Tender For Welcome Maintenance, Repair/Replacement To Doors, Windows, Ventilators, Cupboards And Other Misc Joinery Works At Af Stn Faridabad Under Aor Of Ge (Af) Faridabad
Tender Value
45 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
12 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance, Repair/Replacement To Doors, Windows, Ventilators, Cupboards And Other Misc Joinery Works At Af Stn Faridabad Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls complete all as specified and as directed. |
| 2 | All as per item No 01 above but on ceilings. |
| 3 | M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1mm thick complete all as specified and as directed. |
| 4 | M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bound distemper complete all as specified and as directed. |
| 5 | M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bound distemper complete all as specified and as directed. |
| 6 | M & L for applying one coat of wall care putty 3mm thick on wall surfaces complete all as specified and as directed. |
| 7 | M&L for one coat of cement base paint on old decorated plastered surfaces of wall including washing rubbing down stopping & preparation of surfaces complete all as specified and as directed. |
| 8 | M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and as directed. |
| 9 | All as per item No 08 above but on Wooden surfaces. |
| 10 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed. |
| 11 | M&L, Rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and as directed. |
| 12 | Supply only integral water proofing compound conforming to IS-2645-1975, complete all as specified and as directed. |
| 13 | Rendering,15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed.Note:- Integral water proofing compound shall be measured and paid separately |
| 14 | M & L 10mm thick rendering in ceilings in CM(1:3) finished even & smooth without using extra cement complete all as specified and as directed. |
| 15 | M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering, complete all as specified and as directed. |
| 16 | M & L preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed. |
| 17 | M & L preparation of new plastered surfaces on ceilings, applying three coats of white wash complete all as specified and as directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and disposal of debris complete all as specified and as directed. |
| 19 | M&L for providing screed bed or bedding layer, 15 mm thick, in cement mortar 1:6 for laying floor finishes complete all as specified and as directed. |
| 20 | Rendering, 10 mm thick, in cement mortar 1:4, on wall surafaces, as backing coat to tiles complete all as specified and as directed. |
| 21 | M&L for Non skid ceramic coloured plain tiles,300 x 300 x 7mm thick, conforming to Group B-IIA of IS-13712, first quality, laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 22 | M&L for Glazed ceramic tiles, 300 x 450 x 7mm thick, glossy finish, conforming to Group B-III of IS-13712, first quality, of approved colour, laid on vertical surfaces such as skirting or dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 23 | M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jamns, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white ciment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 24 | Dewatering ,cleaning and removal of all scale ,dirt etc froPVC tanks,capacity500&1000 Ltrs by using following:- (a) Dewatering and cleaning with mechanized process.(b) Scrubing all internal surface of tank by steel wool with using specialized solution like swipe pro etc to remove all scale and dirt. ( c) Clean all Scales and dirt by using vaccum cleaner. ( d) Finally clean the tank and mouth of circulating pipes etcwith clean water. Marking with white paint on tank 'Date of cleaning water tank complete all as specified and as directed. |
| 25 | M&L for Vitreous china squatting pan of orissa pattern, size 580 x 440 mm, white, with 'P' or 'S' trap, with integral foot rest, including demolition and removal of existing old pan complete all as specified and as directed. |
| 26 | S&F in repair Vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device including taking down and removal of existing old water closet with seat cover complete all as specified and as directed. |
| 27 | S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets,flsh pipe, complete all as specified and as directed. |
| 28 | Dismantaling water tanks and removing to store exc 250 but n. exc 500 ltrs complete all as specified and as directed. |
| 29 | S&F in repair Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. |
| 30 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and as directed. |
| 31 | S & F in repair Stainless steel plate rack (bartan stand) made with 4-5 mm dia stainless steel rods of minimum 750mmx250mmx750mm size all as directed by engr-in -charge. |
| 32 | M&L for welding repair works at small patches like hinges, door closer, window repair, steel door/gate fittings like hinge, bolts, bars etc complete all as specified and as directed. |
| 33 | S&F 600x450mm looking mirror of selected quality mounted on 6mm thick commercial plywood and fixed to wall with plug and screws etc complete all as specified and as directed. |
| 34 | S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 35 | M&L for Writing letters or figures (Block,Roman,Italic or Indian) n.exc 30 cm high complete all as specified and as directed. |
| 36 | S&F in repair Pillar taps of PTMT fancy type any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms) complete all as specified and as directed. |
| 37 | S&F Towel rail 600mm long of PTMT fixed withand including chromium plated brass screws and wooden /Plastic cleats(of approved shade) fixed as in repair , complete all as specified and as directed. |
| 38 | S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified and as directed. |
| 39 | S&F, PVC connection of PTMT ,non corrosive with nuts and washers on both ends, 450 mm long suitable for 15 mm bore fixed in repair , complete all as specified and as directed. |
| 40 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 41 | S&F, Stop valve/ Angle valve 15 mm dia, PTMT, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair , complete all as specified and as directed. |
| 42 | S&F, Plastic water closet seat white closed pattern with flat bottom and over and mild steel chromium plated or aluminized hinging device , fixed as in repairs, complete all as specified and as directed. |
| 43 | S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and as directed. |
| 44 | S&F Wash basins, vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts and including new brackets fixed as in repair , complete all as specified and as directed. |
| 45 | M&L, First quality glazed ceramic coloured tiles of (450x300mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 46 | M&L, First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 47 | M&L, Rendering 5 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement , complete all as specified and as directed. |
| 48 | M&L for preparation of new surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and as directed. |
| 49 | M&L for preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening, complete all as specified and as directed. |
| 50 | Demolition of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and as directed. |
| 51 | M & L, Brick work with sub class 'B' bricks , straight or curved on plan not exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed. |
| 52 | Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed. |
| 53 | Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed. |
| 54 | Taking down shutters of any description but exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. |
| 55 | S&F, Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing on Page 160 of SSR Pt-II , complete all as specified and as directed. |
| 56 | S&F, Factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification and drawing on Page No 156 of SSR Part-II Rates, complete all as specified and as directed. |
| 57 | S&F 125x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc complete all as specified and as directed. |
| 58 | S&F, Factory made, 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commertial type on both sides, fitted to chowkhats of 2nd class hard wood (hollock) , complete all as specified and as directed. |
| 59 | S&F, 35 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified and as directed. |
| 60 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 61 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size65 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 62 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: Stainless steel butt hinges and necessary S S screws shall be paid separately |
| 63 | S&F for Factory made solid panel PVC wire gauge door shutter 30 mm thick (style) with both side prelam PVC sheet, consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wire gauge to be fitted in the M.S. frame welded / sealed to the stiles & rails .The wire gauge shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tube. The wire gauge shall be streched to tighten firmly including supply and fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 64 | S&F factory made Windows made of Pre Painted Steel (Based on as per IS 513 On 0.58 MM Thick \\"D\\" quality galvanised as per IS 277 with Zinc coating of 120 GSM) Primer coated with epoxy primer of 5-7 micron thick, finished painted with a polymer paint of 12-16 micron thick and back coat with 5-7 microns thick alkyd backer section of outer frame should be 72X55 MM, centre mullion should be 72X5MM, section for fixed glass beading should be 12X12MM, and section of air tight shutter should be of 48X25MM with groove for gasket outter frame and mullion sections to have rebate for glazed shutter, fly mesh and 2 MM provisions for guard bars/ grills fly mesh shutter section should be of 2X4 MM. The section are to be cut to length mitre joined with corner bracket centre mullions to be fixed with mullion cap 2 nos handle of heavy duty SS pivot hinges shall be provided per shutter. The windows should be panelled with 4 MM thick plain float glass and SS mesh for fly mesh shutter (304 Grade). Rubber gasket are provided all around the glass. The above frames should be fixed to the concrete/ masonry wall by means of self expanding screws including 10 MM square guard bars with 6\\"(15 2.4MM) pitch complete all as specified and as directed. |
| 65 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clips providing and fixing new one , complete all as specified and as directed. |
| 66 | S&F, Sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares exceeding 0.5 Sq. m in each pane, complete all as specified and as directed. |
| 67 | S&F, Figured sheet glass 4.00 mm thick, ordinary quality and glazing with oil putty (in metal frames etc) in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and as directed. |
| 68 | S&F, Aluminium handles ,cast type anodised of 150 mm size, complete all as specified and as directed. |
| 69 | S&F, Aluminium anodizes barrel tower bolts of extuded section and fixed of 200 mm size, complete all as specified and directed by Engineer-in-Charge |
| 70 | S&F, Butt hinges medium weight cold rolled steel of 100 mm size and fixed ,complete all as specified and directed by the Engineer in Charge. |
| 71 | S&F, Aluminium alloy, anodised, door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and as directed. |
| 72 | S&F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and as directed. |
| 73 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and as directed. |
| 74 | M&L, Preparing new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and as directed. |
| 75 | M&L, Preparation of new wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer , complete all as specified and as directed. |
| 76 | S&F, Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000 mm width and of weight between 61 to 80 kgs and fixed as in repair, complete all as specified and as directed. |
| 77 | S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty,including taking down old floor spring hydraulically, complete all as specified and as directed. |
| 78 | Dismantling boarding, any description, fixed in any position with nail / Bidding etc, complete all as specified and as directed. |
| 79 | M&L for 18/19 mm thick Prelaminated particle board,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, both/all sides covered with 4 to 5 mm thick teak wood beading, fixed as in cupboard, arrangement to up down on required size complete all as specified and as directed. |
| 80 | S&F 25-35 mm wide 2-3 mm thick rubber bidding for aluminium /wooden door seal fixed to door shutter with nails/screws,etc and also easing of wooden door for easy opening and closing, as in repair, complete all as specified and as directed. |
| 81 | S & F in repairs floor door stopper of aluminum alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140 mm complete all as specified and as directed. |
| 82 | Easing of aluminium windows/door shutters for closing /opening , including tightening of hinges , adjustment of floor door closer, sliding bolts with new screws etc , adjustment of handles , other miscellaneous adjustments complete all as specified and as directed. |
| 83 | M&L for greassing all moving parts of rolling shutters gear operated rolling shutters exc 8 sqm but not exc 16 sqm of clear opening incl hood cover refixing the same and incl replacement of gear box assembly incl replacement of mild steel spring , ball bearing etc complete all as specified and as directed. |
| 84 | S & F in repair, Aluminium handles ,plate cast type anodised of 150 mm size, complete all as specified and as directed. |
| 85 | S & F in repair, Aluminum anodizes barrel tower bolts of extuded section and fixed of 200 mm size, complete all as specified and as directed. |
| 86 | S & F in repair, Butt hinges medium weight cold rolled steel of 100 mm size and fixed complete all as specified and as directed. |
| 87 | S & F in repair, Aluminum alloy, anodized, sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16 mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and as directed. |
| 88 | Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 89 | M&L for Plain cement concrete type B-1(1:2:4) using 20 mm graded stone aggregates as bed block ,coping , cills, steps etc , complete all as specified and as directed. |
| 90 | S&F powder coated (Min thickness of powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. |
| 91 | S&F powder coated (Min thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. |
| 92 | S&F, Powder coated Aluminium (minimum thickness of powder coating 50 micron) Window and Ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings such as pegstays 150 mm long(1 nos) hinges type B-21 100 mm long (2 nos) suitable handle (1 nos) , complete all as specified and as directed. |
| 93 | Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and as directed. |
| 94 | M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and in existing concealed / surface PVC Conduit/ saddle medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators complete all as specified and as directed.NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls. |
| 95 | All as per item No 94 above but 5 Amp socket outlet, independent. |
| 96 | All as per item No 94 above but on the same board complete. |
| 97 | All as per item No 94 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable. |
| 98 | All as per item No 94 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly . |
| 99 | Supply & fixing in replacement of switch piano type 5 amp SP one way ISI Marked complete all as specified and as directed. |
| 100 | Supply & fixing in replacement of switch 15 Amps SP one way ISI Marked complete all as specified and as directed. |
| 101 | Supply & fixing in replacement of socket outlet 3 pin 5 Amps flush type complete all as specified and as directed. |
| 102 | Supply & fixing in replacement of socket outlet 2-in-1, 3 pin 5 amps and 15 amps flush type complete all as specified and as directed. |
| 103 | Supply & fixing in replacement of stepped type electronic fan regulator flush type on the existing phenolic sheet etc complete all as specified and as directed. |
| 104 | Supply & fixing in replacement of stepped type electronic fan regulator modular complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F in repair ceiling rose complete all as specified and directed by engineer in charge. |
| 106 | Supply & fixing in replacement of ding dong bell electric 230 volt AC complete all as specified and directed by Engineer-in-Charge. |
| 107 | S&F bell push, in repairs, flush type 5 Amps complete all as specified and directed by Engineer-in-Charge.. |
| 108 | S&F single pole blanking plate in the existing cover plate complete all as specified and directed by Engineer-in-Charge |
| 109 | Supply and fix modular white cover plate with frame 3 module ISI marked complete all as specified and as directed. |
| 110 | Supply and fix modular white cover plate with frame 4 module ISI marked complete all as specified and as directed. |
| 111 | Supply and fix modular white cover plate with frame 6 module ISI marked complete all as specified and as directed. |
| 112 | Supply and fix modular white cover plate with frame 8 module ISI marked complete all as specified and as directed. |
| 113 | Supply and fix modular metal flush box 3 module ISI marked complete all as specified and as directed. |
| 114 | Supply and fix modular metal flush box 4 module ISI marked complete all as specified and as directed. |
| 115 | Supply and fix modular metal flush box 6 module ISI marked complete all as specified and as directed. |
| 116 | Supply and fix modular metal flush box 8 module ISI marked complete all as specified and as directed. |
| 117 | Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 4\\"x4\\" complete all as specified and as directed. |
| 118 | Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 7\\"x4\\" complete all as specified and as directed. |
| 119 | Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 8\\"x10\\" complete all as specified and as directed. |
| 120 | Supply & fixing in replacement of SPN enclosure with two pin and earth plug and socket complete with on SP MCB 20 Amps complete all as specified and as directed. |
| 121 | M&L PVC insulated FRLS single core with strandard copper cable of size 6 Sqmm in two run and 6 Sqmm one run for earth and drawing through existing concealed conduit including taking down old UNSV cable complete all as specified and as directed.NOTE :- 2 runs of 6 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter for the purpose of measurement and payment. |
| 122 | All as per item No 121 above but copper cable single core of size 4 Sqmm in two run with earth wire 4 Sqmm single run for continuity.NOTE :- 2 runs of 4 Sqmm cable and one run of 4 sqmm cable will be measured as one running meter for the purpose of measurement and payment. |
| 123 | All as per item No 121 above but copper cable single core of size 2.5 Sqmm in two run with earth wire 2.5 Sqmm single run for continuity.NOTE :- 2 runs of 2.5 Sqmm cable and one run of 2.5 sqmm cable will be measured as one running meter for the purpose of measurement and payment. |
| 124 | M&L PVC insulated FRLS single core with strandard copper cable of size 2.5 Sqmm in two run and 2.5 Sqmm one run for earth and drawing through ISI marked casing caping including taking down old UNSV cable complete all as specified and as directed.NOTE :- 2 runs of 2.5 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter for the purpose of measurement and payment. |
| 125 | M&L for Recess mounted 15 Watt high efficancy recess LED slim round downlighter IP20 with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and as directed. |
| 126 | S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x9 watt comprising of strong jointless CRCA body complete with all accessories and complete all as specified and as directed. |
| 127 | S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories and complete all as specified and as directed. |
| 128 | M&L for Recess mounted 36/ 40 Watt high efficancy 2x2 recess LED flat panel with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and as directed. |
| 129 | S&F in replacement MCB DB SPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and as directed. |
| 130 | S&F in replacement MCB DB SPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and as directed. |
| 131 | S&F in replacement MCB DB SPN 8 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and as directed. |
| 132 | S&F in repairs MCB SP 6 to 32 Amps 240 Volts.\\"B\\" grade complete all as specified and directed. |
| 133 | S&F in repairs MCB,SP 40 Amps, 240 Volts.\\"B\\" grade complete all as specified and directed. |
| 134 | S&F in repairs MCB SPN, 40 Amps, 240Volts .\\"B\\" grade complete all as specified and directed. |
| 135 | S&F in repairs MCB SPN, 63 Amps, 240Volts.\\"B\\" grade complete all as specified and directed. |
| 136 | Supply and fix modular type gang box(3 module for one socket and one switche) suitable for 5/15amp 6pin including plate cover plastic sunken box etc including suitable size of switches and sockets complete all as specified and as directed. |
| 137 | M&L earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender