Tender For Construction of Sdpo Office Cum Residence At Bhabanagar (Sh:- Construction of Building Portion Ws & Si Septic Tank Rain Water Harvesting Tank Site Development And Proposed Approach Road Etc.). Estimated Cost:-₹ 1,78,23,823/- Earnest Money:
Tender Value
1.78 Crore
Estimated cost
Bid Submission
02 Aug 2026
3 days left
EMD
5000
Bank guarantee accepted
Document Fee
3.56 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Sdpo Office Cum Residence At Bhabanagar (Sh:- Construction of Building Portion Ws & Si Septic Tank Rain Water Harvesting Tank Site Development And Proposed Approach Road Etc.). Estimated Cost:-₹ 1,78,23,823/- Earnest Money:-₹ 3,56,500/- Time:- Twelve Months.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-In-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site (to be arranged by the contractor) including its stacking, leveling, dressing including all lead and lifts by head load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and all other incidentals to complete the work as per HP PWD specification. Any loss to the public/private property during the course of execution and disposal of unserviceable material shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royalty, Malkana, toll tax, GST or other taxes imposed by the Government |
| 2 | Excavation in foundation and trenches in earth work in all height and depths in all kinds of soil, including saturated soils comparising of pick work, jumper work, blasting work both in soft and hard rock with chiselling and wedging out of rock ( where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site., according to the HP.PWD specification of 1990 (One thousand nine hundred ninety) volume-I (One) and sorting out useful and unuseful material and transportation of the unuseful material for disposing off to dumping site (to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transporation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineris, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts and all other incidentals through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by him in all respects including all incidental charges. |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Stone filling under floor dry hand packed with hard stone of approved quality consolidated properly with hand or mechanical rammer or by hand durmoot to required level as per HPPWD specification 1990 (One thousand Nine hundred Ninety) volume-I including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts and all other incidentals, and as per direction of the Engineer-in-charge including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge .. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by theGovernment. |
| 5 | Providing and laying in position cement concrete of 1:2:4 (One cement : Two coarse sand) : four graded stone aggregate 20 mm (Twenty millimetre) nominal size for all work up to plinth level excluding the cost of centering and shuttering, finishing and reinforcement and curing complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge. .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (one cement : three coarse sand : si graded stone aggregate 20mm ( twenty millimetre) nominal size graded stone aggregate upto plinth level and curring complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level and curring complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10(one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level and curring complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Providing and laying damp-proof course 50mm ( fifty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 20mm ( twenty millimeter) nominal size and curing complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or othertaxes imposed by the Government. |
| 10 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10 (Ten) of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 11 | Random rubble masonry / polygonal uncoursed/ brought to courses with hard stones of approved quality in superstructure above plinth level upto all floor level including leveling up with cement concrete 1:6:12 ( one cement: six coarse sand : twelve graded crushed stone aggregate ) 20mm ( twenty milimetre ) nominal size at window sills, ceiling level and the like at plinth level in cement mortar 1:6 ( one cement: six coarse sand ) and curring complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth and curring complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with cement content not less than of 400Kg ( four hundred kilogram) per cubic metre excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level and curring complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size with mimimum cement content not less than of 400Kg ( four hundred kilogram) per cubic metre in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement and curring complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 15 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with cement content not less than of 400Kg ( four hundred kilogram) per cubic metre in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement and curing complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 16 | Centering and shuttering including strutting, propping etcetera. and removal of form work for Foundations, footings, bases for columns including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 17 | Centering and shuttering including strutting, propping etcetera. and removal of form work for wall including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 18 | Centering and shuttering including strutting, propping etcetera. and removal of form work for Suspended floors, roofs, landings, balconies and access plat form including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or othertaxes imposed by the Government. |
| 19 | Centering and shuttering including strutting, propping etcetera. and removal of form work for Shelves (Cast in situ) including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 20 | Centering and shuttering including strutting, propping etcetera. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax,GST or other taxes imposed by the Government. |
| 21 | Centering and shuttering including strutting, propping etcetera. and removal of form work for Columns, piers, abutments, pillars, posts and struts including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 22 | Centering and shuttering including strutting, propping etcetera. and removal of form work for Stairs (excluding landing) except spiral stair case including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 23 | Centering and shuttering including strutting, propping etcetera. and removal of form work for Small lintels not exceeding 1.5 m( one Point five meter ) Clear span modelling as in cornies window sills, string coures, bands, coping, bed plates, anchor blocks and the like including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax,GST or other taxes imposed by the Government. |
| 24 | Centering and shuttering including strutting, propping etcetera. and removal of form work for Edges of slab and break in floors and walls under 20cm (twenty centimeter) wide including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 25 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER Shyam steel make for R.C.C work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D (five hundred) or more steel bars including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 26 | Square rubble mansory with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six coarse sand: twelve graded stone aggregate 20mm(twenty millimeter nominal size) upto plinth level with : cement mortar 1:6 (one cement :six coarse) and curring complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposedby the Government. |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:4 (one cement : four coarse sand) and curing complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 28 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) and curing complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 29 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one cement : four coarse sand) and curing complete including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and all other incidentals as per PWD specification and as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 30 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera. complete at all levels. Granite of any colour and shade on Area of slab over0.50 sqm (zero point five zero square metre) including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 31 | Providing and fixing Float glass panes of nominal thickness 4mm ( four millimetre) make of Modiguard, Saint Gobain, Asahi (weight not less than 10kg/sqm (ten kilogram per square metre) for renewing glass panes with putty and nails wherever necessary including racking out the old putty complete upto all floor drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 32 | Providing and fixing 20mm ( twenty millimetre) dia curtain rods of 1.25 mm (one point twenty five millimetre) thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. (chromium plated) brass screws and wooden plugs, etceteraetera wherever necessary complete including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 33 | Providing and fixing M.S. grills of approved pattern in frames of windows etceteraetra with M.S. flats, square or round bars etcetera. including priming coat with approved steel primer all complete fixed to steel window/ wooden frame by welding/ rawl plugs/ screw etceteraetra upto all floor level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 34 | Providing 40x5 mm (Forty into five millimetre) flat iron hold fast 40 cm (Forty centimetre) long including fixing to frame with 10 mm (Ten millimetre) diametre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetre) 1:3:6 mix (One cement : three coarse sand : six graded stone aggregate) 20mm (Twenty millimetre) nominal size including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 35 | Providing and fixing oxidised M.S. (mild steel) casement stays (straight peg type) with necessary screws etcetera. complete.250 mm (two hundred fifty millimeter) weighing not less than 150 gms (one fifty gram) complete upto all floor including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 36 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with ISI (Indian Standard Institution), IS : 3564, (Indian standard :Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etcetera. complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 37 | Providing and fixing 100mm brass mortice latch & locks with 6 (six) livers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etcetera. complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by theGovernment. |
| 38 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.. |
| 39 | Providing and fixing 300x16mm (Three hundred into sixteen millimetre) nominal size. aluminium sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etceteraetra. complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 40 | Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) nominal size. aluminium steel sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etceteraetra. complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 41 | Providing and fixing 250x10mm (Two hundred fifty into ten millimetre) nominal size aluminium steel tower bolts, ISI(Indian Standards Institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian standred one thousand eight hundred sixty eight ) transparent or dyed to required colour or shade, with necessary screws etceteraetra complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 42 | Providing and fixing 200x10mm (two hundred into ten millimetre) nominal size aluminium steel tower bolts, ISI(Indian Standards Institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian standred one thousand eight hundred sixty eight ) transparent or dyed to required colour or shade, with necessary screws etceteraetra complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 43 | Providng and fixing 125mm (one hundred twenty five millimeter) aluminium handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etceteratra complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | Providng and fixing 100mm (one hundred millimeter) aluminium handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etceteratra complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 45 | Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour and shade, with necessary screws etcetera. Twin rubber stopper complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by theGovernment. |
| 46 | Providing and fixing double rebates MS channel iron doors window clerestry window framminfg manufacturing framme MS channel 125x50 mm (one hundred twenty five into fifty millimeter) and MS FLAT 125x4 mm(one hundred twenty five millimeter) as per direction of Engineer- In -Charge and apporoved drawing including hinges lock jambs beed and if require angle thrash hold of mol;d steel angle 50X25 mm (fifty into twenty millimeter) welded or rigidly fixed by mechanically means lugs with split and tails to each jambs including steel but hinges 2.5 mm (two ppoint five millimeter)thick with provision for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 47 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 40x40x4 mm (fourty into fourty into four millimeter), joints mitred and welded by angle iron 40x40x4 mm (fourty into fourty into four millimeter) or 50x 4 mm (fifty into four millimeter) flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 48 | Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including Stainless Steel butt hinges with necessary screws etc complete entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 49 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetera. complete.Triple strip vertical type complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 50 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm(mild steel flat fifteen into three millimeter) and nuts & bolts complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 51 | Providing and fixing angle iron cup board frames manufactured from M.S. angle iron section 25x25x5mm ( twenty five into twenty five into five millimetre) thickness including hinges jamb, lock jamb , beed and if required angle thrashold of mild steel angle 25x25mm ( twenty five into twenty five millimetre) welded or rigidly fixed by mechanical means , lugs with split end tails to each jamb including steel butt hinges2.5mm ( two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and all other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 52 | Providing and fixing 19mm (ninteen millimeter) thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etcetera all complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 53 | Providing and fixing 19mm (ninteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etcetera all complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing 6mm (six millimeter) thick water proof kit ply of standard quality ISI mark and approved shade and colour in wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) all complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Providing and fixing 1.00mm (one millimeter) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etcetera all complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 57 | Structural steel work(TATA/SAIL/Apollo/JSW or equivalent Make ) welded in single / built up section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.In trusses and trussed purlins in building complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | Providing and fixing M.S. (mild steel) fan clamp type I or II of 16 mm (sixteen millimetre) dia M.S. (mild steel) bar, bent to shape with hooked ends in R.C.C. (reinforced cement concrete) slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 60 | Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 61 | Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm,laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand):Medium shade pigment using 50% white cement and 50% ordinary cement complete including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Medium shades pigment using 50% white cement and 50% ordinary cement complete including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 63 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm (Ninteen into ninteen millimetre) square bar with a clear height of 85cm (Eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm (Forty into six millimetre) size complete with a applying priming coat of red lead paint complete (Apollo/Jai Bharat/Tata) including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 64 | Providing and fixing mild steel tube of TATA/ SAIL /APOLLO /JSW or equivalent make hand rail of approved size by welding etcetera. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer using structure steel etceteraetra as required complete up to all floor level including entire carriage of material in all leads and lifts and all other incidentals and as per drawing and technical specification and as per direction of Engineer-in-charge..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposedby the Government. |
| 65 | Providing and laying antiskid digital ceramic glazed floor tile of size 300x300 mm (three hundred into three hundred millimeter) (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK//KAJARIA/ ORIENT & BELL/ SIMPOLO/JOHNSON or equivalent of approved shade, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm (at the rate three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etcetera., complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 66 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/JOHNSON or equivalent of approved make in all colours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thickbed of cement Mortar 1:3 ( cement: 3 coarse sand and jointin with gre cement slurr @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade 6 mm thick White glazed tiles dado (30x45cm) in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 67 | 6 mm (six millimeter) thick White glazed tiles dado (30x45cm) (thirty into fourty five centimeter) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/JOHNSON or equivalent of approved shade, in skirting risers of steps and dado 12 mm (twelve millimeter) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry and jointed with cement slurry complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Medium shade pigment using 50% white cement, 50% ordinary cement complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing 6mm (Six millimeter) thick everest board ceiling cassade with suitable screws for board in ceiling etcetera. complete (frame work to be paid seperatately) complete upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and all other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 70 | Providing and fixing 6 mm (six millimeter) thick plain multipurpose cement board as per IS: 14862 (Indian Standred : Fourteen thousand eight hundred sixty two) (Hight pressure steamcured) with suitable screws for cement particle board in ceiling etcetera. complete (frame work to be paid seperatately) complete upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and all other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 71 | Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/D-plast/ Vectus or equivalent make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing Single socketed pipes 75mm ( seventy five millimetre) dia of Supreme/Fenolax/D-plast/ Vectus or equivalent make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing and fixing 110mm(One hundred ten Millimeter)Size Supreme/Fenolax/D-plast/ Vectus or equivalent make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Coupler |
| 74 | Providing and fixing 110mm (One Hundred ten Millimeter) dia Supreme/Fenolax/D-plast/ Vectus or equivalent make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Single Pushfit Coupler |
| 75 | Providing and fixing 110mm(One hundred ten Millimeter) Supreme/Fenolax/D-plast/ Vectus or equivalent make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Bend |
| 76 | Providing and fixing 0.60mm (zero point six zero millimeters) thick prepainted galvanized sheet of tata/sail/jindal or equivalent steel in roofing with hot dipped metallic zinc coated sheet with top of regular modified polyster RNP organic coating of 20 (twenty) microns over 5(five) microns primer coating to back coat of polyster of 5 (five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeters) dia meter with prepainted limpet and rubber washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and all other incidentals and all other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 77 | Providing and fixing ridges or hips of tata/sail/reliance/jindal steel or equivalent 90cm(ninety centimeters) over all with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20(twenty) microns over 5(five) microns primer coating plus back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J and L hooks, bolts and nuts 6mm (six millimeters) dia and prepainted G.I. limpets and bitumen washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and all other incidentals and all other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 78 | Providing and fixing valley of tata/sail/reliance/jindal steel or equivalent 90cm (ninety centimeters) overall 0.60mm (zero point six zero millimeters) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5(five) microns primer coating including fixing with prepainted irons J or L hooks, bolts and nuts 6mm (six millimeters) dia with prepainted G.I. limpet and bitumen washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and all other incidentals and all other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 79 | Providing and fixing, 15cm.( fifteen centimeter) Wide 40cm.( Forty centimeter) Overall semi-circular plain G.I sheet gutters with iron brackets, 40x3(Forty into three) milimetre size bolts and nuts and washer etceteraetera including making necessaary connections with rain-water pipe complete as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and all other incidentals and all other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 80 | Providing and fixing MS B.P. sheet 1.66mm to 2mm (one point six six millimeters into two millimeters) thick of tata/sail/reliance/jindal or equivalent in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete up to all heights as per the instruction of Engineer-in-charge (base members of steel work shall be measured and paid separately), as per the directio of Engineer-in-Charg and technical specification includin entire carriage of materials within all leads and lifts and all other incidentals and all other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 81 | 15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall of mix 1:4 ( one cement : four coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 82 | 15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 83 | 6 mm (six millimetre) cement plaster of mix in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 84 | Distempering with Oil Bound Washable Distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer of ASIAN/NEROLAC/ICI-DULUX or equivalent complete upto all floor level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 85 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 86 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eight zero litre per ten square meter)of approved brand and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax,GST or other taxes imposed by the Government. |
| 87 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eight zero litre per ten square meter)of approved brand and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 88 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 89 | Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer ( J K White/ Birla White ) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax,GST or other taxes imposed by the Government. |
| 90 | Providing and laying 60mm (sixty millimeter) thick faciory made cement concrete interlocking paver block of M -30 (M- thirty) grade made by block making vibratory compaction, of approved size, design & shape, laid machine with strong in required colour and pattern over and including 50mm (fifty millimeter) thick compacted bed of coarse sand, filling the joints with line sand etcetera. all complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 91 | Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm (fifteen into twenty two centimeter) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm (ten centimeter) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm (fourty millimeter) nominal size and 7.5 cm (seven point five centimeter) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty millimeter) nominal size) and finished with a floating coat of neat cement complete as per standard design all complete including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 92 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqmmixed (zero point four eight eigth killogram per square meter) with water proofing cement compound @ 0.253 kg/sqm. (zero point two five three killogram per square meter). (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (ten centimeter). (c) third layer of 1.5 mm(one point five millimeter) thickness consisting of slurry of cement @ 1.289 kg/sqm(one point two eight nine killogram square meter) mixed with water proofing cement compound @ 0.670 kg/sqm(zero point six seven zero killogram per square meter) and coarse sand @ 1.289 kg/sqm.(one point two eight nine killogram per square meter) This will be allowed to air cure for 4(four) hours followed by water curing for 48(forty eight) hours. The entire treatment will be taken upto 30 cm(thirty centimeter) on parapet wall and tucked into groove in parapet all around including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 93 | Constructing soak pit 1.20x1.20x1.20x1.25mm (One point two zero into one point two zero into one point two five metre) filled with brick bats including S.W. drain pipe 100mm (One hundred millimetre) and 1.20m (One point two zero metre) long as per design including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or othertaxes imposed by the Government. |
| 94 | Providing and fixing 110mm (One hundred one millimetre) nominal size PVC Cowl for ventilating pipe (Finolex/ Supreme/D-Plast make) confirming to IS 13592 including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge and .. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 95 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD-2.5(two point five) circular shape 450 mm (four fifty millimeter)internal diameter complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by theGovernment. |
| 96 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera., up to floor five level, excluding the cost of centering, shuttering and finishing :1:5:10 (one cement : five coarse sand): ten graded stone aggregate 40 mm (fourty millimeter) nominal size) complete and curring complete including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 97 | Providing weep holes in brick masonry / plain / reinforced concrete abutment, wing wall./return wall with 100mm (One hundred millimeter) dia PVC pipe, extending through the full width of the structure with slope of IV :20H (twenty horizontal) towards drawing face, complete as per drawing and MORTH technical specification.clause 2700 & 2200 (Two thousand seven hundred and two thousand two hundred) as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and all other incidentals and all other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 98 | Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and M.O.R.D. technical specifications clause 1204.3.8 (one thousand two hundred four point three point eight) as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads and lifts and all other incidentals and other incidental. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 99 | Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m(one point five meter), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimeter) in depth, including consolidating each deposited layer by ramming, watering, etcetera.and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty meter) : Pipes, cables etcetera, not exceeding 80 mm(eighty millimeter) dia. including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 100 | Providing and fixing white vitreous china pedestal type water closet (European type Single seat of CERA,HINDWARE,PARRYWARE, or equivalent make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern CERA,HINDWARE,PARRYWARE or equivalent make)andC.P. flush bend with fittings and C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 101 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa patternW.C. pan of size type foot rests 580x440 mm with integral complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 102 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with brass unions and G.I clamps complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 103 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/ Parryware/ Hindware or equivalent) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including China Wash basin size 630x450 mm ( Six hundred thirty into four hundred fifty millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 104 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar/Parryware/Hindware or equivalent make including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 105 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen Sink with drain Board: 510x1040 mm bowl depth 250mm entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 106 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquare Opal series or equivalent) including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 107 | Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme or equivalent make) flexible pipe complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 108 | Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modi Guard/Atul/Cera or equivalent make) including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 109 | Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etc complete including entire carriage of material within all leads and lifts and all other incidentals and all other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 110 | Providing and fixing CP brass toilet paper holder 1151N complete with CP brass brackets fixed to wooden plugs with CP brass screws compete including entire carriage of materials within all leads and Engineer-in-Charge .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 111 | Providing and fixing 110mm(One hundred ten millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 112 | Providing and fixing 75mm(Seventy five millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the direction of Engineer-in Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 113 | Providing and fixing 110mm(One hundred ten millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 114 | Providing and fixing 75mm(Seventy five millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 115 | Providing and fixing 110 mm (One hundred ten millimetre) dia nominal size PVC of ( Finolex / Supreme make) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etceteraetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 116 | Providing and fixing 75 mm (Seventy Five millimetre) dia nominal size PVC of ( Finolex / Supreme make) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etceteraetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 117 | Providing and fixing 110mm(one hundred ten millimeter) dia. PVC(Polyvinyl chloride) double equal branch plain ISI(Indian Standards Institute marked including fixing with aprooved adhesive etcetera. complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 118 | Providing and fixing 75mm(seventy five millimeter) dia.PVC(Polyvinyl chloride) double equal branch plain ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etcetera. complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 119 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etceteraetera complete upto all heights complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 120 | Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etceteraetera complete upto all heights complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 121 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etceteraetera complete upto all heights complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 122 | Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etceteraetera complete upto all heights complete including entire carriage of material with in all leads and lifts and all other incidentals and as per drawings and technical specifications and the directio of Engineer-in Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax,GST or other taxes imposed by the Government. |
| 123 | Providing and fixing 110x75mm ( One hundered ten into seventy five millimetre) nominal diametre PVC Finolex/Supreme floor trap I.S.I. marked of self cleaning design including fixing with course sand cast iron screwed down or hinged grating with out vent arm complete including cost of cutting and making goods the walls and floors upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 124 | Providing and fixing 600 mm (six hundred millimeter) long PTMT towel rail with total length of 645 mm,(six hundred fourty five millimeter) width 78 mm(seventy eight millimeter) and effective height of 88 mm,(eighty eigth millimeter) weighing not less than 190 gms.(one hundred ninty grams) PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) : including cost of cutting and making good the walls and floors :complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 125 | Providing and fixing 1216 (16mm OD ) pipe(one thousand two hundred sixteen) (sixteen millimeter outer diameter.)Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450(indian standard fifteen four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etceteraetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 126 | Providing and fixing 1620 (20 mm OD ) pipe(one thousand six hundred twenty) (twenty millimeter outer diameter.)Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450(indian standard fifteen four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etceteraetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 127 | Providing and fixing 15 mm (fifteen millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etcetera. Internal work and Exposed on wall including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 128 | Providing and fixing 20 mm (twenty millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etcetera. Internal work and Exposed on wall including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 129 | Making connection of G.I. distribution branch with G.I. main of size 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipe (TATA/JINDAL (Hissar), Tata Steel Tubes Ltd, Prakash Surya, B.S.T.) etceteraetera complete including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 130 | Fixing water meter and stop cock 200 mm(two hundred millimeter) nominal bore in G.I. (Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etcetera. complete ( cost of water meter and stop stop cock to be paid seprately) complete upto floor all level including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 131 | Providing and fixing 20mm (Twenty millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK or equivalent make including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 132 | Providing and fixing 25mm (Twenty five millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK or equivalent make including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 133 | Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/ Jaquar/ Finolex /Hindware or equivalent Makedrawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 134 | Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm ( one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty millimetre) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 135 | Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etcetera. complete (New work) including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 136 | Providing and fixing 20mm (twenty millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etcetera. complete (New work) including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 137 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 138 | Providing and fixing 15mm (Twenty millimetre) nominal bore C.P. brass bib cock of Jaquar (CON-047KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 139 | Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of Long body Jaquar (CON-107KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware or equivalent conforming to IS standards and weighing not less than 690 gms (six hundred ninety grams) complete including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 140 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Stop Cock of Jaquar ( CON-059 KN ) with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 141 | Providing and fixing PTMT Soap Dish Holder make of Prayag having length of 138mm,( one hundred thirty eight millimetre ), breadth 102mm ( one hundred two millimetre ), height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) of Jaquar/ CZAR/Cera make (OPAL Series) or equivalent including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 142 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 143 | Providing and fixing 15mm dia (fifteen millimeter diameter) CP brass tap capstan head of approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware or equivalent conforming to IS standards complete including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by theGovernment. |
| 144 | Providing and fixing 15mm dia (fifteen millimeter diameter) mixer kitchen sink with top / bottom swinging spout of approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware or equivalent conforming to IS standards complete including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 145 | Providing and fixing Approx. size considered 600 mm × 900 mmx12 mm thick compact laminate urinal divider of approved shade and make including SS-304 heavy duty brackets/clamps, screws, rawl plugs, edge finishing, labour, transportation and all incidental charges complete including entire carriage of materials within all leads and lifts and all other incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge ..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 146 | Loosening of the ground upto a level of 300 mm (three hundred millimeter) below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 (three hundred point one) and 300.2 (three hundred point two) for subgrade construction as per Technical Specification Clause 303.5.2. (three hundred three point five point two) including carriage of material through all modes of transportation with in all leads and lifts and all other incidentals ,as per PWD specifications and as per direction of the Engineer-in -Charge.The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government. |
| 147 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads,transporting to site ,sprteading, aggrading to require slope and compacted to meet requirement of Table 300.2 (three hundred point two) with lead upto 1000 m (thousand meter) as per Technical specification Clause 303.1 (three hundred three point one), including carriage of material through all modes of transportation with in all leads and lifts and all other incidentals ,as per PWD specifications and as per direction of the Engineer-in -Charge.The rates are inclusive octrol, royality, Malkana, toll tal, sale tax, or other taxes imposed by government. |
| 148 | Construction of granular subbase by providing well graded material, mixing in a mechanical mix plant at OMC ( Optimum moisture content), carriage of mixed material to work site upto lead of 1000 m (one thousand meter) spreading in uniform layers with motor grader on prepared surface and compacting with smooth wheel roller to achieve the desired density, complete as per Technical for grading I material Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government. |
| 149 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specificatio including premixing the materia with water at OM (optimum moisture content )in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN(eighty-one thousand kilonewton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetera as per Tables 400.11 (four hundred point one one ) & 400.12 (four hundred point one two) and Technical Specification Clause 406(four hundred six ).Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government. |
| 150 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm (zero point eight five kilogram per squaremeter) using mechanical means as per Technical Specification Clause 502 (five hundred two ).Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government. |
| 151 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg/sqm (zero point two seven five kilogram per square meter ) on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 (five hundred three) including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government. |
| 152 | Providing and laying surface dressing as wearing course consisting of a layer of bituminous binder laid on the prepared surface, followed by a cover of crushed stone aggregates of specified size and rolling with three wheel 80-100 kN (eighty -one hundred kilonewton) static roller including cleaning the road surface as per Technical Specification Clause 507 (five hundred seven) including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government. |
| 153 | Providing and Laying 30 mm (Thirty milimeter) bituminous concrete with 100-120 (one hundred - one hundred twenty )TPH batch type hot mix plant producing an average output of 75 (seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.5(at the rate five point five) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and aligment rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five hundred nine) complete in all respects including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol,royality,Malkana, toll tal, sale tax, or other taxes imposed by government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender