Tender For Supply And Construction Of 8 X Svl Bkr
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2026
10 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Construction Of 8 X Svl Bkr
BOQ
| Sl. No. | Item Description |
| 1 | 8 X SVL BKR |
| 2 | Excavating over areas, n exc 1.5 m deep and getting out soft /loose soil all as specified and as directed. |
| 3 | Excavating over areas, exc 1.5 m deep and n exc 3.0 m deep and getting out soft /loose soil all as specified and as directed. |
| 4 | M & L for Cement concrete 75 mm thick in fdn type B-2, 1:2:4 (40 mm graded aggregate) complete all as specified and directed. |
| 5 | M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in Foundation, including rafts, footing, foundation beams, bases for column etc complete all as specified and directed. |
| 6 | M & L for formwork to sides of rough finished flat surface of concrete foundations, footings, raft, bases of colums, plinth beams and simillar work vertical or to batter with cover blocks all as specified and as directed. |
| 7 | M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in walls, retaining walls, basement walls, and the like, any thickness, above top of footings, including attached pilasters and buttresses all as specified and directed. |
| 8 | M & L Formwork to sides rough finished squre, rectangular or polygonl surface of pillars, posts, struts, piers, columns and stanchions with cover blocks all as specified and directed. |
| 9 | M & L for RCC M-20 (Nominal Mix) type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, Balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 10 | M & L for Formwork to rough finished flat surface of concrete, soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work exceeding 200mm thick (Horizontal or sloping) with cover blocks all as specified and as directed. |
| 11 | M & L for Formwork to edges of rough finished flat surfaces of concrete roofs exc 20 cm wide with cover blocks all as specified and as directed. |
| 12 | M & L for Brick work with subclass 'B' bricks straight or curved on plan exeding 6 mtr mean radius built in parapet wall in CM 1:4 all as specified and as directed. |
| 13 | M & L for providing Cement concrete type B1, 1:2:4 (20 mm )graded aggregate) in coping complete all as specified and as directed. |
| 14 | M & L for Mild steel TMT Bar 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for strirrups all as specified and as directed |
| 15 | M & L for mild steel TMT Bar 12 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed |
| 16 | M & L for mild steel TMT Bar 20 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed |
| 17 | M & L for Rendering 15 mm thick on wall in CM 1:4 on fair faces of bricks work or concrete surfaces complete all as specified and as directed. |
| 18 | M&L Integral water proofing compund |
| 19 | M & L for Cement concrete 75 mm thick in flooring type B-2, 1:2:4 (40 mm graded aggregate) complete as specified and as directed. |
| 20 | M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and directed. |
| 21 | S&F for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. Make - SAIL/TATA/JSW/JINDAL/RINL. |
| 22 | S&F for 125mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 23 | S&F for 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 24 | S&F for 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed ® complete all as specified and directed. |
| 25 | M& L for preparation of new plastered surfaces of wall and applying two coats of synthetic enamel paint of approved colour and pattern over a coat of cement based primer complete all as specified and directed. |
| 26 | M& L for Priming surfaces and applying bitumen as a primer in base of APP membrane complete all as specified and as directed |
| 27 | M & L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 28 | M& L for preparation of new MS surfaces of door and loop hole and applying two coats of synthetic enamel paint of approved colour and pattern over a coat of red oxide primer complete all as specified and directed. |
| 29 | Supply and fixing in Wall PVC (SWR) pipe 110 mm dia for rainwater drainage complete all as specified and directed. |
| 30 | Supply and fixing in trenches 80 mm dia GI pipe light grade with all fittings complete all as specified and directed. |
| 31 | Returning,filling in including spreading , levelling,watering and well ramming in layers not exc 25 cm.complete all as specified and directed. |
| 32 | M & L Cement concrete in stairs in PCC 1:8:16 (40 mm graded aggregate) complete all as specified and as directed. |
| 33 | MS Sun shades made of 0.60 mm PPGI sheet reinforced with ISA frame 35 x 35 x 5 mm and MS flat 35 x 3 mm, will be provided above loop hole and door opening. The minimum projection of sun shade shall be 450 mm and 300 mm wide more than the opening. Sun shade shall be fixed in 20 degree downword slope and fixed with 8 Nos 12 mm dia 150 mm long nut & bolt in RCC wall including two coats of syenthetic enamel paint of approved colour and pattern complete all as specified and directed. Make : SAIL/TATA/JSW. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender