Tender For Addn/Altn & special Repair To Selected Old Md Accn At Sarath Line At Jalipa Mil Stn
Tender Value
42.50 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn & special Repair To Selected Old Md Accn At Sarath Line At Jalipa Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 2 | M&L for Ready mix plaster in cement mortar ( 1:6) , 15mm thick on other than fair faces of brick work or stone surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for wall care putty on wall complete all as specified and as directed. |
| 4 | M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed. |
| 5 | M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. |
| 6 | M&L for complete removal of existing treatment, plastered or unplastered old surfaces of walls, including filling of cracks/holes by crack filler, removing unnecessary nails applying two coats of oil bound distemper/ emulsion over a coat of interior wall primer over wall care putty complete all as specified and directed. |
| 7 | M&L for complete removal of existing treatment, plastered or unplastered old surfaces of walls, including filling of cracks/holes by crack filler, removing unnecessary nails and applying three coats of white wash complete all as specified and directed. |
| 8 | M & L for Ready mix plaster ,5 mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement, complete, all as specified and directed. |
| 9 | M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment, plastered or unplastered old surfaces of ceiling, including filling of cracks by crack filler, removing unnecessary nails and applying three coats of white wash complete all as specified and directed. |
| 11 | M&L for Ready mix plaster in cement mortar (1:4) , 15mm thick mixed with water proofing compound,on other than fair faces of brick work or stone surfaces , finished even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid separately) |
| 12 | M&L for preparing new plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and directed. |
| 13 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, including complete removal of existing treatment, plastered or unplastered old surfaces of walls, complete all as specified and directed. |
| 14 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 15 | Supply only chicken wire mesh 22 gauge of size not less than 20X20mm all as specified and directed by Engineer-in-Charge.Make : Swastik or equivalent as approved |
| 16 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for and complete all as specified and directed |
| 17 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering |
| 18 | S&F of 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. |
| 19 | S&F for Steel work in tubular trusses,post,purlin,rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 |
| 20 | M&L Preparing new steel surfaces of any description, over 10cm in width/girth, applying two coats of synthethic enamel paint over one coat of red oxide primer. |
| 21 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 23 | M&L for Glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed. |
| 24 | M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 25 | M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 26 | All as per Sl item No 25 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 27 | M&L for 30mm thick PCC 1:2:4 Type B1 with 20mm graded stone aggregate as in levelling course in floor complete all as specified and directed. |
| 28 | M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and mirror polishing for staircase landings anfd trades complete all as specified and directed. Note : Work will be in patches or in bulk |
| 29 | M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed. |
| 30 | M&L for 20mm thick Granite (of any type in single piece) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM (1:4), set jointed & pointed in neat cement slurry complete all as specified and as directed. |
| 31 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 32 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe; includingbedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 33 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm complete all as specified and directed. |
| 34 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm complete all as specified and directed. |
| 35 | S& F of WPC ( Wood polymer composite ) door frame of 100x 65 single extruded comprising of vingin PVC polymer of K value 58-60 ( Suspension grade ) calcium carbonate and mmn section natural fibres ( wood powdwe ice huskwheat husk ) and non toxic additives ( maximum toxicity index 12 for 100 gms fabricated with meter joints after applying PVC solvent cement and screwed with full screws having minimum frame density of 750 kg/cum screw withdrawal strength 2200 N (Face ) & 1100 headed SS N (edge) minimum compressive strength of 58 N/mm2 , Modulus of elasticity 900 N /mm2 and reistant to spread of inflame of class A category with properties of being termite borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast fasterners of required dia and length dia and length complete all as spd and ditected. |
| 36 | M&L for Pressed steel frames size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed. |
| 37 | S & F of single extruded WPC( Wood polymer composite ) plain 30 mm thick door shutter comprising og virgin polymer of K value 58-60 ( Suspension grade) .Calcium carbonate saural fibers ( Wood powder/ rice husk/ wheat rusk ) and non toxic additives ( Maximum toxity index 12 for 100 gms) having density 600 kg/cum and screw withdrawl strength of 1800 N (face) & 900 N (edge). minimum compressive strength 50 N /mm2, modulus of elasticity 850 N/mm2 and resistance of spread of flame of class A cry with property of boing termite/ bore proof, water/ moisture proof and fire retardant and fixing following fittings with necessary full body threated star headed counter sunk SS screws all as per specification and direction of Engr-in-charge.(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf |
| 38 | S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and incl supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf |
| 39 | M&L for preparation of New or previously untreated wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 40 | S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 41 | S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 42 | S&F Aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc including taking down old ventilator etc. complete all as specified and directed. |
| 43 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 44 | M&L for 4.8mm thick sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed. |
| 45 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed. |
| 46 | S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and as directed. |
| 47 | S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:), with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 48 | M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed. |
| 49 | M&L for 75 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 2.5mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed. |
| 50 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 51 | S&F for Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified. |
| 52 | S&F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed. |
| 53 | S&F for 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. |
| 54 | S&F 150 mm size aluminium anodized handle complete all as specified and as directed. |
| 55 | S&F for magnet catches with striking plate for closing of cupboard shutters complete all as specified. |
| 56 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed |
| 57 | S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints including taking down chowkats with shutters complete all as specified and directed |
| 58 | S&F of Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel hinges with soft close of required size with necessary full body threaded star headed counter sunk SS Screws Gunmetal handle.All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory providedby the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets.Make:-RAJSHRI and equivalent make. |
| 59 | S&F for Triple corner glass shelf with 4mm dia 100 % stainless steel, non - magnatic, multilayer chrome plated, argon welded for optimum utilization of unbuilt space and convenience of handling frequently used goods complete all as specified & directed by Engineer -in -Charge. Make: Life time / Home care / Silkmove/ Hettich or equivalant ISI marked. |
| 60 | S&F 600mm x 450mm bevelled edgr mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 61 | S&F width of flaps (When open) in 30 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised. |
| 62 | S&F in repair 25mm dia fancy stainless steel curtain rod with fancy fixing brackets, fancy stops/supports, rollers etc. complete all as specified. |
| 63 | S&F in repair PVC cabinet 450x600mm overall size with looking mirror of selected qality 5mm thick glass mounted over PVC framing as per sample complete all as specified.Make : Neelkamal |
| 64 | S&F in rep vitreous china squatting pan 'Orissa' patern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistrern and flush pipe) including connection to drain (or outgoing pipe) and making good to the floor complete all as specified. |
| 65 | S&FVitreous China wash down water closet pan (pedestalpattern), white (excluding fixing bolts, flushing cistern and flush pipe)including seat cover complete all as specified and directed |
| 66 | S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. |
| 67 | S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and including waste pipe and including 32mm waste coupling of PTMT etc complete all as specified and as directed. |
| 68 | S&F in repairs CP wall mixer for mixing (HOT/COLD) bathroom water, with wall cap of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed. |
| 69 | S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and as directed. |
| 70 | S&F in repair brass CP sink mixer fancy type with regular spout with necessary fixing arrangements complete all as specified and directed by Engr-in-charge.Make : Cat No. 7655 of Prayag or equivalent model in Cera/ Jhonson/Hindware. |
| 71 | S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 72 | S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. |
| 73 | S&F in repair CP fancy type stop valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed. |
| 74 | Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. complete for following capacity of tanks :- 1000 ltrs |
| 75 | S&F for new rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing brass ball valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks :- 1000 ltrs |
| 76 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 77 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 78 | Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 79 | S&F for 16mm bore of CPVC of food grade pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 80 | S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 81 | S&F 25mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 82 | S&F in repair 20mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed. |
| 83 | S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed. |
| 84 | S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed. |
| 85 | S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. |
| 86 | Dismantling of soil, rain water pipes with fittings of any description complete all as specified and as directed. |
| 87 | S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. |
| 88 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. |
| 89 | S&F for 75mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 90 | S&F for 110mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 91 | S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 92 | S&F for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 93 | S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 94 | S&F for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 95 | S&F for 75mm PVC (SWR) vent cowl complete all as specified and directed. |
| 96 | S&F for 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 97 | S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 98 | S&F in repair stainless steel soap dish, approximate size 130x120x30mm complete all as specified and as directed. |
| 99 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated 'F 'bracket guard and railing 60cm long complete all as specified and as directed. |
| 100 | Cutting chases in stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. |
| 101 | S&F for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; cooler stands, railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed. |
| 102 | M&L for preparation of New or old previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 103 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint complete all as specified and as directed. |
| 104 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides) including removal of demolished material exc 500m and n exc 1000m, prepration of surface by cleaning to remove loose particles, dust, latance etc to bottom and sides, including replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421, and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor for toilet/bathroom upto 1.2Sqm complete all as specified and as directed. |
| 105 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides) including removal of demolished material exc 500m and n exc 1000m, prepration of surface by cleaning to remove loose particles, dust, latance etc to bottom and sides, including replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor for kitchen upto 0.5Sqm complete all as specified and as directed. |
| 106 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 500m and n exc 1000m, prepration of surface by cleaning to remove loose particles, dust, latance etc to bottom and sides, including replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421, and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor for bathroom exc 1.20Sqm complete all as specified and as directed.Note : PVC pipes and fittings shall be measured and paid separatley except floor trap. |
| 107 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work. |
| 108 | M & L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas. |
| 109 | Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete |
| 110 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 111 | All as per item No. 136 above but 6mm to 8mm dia. |
| 112 | Demolition of brick work, PCC block or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc. |
| 113 | M&L for Pre-cast cement concrete block masonry Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in CM (1:6) complete all as specified and directed. |
| 114 | M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 115 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement concrete mortar complete all as specified and as directed. |
| 116 | M&L for Reinforced concrete pipes 150mm bore class NP-2, laid and jointed complete with collars, complete all as specified and as directed. |
| 117 | M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) all as specified and directed. |
| 118 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil. |
| 119 | Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm. |
| 120 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete |
| 121 | M&L for Providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and as directed . |
| 122 | M&L for applying neat cement slurry with 3 kg of cement per sqm with mixing of liquid water proofing compound as per manufacturer instructions over surfaces roof, terrace, projection, chajjas, walls after prepration and cleaning of surfaces complete all as specified and directed. |
| 123 | M&L for rendering 10mm thick cement plaster in CM (1:3) on concrete surfaces of roof, terrace, projection, chajjas, walls (old or new), finished even and smooth (without using extra lime or cement) with mixing of WPC as per manufacturer instructions complete all as specified and directed.(Note : WPC shall be measured and paid separately) |
| 124 | M&L for Applying evenly a priming coat with bituminous primer at 4 Kg per 10 sq metre over plastered/concrete surfaces including prepration complete all as specified and directed. |
| 125 | M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) by torched applicatilaid over and including applying evenly a tack coat of industrial bitumen S-35 grade (30/40) at the rate of 1.2 kg per Sq.m including cleaning surfaces by on and as per manufacturer instructions complete and all as specified and directed. |
| 126 | M&L for Providing cement concrete cement concrete in roof kerbs or mud stops, rounded or chamfered on edges (1:2:4) type Bo(using 12.5 mm graded stone agg) for coved fillets of radius 75mm provided at junction of roof and parapet/vertical surfaces, pedding concrte to achive slope as required & making plateform for water tank on roof slab etc complete and all as specified and directed. |
| 127 | M&L for 40mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) over roof, terrace using integral WPC as per manufacturer's instructions well compacted and fair finish complete all as specified and directed. |
| 128 | S&F for stainless steel plate rack size 0.60mX0.60mX0.25m of selected quality as approved by GE, including necessary fixing arrangements over wall complete all as specified and directed. |
| 129 | Racking out joints/pointing to random rubble masonry, polygonal rubble uncoursed or brought upto course complete all as specified and directed. |
| 130 | M&L keyed pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto complete all as sepcified and directed, |
| 131 | M&L for Chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/ staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brushes etc and disposal of debris foe all lead and lifts, all complete all as specified and directed. |
| 132 | M&L for Cleaning & applying rust remover (CICO Clean-o rust) in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 2-3 sq. mtr/ltr not less than 50 microns dft with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturer’s instructions including all machinery, tools tackles and clearing of debris. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Fosroc/Dr Fixit/ACC/L&T/STP |
| 133 | S&F of new steel or rebars by drilling holes with 10 mm to 20mm dia and 100 to 200mm deep as per IS code of 10D formula and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with one or two component styrene free vinylester resin anchor or two components, styrene & cement free epoxy- acrylate fixing and anchoring compound ( having the technical parameters mentioned in material specifications) using standard sealant applicator gun after drilling holes of required diameter at required locations, for holding / fixing / placing in position the steel mesh reinforcement at desired level/ stretching. (Note : Steel/reinforcement shall be paid and measured separately) . Make: CICO RESIFIX-G or equivalent in Fosroc lokfix/Hilti and Master builder (BASF) |
| 134 | M&L for providing Micro concrete with CICO MICROCRETE at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine etc all as specified and directed. Make: CICO MICROCRETE of CICO Technologies ltd or equivalent in Fosroc/STP/BASF |
| 135 | M&L for Epoxy Bonding Agent suitable for bonding new to old concrete, bricks and steel components, bricks, tiles etc after the prepration of old concrete/RCC surface by cleaning and removing of dust, dirt, loose particles, laitance etc by wire brushing, scrapping and washing with water complete all as per manufacturer's instructions.(Make: Dr. Fixit or Equivalent) |
| 136 | M&L for Formwork for flat finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 137 | Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 138 | Disconnecting/dismantling of old existing un serviceable DB's along with metal enclosue concealed in walls of any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc.incl making good the disturbed surfaces and matching with existing surfces complete all as specified and directed by Engr-in-Charge. |
| 139 | Taking down ceiling fan/ exhaust fan, dismantling/ removing fan and blades and deposite the same to the MES store (To be measured only when found serviceable in all respects complete for reuse) |
| 140 | Taking down old sub-main wiring incl fixture & fittings etc complete all as specified and directed by Engr-in-Charge. |
| 141 | Taking down energy meters and keeping in safe custody complete all as directed |
| 142 | M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories including necessary modular metal flush box/pressed steel terminal boxes and modular white cover plate/ 3 mm thick ISI marked laminated sheet cover and brass screws with cup washers for fixing switches, sockets, fan regulators etc. including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light /CB point controlled by one switch, complete all as specified and as directed. |
| 143 | All as per item No 142.00 above but for one ceiling fan point controlled by one switch. |
| 144 | All as per item No 142.00 above but for one exhaust fan point controlled by one switch. |
| 145 | All as per item No 142.00 above but for one light point controlled by two 2-way switches. |
| 146 | All as per item No 142.00 above but for one 3/2 Pin 5 Amp socket out let point on the independent board. |
| 147 | All as per item No 142.00 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches. |
| 148 | All as per item no 142.00here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point. |
| 149 | All as per item no 142.00 here-in-before but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket point. Please Enable Macros to View BoQ information |
| 150 | All as per item no 142.00 here-in-before but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket point. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender