Tender For special Repair / Replacement To Various Buildings At Tech Area (B-Top) At Af Stn Borgad Under Ge (Af) Ojhar
Tender Value
38.80 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
7.76 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair / Replacement To Various Buildings At Tech Area (B-Top) At Af Stn Borgad Under Ge (Af) Ojhar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | BOQ AND PS CORRIGENDUM | BOQ | 17-Aug-2026 |
| 2 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
| 3 | 11-Aug-2026 | BOQ AND PS CORRIGENDUM | BOQ | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame, n.exc 1.5 sqm each with shutters (without taking off shutter from the frame) all as directed. |
| 2 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 & n.exc. 4 sqm in each complete all as directed. |
| 3 | Taking down shutters of any description not exceeding 1.00 sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed. |
| 5 | Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete. |
| 6 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed. |
| 7 | Taking up or down steel tubing and connections,including cleaning for re-fixing or removal to store bore of pipe 20 mm complete all as directed. |
| 8 | Dismantling PVC Pipe of any dia and any description laid in floor and wall complete all as specified and directed. |
| 9 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as directed. |
| 10 | Dismantling of stone slab and tiles of any description or thickness in floors or walls, aprons etc tiles laid, bedded and pointed in any mortar complete all as directed. |
| 11 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including PCC of existing roof, PCC tiles with screed bed and removing the demolished material outside MoD land at own arrangment of Contractor. |
| 12 | M&L for demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed. |
| 13 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off demolish material should be out of MoD land completed. |
| 14 | Demolition of cement Concrete of any description and in any position not otherwisespecifically provided for Complete all as speciified and as directed by Engr-in- Charge. Note: Rate inclusive for demolish material should be out of MoD land. |
| 15 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed. |
| 16 | Excavation in post holes each not exceding 0.5 cum getting out in hard/dense soil and removing excavated soil to a distance not exceding 50m and making good surface complete all as specified and directed. |
| 17 | M&L for Cement Concrete type B- 2 (1:2:4) using 40 mm graded stone aggregate as in foundation filling and mass concrete for fixing of MS post including necessary form work if required at site complete all as specified and directed. |
| 18 | Taking down carefully existing bitumen tarfelt including plastering upto 15mm thick cleaning the surface and make free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated and removing all foreign materials / Bituminous primer completely , cleaning and washing the existing surface of roof/slab, terraces including flashings and junctions of parapets/kerb walls etc and as directed by Engineer-in-charge.Note:(i) Contractor will not throw the debris and suitable arrangements shall be made to take down the materials from roof.(ii) Removing of the rubbish to a distance outside MoD land shall be at own arrangement of Contractor. (iii) Dismantling and Refixing of Overhead Water tank,lighting arrester, AC Duct or any other etc. and again ready for smooth working included in unit rate. |
| 19 | M&L for providing cement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etc all as specified and directed by Engr in ChargeNote : PCC shall be laid in slope and thickness shall be average(minimum average thickness 25mm or as per site requirement for maintaining the slope) as per site including filling in depression by providing concrete bench marks for maintaining the perfect slope to drain out the rain water as directed by Engr-in-Charge.Note: No hand mixing is allowed, mixing shall be at ground floor and mixed materials deposited on roof Manually/ mechanically to achieve the proper strength and workmanship. |
| 20 | Supply only integral water proofing compound |
| 21 | Supply only Liquid water proofing compound. |
| 22 | Material and labour for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment complete all as specified as under :- (a) Prepare surface by removing all laitance, foreign matter, dirt, oil, grease and loose particles.(b) All existing cracks and expansion joints. if any, shall be treated with PU range of polyurethane sealant.(c) Provide 75mmx75mm coving at H-V junctions if any using acrylic polymer modified mortar as bond coat.(d) Apply two coats of PU polyurethane based clear primer @ 8 to 10 sqm/ltr per coat on well prepared substrate covering entire area uniformly. (e) Apply polyurethane based high tensile strength elastomeric waterproofing liquid membrane coating in two coats by roller/airless spray @ 0.75Kg/sqm per coat. second coat is applied perpendicular to first dried coat (first coat is allowed to dry for 12 to 24 hours before proceeding for second coat) |
| 23 | M&L for brickwork with Fly ash bricks straight or curved on plan exc 6m mean radius built in 1:4 cement mortar complete all as specified and directed. |
| 24 | M&L for 16-20 mm thick Granite black colour, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like jointed over and including 10 mm thick cement mortar 1:4 screed and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, incuding grinding, moulding and polishing to exposed edges complete all as specified and directed. |
| 25 | S&F For Factory made single extruded WPC (Wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 X 70 mm Comprising of virgin PVC Polymer of k value 58-60 (Suspension grade ), Calcium carbonate and natural fibers(wood powder /rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screw with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N(Edge), minimum compressive strength of 58 N/mm2 , Modules of elasticity 900 N/mm2 and resistance to spread of flame of class A Category with property of Being termite /borer proof, water/moisture proof and fire retardent and fixed in position with MS hold fast/lugs/SS dash fasterners of required dia and length complete as per direction of Engineer -in -charge.(MS hold fast/lugs or SS dash fasteners shall be not paid for separately. NOTE:-(i) For WPC solid door/window frames,minus 5 mm tolerance in dimension ie depth and width of profile shall be acceptable but no extra payment on this account shall be made. (ii)During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,similar wall tile,floor tile etc and as per site requirement &No Extra payment will be paid for this. |
| 26 | Ditto as per item No 31 but Frame size 65 x 100 mm Single rebate. |
| 27 | S&F For 28-30 mm thick prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100 % lead free single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture with density not less than 650 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified. |
| 28 | S&F For 28-30 mm thick prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100 % lead free single extruded side with wood grain texture with density not less than 650 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified. |
| 29 | M&L for Wooden cabinet for above kitchen Platform having following details :- (i) The shutters should be 18 mm thick Factary made 100 % solid wood plastic composite (WPC) flush type shutter one side laminated of panel of PVC profile of 18 mm (+ 0.70 mm) thick of density 600 kg per cum manufactured by ISO -9000 Certified Campany. the Thickness of shutter in edges painted by matching colour PVC lining of plain/prelim coloured PVC Sheet using etc. fixed with screws as in cup board shutters/ shelves incl providing horizontal shelves complete all as specified & directed by Engr-in-Charge. (ii) M&L SS fancy type handles 150 mm for Cabinet shutter, Qty-01 handle per shutter . (iii) M&L for Auto hinges / SS Telescopic hinges / L hinge 75 mm length hinge for door shutter & shutters of SS ISI mark qty-2 hinge per shutter. (iv) M&L for magnetic door lock for Cabinet door shutters, Qty No 1 per shutter. (v) All SS Item should have grade 304. (vi) for measurement taken front elevation Area only and Width = 0.45 m taken from wall side. |
| 30 | M & L for making Wooden cabinet below kitchen platform with following details :- (i) The cabinet should have frame work of 2nd class hard wood fillets having sectional area n.exc 3 sqm cm . (ii) The shutters should be 18 mm thick Factary made 100 % solid wood plastic composite (WPC) flush type shutter one side laminated of panel of PVC profile of 18 mm (+ 0.70 mm) thick of density 600 kg per cum manufactured by ISO -9000 Certified Campany. the Thickness of shutter in edges painted by matching colour PVC lining of plain/prelim coloured PVC Sheet using etc.fixed with screws as in cup board shutters/ shelves incl providing horizontal shelves complete all as specified & directed by Engr-in-Charge. (iii) M&L SS fancy type handles 150 mm for Cabinet shutter,Qty-01 handle per shutter. (iv) M&L for Auto hinges / SS Telescopic hinges / L hinge 75 mm length hinge for door shutter & shutters of SS ISI mark qty-2 hinge per shutter. (v) M&L for magnetic door lock for Cabinet door shutters, Qty No 1 per shutter. (vi) All SS Item should have grade 304. (vii) for measurement taken front elevation area in Sqm only. |
| 31 | S&F in repair Brass Chromium plated Tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed. |
| 32 | Supply and fix Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 33 | S&F 100 mm long Stainless steel butt hinges grade 304, with mild steel hinge pin, bright polished and fixed complete all as specified and directed. |
| 34 | S&F 75 mm long Stainless steel butt hinges grade 304, with mild steel hinge pin, bright polished and fixed complete all as specified and directed. |
| 35 | S&F 150 mm size Stainless Steel barrel tower bolts grade 304, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 36 | S&F 200 mm size long extruded Stainless Steel handles designer type grade 304, fabricated type polished etc completed and as directed . |
| 37 | S&F 150 mm size long Stainless Steel handles designer type grade 304, fabricated type polished etc completed and as directed . |
| 38 | Supply and fix Stainless steel Sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or stainless steel and fixed all as specified and directed. |
| 39 | S&F in repairs for 25 mm dia stainless steel Drapery curtain rod grade 304 with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed. |
| 40 | S&F steel work in tubular trusses, purlins, rafter, posts, gusset plates cleats etc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade all as specified and directed. |
| 41 | Material and labour for Aluminum powder coated (Thickness of powder coating not less than 50 micron) as in ventilators and window chowkat and shutter, cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections, including fixing sheet glass and necessary fittings complete, screws plugs, handle, tower bolt, stay hooks etc., all as specified and directed. Notes : (i) Weight of aluminium sections shall only be measured.(ii) frosted glass will be measured and paid separately under supply only item 60. (ii) Wiremess will be measured and paid separately under supply only item 32. |
| 42 | Supply and fixing powder coated (minimum thickness of powder coating 50 micron) aluminium shutters for windows (sliding/openable) including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.(aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required) including cleat angle, aluminium snap beading for glazing/paneling, CP brass/stainless steel screws complete as per drawings complete all as specified and as directed.NOTE :- (i) The rate shall be deemed to include sliding arrangement for sliding window including locking arrangement. (ii) tinted glass will be measured and paid separately under supply only item 59. (iii) Wiremess will be measured and paid separately under supply only item 32. |
| 43 | Material and labour for providing Aluminium powder coated (Thickness of powder coating not less than 50 micron) door shutter with Powder coated frame 65 mm X 50 mm X 1.60 mm thick fixed with hinge and shutter with top rail, middle rail and bottom rail and style of size 85 mm x 44 mm x 1.60 mm thick with 200 mm size Aluminium handle on both sides of shutters, aluminium tower bolt 150 mm long 01 Nos per leaf,including 5.5 mm thick selected quality tinted glass panel in upper and lower poertion of door, joining cleats, rubber packing, aluminium beading, screws, Hydraulic door closer -01 for each leaf, 01 No Mortice lock 4 levers with two keys for each shutter, 3 Nos butt hinges of stainless steel for each shutter, provision of 8 mm dia through bolt with nuts on both side for top and bottom rail etc complete all as specified and as directed. |
| 44 | S&F in repair factory made 100% solid wood plastic composite (WPC) flush type shutter of 18 mm thickness one side laminate of panel of PVC profile of 18 mm (+0.70 mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18 mm thick and fixed with frame.The thickness of shuuter in edges painted by matching colour PVC lining of plain/prelim coloured PVC sheet using etc. as in cub borads, kitchen cabinet shutter,shelves etc,complete as per manufacture specification all as specified and directed. Make: ECHON/Sintex/Rajshree/Navratan. |
| 45 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an Colour having tensile strength of 550 Mpa & AZ Value 150 as in roof Overing/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 46 | M&L for 20-25 mm thick pre-polish Machine cut kota stone slab flooring over 15mm thick cement screed base in CM 1:6 laid and jointed in neat cement slurry with pigment to match the shade of slab including 25 mm thick type B-1,1:2:4 leveling course, rubbing & polishing complete all as specified and as directed. |
| 47 | Material and labour for 20-25 mm thick Pre-polish machine cut kota stone slab in landings/ passages/riser & treads of stair case, steps etc, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, edges rounded with two line grooves in each tread of steps, laid over and including cement screed base 15 mm thick in cm 1:6, complete all as specified and directed. Note: Kota stone to be used for treads and risers of stair case shall be in single piece. |
| 48 | M&L for Full Body Vitrified tiles 8-10 mm thick (square/Ractangular) polished area of each tiles exc 0.36 sqm but n exc 0.54 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade, over and including 15mm thick cement screed bed in cement mortar 1:6 Complete all as specified and as directed. |
| 49 | All as per item No.48, but as in skirting including cutting of tiles as required size over 10mm thick plaster in CM 1:4 Complete all as specified and as directed. |
| 50 | M&L for coloured Anti skid ceramic tiles 7 to 10 mm thick (square/Ractangular) area of each tiles exc 0.16 sqm but n exc 0.36 sqm as in floors etc., laid over and including 15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 51 | M&L Glazed ceramic coloured tiles in vertical surface 600X300 mm and 7-10 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in Cement Mortar 1:4 complete all as specified and directed. |
| 52 | Material and labour for Machine cut cudappah stone slab 20-25mm thick, laid over and including 15 mm thick Cement screed base in cm 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 53 | M&L for 75 mm thick cement concrete (1:3:6) type B-2 using 40 mm thick graded stone aggregate as in plinth protection,floor,paving etc. laid in alternate bays n exc 2.5m length finished even & fair and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 54 | M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in bedding layer of floor finished the surface even and rough complete all as specified and directed. |
| 55 | M&L for Providing cement slurry @ 3Kg per sqm on existing roof surface before laying PCC/ Plaster Complete all as specified and directed by Engineer-in-charge. |
| 56 | M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge. Note:- Supply only water proofing compound shall be measured and paid separately under item No-21. |
| 57 | M&L for rendering 10mm thick internal surfaces in cement mortar 1:6 on fair faces of brick work or Concrete surfaces finished even and fair without using extra cement all as specified and as directed. |
| 58 | M&L for 15mm thick rendering on brick/concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick/concrete surface in patch work in CM 1:4 and finishing fair and even without using extra cement with using 2% Integral water proofing compound by wt of cement . Note: (1) Water proofing compound will be measured and paid separately under relevant item No-20. (2) The rate quoted shall be deemed to include for work up to four storey building and height upto 10.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible. |
| 59 | Supply only 4 mm thick sheet glass,selected quality (tinted) cut to sizes exceeding 0.50 Sqm each pane. |
| 60 | Supply only 3 mm thick sheet glass selected quality (frosted) cut to sizes for louvers n exc 0.50 Sqm each pane & extra over sheet, ordinary quality, if sheet glass is ground or obscured or frosted on one side complete all as specified and directed. |
| 61 | M&L for Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide /zinc chrome primer complete all as specified and directed. |
| 62 | M&L for preparing old steel surfaces of any description width or girth exc 10 cm applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome all as specified and directed. |
| 63 | Supply and fix 40 mm dia low density polyethylene (LDPE) pipes of pressure rating 6Kg/Sq. cm laid in floor or fixed to walls all as specified and as directed. |
| 64 | Supplying & Laying of 15 mm outer dia CPVC pipes with SDR 11 and Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note :- Rate inclusive of chase cutting in stone/brick masonary of concealed tubing in Cement mortor 1:3. |
| 65 | Supplying & Laying of 20 mm outer dia CPVC pipes with SDR 11 and Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note :- Rate inclusive of chase cutting in stone/brick masonary of concealed tubing Iin cement mortor 1:3. |
| 66 | M&L for complete removal of existing treatment of wall / ceiling / chajja by scrapping with mechanical trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete by skilled labour complete all as directed.Note : After Completion of Removal existing surface Approved of Engr -in- charge and GE shall be Taken before appling further finshing . |
| 67 | M&L for applying two coats of Oil bound distemper paint over one coat of primer on Old plastered Interior surfaces of wall/ceiling/chajja and including 1.5 mm thick wall careputty in two layer and also filling cracks, holes etc complete by skilled labour complete all as directed.Note : (i) Rate quoted shall be deemed to be included for scaffolding up to 5 mtr height building. |
| 68 | M&L for applying two coats of Exterior acrylic emulsion Weather coat Anti Fungal paint on Old External wall surfaces in camouflage pattern as approved by GE over one coat of Primer including provision of scaffolding, ladders, cradles etc and also filling cracks, holes etc. required for the treatment to external surfaces of building with required safety measures etc complete all as specified and directed.by Enginner-in-Charge. Note: Rate quoted shall be deemed to be included for scaffolding up to 12 mtr height building. |
| 69 | S&F Rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water storage tank of any description all as directed. |
| 70 | S&F Rotational moulded polyethylene water storage tanks three layers of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water storage tank of any description all as directed. |
| 71 | S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and directed. |
| 72 | S&F in repairs 25 mm bore Gun Metal globe or gate valve, with iron wheel head, Screwed both ends for iron pipe and fixed complete all as directed. |
| 73 | S&F for 20 mm bore Ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE. |
| 74 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 450mm Complete all as specified and as directed by Engineer-In-Charge. |
| 75 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron strays, including bolts and nuts and securing ends of strays to wall or roof complete all as directed. |
| 76 | S&F 110 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as directed. |
| 77 | S&F 110 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints fiexed to Walls complete all as directed. |
| 78 | S&F 75 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in floors complete all as directed. |
| 79 | S&F 110 mm dia PVC ( SWR) bends any radius diminishing pieces or tapers Complete all as directed. |
| 80 | S&F 110 mm bore dia PVC (SWR) Junction single (Single T) equal or unequal fixed Complete all as directed. |
| 81 | S&F 110 mm bore dia PVC (SWR) vent cowl complete all as directed. |
| 82 | S&F for 'P' Trap 110 mm dia PVC(SWR) Pipe fixed with Water closet complete all as specified and directed by engr in charge. |
| 83 | S&F in repair Coloured Vitreous china wash down water closet pan (pedastal pattern), including white PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device, connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stopper etc. complete all as specified and directed. |
| 84 | Supply and fix in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle , PVC Flush Pipe and brackets including taking down old cistern all as specified and as directed. |
| 85 | S&F in repairs vitreous china half stall urinal (White) with grating & union for discharge pipe including providing and fixing CP pipe for spreader and CP push cock etc complete all as specified & as directed. |
| 86 | S&F in repair Vitreous China wash basin (WHB), white, flat back, size 450x300mm excluding taps and plug but including Angle Iron brackets, 32 mm dia CP waste coupling, 32mm bore PVC Waste Pipe complete all as specified and directed. |
| 87 | S&F in repair For Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 88 | S&F in repair bib taps with falnge of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Complete all as specified and as directed by Engineer-In-Charge. |
| 89 | S&F in repair 2 in1 bib taps with falnge of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule and Including taking down old CP Bib tap/ 2 in1 bib tap complete all as specified and as directed by Engineer-In-Charge. |
| 90 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1 to 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and as directed by engr in charge. |
| 91 | S&F in repair Brass CP 3 in 1 Wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed and joint with adhesive, taflon tape, etc and including Hand shower complete all as specified and directed. Note : Rate Inclusive for Overhead Shower Rose. |
| 92 | S&F in repair over head shower with shower arm of size 150mmx150mm square shape ABS body, chromium plated with gray face plate with rubit cleaning system. |
| 93 | S&F in repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head ,Complete all as specified and as directed by Engineer-In-Charge. |
| 94 | S&F 110 mm dia PVC Floor Trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as directed. |
| 95 | S&F in repair 450 mm x 600 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to woodden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 96 | S&F in repair fency type soap dish stainless steel as appoved by GE complete all as specified and as directed by engineer-in-charge. |
| 97 | S&F for glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide and 600 mm long with chromium pleted bracket guard and railing make prayag or equivalent complete all as directed. |
| 98 | M&L For 4 mm thick Coloured Aluminium composite panels (ACP) sheet for outdoor use fixed to walls/cladding/facades/canopices in any geometrical pattern/shape, coloumn projections, chajjas, elevations or in any other position as approved Colour and make by engineer in charge, including all materials such as MS hollow rectangular section 19 gauge and 2.5 inches and fixing at 1-2 feet c/c for base framing including scaffolding for working upto 6 meters. The ACP Sheet shall be fixed above the MS frame/battens to the walls/column /facias with necessary clamps,brackets,anchor fasteners, weather sealents using silicon, gasket,forms,fixtures & others fastenings items like strips, nuts, bolts, rivets,washers,fabrication etc.Complete all as specified and as directed. Make: Arrowbond/Viva/Aistone/Crossbond/Eurobond/Pioneer of Sand series/ Wooden Finish or equivalent as approved. Note: (i) Rate included for the MS frame/battens to the walls/column /facias with necessary clamps,brackets,anchor fasteners, weather sealents using silicon, gasket,forms,fixtures & others fastenings items like strips, nuts, bolts, rivets,washers,fabrication etc. no extra paid seperately. (ii)All safety measures ensure by contractar up to 10.0 m height & no extra paid seperately. |
| 99 | M&L for Taking down existing copper/aluminum point wiring (light/ fan/ socket or power points) complete including (fittings such as switches, ceiling roses, pendents, regulators, sockets, Light fitting etc including wooden battens /casing /capping and conduit etc and making good disturbed surface of walls, ceilings and floors etc. complete all as specified & as directed by Engineer-in-Charge. |
| 100 | M&L for Taking down carefully sub main wiring including all accessories without disturbing existing wiring fittings fixture site and making good to the disturbed surfaces all as directed and as specified in any type and size. |
| 101 | M&L for Taking down main switch, DB(along with MCCB/,MCB), and electric Meter etc all as directed. |
| 102 | Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including new heavy grade PVC rigid conduits 20mm or higher dia as reqd at site, totally concealed in walls / floors / ceiling etc ; by means of saddles and clips etc; including all conduit accessories / fittings / junction boxes / inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes factory made 16 SWG pressed steel housing, totally concealed in walls with 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cup washers, for mounting of switches, sockets including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light /fan / call bell point controlled by one switch |
| 103 | (b) One 3 pin socket point 5/6 Amp on independent board |
| 104 | (c) One 3 pin socket point 5/6 Amp on same board with other switches. |
| 105 | All as per item No 102 here-in-before with 2.5 sq mm size cable, for one 6 pin 5/15 Amps socket outlet on independent board. Please Enable Macros to View BoQ information |
| 106 | All as per item No 102 here-in-before with 2.5 sq mm size cable, for one 6 pin 5/15 Amps socket outlet on independent board. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Aug 24, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender