Tender For Repair/Replacement Of Iron Gates, Ventilator, Turbo Ventilator & Certain B/R Works In Certain Buildings In X Area At Afs Amla
Tender Value
18 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
18 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Iron Gates, Ventilator, Turbo Ventilator & Certain B/R Works In Certain Buildings In X Area At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone works including taking out joints, hacking, of key and scrubing down with water complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 4 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sqm each complete all as specified and directed. |
| 5 | S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 6 | S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 7 | S & F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed |
| 8 | S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass,wire gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed. |
| 9 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 10 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 11 | S&F 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 12 | S&F 150mm long SI marked aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 13 | S&F 150mm long ISI Marked extruded aluminium alloy handles, cast type anodised complete all as specified and directed. |
| 14 | S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed. |
| 15 | S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane incl hacking out broken glass complete all as specified and directed. |
| 16 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 17 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, ink all complete all as specified and directed. |
| 18 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws including taking down old shutters complete all as specified and directed. |
| 19 | S&F 5.5mm thick sheet tinted glass selected quality and glazing in squares exceeding 0.50 sqm in each pane of aluminium door / window complete all as specified and directed. |
| 20 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and direced. |
| 21 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame work complete all as specified and directed. |
| 22 | Taken down and refixing in same opening after resecuring or easing and adjusting, shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed. |
| 23 | M&L for mild steel miscellaneous work as in old existing steel door such as replacement of broken hinges ,clamp,iron hooks, MS Handles, MS hand made sliding door bolt etc or similor ms work including taking down of steel door ,welding for erecting of new ms hinges,clamp etc ,refixing of shutters in same or other opening alongwith all required greesing cleaning complete all as specified and as directed. Note : Taking down and refixing of Double leaf shutter with above fitting count as one JOB. |
| 24 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 25 | S&F in repair mild steel Plates (plain or chequered) of any thickness channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in fire breakup box etc Fe 410 -W (Gde E- 250) quality A complete all as specified and dierectd. |
| 26 | Dismantling and refixing in repair mild steel plates (plain or chequered) of any thickness channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in breakup box etc complete all as specified and directed. |
| 27 | Dismantling expanded metal or mesh, any thickness, Weight N exc 4 kg per square metre, fixed with steel or wood fillets, if any complete all as specified and directed. |
| 28 | S&F in repairs Welded steel wire fabric Weight N exc 4 kg per square metre complete to wood or steel members complete all as specified and directed. |
| 29 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 30 | Dismantling mild steel framed work as in ventilator of storage sheds of any description not otherwise provided for complete all as specified and directed. |
| 31 | S&F mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 32 | S&F framed work such as grill, grating , etc, with end of bars shouldered and/or riveted, or forget in to spikes, framed guard bars, flat iron, angel, barred iron doors, ladder, framed balusters, walk ways, railings, framework of water tanks and and similer work GDE Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 33 | M&L for 18-20mm thick granite of any colour (of any type)work (table rubbed and polished ) in steps, jambs, pillars, window cills, corner shelf, cooking plateforms and like over 15mm thick screed bed in CM 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite and rounding and chamfering of projected portion and dismanling of existing marble /graniteetc complete all as specified and directed. |
| 34 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed. |
| 35 | M&L for brickwork with fly ash, subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 36 | All as per item No.35 above but except brick complete all as specified and directed.Note : All type bricks retrieved from item No. 34 will be used. |
| 37 | S&F in repairs 1.00 mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 38 | Ditto as per Item No.37, but gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 39 | Supply & fix in repairs axle/anchorage pipe 40mm dia MS black pipe heavy grade cut to size for full length (single peace) complete all as specified and as directed. |
| 40 | Supply & fix in repairs rolling hood cover 1.00 mm thick MS sheet bend to shape cut to length with a coat of zinc chrome primer complete all as specified and directed. |
| 41 | Supply & fix in repairs ball bearing heavy duty suitable for 40mm bore MS axle/ anchorage rod roller No-3206 or equivalent to suit proper functioning of rolling shutter complete all as specified and directed. |
| 42 | Supply & fix in repairs wire spring of rolling shutter, 90mm dia and 450mm long, standard quality with MS wire not less than 8mm dia complete all as specified and direced. |
| 43 | Supply & fix in repairs MS pulley 40mm dia of approved make suitable for existing rolling shutters at site complete all as specified and direted. |
| 44 | Supply & fix in repairs lever gear box with crank handle and gear assembly 11 inch size complete all as specified and directed. |
| 45 | Demolition of cement concrete ( unreinforced) as in ground floor and paving not exc 15 cm thickness below or above GL complete all as specified and directed |
| 46 | M&L for 100 mm thick PCC 1:2:4 Type B-I (20mm graded stone aggregate ), as in top layer , finished even and smooth without using extra cement including necessary form work complete all as directed. |
| 47 | M&L for forming 12mm thick expension joint by mechanical cutter filled with preformed bituminous filler board and top 30mm primed and sealed with sealing compound grade 'A' for thickness of concrete slab 100 mm thick complete all as specified and directed. |
| 48 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for . water troughs and the like including weathering, slightly rounded or chamfered angles and throating and demolition of existing concrete of any description complete all as specified and directed. |
| 49 | Supply and fix in repairs high proformence industrial circulator/ ventilator wind driven turbine dia of bottom ring 600 mm Top plate and bottom ring made of stainless steel with FRP base to match roofing sheet with polyster rasin powder coated top of the ventilator turbine made of aluminium with integrated and reinforced main bearing housing the shaft of stainless steel and varplitch from aluminium rotation bearing made of twin ZZ ball bearing encased in single integrated bearing and housing etc complete all as specified and directed. |
| 50 | S&F Rough cast, wired figured glass, 6.4mm thick and glazing with oil putty in squares exc 0.75 Sqm but not exc 1.00 Sqm including hacking out old broken glass of any height complete all as specified and directed. |
| 51 | M&L for Oiling and greasing as in old existing steel door such as hinges ,clamp,iron hooks, sliding door bolt, railing, channel etc or similar ms work including two coats of synthetic enamel paint with preparation old steel surfaces , cleaning complete all as specifed and as directed. Note : Taking down and refixing of Double leaf shutter with above fitting count as one JOB. |
| 52 | M&L for taking down existing reinforced surfaces of lintel and chhajas n.exc 10cm thick and repair the surface with micro concrete with wire netting and and finish surface and applying two coats white wash complete all as specifed and as directed. |
| 53 | M&L for rendering 15 mm thick cement plaster , (10 mm thick backing coat in CM 1:6 and 5 mm thick in CM 1:4) on fair faces of brickwork or concrete finsihing even and smooth without using extra cement complete all as specified and directed. |
| 54 | M&L for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 55 | M&L for complete removal of existing treatment prepartion of old plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces with filling cracks with wall putty of any height complete all as specified and dirceted. |
| 56 | All as per item No 55 above but new sufaces except complete removal complete all as specified and directed. |
| 57 | M&L for preparing new surfaces of walls and applying two coat of cement base paint over a coat of primer including use of scaffoldings complete all as specified and directed. |
| 58 | m&l for complete removal of existing treatment of walls and applying two coat of cement base paint, including cracks filling with exterior wall care putty where ever necessary and complete all as specified and directed. |
| 59 | M&L for preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed. |
| 60 | M&L for prepatation of new surfaces two coats of interior emulsion on wall newly plasterd surfaces over a coat of primer complete all as specified and directed. |
| 61 | M&L for preparing of old decorative surface of walls and distempered with one coat of oil emulsion complete with cracks filling with care wall putty where ever necessary and complete all as specified and directed. |
| 62 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 63 | M&L for preparation of new steel surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 64 | M&L for complete removal and preparation of old steel surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 65 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender