Tender For Providing And Installing 6 Community Reverse Osmosis (Ro) Water Systems At Various Places In Karaikal District
Tender Value
90.70 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
10 days left
EMD
1.81 Lakhs
Bank guarantee accepted
Document Fee
1050
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karaikal → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installing 6 Community Reverse Osmosis (Ro) Water Systems At Various Places In Karaikal District
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as per direction of Engineer-in-charge , within a lead of 50m - all kinds of soil |
| 2 | Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:5:10 (1 cement : 5 fine aggregate : 10 graded stone aggregate 40mm nominal size) |
| 4 | Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 fine aggregate) |
| 5 | Cement concrete flooring 1:2:4 (1 cement: 2 fine aggregate: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate |
| 6 | 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine aggregate) |
| 7 | Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) , of 1st quality conforming to IS :15622, of approved make , in all colours, shades, except white , ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 fine aggregate), jointing with grey cement slurry @ 3.3 kg /sqm including pointing the joints with white cement and matching pigments etc., complete |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 fine aggregate) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 9 | Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works |
| 10 | Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work |
| 11 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.- in cement mortar |
| 12 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size & design / shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand , filling the joints with fine aggregate etc. all complete as per the direction of Engineer-in-charge |
| 13 | Providing and fixing of RPUF insulated panels of atleast 60mm thickness with PCGT lamination for the walling. |
| 14 | Providing and fixing of RPUF insulated panels of atleast 30mm thickness with PCGT lamination for the roofing. |
| 15 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings and the direction.(Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings and the direction.(Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 17 | Providing and fixing aluminium tower bolts , ISI marked , anodised (anodic coating not less than grade AC 10 as per IS :1868) , transparent or dyed to required colour or shade , with necessary screws etc. complete - 200 x10 mm |
| 18 | Providing and fixing aluminium handles , ISI marked , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade,with necessary screws etc, complete - 125 mm |
| 19 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side , having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (both primary and secondary sealant) etc. as per specifications, drawings and direction complete |
| 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - electric resistance or induction butt welded tubes |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 fine aggregate : 8 graded stone aggregate 40mm nominal size) |
| 22 | Providing corrugated G.S.sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required - 1.00 mm thick with zinc coating not less than 275 gm /sq.m |
| 23 | 2000LPH RO SYSTEM Electro MechanicalProviding community water system inclusive of survey, testing, design, build, install, commission, operate, maintain water purification system including defect liability period of one year from the date of commencing at various places in Karaikal region.Purification System:The purification system will be as designed by the Company based on the analysis of the existing raw water and shall include all the components like pre-filtration units including aeration, sedimentation and oxidation systems as required, membrane systems, disinfection systems, sanitization systems, dosing systems, storage systems etc. to provide output product water complying to IS10500 standards. Pre-Installation activities, including water analysis, site analysis, survey, etc. |
| 24 | 10 Stage Purification System Details given below:Stage-1: Raw water tank 2000Ltr with 1HP Pump single phase motor 1.5 HP three phase 5-stage Feed pump with CPVC pipe line SMBS Dosing pump 1 no with Dosing tank white colour 100Lr 1 no Feed Masure in Feed outlet pressure kg grate only.Stage-2: IRF Vessel model 16 X 65, with MPV Top mount Front facing, 4\\" top opening media IRF Vessel Full of Pebbles, Mno 2. core silex.Stage-3: DMF Vessel model 16 X 65 with MPV Top mount Front facing, 4\\" top opening media IRF Vessel Full of Pebbles, core silex, fine silex.Stage-4: ACF Vessel model 16 X 65 with MPV Top mount Front facing, 4\\" top opening media IRF Vessel Full of Pebbles, core silex, coconut shell 900, IV griatd (carbon).Stage-5: Antiscalant dosing with dosing pump and tank pump 0-6 LPH 4/ Bar digital type 100 Ltr white colour tank. Stage-6: Micron filtration 2 nos (2 Stage), 20\\" Jumbo wound-cartridge filter and Low-pressure switch (LPS)- 1 no. |
| 25 | Stage-7: 3HP three phase Motor(High pressure pump) vertical type stage 4-16 or 4-18 By pass pipe line with UPVC pipe, High pressure switch, Re-circle (Rotameter),HP pump to membrane line (11/4\\" Pipe line is UPVC only), Membrane Housing model 8040- single element, Membrane model 8040(1000LPH), PU Fitting, Pipeline or Push Brass fitting, Roto metre and Range 2400LPH, RO Inlet pressure kg and outlet Pressure kg, three phase Control panel Board 3:3, raw water pump and high pressure pump inlet to outlet pressure purpose, Rejection line and Auto Flushing SS Solenoid valve, production line with connectivity sensor including assembly of skide size 5 x 5.75 x 2.5 feet.Stage-8: U.V Filter system 25Lr, 2000LPH Production tank inlet pipe line UPVC 1\\" Pipe line, Production Water (RO Water) Storage tank white Colour3 layer PVC 4000Lr with Auto Cut Float 1 nos.Stage-9: RO water Delivery line of 1 1/2\\" UPVC pipe line and 1 1/2\\" Operating Valve. Stage-10: Bag Filler 10\\" Jumbo Housing and Bag filter 10\\" with Pressure kg, 11/2\\" full Brass water meter Class B, Tap bank (RO water Delivery Tap) 3 nos top ADU Connection and 2 nos top Manual purpose total-5nos. |
| 26 | Technical Datasheet1. Raw water Tank - 4000 Ltrs HDPE White2. Feed Pump - 2.5m3/hr 35m Head | 3Ph | SS3043. FRP Tank (Sand | ACF | IRF) - 1665/4.0\\" Top Opening4. Multi-port Valve (Manual) - 25NB TMF Front Facing with strainer5. MCF Housing - 20\\" Jumbo Virgin | 1.5\\"]6. Cartridge - 20\\" Jumbo 5Mic Wound.7. MCF Housing (Bleeding Line) - 10\\" Slim Virgin | 1/2\\"8. Cartridge (Bleeding Line) - 10\\" Slim 5Mic Wound9. MCF Housing (CIP Line) - 20\\" Slim Virgin/3/4”10. Cartridge (CIP Line) - 20\\" Slim 5Mic Wound11. Dosing Pump (chlorination) - 0-6LPH12. Dosing Tank - HDPE 100 Ltrs13. Dosing Pump (SMBS) - 0-6LPH14. Dosing Tank - HDPE 100 Ltrs15. Dosing Pump (Antiscalant) - 0-6LPH16. High Pressure Pump (4/16) - 2.5m3/hr 130m Head | 3Ph | S530417. Membrane Housing - 8040 End Port | 3 Psi | White18.Membrane-BW-8040 19. Dosing Pump (pH Boosting) - 0-6LPH 20. Dosing Tank - HDPE 100 Ltrs |
| 27 | 21. Low Pressure Switch - Online22. High Pressure Switch - Online23. Level Switch - Floaty Blue (3 Mtr Cable)24. Flow meter - 25-2500 LPH 2300325. Pressure Guage - 0-7 kg/cm2, (bottom)26. Pressure Guage - 0-7 kg/cm2, (panel)27. RO skid - To Mount Mem Hsg | HP Pump | Panel | Wet panel | Cartridge Filters | DP etc | SS304 | 32 sq.mm 5 feet x5.75 breath x2.50 length28. Piping & Fittings – UPVC/CPVC29. CIP Tank - HDPE 100 Ltrs30. UV System - ECS 15L (3/4\\")-1000 LPH31. Product Water Tank - HDPE 4000 Ltrs32. Flow Totaliser - 1.5\\"33. 10” BVA - 10\\" Bag Vessel Assembly | Virgin34. Control Panel - 1:1 with conductivity sensor35. Auto flushing - 3/4\\" SS36. Cable for RWP & HPP - Cable: 2core, 2.5 mm2 copper37. Cable for LPS/HPS/Floaty - Cable 2 core, 1.0 mm2 coper38. Media - Pebbles39. Media - Core Silex40. Media - Fine Silex41. Media - MnO242. Media - Carbov 800 IV43. Chemicals - Antiscalent44. pH |
| 28 | Electrical Materials1. 15\\" X 12\\" Wooden Box (Consealed Box)2. 15\\" X 12\\" Mica Sheet (Only Mica Seat)3. 32A Fuse carrier4. 40A MCB 2 Pole5. 10A MCB 1 Pole6. 5-40 Sub Meter (Energy Meter)7. 6A Indicator8. 4 Pole MCB Metal Box9. 8 Switch, 1 Socket modular Switch Box10. 2 Switch, 2 Socket modular Switch Box11. 6A Switch12. 6A Socket13. 4 X 4 PVC Box14. 1\\" Casing & Coupling15. 4 Sqmm Wire (Copper)16. 1.5 Sqmm Wire (Copper)17. 1 Sqmm Wire (Copper)18. 1\\" Metal Screws19. Insulation Tape20. Tube Light Fitting (Full Set) – 3 nos |
| 29 | 21. Street Light Fitting (CFL Model) – 3 nos22. Street Light Fitting Bracket – 3 nos23. LED Bulb 25W24. 2.5 Sq.mm 3 core cable (Round Cable)25. 1.5 Sq.mm. 2 Core Cable (Block round)26. Cable Tic (medium)27. PVC Pipe ¾” 2 mm 28. 1” Flexible Hose29. ¾ clamp30. Indicator Lock type31. Rotameter |
| 30 | Providing installation water Automatic dispensing unit (ADU) synchronized with R.O system as per the best design as approved by the Engineer-in-charge. Contact less Smart Card (RFID – 13.5Mhz)) Authentication for Water dispense, LCD with backlight for Status & information,Volume based vending, Battery backup in case of power failure for dispensing water, Warning for low battery and automatic cutoff, Amount count and volume count facility, Remote monitoring of the dispensing unit through Wifi, Report generation at the server as requirement.Data transmitted along with real time i.e. date, time, Multiple Tap option, Amount deduct from the card can be programmed (Differential pricing), Multiple volumes can be dispensed in the same unit, Recharge of card through Mobile App, Card less dispense by scanning the QR code and doing the payment, Recharge of the card through online, data stored in the card in encrypted format, RFI D cards can be grouped, Rate change in the ADU remotely, Optional TDS display, Card block through web Water level monitoring, Amount not deducted after low water level detection, 1inch 12 V DC ss solenoid valves, (confirming to IS std) 1inch turbine flow sensors. |
| 31 | SMPS based power supply for standard output, Input range – 180V-270V AC 50 Hz.,12V 65ah battery, Option to connect solar panel, Earnings Statement weekly/montly/yearly or date specific, Dispense statement,Recharge statement, Card wise recharge statement, Card wise Dispense statement, Post-installation quality audits and water tests conducted by Water Testing Laboratories of the Govt. of Puducherry. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender