Tender For Annual Operation And Maintenance Of Madhmaheshwar Shp (3X5mw) Located In Tehsil Ukhimath, District- Rudraprayag, Uttarakhand
Tender Value
74.41 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
22 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Operation And Maintenance Of Madhmaheshwar Shp (3X5mw) Located In Tehsil Ukhimath, District- Rudraprayag, Uttarakhand
BOQ
| Sl. No. | Item Description |
| 1 | Daily Operation, monitoring and logging of all 3 (three) unit and related work including transformers, switchyard equipment, capacitor bank, DC bank etc. with all labor, material T&P etc. required for proper completion of work on daily basis. |
| 2 | Site visit of Engineer required for fault rectification of E&M equipment of plant up to the satisfaction of plant in charge including all labor T&P etc. required for completion of work. Spares shall be supplied by UJVNL SCADA, PLC Control, Metering and Protection PanelsACB & SF6 Circuit Breaker Power & Auxiliary transformersBattery charger, UPS & Battery BankLubrication oil systemOil pressure unit.DE & NDE bearing of generator.Turbine & MIVCVT 250kVAEOTCapacitor bank |
| 3 | Daily cleaning of all E&M equipment, Control & Protection panels, Cleaning of turbine floor, control room, Service Bay and make it oil/dust free. including all labor, material (Old dhoti, brush, detergent, WD40, degreaser etc.), T&P (Air blower etc.) required for proper completion of work on daily basis. |
| 4 | Preventive maintenance of all E&M equipment of plant on routine basis to minimize breakdown of E&M equipment by skilled manpower & maintain proper record including all labor, material T&P etc. required for completion of work. The brief description of preventive maintenance works described as given below: -i. Greasing, lubrication of all equipment.ii. Filtration/Dehydration of LOS & OPU oil regularly.iii. Filtration/Dehydration of Transformer oil.iv. Checking & maintaining oil level in LOS, OPU & Switchyard equipment.v. Inspection of Under water parts of turbine from D/T side after dismantling of expansion joint of Unit-I, II & III (twice in a year)vi. Checking tightness of Nut & Bolts of E&M equipment Specially LT & HT Bus bar. |
| 5 | HT & LT Breaker:- General Servicing, Repairing, Calibration and testing of 8 Nos HT Breaker (SF6) make ABB and 5 Nos LT ACB breaker make ABB by OEM Authorized person, Supply & replacement of all limit switches, complete in all respect including all men, material & all T&P required for proper completion of work. |
| 6 | General Servicing & Breakdown maintenance of 62.5kVA DG 2 (two) number 62.5 kVA DG set one at Madhyamaheshwar powerhouse (Kirloskar) and other at Jugasu Mansuna (Cummins) performed by authorized service center arranged by contractor for breakdown free operation of DG set including all labor, material, T&P etc. required for completion of work. |
| 7 | Forebay water level Transmitter, Model- CLT5-SS, Range 6M, Cable 15M, Output 4-20mA, Power supply 24VDC, 2 wire, Make- Cirrus. (As par sample) |
| 8 | Pressure Transmitter range 0 to 60 bar, Output 4-20mA, Make- Gefran (As par sample) |
| 9 | Straub OD 60.3mm, material AISI 304 (As per Sample) |
| 10 | Straub 50.8mm, material AISI 304 (As per Sample) |
| 11 | HRC fuse NSD2, 2A 500Vac, Make- Bussmann |
| 12 | HRC fuse NSD4, 4A 500Vac, Make- Bussmann |
| 13 | HRC fuse NSD6, 6A 500Vac, Make- Bussmann |
| 14 | HRC fuse NSD10, 10A 500Vac, Make- Bussmann |
| 15 | Glass fuse 2A 250Vac, Make- Bussmann |
| 16 | HRC Fuse 3A for PT, High voltage 3.6kV, Make- Anand (As par sample) |
| 17 | HRC Fuse 1A for Excitation Transformer, High voltage 3.6kV, Make- Anand (As par sample |
| 18 | Push button, Flush Mounted, Color- black, blue, red, green, yellow each color 10 Nos, make- Schneider. |
| 19 | NO contact for Push button, make- Schneider |
| 20 | NC contact for Push button, make- Schneider |
| 21 | LED light for outer area of powerhouse 120W, Model- BRTFG 120W LED, I/P voltage-240, 50 Hz, IP 66, Make-Bajaj (As per Sample) |
| 22 | LED light for Machine Hall, Product Name - BGHBC 150W LED XL NB, Product Code- 169984, I/P voltage-240, 50 Hz, IP 65, Make-Bajaj (As per Sample) |
| 23 | Flow meter range 0-66L/min, Make KROHNE (As par sample) |
| 24 | Differential pressure switch (As par sample) |
| 25 | Pressure gauge 0-70kg/cm2, Make Waree (As par sample) |
| 26 | RTD for DE Thrust/Counter thrust PAD (As par sample) |
| 27 | Proximity sensor (As par sample) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender