Tender For Certain Including Petty Repair To Ganga Road Incl Map Nalwa Road, Fafa Thimayya And Fafa Nalwa Road Under Age B/R-Ii Of Ge (E) Jalandhar Cantt (Tender Id No 2026_Mes_780762_1)
Tender Value
40 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Including Petty Repair To Ganga Road Incl Map Nalwa Road, Fafa Thimayya And Fafa Nalwa Road Under Age B/R-Ii Of Ge (E) Jalandhar Cantt (Tender Id No 2026_Mes_780762_1)
BOQ
| Sl. No. | Item Description |
| 1 | Taking down and refixing the shutter of any description in the same opening after easing and adjusting and making the door closing properly area of shutter of area exc 1sqm and not exceeding 2 sqm each, complete all as specified and as directed. |
| 2 | Resecuring or earsing and adusting without taking down of shutters of any description exc 1 sqm and n-exc 2 sqm each , complete all as specified and as directed. |
| 3 | S & F in repair MS tower bolt 200 mm stove enamelled black with bright bolt and fixed, complete all as specified and as directed. |
| 4 | S&F in repair Aluminium anodised, barrel tower bolts 150 mm long, , complete all as specified and as directed. |
| 5 | S & F in repair MS sliding door bolts of size 250mm plate type stove enamelled black with bright bolt not less than 12mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed , complete all as specified and as directed.d |
| 6 | S&F in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy , complete all as specified and as directed. |
| 7 | S & F in repair 125mm MS pressed handle oval type stove enamelled black , complete all as specified and as directed. |
| 8 | S&F in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised , complete all as specified and as directed. |
| 9 | S & F in repair 100 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete , complete all as specified and as directed. |
| 10 | S & F in repair 75 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete , complete all as specified and as directed. |
| 11 | S & F in repair 150mm MS ordinary rat tail rod pattern springs incl roller and roller plate complete (Helical door spring) Make Ritz or equivalent as approved welded to steel chowkets . |
| 12 | Supply& fixing in repairs 2nd class hard wood plain fillets square or rectangular or tri angular in section clean sawn planed on both sides secured with nails or beads in section exc 13sqcm and n-exc 25 sqcm including two coats of synthetic enamel paint over acoat of pink wood primer complete . |
| 13 | S & F in repair 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc including removing old work from site any thickness complete all as specified |
| 14 | S & F in repair 6 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc including removing old work from site any thickness, complete all as specified and as directed. |
| 15 | Petty repair to wooden/PVC Cup Board shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats, complete all as specified and as directed. |
| 16 | S&F in repair heavy duty Aluminum floor door stopper 63 mm with two rubber legged, complete all as specified and as directed. |
| 17 | Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all as directed by Engineer-in-Charge |
| 18 | S & F in repair steel window handle MS painted with black japan left or right side complete fixed as directed by Engineer-in-Charge |
| 19 | S & F in repair steel peg stay 250mm long black japan fixed with screw or weleded if required, complete all as specified and as directed. |
| 20 | Welding in repairs not exceeding 2.5 cm in length & thickness of metal to be welded not exceeding 6 mm complete all as specified including material & labour, complete all as specified and as directed. |
| 21 | S&F in repair anti dusting rubber beading for door shutter for anti snakes, dusting etc , complete all as specified and as directed. |
| 22 | M&L for 3 mm thick plain glass fixing and glazing with oil putty/nails wire including haking out old broken glass in wooden/steel frame complete all as specified and directed |
| 23 | M&Lfor 3 mm thick figure glass , pin head type fixing and glazing with oil putty/nails wire including haking out old broken glass in wooden/steel frame complete all as specified and directed |
| 24 | S & F in repair galvanised mild steel wire cloth nominal dia of wire 0.45mm and average width of aperture 1.18mm in wooden/steel frame complete all as specified and directed |
| 25 | M&L for mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE , complete all as specified and as directed. |
| 26 | Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats, complete all as specified and as directed. |
| 27 | Petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys, complete all as specified and as directed. |
| 28 | S & F in repair 20mm dia curtain rails , mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, complete all as specified and as directed. |
| 29 | M&L in repairs 19/20mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination as a cup board shelf, fixed with screws to timber framed work including fixing arrangement , complete all as specified and as directed. |
| 30 | S&F in repair peg set of six made of stainless steel , complete all as specified and as directed. |
| 31 | M&L for Decorative laminate 1 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions with Cup Board or drawers , complete all as specified and as directed. |
| 32 | S&F Continuous (piano) hinges 30 mm width of flaps, mild steel, bright finish or electro galvanised with Cup Board or drawers , complete all as specified and as directed. |
| 33 | S&F Fanlight pivot aluminium with plale size 25mmx 65 mm and suitable fm shutter of 30mm thickness and fixed, complete all as specified and as directed. |
| 34 | S&F 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and as directed. |
| 35 | S&F Ball catches with 8mm dia stee lball, and brass body and striking plate including letting in and fixed, complete all as specified and as directed. |
| 36 | S & F 100 mm Hasp & Staple extruded aluminium alloy , fabricated type, anodised including bolt to hinge plate and fixed with screws with Cup Board shutter, complete all as specified and as directed. |
| 37 | M&L for 6mm thick asbestos cement fiber, corrugated or semi-corrugated sheets in patches not exceeding 3 nos sheets in each patch including refixing of connected sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc also including dismantling of of existing broken sheets in roof coverings, complete all as specified and as directed. |
| 38 | Petty repair to Steel rolling shutters system of any size and any description including reparing of ball bearing, top cover, anchoring rod, hasp and staple,gear operated system,crank handle, chain wheel and hand chain including necessary welding, grreesing etc and making the shutters complete serviceable all as per existing pattern as specified |
| 39 | M&L Racking out joints/pointing hacking for Key, scrubbing down with water and Flush pointing in cement mortar 1:3 on brick tiles laid flat complete , complete all as specified and as directed. |
| 40 | M&L for plastering in patches not exceeding 3 sqm in each patch, 15 mm thick in cement mortar 1:4, finished even and smooth (without using extra cement) including taking down plastering and three coats of white/colour wash complete , complete all as specified and as directed. |
| 41 | M&L for plastering in patches not exceeding 3 sqm in each patch, 5 mm thick in cement mortar 1:3 on ceiling , finished even and smooth (without using extra cement) including taking down plastering and three coats of white wash complete , complete all as specified and as directed. |
| 42 | M&L for renewing of ceramic/glazed tiles 6 to 8 mm thick in patches with new tiles of same existing patterns and size , area not exc 5 Sqm incl removing and cleaning old tiles preparing beds and or setting jointing and pointing tiles complete all as specified. |
| 43 | M&L for repairing of RCC projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete , complete all as specified and as directed. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. |
| 44 | Taking down steel water tubing and connections, cleaning and refixing old 15 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , etc.complete all as specified |
| 45 | Taking down steel water tubing and connections, cleaning and refixing old 20 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , etc.complete all as specified |
| 46 | Taking down steel water tubing and connections, cleaning and refixing old 25 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , etc.complete all as specified |
| 47 | S&F medium grade steel water tubing, 15 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed |
| 48 | S&F medium grade steel water tubing medium grade, 20 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed |
| 49 | S&F steel water tubing, 25 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors all as specified and directed |
| 50 | S & F in repair GI socket 15mm/20mm/25mm bore replaced independly as approved by Engineer-in-Charge |
| 51 | S & F in repair GI nipple 15mm/20mm/25mm bore 50 mm to 200mm long replaced independly as approved by Engineer-in-Charge |
| 52 | S & F in repair GI tank nipple 15mm/20mm/25mm with check nuts and washers replaced independly as approved by Engineer-in-Charge |
| 53 | S & F in repair 15mm/20mm/25mm bore GI union replaced independly as approved by Engineer-in-Charge |
| 54 | S & F in repair spindle of any type replaced independly as approved by Engineer-in-Charge |
| 55 | S & F in repair 15mm/20mm/25mm bore GI elbow replaced independly as per approved by Engineer-in-Charge |
| 56 | S & F in repair 15mm/20mm/25mm bore GI Tee replaced independly as approved by Engineer-in-Charge |
| 57 | S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified |
| 58 | S & F in repair 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min 142 gm) complete all as specified |
| 59 | S&F in repair 25mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified |
| 60 | S&F in repairs for 25 mm bore Gate Valve of brass cast copper aloy high pressure screwed for iron pipe and fixed complete all as specified |
| 61 | Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution and removing vegetation around the over head tank/plate form including opening and reconnecting with GI tubing as site requirement complete all as directed by Engineer-in-Charge |
| 62 | S & F PVC cover of water tank maching with existing water tank complete all as specified |
| 63 | S&F 500 ltr capacity rotational moulded polythylene water storage tank antimicrobial triple layer (white) (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete , complete all as specified and as directed. Make :- Sintex (Pure)/ Sheetal |
| 64 | S & F 1000 capacity ltr rotational moulded polyethylene water storage tank antimicrobial triple layer (white) (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified.Make :- Sintex (Pure)/ Sheetal |
| 65 | S&F in Repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete , complete all as specified and as directed. Make :- Cera/ Hindware. |
| 66 | Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed by Engineer-in-Charge.Make :- Cera/ Hindware/ Parryware. |
| 67 | S&F in repair vitreous china squatting pan of Orisa pattern size 580mmx400mm white with ‘P’ or ‘S’ trap front or back inlet and integral foot rest complete all as specified and directed by Engineer-in-Charge. Make :- Cera/ Hindware/ Parryware. |
| 68 | S&F in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand. Make :- Cera/ Hindware/ Parryware. |
| 69 | S&F vitreous china wash down water closet (Pedested patern ) white incl fixing bolt, plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromimum plated hinging device, fixed in repairs all as specified directed by Engr-in-Charge.Make :- Cera/ Hindware/ Parryware. |
| 70 | S&F in Repair waste Coupling Suitable for Existing WHB/Sink, complete all as specified and as directed. |
| 71 | S & F in repairs waste pipe suitable for Existing WHB/Sink , complete all as specified and as directed. |
| 72 | Petty Repair for stop leaking of PTMT Bib tap/ Pillar tap/Stop cock by suitable jumper washer and etc, complete all as specified and as directed. |
| 73 | Petty Repair for stop leaking of CP Brass Bib tap/ Pillar tap/Stop cock/ by suitable spindle and etc, complete all as specified and as directed. |
| 74 | Petty Repair for stop leaking of any type CP Brass bib tap/ Pillar tap/Stop cock/wall or WHB Mixture by suitable original jaquar marked spindle(Mini weight-100 grams), complete all as specified and as directed. |
| 75 | S&F in repairs for 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90 gms) , complete all as specified and as directed. |
| 76 | S&F in repair Bib tap cast copper alloy suitable for 15mm bore iron pipe , complete all as specified and as directed.Make :- Haquar/ Cera/ Kohler. |
| 77 | S&F in repair Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type complete , complete all as specified and as directed.Make :- Haquar/ Cera/ Kohler. |
| 78 | S & F in repair 15 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min wt 15mm-90mm), complete all as specified and as directed. |
| 79 | S & F in repair 20 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min wt 15mm-90mm) complete all as specified |
| 80 | S&F in repair pillar tap, PTMT 15mm bore dia of pipe screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe , complete all as specified and as directed. |
| 81 | S&F in repair pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.Make :- Haquar/ Cera/ Kohler. |
| 82 | S&F in repair Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin , complete all as specified and as directed. |
| 83 | S&F in repair PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified |
| 84 | S&F in repair 15mm Angle/stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified.Make :- Haquar/ Cera/ Kohler. |
| 85 | S&F in repair 20mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .complete all as specified |
| 86 | S&F in repair 15mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed . Complete all as specified |
| 87 | S&F in repair Swivel shower of PTMT of any colour for fixing with 15mm pipe (Min wt 40 Gm) complete , complete all as specified and as directed. |
| 88 | S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to GI pipe complete all as specified |
| 89 | M&L in repair PVC bath room cabinet of size 535 x 483 mm x 110 mm with mirror fixed in repairs all as specified |
| 90 | S&F in repair Brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges , complete all as specified and as directed. |
| 91 | S&F in repair Brass chhromium plated tubular tower ring 150mm dia round , D type, between flanges, complete all as specified and as directed. |
| 92 | S&F in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug , complete all as specified and as directed. |
| 93 | Acrylic corner set of 3 pieces as per sample approved by Engr -in-charge, complete all as specified and as directed. |
| 94 | S & F in repair for 600 mm X450 mm looking mirror of any size 5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified |
| 95 | S&F Chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality , complete all as specified and as directed. |
| 96 | S&F Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws,, complete all as specified and as directed. |
| 97 | S&F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs all as specified and directed Engr-in-Charge. |
| 98 | S&F in repair Mild steel chromium plated jet for EWC 600mm long tube superior quality , complete all as specified and as directed. |
| 99 | M&L in repair stainless steel plate rack of superior quality size 36\\" x 24\\" with not less than 8 kg all as specified . |
| 100 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling and waste pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm. complete all as specified.Make :- Blue line/ Jayna/ Cera. |
| 101 | S&F in repair wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified Make-Jaquar/ Cera. |
| 102 | S & F in repair CP gratting 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trapcomplete all as specified and as directed. |
| 103 | S&F in repair for 110mm PVC pipe single socketed in any length with rubber joints fixed to wall complete , complete all as specified and as directed. |
| 104 | S & F in repair for 110mm PVC bends / shoe of any radius complete all as specified |
| 105 | S&F oval access door cover cast iron fixed with CI Pipe with washer, nut & bolt including cleaning and applying cement around the pipe hole for arresting the seepage all as specified and directed |
| 106 | S&F for 18 to 20mm thick machine cut kota stone pri polished slab 400mmx400mm in size fixed over drain pits complete all as specified and directed. |
| 107 | Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage all as specified and directed by Engr-in-Charge. Make:- WACKER SILICONES (GP Silicone Sealant ) |
| 108 | M&L for prepration of newly plastered surfaces of walls including cornices pilasters etc and applying two coat of oil Emulsion Distemper (OBD) over a coat of priming surface complete , complete all as specified and as directed. |
| 109 | Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water , complete all as specified and as directed. |
| 110 | M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified |
| 111 | M&L for 15 mm thick cement mortar 1:4 with WPC on brick or concrete surface finished even and smooth without using extra cement all as specified (WPC shall be measured and paid separately) |
| 112 | \\"Supply only\\" Integral waterproofing compound, complete all as specified and as directed. |
| 113 | M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces finished surface even and smooth without using extra cement as in ceiling surfaces complete all as specified and as directed.. |
| 114 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces , complete all as specified and as directed. |
| 115 | M&L for preparing newly plastered surfaces of walls by applying two coats of oil bound distemper over a coat of birla while putty complete , complete all as specified and as directed. |
| 116 | M&L for prepration of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint over a coat of primer complete all as specified and directed . |
| 117 | M&L Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces),washing rubbing down and stopping of distempered and painted surface and applying one coat of oil Emulsion Distemper (OBD) complete , complete all as specified and as directed. |
| 118 | M&L for Complete removal of existing surfaces of wall and applying two coats of oil Emulsion Distemper (OBD) over a coat of birla white wall care putty complete , complete all as specified and as directed. |
| 119 | M&L for preparation of old decorated plastered surface of ceiling including cornices pilasters etc.and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 120 | M&L for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying one coat of cement base paint complete , complete all as specified and as directed. |
| 121 | M&L for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying Two coats of cement base paint complete , complete all as specified and as directed. |
| 122 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint of (white or tinted) complete , complete all as specified and as directed. |
| 123 | M&L for preparation of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 124 | Supply and fixing steel window/ventilator (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters including box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolts and handles & flat iron etc and necessary cooler arrangement in window and fixed with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), complete as per Drg No. CEJZ/WD-1655/22 & CEJZ/TD-1019/08 sheet 1/3 to 3/3. Note : The above rate for glazed shutter window/ventilator and measured one time clear opening for payment of window |
| 125 | Ditto all as per item no 124 above but in gauzed shutters without sash bars all as specified and directed by Engr-in-charge |
| 126 | Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same complete all as specified & directed. |
| 127 | Cleaning of roof removing bushes, mud, debris, digging out roots and making good the disturbed portion of roof tiles with pointing in CM (1:3) including matching the same complete all as specified and as directed. |
| 128 | M&L for refixing in repair of rubber moulded Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade over and including 30mm thick crushed stone sand layer complete all as specified and as directed. |
| 129 | M&L for refixing in repair of coloured chequered cement concrete tiles 30cm X 30cm X 25mm thick set jointed & pointed in neat cement slurry with grey cement and pigments ove 20 mm thick screed bed in CM (1:6) and making good complete all as specified |
| 130 | M&L \\"Fixing only\\" in repair of false ceiling sheets/tiles any type and any size suitably fixed in false ceiling grid/frame with staples or screws including scafolding and material required complete all as specified and as directed |
| 131 | Dismantling wall and ceiling boards any type, any thickness and any shape including cover fillets and frame work.complete all as specified and directed . |
| 132 | Dismantling structural steel works as in grills, doors ,gates etc complete all as specified and directed . |
| 133 | S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 |
| 134 | S&F Fibre glass reinforced translucent plain sheeting with min 100mm side lap fixed with coach screw and washer in roof, wall etc |
| 135 | S&F 4mm thick Non Asbestos (E-Board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified and as directed |
| 136 | S&F Powder coated aluminium snap grid frame work of size 605x605mm for false ceiling all as specified in repair Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender