Tender For Repair & Polishing Of Wooden Furniture And Recanning Of Different Type Of Chairs Map Af Stn Palam Under Ge (Af) Palam Delhi Cantt - 10
Tender Value
30 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Polishing Of Wooden Furniture And Recanning Of Different Type Of Chairs Map Af Stn Palam Under Ge (Af) Palam Delhi Cantt - 10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2026 | CORRIGENDUM NO 1 | BOQ | 15-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Chair Dining (FD-228, 279) S&F rear leg for Chair Dining made out from seasoned teak wood wrought face duly polished to match the existing chair including taking out old rear leg of any description all as specified in drawings. |
| 2 | All as per item No 1 above but Front Leg |
| 3 | All as per item No 1 above but side rail |
| 4 | All as per item No 1 above but front or back rail |
| 5 | All as per item No 1 above but bottom stiffeners |
| 6 | All as per item No 1 above but back strip |
| 7 | All as per item No 1 above but bracket |
| 8 | All as per item No 1 above but Rubber /PVC shoes with steel plated screws |
| 9 | Re- canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge. |
| 10 | Chair dining PBOR(FD/MAP-II/04)S&F rear leg for Chair dining made out from seasoned, teak wood wrought face duly polished to match the existing chair including taking out old/unserviceable rear leg of any description complete. |
| 11 | All as per item No 10 above but Front Leg |
| 12 | All as per item No 10 above but Side rail |
| 13 | All as per item No 10 above but front or back rail |
| 14 | M&L in replacement of Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. |
| 15 | S&F in replacement of back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. |
| 16 | S&F in replacement of bracket triangular shape made of second class hard wood of size 75mmx75mmx25mm duly polished to match the existing Chair with 02 nos steel screws all as shown on drawing and as directed by Engr-in-Charge. |
| 17 | S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size including taking down existing worn out shoe complete. |
| 18 | Taking out of old u/s PVC seat and S&F new PVC seat as per drg duly fixing of wooden stiffener of 25mmx25 mm section to support PVC seat. Rest all as shown on drawing. |
| 19 | Chair Writing FD-202, 250, 280S&F rear leg for Chair Writing made out from seasoned, teak wood wrought face and including taking out old rear leg of any description complete all as shown on drawing, as specified and as directed by Engineer-in-Charge. |
| 20 | All as per item No 19 above but Front Leg |
| 21 | All as per item No 19 above but Side rail |
| 22 | All as per item No 19 above but front or back rail |
| 23 | All as per item No 19 above but bottom stiffeners |
| 24 | All as per item No 19 above but back strip |
| 25 | S&F in replacement of bracket triangular shape made of second class hard wood of size 75mmx75mmx25mm duly polished to match the existing Chair with 02 nos steel screws all as shown on drawing and as directed by Engr-in-Charge. |
| 26 | S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size including taking down existing worn out shoe complete. |
| 27 | Re-canning Re- canning of Chair Writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge. |
| 28 | Arms Rest: Taking down old u/s Arms Rest and S&F for New arm made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. |
| 29 | Chair Easy FD-229, 201S&F rear leg for Chair Easy made out from seasoned teak wood wrought face duly polished to match the existing chair including taking out old legs of any description complete all as specified in drawings and as directed by Engineer-in-Charge. |
| 30 | All as per item No 29 above but Front leg |
| 31 | All as per item No 29 above but side rails of seat |
| 32 | All as per item No 29 above but front or back rails of seat |
| 33 | All as per item No 29 above but side rail of back |
| 34 | All as per item No 29 above but bracket |
| 35 | All as per item No 29 above but top/ bottom rail of back. |
| 36 | All as per item No 29 above but front support rail. |
| 37 | S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size including taking down existing worn out shoe complete. |
| 38 | Arms Rest: Taking down old u/s Arms Rest and S&F for New arms rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. |
| 39 | Re-canning Re- canning of Chair Easy in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge. |
| 40 | Chair dining offrs(MAP)(FD/MAP-II/05 and FD-357)S&F rear leg for Chair Dining made out from seasoned, teak wood wrought face duly polished to match the existing chair including taking out old/unserviceable rear leg of any description complete. |
| 41 | All as per item No 40 above but Front Leg |
| 42 | All as per item No 40 above but Side rail |
| 43 | All as per item No 40 above but front or back rail |
| 44 | All as per item No 40 above but bottom stiffeners |
| 45 | All as per item No 40 above but back strip |
| 46 | S&F in replacement of bracket triangular shape made of second class hard wood of size 75mmx75mmx25mm duly polished to match the existing Chair with 02 nos steel screws all as shown on drawing and as directed by Engr-in-Charge. |
| 47 | S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size including taking down existing worn out shoe complete. |
| 48 | S&F for seat cushion 75 mm thick of 40 density complete with approved tapestry cloth all as shown on drawing and as directed by the Engr - in - Charge. Make - kurlon Gold or equivalent in Sleepwell . Rate of tapestry cloth should not be less than Rs 700/- per RM. |
| 49 | Bed Hard/ Bed newar (FD-246)S&F in replacement of Plywood top of 12 mm thick, BWR grade ,ISI Marked confirming to IS-303 fixed with suitable screws all as specified on drg and as directed by Engr-in-Charge. Make : Archidply Gold or equivalent in Century/ greenply in one piece. |
| 50 | S&F in replacement of long rail made out of teak wood rest all as per drg. |
| 51 | S&F in replacement of short rail made out of teak wood rest all as per drg. |
| 52 | S&F in replacement of leg made out of teak wood rest all as per drg. |
| 53 | S&F in replacement of worn out component of head board and provide frame of teak wood and Teak face ply one side and other side plywood BWR ISI Marked grade all as per drg. |
| 54 | All as per item No 49 above but foot board |
| 55 | S&F in replacement of plywood of head board with one side teak face ply BWR grade ISI Marked all as per drg. |
| 56 | All as per item No 49 above but foot board |
| 57 | S&F in replacement of old broken middle stiffener with new one made out second class hard wood all as per drg. |
| 58 | S &F clamp made out mild steel flat iron size 35 mm x 5 mm including two coats of synthetic enemel paint over a coat of redoxide primer for steel bent clamp for corner. |
| 59 | Chair Wooden Bottom (FD-56/285)S&F rear leg for Chair Wooden bottom made out from seasoned, wrought face teak wood duly polished to match the existing chair including taking out old rear leg of any description complete all as shown on drawing. |
| 60 | All as per item No 59 above but Front Leg |
| 61 | All as per item No 59 above but Side rail |
| 62 | S&F in replacement of Seat Frame made out of 12mm thick Plywood BWR grade ISI Marked complete all as specified in drg. |
| 63 | All as per item No 59 above but botton stiffener |
| 64 | All as per item No 59 above but back strip |
| 65 | S&F in replacement of bracket triangular shape made of second class hard wood of size 75mmx75mmx25mm duly polished to match the existing Chair with 02 nos steel screws all as shown on drawing and as directed by Engr-in-Charge. |
| 66 | M&L in replacement of shoes of hard PVC fo superior quality with steel screw to the legs all as specified and directed by Engr-in-Charge |
| 67 | Sofa Set 4 Seater (FD-373) S& F for front/ Rear leg of teak wood as per existing shape and size as specified in drawing including taking down old u/s lags. |
| 68 | All as per item No 67 above but side back/ front rail |
| 69 | All as per item No 67 above but batten for seat/ back |
| 70 | Taking down old U/S plywood of seat and back of sofa set 4 seater and S& F new 12mm thick BWR grade ISI marked plywood for seat and back as per existing shape and size as specified in drawing. |
| 71 | All as per item No 67 above but arms |
| 72 | Removing of existing U/S cushion from seat and back of sofa set 4 seater and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by Engr-in-Charge and as specified in drg. (Note : Rate of Tapestry cloth should not be less than Rs. 700.00 Per RM). |
| 73 | Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs. |
| 74 | Opening and taking out old unserviceable Cushion Cover size 21\\"x22\\"x4\\" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by Engr-in-Charge all as specified in drg and directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 700.00 Per RM). |
| 75 | Sofa Set 5 Seater (FD-373 & MAP-II/02) S& F for front/ Rear leg of teak wood as per existing shape and size as specified in drawing including taking down old u/s lags. |
| 76 | All as per item No 75 above but side back/ front rail |
| 77 | All as per item No 75 above but batten for seat/ back |
| 78 | Taking down old U/S plywood of seat and back of sofa set 5 seater and S& F new 12mm thick BWR grade ISI marked plywood for seat and back as per existing shape and size as specified in drawing. |
| 79 | All as per item No 75 above but arms |
| 80 | Removing of existing U/S cushion from seat and back of sofa set 5 seater and S & F new foam cushion 100 mm thick 32 density Make : Kurlon/sleepwel duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by Engr-in-Charge and as specified in drg. (Note : Rate of Tapestry cloth should not be less than Rs. 700.00 Per RM). |
| 81 | Taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs. |
| 82 | Opening and taking out old unserviceable Cushion Cover size 21\\"x22\\"x4\\" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by Engr-in-Charge all as specified in drg and directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 700.00 Per RM). |
| 83 | Stool Dressing cushion FD/MAP/14Taking down old U/S back side board of stool dressing and S& F new back made of 18 mm thick prelaminated MDF board as per existing shape and size all as specified in drawing. |
| 84 | Taking down old U/S front/side board of stool dressing and S& F new back made of 18 mm thick prelaminated MDF board as per existing shape and size all as specified in drawing. |
| 85 | Taking down old U/S top of stool dressing and S& F new back made of 12 mm thick plywood as per existing shape and size all as specified in drawing. |
| 86 | Taking down old U/S bottom of stool dressing and S& F new back made of 3 mm thick plywood as per existing shape and size all as specified in drawing. |
| 87 | Taking down old U/S wheel of stool dressing and S& F new wheel of size 50 mm as per existing shape and size all as specified in drawing. |
| 88 | Taking out existing U/S cushion from seat of sofa stool dressing and S & F new foam cushion 75 mm thick 32 density Make : Kurlon Gold line or quivelant in sleepwell duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge all as specified in drg (Note : Rate of Tapestry cloth should not be less than Rs. 700.00 Per RM) |
| 89 | Stool Dressing CB (FD/MAP/14) M&L for re-canning of Stool Dressing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning all as shown on drawing. |
| 90 | Taking out UNSV leg and S&F new leg made out of teak wood as per existing shape and size all as specified in the drg. |
| 91 | Taking out UNSV front rail and S&F new front rail made out of teak wood as per existing shape and size all as specified in the drg. |
| 92 | Table Dressing Ladies (MAP-07 and FD)Taking out old/worn out U/S mirror and S&F new mirror 5 mm thick mirror ( Make : MODI GUARD/ATUL) as per size shown on drg & directed . |
| 93 | Taking out UNSV back ply from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade all as specified in the drg. |
| 94 | Taking out UNSV top and S&F new top made out of 18 mm thick pre laminated MDF Board exterior grade all as specified in the drg. |
| 95 | Taking out UNSV bottom and S&F new Bootom made out of 12 mm thick plywood all as specified in the drg. |
| 96 | Taking out old worn out drawer from the table and new drawer made out of 18 mm thick perlaminated MDF board specified in the drg. |
| 97 | Taking out unservicable knob/handle from the table and S & F new CP knob/handle 40mm to suit to the drawer all as specified in the drg. |
| 98 | Taking down old U/S cushion and S& F new cushion 32 density and 75 mm thick complete with upholstry ( not less than Rs 500 /- per RM) as per existing shape and size all as specified in drawing. |
| 99 | Taking out old worn out shutter the table and S&F new shutter made out of 18 mm thick perlaminated MDF board specified in the drg. |
| 100 | S&F for removing old worn out sliding glass & aluminium channel and S&F new sliding glass with aluminium channel specified in the drg and as directed by Engr in Charge . |
| 101 | Table Bedside(FD-213) S&F for top/shelf made out of 18 mm thick pre laminated partical Board exterior grade including dismantling of existing top/shelf all as specified in the drg and as directed by Engr in Charge. |
| 102 | S&F for side made out of 18 mm thick pre laminated partical board exterior grade including dismantling of existing top/shelf all as specified in the drg. |
| 103 | S&F for back made out of 18 mm thick pre laminated partical board exterior grade including dismantling of existing back all as specified in the drg. |
| 104 | Table 900x900 (FD-223)S&F for top made out of 18 mm thick pre laminated postforming MDF Board exterior grade all as specified in the drg including dismantling of existing top. |
| 105 | S&F for leg made out of teak wood as per existing shape and size all as specified in the drg including dismantling of existing leg. |
| 106 | S&F for front/side rail made out of teak wood as per existing shape and size all as specified in the drg including dismantling of existing rail. |
| 107 | S&F in replacement bracket triangular shape made of 2nd class hard wood of size 75mmx75mmx25mm duly polished to match the existing Chair with 02 nos steel screws all as shown on drawing. |
| 108 | Table Officer officer woodenTaking out UNSV top and S&F new top made out of 18 mm thick postforming MDF Board exterior grade all as specified in the drg. |
| 109 | Taking out UNSV leg and S&F new leg made out of teak wood as per existing shape and size all as specified in the drg. |
| 110 | S&F for long rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 111 | S&F for short rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 112 | Taking out old worn out drawer from the table and S&F new drawer made out of teak wood as specified in the drg. |
| 113 | Taking out old worn out shutter the table and S&F new shutter made out of 18 mm thick perlaminated MDF board specified in the drg. |
| 114 | Taking down old u/s bottom stiffener and S&F for New stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg. |
| 115 | Taking down old u/s bracket and S&F for bracket made out of teak wood duly polished to match the existing Chair all as specified in drg. |
| 116 | S & F in replacement rubber shoe of superior quanlity with steel plated screws of suitable size complete. |
| 117 | Taking out unservicable knob/handle from the table and S & F new CP knob/handle 40mm to suit to the drawer all as specified in the drg and as directed by Engr in Charge. |
| 118 | Table Office clerk WoodenTaking out UNSV top and S&F new top made out of 18 mm thick postforming MDF Board exterior grade all as specified in the drg. |
| 119 | S&F for leg made out of well seasoned teak wood including dismantling of existing leg complete. |
| 120 | S&F for long rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 121 | S&F for short rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 122 | Taking out old worn out drawer from the table and S&F new drawer made out of teak wood as specified in the drg. |
| 123 | Taking out old worn out shutter the table and S&F new shutter made out of 18 mm thick perlaminated MDF board specified in the drg. |
| 124 | Taking down old u/s bottom stiffner and S&F new stiffner made out of teak wood duly polished to match the existing all as specified in drg. |
| 125 | Taking down old u/s bracket and S&F for bracket made out of teak wood duly polished to match the existing Chair all as specified in drg. |
| 126 | S & F in replacement rubber shoe of superior quanlity with steel plated screws of suitable size complete. |
| 127 | Taking out unservicable knob/handle from the table and S & F new CP knob/handle 40mm to suit to the drawer all as specified in the drg and as directed by Engr in Charge. |
| 128 | Side Board (FD-241, FD-371, FD/MAP/09)Taking down old u/s top and S&F for new top made out of postforming 18/19mm thick MDF Board Exterior grade complete. |
| 129 | S&F for leg made out of well seasoned teak wood including dismantling of existing leg complete. |
| 130 | S&F for long rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 131 | S&F for short rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 132 | Taking out worn out shutter and S&F new shutter made out of 18/19 mm Prelaminated Particle board exterior grade duly edging 5 mm thick teak wood beading all as per drg . |
| 133 | Taking out old worn out drawer from the table and new drawer made out of teak wood as specified in the drg. |
| 134 | Taking out old u/s Side LT/RT and S&F for New Side LT/RT made out of 18/19mm Prelaminated Particle Board Exterior grade complete. |
| 135 | Taking out old worn out Back from the Side Board and new Back made out of 6mm Plywood commercial BWR grade all as specified in the drg. |
| 136 | Taking out old worn out knob/handle from the drawer of the table and S&F new knob/handle of best quality approved by GE/Engr-in-Charge. |
| 137 | Bin Soiled Linen (FD-244,15 (M) FD-212)Taking out old worn out top and new top made out of postforming 18/19 mm thick MDF board exterior grade all as specified in drg. |
| 138 | Taking out old worn out bottom from bins, S&F new Bottom made out of second class all as specified in drg. |
| 139 | Taking out old worn out back of the bins and new made out of 6 mm thick commercial plywood BWR Grade. all as specified in drg. |
| 140 | M&L for side left/ right canning of Bin in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning all as shown on drawing . |
| 141 | S&F in replacement of hinges ISI Marked size 75mm complete all as specified in drg. |
| 142 | Table dressing Gents (FD-230/31,378) S&F in replacement of looking mirror 5mm thick superior quality make saint Gobin/Modigaurd complete as per drg. |
| 143 | Taking out back ply of mirror and S&F of new ply wood BWR grade 6mm thick all as per drg. |
| 144 | Taking out unserviceable top table dressing gents and supply and fixing of new top made out of pre-laminated particle board 18mm exterior grade all as per drg. |
| 145 | Taking out unserviceable bottom table dressing gents and supply and fixing of new bottom made out of pre-laminated particle board 18mm exterior grade all as per drg. |
| 146 | S&F for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge . |
| 147 | S&F for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer all as specified in the drg and as directed by Engr in Charge. |
| 148 | Table dressing Gents (FD/E6/MAP) S&F in replacement of looking mirror 5mm thick superior quality make Saint Gobin/Modigaurd complete as per drg. |
| 149 | S & F back ply of mirror complete with 9 mm thick ply wood and wooden frame including dismantling of existing back all as specified in the drg |
| 150 | S&F glass shelves made out of 5 mm thick plain glass duly round edges including dismantling of existing shelves all as specified in the drg |
| 151 | S&F base support (set of 02 Nos) for table dressing gents made out of 2nd class hard wood including dismantling of base. |
| 152 | Taking down UNSV side/top frame of the table dressing mirror and S&F new frame made out of 18 mm thick pre laminated particle board exterior grade all as specified in the drg. |
| 153 | Table writing (FD-249, FD-275, FD-33(M))S&F for top made out of 18/19 mm thick postforming prelaminated MDF board exterior grade all as specfication in drg including dismantling of existing top. |
| 154 | S&F for leg made out of second class hard wood including dismantling of existing leg complete.. |
| 155 | S&F for long rail made out of second class hard wood including dismantling of existing rail complete.. |
| 156 | S&F for short rail made out of second class hard wood including dismantling of existing rail complete. |
| 157 | S&F for central stiffener made out of 2nd class HW including dismantling of existing stiffener complete. |
| 158 | S&F for drawer made out of well seasoned teak wood including dismantling of existing drawer complete. |
| 159 | Taking out old u/s store box (back) with 6mm thick (BWR) commercial ply. |
| 160 | Taking out old u/s store box (side) and S&F 19mm thick block board teak veneer finish (one side). |
| 161 | S&F for leg made out of second class hard wood including dismantling of existing leg complete.. |
| 162 | S&F shutter made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mm teak wood beading all around the top including dismantling of existing shutters complete.. |
| 163 | Taking out old u/s bracket and fixing of bracket. |
| 164 | S&F for shoes of hard PVC fo superior quality with steel screw to the legs including taking out u/s shoe. |
| 165 | S&F for knob / handle including taking out u/s knob / handle. |
| 166 | Teapoy (FD-34,232,278,382)S&F for top made out of 18/19 mm thick postforming prelaminated MDF board exterior grade all as per specfication in drg including dismatling of existing top. |
| 167 | S&F for long rail made out of well seasoned teak wood including dismatling of existing rail. |
| 168 | S&F for short rail made out of well seasoned teak wood including dismatling of existing rail. |
| 169 | S&F for stiffener made out of well seasoned teak wood complete including dismatling of existing one. |
| 170 | S&F for leg made out of well seasoned teak wood including dismatling of existing rail. |
| 171 | S&F for stiffener made out of well seasoned teak wood including dismatling of existing stiffener. |
| 172 | S&F for shoes of hard PVC fo superior quality with steel screw to the legs including taking out u/s shoe. |
| 173 | Table Center (FD-274 & 235) Taking out unserviceable top of table centre and S&F of new top of post forming pre-laminated MDF board 18/19mm thick exterior grade all as per drg. |
| 174 | Taking out unserviceable long rail and S&F of new long rail of seasoned, teak wood wrought face complete all as shown on drawing. |
| 175 | Taking out unserviceable short rail and S&F of new short rail of seasoned, teak wood wrought face complete all as shown on drawing. |
| 176 | S&F in replacement of Stiffener made out of well seasoned teak wood complete. |
| 177 | S&F leg for Table Centre made out from seasoned, teak wood wrought face including taking out old leg of any description complete all as shown on drawing. |
| 178 | S&F in replacement of shoes of hard PVC fo superior quality with steel screw to the legs all as specified and directed by Engr-in-Charge |
| 179 | S&F bracket of Table Centre made out from seasoned, teak wood wrought face including taking out old bracket of any description complete all as shown on drawing. |
| 180 | Peg Table (FD-226,384)S&F in replacement of top made out of 18/19 mm thick postforming prelaminated MFD board exterior grade all as per drg. |
| 181 | S&F for long rail made out of well seasoned teak wood including dismatling of existing rail. |
| 182 | S&F for short rail made out of well seasoned teak wood including dismatling of existing rail. |
| 183 | S&F for stiffener made out of well seasoned teak wood complete including dismatling of existing one. |
| 184 | S&F for leg made out of well seasoned teak wood including dismatling of existing rail. |
| 185 | S&F for shoes of hard PVC fo superior quality with steel screw to the legs including taking out u/s shoe. |
| 186 | S&F for bracket made out of well seasoned teak wood including dismatling of existing bracket. |
| 187 | Table Dining 6 Persons (FD-273, 329, MAP-03) S&F for top made out of 18/19 mm thick postforming prelaminated MDF board exterior grade all as specfication in drg including dismantling of existing top. |
| 188 | S&F for long rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 189 | S&F for Short Rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 190 | S&F for Leg made out of well seasoned teak wood including dismantling of existing leg complete. |
| 191 | S&F for shoes of hard PVC fo superior quality with steel screw to the legs including taking out u/s shoe. |
| 192 | S&F in replacement bracket triangular shape made of 2nd class hard wood of size 75mmx75mmx25mm duly polished to match the existing Chair with 02 nos steel screws all as shown on drawing. |
| 193 | Table 3'X2' With / without Drawer (FD-231/ 223/283/284)Taking out U/S top from the table and S&F new top made out of 18/19 mm thick postforming prelaminated MDF board exterior grade all as specfication in drg. |
| 194 | S&F for long rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 195 | S&F for short rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 196 | S&F for stiffners made out of well seasoned teak wood including dismantling of existing stiffners complete. |
| 197 | S&F for leg made out of well seasoned teak wood including dismantling of existing leg complete. |
| 198 | Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC fo superior quality with steel screw to the legs. |
| 199 | Taking out U/S old broken drawer and S&F new made out of 6mm plywood commercial BWR grade all as per specification given in the drawing. |
| 200 | S&F for bracket triangular shape made of 2nd class hard wood of size 75mmx75mmx25mm duly polished to match the existing Chair with 02 nos steel screws all as shown on drawing including dismantling of existing bracket. |
| 201 | Table dining 1200x 900 (FD/MAP-II/03)Taking out U/S top from the table and S&F new top made out of 18/19 mm thick postforming prelaminated MDF board exterior grade all as specfication in drg. |
| 202 | S&F for long rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 203 | S&F for short rail made out of well seasoned teak wood including dismantling of existing rail complete. |
| 204 | S&F for leg made out of well seasoned teak wood including dismantling of existing leg complete. |
| 205 | Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC fo superior quality with steel screw to the legs. |
| 206 | S&F for bracket triangular shape made of 2nd class hard wood of size 75mmx75mmx25mm duly polished to match the existing Chair with 02 nos steel screws all as shown on drawing including dismantling of existing bracket. |
| 207 | Locker Bed Side wooden (FD-54)S&F new top including taking out unserviceable old top of any description complete all as specified and as directed. |
| 208 | S&F new door made out of teak wood frame and made to shape and size as shown on drawing including necessary preperation of surfaces including taking out unserviceable door complete. |
| 209 | S&F of new hasp and staple including taking out unserviceable one complete. |
| 210 | S&F of new hinge including taking out unserviceable hinge complete. |
| 211 | S&F new back and including taking out unserviceable back complete. |
| 212 | S&F aluminium HANDLE including taking out unserviceable Handle. |
| 213 | Sofa set 5 /4/3 /single seater (TP)Taking out of unserviceable cushion, foam, coir, cotton, spring and tapestry of SOFA THREE SEATER (comprising of one 3 seater) of various trade pattern brands and S&F complete cushion, foam ,coir, cotton, spring and tapestry as approved and directed . (Note : Cost of tapestry cloth/leatherite shall not be less than Rs 700 per meter). |
| 214 | Taking out of unserviceable cushion , foam , coir , cotton , spring and tapestry of SOFA SINGLE SEATER (comprising of one single seater) of various trade pattern brands and S&F complete cushion, foam ,coir, cotton, spring and tapestry as approved and directed . (Note : Cost of tapestry cloth/leatherite shall not be less than Rs 700 per meter). |
| 215 | Taking out of unserviceable tapestry of SOFA THREE SEATER (comprising of one 3 seater) of various trade pattern brands and S&F complete tapestry as approved and directed . (Note : Cost of tapestry cloth/leatherite shall not be less than Rs 700 per meter). |
| 216 | Taking out of unserviceable tapestry of SOFA SINGLE SEATER (comprising of one single seater) of various trade pattern brands and S&F complete tapestry as approved and directed . (Note : Cost of tapestry cloth/leatherite shall not be less than Rs 700 per meter). |
| 217 | HAT STAND (FD-233) Mirror :- Removing of old/worn out U/S mirror and S&F for fixing new mirror 5 mm thick mirror ( Make : MODI GUARD/ATUL) as per size shown on drg & directed . |
| 218 | Peg : Removing UNSV peg of the Hat Stand and S & F new Peg to match the existing pegs. Rest all as specified in the drg and as directed by Engr in Charge. |
| 219 | Beading : Removing UNSV beading and S&F 4 mm thick teak wood beading of suitable width all arount the Hat Stand. Rest all as specified in the drg and as directed by Engr in Charge. |
| 220 | M&L for polishing of furniture with approved quality french polish glossy finish including preparation of surfaces such as scrapping of rough surface and old worn out polished layer with scrapper /sand paper/grinder machine for smoothing the surface etc all as specified and directed by the Engineer-in-charge of following furniture :- Chair dining (FD-279/203/16/262) |
| 221 | Chair Dining PBOR FD/MAP-II/04 |
| 222 | Chair Writing FD-20/202/250/280 |
| 223 | Chair Easy FD-229/201/17 |
| 224 | Chair Dining Officer |
| 225 | Chair WB FD-26/225/285 |
| 226 | Hard Bed FD-246/245/247 |
| 227 | Sof Set 4 Seater FD-281 |
| 228 | Sofa Set 5 Seater FD-281 |
| 229 | Stool Dressing MAP FD/MAP/14 |
| 230 | Stool Dressing CB |
| 231 | Table Dressing Ladies FD/MAP/07 |
| 232 | Table Bed Side FD-213 |
| 233 | Table 3'x3' FD-223 |
| 234 | Table Office Officer Wooden |
| 235 | Table Office Clk Wooden |
| 236 | Side Board FD-241/26 |
| 237 | Bin Soiled Linen FD-244/15(M)/212 |
| 238 | Table Dressing Gents FD-230/231 |
| 239 | Table Dressing Gents FD/E6/MAP |
| 240 | Table Writing FD-249/275/33(M) |
| 241 | Teapoy FD-232/278 |
| 242 | Table Centre FD-235/274 |
| 243 | Table Peg FD-236/277 |
| 244 | Table Dining 6 Persong FD-273/329 |
| 245 | Table Dining 1200 x 900 MM FD/MAP-II/03 |
| 246 | Table 3' x 2' with and without Drawer FD-231/223/283/284 |
| 247 | Hat Stand |
| 248 | Locker bed side wooden M&L Junction box outdoor in replacement type, 3 phase 415 Volts of size 350x250x150 mm made out of hot press moulded SMC front openable hinged type including 4 Nos. Al bus bars mounted on insulators heavy duty of rating 32 Amps with necessary fixing arrangements to pole with MS calmps, nuts, bolts etc of size 25 x 4 mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Make : Sintex/Hensel/L&T Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender