Tender For Renovation/Repair Of Ci Sluice Gate Of Size 1000X1000 Mm Installed At Channel No.1,2,7,8 Of North & South Filter House At Hpww-Ii.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Aug 2026
2 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation/Repair Of Ci Sluice Gate Of Size 1000X1000 Mm Installed At Channel No.1,2,7,8 Of North & South Filter House At Hpww-Ii.
BOQ
| Sl. No. | Item Description |
| 1 | Holding of Sluice Gate in its position by making a chain block & special type 2 leg type holding arrangement. |
| 2 | Dismantling of Drive arrangement by opening of both gear and removing of spindle, spindle nut from the guide etc. as required. |
| 3 | Removing of C.I. Flap of Sluice gate from the chamber by lifting arrangement & repairing of G.M. Sheet by welding, grinding & polishing etc. as required. |
| 4 | Blocking of flow by making sand bags etc. on channel to stop the incoming flow of Raw water etc. as per site required. |
| 5 | Repairing of G.M. Sheet by welding, grinding, polishing as required to smooth surface & leak proof etc. as required by job. |
| 6 | Repairing of spindle by remateling & machining etc. as required. |
| 7 | Repairing of G.M. Nut. |
| 8 | Repairing of gear drive arrangement with handle as per site required. |
| 9 | Fixing of complete sluice gate as per site required after rectification of all parts with flap & main body with spindle nut, gear drive arrangement etc. |
| 10 | I-Section beam of size 8” x 4” length of 3 meter long duly welding on M.S. Base Plate of size 12” x 12” x 12 mm on each bottom side & top side duly welding & drilling on each plate 4 Nos. holes for holding with one no. foundation bolt of size 3/4” x 18” – 4 Nos. on each & top 3/4” x 2” long – 4 Nos. on top size by fixing with beam of size 8” x 4” in horizontal position. |
| 11 | Fixing of I-Section beam of size 8” x 4” & length 5400 mm long & 1500 mm long – 1 No. Each & fixed on these vertical member of I-Section Beam of size 8”x4”x 3 meter long duly fixed in RCC Bottom side & fixed on horizontal beam 5.4 meter – 2 Nos. & 1500 mm – 2 Nos. in horizontal position as per frame size & also cross-welding of I-Section Beam of size 150x75 mm x 1500 mm long – 8 Nos. in horizontal position with welding on I-Section bam of size 8” x 4 “ in equal space as per location of sluice gate foundation bolt fixed on 2 Nos. I-Section beam of size 150 x 75, length 1500 mm long by duly welding. |
| 12 | On top of structure CC work is to be done on area of 5400 mm x1500 mm x 170 mm thick at the height of approximate 3 meter by manual labour with plastering on top of surface with curing also. |
| 13 | Testing and commissioning of complete set. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender