Tender For Supply Of Materials Of Vb-G Ram G Works For Garopara Gram Panchayat
Tender Value
10.20 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
15 days left
EMD
20411
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of Materials Of Vb-G Ram G Works For Garopara Gram Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 2 | Hire charges of Pump set of capacity 4000 litres/hour |
| 3 | Vibrator (Needle type 40 mm) |
| 4 | Surface Vibrator |
| 5 | Water tanker 5000 Ltr. Capacity |
| 6 | Seam bolts and nuts 6 mm dia and 25 mm long |
| 7 | Brick Aggregate (single size):63 mm nominal size |
| 8 | Brick Aggregate (single size):50 mm nominal size |
| 9 | Brick Aggregate (single size):40 mm nominal size |
| 10 | Stone Aggregate(single size):50 mm nominal size |
| 11 | Stone Aggregate(single size): 06 mm nominal size |
| 12 | Bamboo 25 mm dia 2.5 meter long |
| 13 | Coal Tar |
| 14 | Brick bats |
| 15 | Wire brush |
| 16 | Soft brush |
| 17 | White cement |
| 18 | Coal (steam) |
| 19 | Brass 150 mm floor door stopper (0.357 kg) |
| 20 | Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles |
| 21 | Unslaked lime |
| 22 | Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre |
| 23 | Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre |
| 24 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 25 | Cement Primer |
| 26 | White cement based putty |
| 27 | Black Japan |
| 28 | Enamel paint |
| 29 | Synthetic enamel paint in black or chocolate shade |
| 30 | Synthetic enamel paint in all shades except black or chocolate shade |
| 31 | Superior copal varnish |
| 32 | Green or blue medium shade pigment |
| 33 | Galvanised steel plain sheets |
| 34 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 35 | Galvanised steel J or L hooks 8 mm dia |
| 36 | Galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots |
| 37 | Bamboo 18 to 20cm grith and 90 cm Height |
| 38 | Stone dust |
| 39 | Crushed stone 2.36 mm to 12.5 mm size |
| 40 | G.I Limpet washer |
| 41 | Bitumen washer |
| 42 | G.I. Plain washer for seam bolts |
| 43 | Water proofing materials |
| 44 | Welding by gas plant |
| 45 | Welding by electric plant |
| 46 | Wire nails |
| 47 | Wire mesh (rabbit) |
| 48 | C.I. Grating 100x100 mm |
| 49 | C.I. grating 150x150 mm |
| 50 | C.I. grating 180x180 mm |
| 51 | Mirror of superior make glass 60x45 cm |
| 52 | vitreous china pedestal for wash basin |
| 53 | Slotted cowl (terminal guard) 75 mm dia |
| 54 | Slotted cowl (terminal guard) 100 mm dia |
| 55 | G.I. Union 15 mm nominal bore |
| 56 | G.I. Union 20 mm nominal bore |
| 57 | G.I. Union 25 mm nominal bore |
| 58 | G.I. Union 32 mm nominal bore |
| 59 | G.I. Union 40 mm nominal bore |
| 60 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 61 | R.C.C. pipes NP2 class 300 mm dia |
| 62 | R.C.C. pipes NP2 class 450 mm dia |
| 63 | stoneware pipes grade A (60 cm long) 100 mm dia |
| 64 | White plastic seat (solid) with lid C.P. brass hinges and rubber buffers |
| 65 | Shower rose C.P brass for 15 to 20 mm intel 100 mm dia |
| 66 | Shower rose C.P.brass for 15 to 20 mm intel 150 mm dia |
| 67 | Vitreous china squatting plate urinal |
| 68 | H.P. or L.P. ball valve with polythene floats: 15 mm dia |
| 69 | H.P. or L.P. ball valve with polythene floats: 20 mm dia |
| 70 | H.P. or L.P. ball valve with polythene floats: 25 mm dia |
| 71 | 20 mm dia Gunmetal gate valve with wheel |
| 72 | Vitreous china angle back wash basin 400x400 mm |
| 73 | C.P. brass waste 32 mm |
| 74 | Vitreous china foot rests 250x125x25 mm |
| 75 | Soling stone & masonry stone |
| 76 | R.C.C. Pipes 600,700,750 & 800 mm dia |
| 77 | R.C.C. pipes 900 mm dia |
| 78 | R.C.C. pipes 1000 mm dia |
| 79 | R.C.C. pipes 1200 mm dia |
| 80 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 81 | Float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 Kg/ sqm) |
| 82 | Float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm) |
| 83 | Anodised Aluminium hanging type door stopper |
| 84 | Common burnt clay F.P.S. (non modular) bricks class designation 7.5 |
| 85 | MS Brackets / Aluminium Alloy Brackets |
| 86 | Galvanised steel corrugated sheets |
| 87 | Stainless steel bolts /square bar and plates |
| 88 | Mild steel tubes hot finished seamless type |
| 89 | Red oxide Zinc chromate primer |
| 90 | Coloured inter locking C.C. paver block |
| 91 | Hydraulic door closer tubular type Aluminium section body |
| 92 | Oxidised M.S. casement stay (straight peg type) 300 mm not less than 0.33 kg |
| 93 | Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 178 mm |
| 94 | Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm |
| 95 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 96 | Coloured Orissa pattern W.C. pan 580x440 mm |
| 97 | Coloured Pedestal type W.C. pan 580x440 mm (European type) |
| 98 | Circular shape 450 mm dia precast R.C.C. manhole cover with frame L.D. -25 |
| 99 | uPVC pipes (working pressure 4 kg /cm2 ) Single socketed pipe 75 mm dia |
| 100 | uPVC pipes (working pressure 4 Kg / cm2 ) Single socketed pipe 110 mm dia |
| 101 | uPVC single equal Tee (without door) 75x75x75 mm |
| 102 | uPVC single equal Tee (without door) 110x110x110 mm |
| 103 | uPVC single equal Tee (with door) 75x75x75 mm |
| 104 | uPVC single equal Tee (with door) 110x110x110 mmmm |
| 105 | uPVC bend 87.50, 75 mm bend |
| 106 | UPVCbend 87.50, 110 mm bend |
| 107 | UPVC pipe clip 75 mm bend |
| 108 | UPVC pipe clip 110 mm bend |
| 109 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
| 110 | C.P.Brass bibcock 15 mm |
| 111 | C.P. Brass long body bibcock 15 mm |
| 112 | C.P. Brass stop cock (concealed) 15 mm |
| 113 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 114 | White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS: 2556 |
| 115 | 15 mm PTMT bib cock |
| 116 | PTMT push cock 15 mm dia |
| 117 | PTMT - Liquid Soap Container of 400 ml capacity |
| 118 | PTMT - Soap Dish/Holder 138x102x75 mm |
| 119 | Turpentine oil |
| 120 | Coloured inter locking C.C. paver Block |
| 121 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 122 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs White, Ivory, Grey, Fume Red Brown etc |
| 123 | Adhesive solvent cement |
| 124 | Geotextile 120 gram per sqm membrane |
| 125 | Acrylic exterior paint |
| 126 | Vitrified floor tile 60x60 cm |
| 127 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
| 128 | Cap for 15.88 mm outer dia pipe |
| 129 | Cap for 22.22 mm outer dia pipe |
| 130 | Cap for 28.58 mm outer dia pipe |
| 131 | Cap for 34.00 mm outer dia pipe |
| 132 | Cap for 42.70 mm outer dia pipe |
| 133 | Cap for 48.60 mm outer dia pipe |
| 134 | G I wire |
| 135 | Bamboo (8cm-10cm dia) including fixing |
| 136 | Eucalyptus Bullah (7.5cm -10cm dia) |
| 137 | Eucalyptus Bullah (12.5cm -15cm dia) |
| 138 | Eucalyptus Bullah (17.5cm -20cm dia) |
| 139 | Sal Bullah (7.5cm -10cm dia) |
| 140 | Sal Bullah (12.5cm -15cm dia) |
| 141 | Sal Bullah (17.5cm -20cm dia) |
| 142 | Hire charges of Shuttering plank (25mm-30mm thick) with Prop including all fittings |
| 143 | Hire charges of Shuttering plank (25mm-30mm thick) without Prop including all fittings |
| 144 | Hire charges of Shuttering plank (above 30mm-37mm thick) with Prop including all fittings |
| 145 | Hire charges of 5 KVA Generator |
| 146 | Hire charges of 3 KVA Generator |
| 147 | Hire charges of Monkey set |
| 148 | Loading, unloading and stacking by Manual Means (R.C.C. pipes , C.I. pipes and unreinforced) Cement pipes 1400 & 1800 mm dia |
| 149 | Sausage Wire Net |
| 150 | Wood dust |
| 151 | Sal Silliguri |
| 152 | Sal Malaysia |
| 153 | Neem wood |
| 154 | Other Local Wood |
| 155 | Ordinary Teak wood |
| 156 | Sisu/Gamar wood |
| 157 | Local Sal Wood |
| 158 | Bright finished or black enamelled mild steel screws 40 mm |
| 159 | Bright finished or black enamelled mild steel screws 20 mm |
| 160 | Bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm |
| 161 | Bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm |
| 162 | Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm |
| 163 | Coal Tarring |
| 164 | Coloured Pedestal type W.C. pan 580x440 mm (European type) S Trap |
| 165 | Thermocol 12.5 mm thick. |
| 166 | Iron hasp bolt 250mm long |
| 167 | Iron door ring 50mm dia |
| 168 | Iron Catch Hook 6mm dia 225mm long |
| 169 | M.S Clamps 40mm X 6mm, 125mm Length |
| 170 | Anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia. bolt. |
| 171 | Anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia. bolt. |
| 172 | Anodised aliminium D-type handle continuous plate base (Hexagonal/ Round rod) 150 mm grip x 10 mm dia rod |
| 173 | Steel railing |
| 174 | CI manhole cover 450 mm dia |
| 175 | C.P. over brass Waste fittings 32 mm |
| 176 | Malayasia sal cleat |
| 177 | two point nose window handle |
| 178 | Empty Gunny Bag |
| 179 | waste pipe, with PVC coupling at one end fitted with necessary clamps900 mm long |
| 180 | waste pipe, with PVC coupling at one end fitted with necessary clamps 750 mm long |
| 181 | False ceiling (with 6 mm thick Fiber Cement Designer Board) |
| 182 | Supplying fitting and fixing of bitumen drum sheet including nails for pilling or other works. |
| 183 | Modular clay bricks |
| 184 | Precast cement concrete blocks (Nominal Mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar) |
| 185 | Locking Spring (Zig Zag). |
| 186 | Fixing post of iron or precast concrete incl. digging hole, packing the hole with cement concrete (1:3:6) with jhama khoa and necessary plaster with 15 cm th cement plaster (1:6) complete |
| 187 | Polythene sheet (150 gm per sqm) |
| 188 | Galvanised Barbed wire 3 ply 12 gauge / 4 points including fittings and fixing to the post complete in all respect. |
| 189 | Fixing Barbed wire to the post including fiting fixing. |
| 190 | Hire charges for 5 HP with operator,fuel and shifting etc all charges complete |
| 191 | Hire charges for hand cart, tri cycle, trolly, Panja, Kata,GI Bucket, Boxes, Basket etc complete set |
| 192 | Reducing Elbow 20 mm x 15 mm |
| 193 | Open Weave Jute Geo-textile (JGT) having overall weight of 500 gm per Sq. M thickness 5 mm, width 1220 mm, Tensile strength 10 KN/m x 7.50 KN/m including lapping, staples or nails, testing |
| 194 | Woven Jute Geo-textile (JGT) 724 gm/sqm possessing tensile strength of 25 KN/m including lapping, staples or nails, testing |
| 195 | Sieve |
| 196 | Nylon Net |
| 197 | Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts by means of galvanised \\"C\\" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G. 5 mm. x 75 mm. x 8 g. |
| 198 | P.V.C.water storage tank 1000 lit (Bankura) |
| 199 | RoofTrussesetc.usingjoists,channelsand angles of specified section weighing less than 22.5 kg/ m (Bankura) |
| 200 | Squareorhexagonalmeshnettingmadewith18B.W.G.galvanisedwire,fittedandfixedcompleteasperdesign(excludingthesupportingframeworkbutincluding local sal wood battens of size 37.5mmx25mm) 25 mm (Bankura) |
| 201 | Loading unloading and stacking by Manual Means Tar, Bitumen etc |
| 202 | Medium Sand |
| 203 | Boulder 30/45 KG, Pakur Variety |
| 204 | ornamental grill above 16 kg |
| 205 | Water Tanker 500 lt capacity |
| 206 | Orissa pattern water closet 530x410 mm |
| 207 | Jute rope |
| 208 | Coconut rope |
| 209 | Poly rope |
| 210 | Shovels |
| 211 | Portland Cement |
| 212 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 213 | Fan Hook |
| 214 | R.C.C ventilator of 20 mm. thick Upto 0.10 sq.m. area |
| 215 | R.C.C ventilator of 20 mm. thick above 0.10 sq.m. area |
| 216 | Udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 217 | Chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 218 | Udaypur marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 219 | Chawk dungri marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 220 | FRP composite door frame 66mm x 70mm |
| 221 | FRP composite door frame 66mm x 90mm |
| 222 | Structural members of specified sections weighing less than -22.5 Kg./m (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964) |
| 223 | Structural Works in Roof Trusses etc. using joists, channels and angles of specified section (conforming to IS: 226, IS: 808 & SP (6)- 1964) weighing less than 22.5 kg/ m |
| 224 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 (trusses spanning up to 12.00 m) |
| 225 | M.S. structural with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) Span up to 12 Mtr |
| 226 | Collapsible gate |
| 227 | MS Integrated grill for steel window and ventillator |
| 228 | 1.5 mm thick ms sheet |
| 229 | Two point nose steel handle |
| 230 | Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. |
| 231 | top hung side hung ventillator |
| 232 | Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm |
| 233 | False ceiling (with 4mm thick Pearl Designer Fibre Cement Board) |
| 234 | Supplying, fitting & fixing Asbestos corrugated sheet(6 mm thick) |
| 235 | Supplying, fitting & fixing Asbestos ridging |
| 236 | Supplying, fitting & fixing Zn-Al alloy steel sheet work In Roof |
| 237 | Supplying, fitting & fixing Aluminium sheet ridging |
| 238 | fitting and fixing glass reinforced polyester translucent fiber glass sheet |
| 239 | fitting and fixing glass reinforced polyester translucent ridging |
| 240 | fitting & fixing circular corrugated Aluminium sheet |
| 241 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window |
| 242 | Supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf Aluminium swing door |
| 243 | Supplying, fitting & fixing of Aluminium fixed partition wall of all aluminium sections |
| 244 | Supplying solid flush type doors of commercial quality |
| 245 | Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 246 | Hire charges of Diesel Road Roller- 8 to 10 tonne |
| 247 | Stone Aggregate(single size):63 mm nominal size |
| 248 | Stone Aggregate(single size): 40 mm nominal size |
| 249 | Stone Aggregate(single size):20 mm nominal size |
| 250 | Stone Aggregate(single size): 10 mm nominal size |
| 251 | Moorum |
| 252 | RCC pipe 600 mm dia NP- 3 spigot |
| 253 | RCC pipe 900 mm dia NP - 3 spigot |
| 254 | RCC pipe 1000 mm dia NP -3 spigot |
| 255 | RCC pipe 1200 mm dia NP - 3 spigot |
| 256 | RCC pipe 1800 mm dia NP- 3 spigot |
| 257 | RCC pipe 600 mm dia NP- 4 spigot |
| 258 | RCC pipe 900 mm dia NP- 4 spigot |
| 259 | RCC pipe 1000 mm dia NP- 4 spigot |
| 260 | RCC pipe 1200 mm dia NP- 4 spigot |
| 261 | RCC pipe 1800 mm dia NP- 4 spigot |
| 262 | Tar bitumen |
| 263 | 1st class picked Jhama Bricks(Traditional) |
| 264 | Stone boulder( 225 mm above ) |
| 265 | Stone boulder ( 225mm-150mm ) |
| 266 | Fine Sand |
| 267 | Medium Sand |
| 268 | Coarse Sand |
| 269 | Loading unloading & stacking Sand/ stone aggregate (less than 40mm nominal size) |
| 270 | Loading unloading & stacking stone aggregate (above 40mm nominal size) |
| 271 | Loading unloading & stacking lime, moorum, PWD Building Works 2017 rubish and similar miscellaneous material |
| 272 | Stone Screening Type A (13.2 mm) |
| 273 | Stone Screening Type B (11.2mm) |
| 274 | 1st Class traditional Bricks (kiln burnt) |
| 275 | Loading, unloading & stacking by manual means (R.C.C. pipes , C.I. pipes and unreinforced Cement pipes) 600, 700, 750 & 800 mm dia |
| 276 | Loading, unloading & stacking by manual means (R.C.C. pipes , C.I. pipes and unreinforced Cement pipes) 900 mm dia |
| 277 | Loading, unloading and stacking by Manual Means (R.C.C. pipes , C.I. pipes and unreinforced) Cement pipes 1000, 1100 & 1200 mm dia |
| 278 | River bed material |
| 279 | Tor Steel Rods/HYSD bars/TMT bars (SAIL/TATA/RINL) (Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 280 | Tor Steel Rods/HYSD bars/TMT bars(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 281 | Tor Steel Rods/HYSD bars/TMT bars (Other than Sail/TATA/RINL/JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 282 | Loading, unloading and stacking by Manual Means of Steel |
| 283 | Bitumen VG-30 |
| 284 | Bitumen Emulsion |
| 285 | Grade 1 stone metal 63 mm to 45 mm |
| 286 | Fencing Post 215 cm 150 mm X 150 mm section at bottom, 100 mm X 100 mm section at top with T-Base 300 mm X 150 mm X 100 mm, having 4 nos 6 mm dia vertical M.S. reinforcement and 6 mm dia binders @ 200 mm centres, finished smooth |
| 287 | Silver sand |
| 288 | G.I. pipes 15 mm dia |
| 289 | G.I. pipes 20 mm dia |
| 290 | G.I. pipes 25 mm dia |
| 291 | G.I. pipes 32 mm dia |
| 292 | G.I. pipes 40 mm dia |
| 293 | G.I pipes 50 mm dia |
| 294 | G.I. pipes 65 mm dia |
| 295 | G.I. pipes 80 mm dia |
| 296 | Vitreous China flat back wash basin 630x450 mm |
| 297 | Vitreous china flat back wash basin 550x400 mm |
| 298 | Vitreous china flat back wash basin 450x300 mm |
| 299 | PTMT pillar cock |
| 300 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia |
| 301 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia |
| 302 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia |
| 303 | Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia |
| 304 | Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia |
| 305 | Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia |
| 306 | 32 MM dia polythene flush pipe |
| 307 | 18 mm thick marble partition slab for urinals including fitting fixing (with Chawk Doongri marble) |
| 308 | GI pipe 32 mm dia medium quality for UNDERGROUND WORKS |
| 309 | GI pipe 40 mm dia medium quality for UNDERGROUND WORKS |
| 310 | CPVC (Chlorinated Polyvinyl Chloride) pipes (15 mm dia) [For Concealed Work] |
| 311 | CPVC (Chlorinated Polyvinyl Chloride) pipes (20 mm dia) [For Concealed Work] |
| 312 | CPVC (Chlorinated Polyvinyl Chloride) pipes (25 mm dia) [For Concealed Work] |
| 313 | Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 314 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 315 | Polythene Bib Cock / Stop Cock (HD) with metal/plastic inlet (EMCO / ATLAS or equivalent) |
| 316 | Sink 630 mm X 550 mm X 180 mm with waste fittings and two coats of painting of C.I. brackets |
| 317 | Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock - 15 mm equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand. |
| 318 | 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). |
| 319 | P.V.C. CONNECTOR 15 mm dia 600 mm long |
| 320 | Polythene waste fittings complete 32mm |
| 321 | Waste pipe, with PVC coupling at one end fitted with necessary clamps 900 mm long |
| 322 | Towel rail (CP over brass )- 600 mm |
| 323 | C.P. over brass Waste fittings 32 mm |
| 324 | UPVC Plain Y 75 mm dia |
| 325 | UPVC Plain Y 110 mm dia |
| 326 | Shower jet |
| 327 | Corner Urinal |
| 328 | CI P trap |
| 329 | CI S Trap |
| 330 | Porcelain P trap |
| 331 | Porcelain S trap |
| 332 | Check valve 32mm |
| 333 | Check valve 40mm |
| 334 | Check valve 50mm |
| 335 | Reducing socket 20mm x 15mm |
| 336 | Reducing socket 25mm x 20mm |
| 337 | Reducing socket 25mm x 15mm |
| 338 | Reducing Elbow 25 mm x 20 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender