | M&L for 3 coats of white wash on old/newly plastered surfaces incl preparation etc. complete on wall complete all as specified & directed by Engr-in-charge. |
| 14 | S&F for preparation of old steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed. |
| 15 | S&F for preparation of old wooden surfacs of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 16 | M & L for writing letters or figures in (Roman/ Indic Script) (Bold/ Italic/ Capital/ Smaller type) not exceeding 30 cm in height with synthetic enamel paint complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 17 | M & L for writing letters or figures in (Roman/ Indic Script) (Bold/ Italic/ Capital/ Smaller type) not exceeding 30 cm in height with synthetic enamel paint complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender