Tender For Provision Of Footpath For Pedestrians In Common Facility Area At Nad Karwar And Addition/ Alteration And Replacement Of All Glass Window With Upvc Windows Of Mcpo/ Cpos Buildings (P-06 And P-07) At Kadamba Vanam, Naval Base Area, Karwar.
Tender Value
47.20 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
18 days left
EMD
94400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Footpath For Pedestrians In Common Facility Area At Nad Karwar And Addition/ Alteration And Replacement Of All Glass Window With Upvc Windows Of Mcpo/ Cpos Buildings (P-06 And P-07) At Kadamba Vanam, Naval Base Area, Karwar.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil. |
| 2 | Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr depth for foundation etc. n.exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified & directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed |
| 4 | Removing excavated material (soil) n.exc 50 m and depositing where directed at a level 1.5 m above starting point all as directed by Engineer-in-Charge |
| 5 | M&L for hard core of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 25 cm, watered & rammed to true surface with broken stone/boulders complete all as specified |
| 6 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundation and mass concrete filling complete all as specified and directed |
| 7 | M&L for precast cement concrete block 1:3:6 type C1 using 20 mm graded stone aggregate masonry with solid block exc 10 cm width and setting in cement mortar 1:6 complete all as specified |
| 8 | M&L for crushed stone sand/river sand cushioning layer below paver tiles, well compacted to true surface complete all as specified and directed. |
| 9 | M&L for machine pressed precast concrete interlocking paver block, glossy finish with pigment conforming to IS 15658:2006, 60 mm thick, M-35 grade, size and pattern as directed, laid dry using grey cement. |
| 10 | M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping slightly rounded on edges complete all as specified and directed. |
| 11 | M&L for 15 mm thick rendering on fair faces of brick surfaces in CM 1:4 finished even and smooth without extra cement complete all as specified and directed. |
| 12 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over one coat of white cement primer on walls complete all as specified and directed. |
| 13 | Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) including making good disturbed portion to match the adjoining surfaces etc complete all as specified and as directed. |
| 14 | All as per Item No.13 above but n.exc 1.5 sqm etc complete all as specified and as directed. |
| 15 | Providing and fixing factory made uPVC white colour Sliding window three track, area exc 2 Sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm), sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 16 | Providing and fixing factory made uPVC white colour Sliding window Three track area n exc 2.00Sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 17 | S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed to UPVC windows/ventilator etc complete all as specified and directed. |
| 18 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to existing frame with Cp brass stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 19 | M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including necessary scaffolding and safety measures as required etc complete all as specified and directed. |
| 20 | M&L for preparation of new plastered / decorated wall surfaces including applying a coat of 1mm thk wall care putty on new surfaces and applying two coat of Acrylic washable distemper using mechanical spray (maximum working pressure of 3300 PSI) over a coat of alkaline resistant primer including necessary scaffolding and safety measures as required etc complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender