Tender For Providing & Fixing Dg Set (Generator) At Coa, Kota

Sharing tender

Tender for Providing & Fixing Dg Set (Generator) At Coa, Kota , Dg Set , 125 Kva At 0.8 providing fixing 415V 50Hz 3-Ǿ With 4 Cylinder Engine: Supply Installation Testing and Commissioning of Radiator Cooled Silent Dg Set (As Per Latest Cpcb-Iv+ Emission Norms) Having Specifications As Per A, B, C, D, E, F & G : A) Diesel Engine : Turbo Charged Diesel Engine ( Conforming To Bs:649/5514), Multi Cylinder, Dynamically Balanced Flywheel, Electric Start Of Suitable Bhp At 1500 Rpm Capable Of Taking 10% Over Loading For One Hour After 12 Hours Of Continuous Operation., Dry Exhaust Mainfold With Silencer And Diesel Oxidation Catalyst & Selective Catalyst Reduction System (Isolated From Main Dg Chamber), Up To 1.50 M Exhaust Piping (With Lrb Insulation & Alum. Cladding ) As Required .Diesel Engine Should Have Precise Emission Control By Treatment With Diesel Exhaust Fluid (Def)/Aqueous Urea Tank (Above 82.5 Kva) As Per Cpcb 4+ Norms B) Alternator : Ac Brush Less Spdp Synchronous Alternator Rated Of Appropriate Kva, 415 Volts At 1500 Rpm, 3 Phase, 50 Hz, Ac Supply With 0.8 Lagging Power Factor. Alternator Conforming To Bs 5000 (Part 99) Or Is/Iec 60034-1. . Alternator Shall Be Self Regulated With Standard Alternator Protection( Over Voltage , Over Speed & Under Voltage, Under Speed Warning & Shutdown). C) Canopy : Cpcb / Arai Approved Standard Canopy With Weatherproof, Powder Coated Accoustic Enclosure For Dg Set For Sound Attenuation Fabricated From Crca Sheet Steel (Structure) Including Sidewals & Filled With Glasswool (96Kg/M3) /Pu Foam. As Per Is8183 And The Thickness Of The Doors Should Be 28/40/50/85 Mm As Per Rating . All Doors/Opening Are Sealed With Neoprene /Epdn Gaskets. The Dg Set Has Inbuilt / External In Fuel Tank To Run 6 To 8 Hrs Along With Def Tank (As Per Oem Standards). There Should Be Provision Of Protection And Tripping Of Dg Set For Temperature Greater Than 50 Degree Centigrade. The Enclosure Should Be Suitable For Following Capacity Dg Sets And Alternator. Noise Level Shall Be Less Than 75 Db At A Distance Of 1 Mtrs. In Open Free Field Environment As Per Iso 8528 Part 10 Duly Certified By Authorised Agency Etc. D) Instruments : Electronic / Mechanical Governor, Manual & Electric Start ,Batteries With Battery Charger, Electronic Fuel System, Advanced After Treatment System (Ats), Exhaust Gas Recirculation(Egr) System Along With Diesel Oxidation Catalyst(Doc) And Selective Catalytic Reduction (Scr) , Supply Module And Dcu To Control And Monitor Def. Engine Instruments Panel Should Have Microprocessor Based Genset Monitoring System Capable Of Displaying Running Hour, Rpm, Lubbrication Oil Pressure Indication, Lubrication Oil Temperature, Battery Charging Indication, Overspeed Indication, Fuel Level Etc. The Control Panel Should Equipped With Mccb/Acb Of Suitable Rating. E) Base Frame And Foundation : Both The Engine And Alternator Shall Be Mounted On Suitable Base Frame Made Of Ms Channel & Coupled Through A Flexible Coupling Or Close Coupled Which Shall Be Installed On Existing Cement Concrete Foundation And Vibration Isolation Arrangements As Per Recommendation Of Manufacturer. F) First Filling Of The Fuel Tank And Def Tank Shall Be Done By Contractor. G) Dg Set Will Be Offered For Inspection And Testing At Oems Works ( As Per Approved Qap ) In Presence Of Departmental Engineers .In Case Of 13 Hour Running Testing At Oems Works, Cost Of Actual Consumables Will Be Reimbursed. Note: 1. During The Dlp, The Contractor Shall Arrange For Servicing Of The Dg Set Through Authorized Dealer Of Oem, As Per The Manufacturers Guidelines. The Actual Cost Of Consumables Used During Servicing Will Be Reimbursed To The Contractor By The End User Department. 2. Manufacturer / Oem Must Have Its Authorized Service Dealer In Rajasthan. Which Can Provide Service Within 6 Hours Of Compalint Registration. , Providing, Fixing, Jointing, Testing & Commissioning Of Medium Duty Ms B Class Pipes Conforming To Is 3589 / 1239 Part-I For Dg Exhaust Applications (Beyond 1.5 Mtr. Length) Including Cutting, Welding Etc & Fittings Like Elbows,Flanges, Tapers, Reducer, Gaskets Etc. Fixing The Pipe On The Wall/Ceiling With Suitable Clamps, Hanger And Nuts Bolts . Including The Cost Of Thermal Insulation With 50 Mm Thick Layers Of Lrb Rock Wool As Per Is : 8183-1993 (64 Kg/M3 Density) & 26 Swg Aluminium Sheet Claddings Etc Complete As Required Complete In All Respect. (Cost Of Steel Structure For Exhaust Pipe Will Be Paid Extra). All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 150 Mm Dia , Supply Installation Testing and Commissioning of Plc Based Auto Main Failure (Amf) Panel Fabricated From Crca Sheet Steel 2 Mmthick , Powder Coated Finish , Engine Start & Stop Commands, Control Relays , Ammeter & Voltmeter With Selector Switches, Control & 2 Nos 4 Pole Power Contactors With 2 No. Of Required Size 4 Pole Mccb, Timers, Electronic Hooter ,Visual & Alarm Indication For Faults, Ups, Operator Interface Panel Complete In All Respect Suitable For Following Capacity Dg Sets: Appropriate Test Certificate/ Report Of Product/Accessories From Oem/Panel Manufecturer Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 100 To 140 Kva , Plate Earthing As Per Is:3043 With Copper Earth Plate Of Purity 95% Of Size 600Mm X 600Mm X 3.0Mm By Embodying 3 Mtr. Below The Ground Level With 20 Mm Dia. G.I. B Class Watering Pipe ,Including All Accessories Like Nut, Bolts, Reducer, Nipple, Wire Meshed Funnel, And Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height 250 To 300 Mm. And Embodying The Pipe Complete With Alternate Layers Salt And Coke/ Charcoal, Testing Of Earth Resistance For Value Of 5 Ohms Or Less As Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . , Supply & Laying Following Size Earth Strip In Horizontal Or Vertical Run In Surface By Means Of Earth Strip Dmc Insulator Including Riveting/ Soldering/ Welding, Jointing Shall Be Done By Overlapping And With 2 Set Of Brass (For Cu Strip) / Gi (For Gi Strip) Nut Bolt & Spring Washer Spaced At 50Cm Making Connection Etc. As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 25Mm X 3Mm Copper Strip , Supply & Laying Following Size Earth Strip In Horizontal Or Vertical Run In Surface By Means Of Earth Strip Dmc Insulator Including Riveting/ Soldering/ Welding, Jointing Shall Be Done By Overlapping And With 2 Set Of Brass (For Cu Strip) / Gi (For Gi Strip) Nut Bolt & Spring Washer Spaced At 50Cm Making Connection Etc. As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 20Mm X 3Mm G.I. ( Hot Dipped ) Strip , Supply & Laying Following Size Earth Strip In Horizontal Or Vertical Run In Surface By Means Of Earth Strip Dmc Insulator Including Riveting/ Soldering/ Welding, Jointing Shall Be Done By Overlapping And With 2 Set Of Brass (For Cu Strip) / Gi (For Gi Strip) Nut Bolt & Spring Washer Spaced At 50Cm Making Connection Etc. As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 25Mm X 3Mm G.I. ( Hot Dipped ) Strip , Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Arrmoured Aluminium Cable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv With H4- Grade Electrolytic Aluminium Conductor Confirming To Is 8130 Of Purity 99.6 %, Round / Flat Strip Armouring Of Cables, Inner / Outer Sheath Confirming To Is:5831 In Existing Reinforced Cement Concrete / Hume / Stoneware / Pvc Pipe/ Open Duct/Cable Trench / Cable Tray(With Cable Tie) Including Testing Etc. As Required Of Following Size. Oem Must Have Its Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 120.0 Sq. Mm 3.5 Core , Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Armoured Copper Cable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv With Electrolytic Grade Copper Made Of Copper Rods Confirming To Is 613-1964, Of Purity 99.7 %, Round / Flat Strip Armouring, Inner / Outer Sheath Confirming To Is:5831 In Existing Reinforced Cement Concrete / Hume / Stoneware / Pvc Pipe/ Open Duct/Cable Trench / Cable Tray(With Cable Tie) Including Testing Etc. As Required Of Following Size. Oem Must Have Its Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 2.5 Sq. Mm 6 Core , Supplying And Making One End Termination With Nickel Plated Heavy Duty Brass Single Compression Gland (As Per Is 12943-1990)) Sibg Type Consisting Of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring, Compression Nut, Heavy Duty Aluminium Lugs (As Per Is 8309 -1993) Duly Crimped With Crimping Tool, Pvc Tape As Per Is 8337-1976 Of Following Size Of Pvc Insulated & Pvc Sheathed/ Xlpe Aluminium Conductor Cable Of 1100 Volt Grade As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 3 X 120.0 Sq.Mm , Supply, Fabricating & Installing Following Sizes Of Perforated Powder Coated Ms Cable Tray With Perforation Not More Then 17.5% In Convenient Section Including Horizontal And Vertical Bends, Reducers Tees,Cross Members And Other Accessories As Required And Duly Suspended From The Ceiling With Gi Suspenders Including Gi Bolts & Nuts , Fastners, Supports Etc. As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . 150Mm X 50Mm X 1.6Mm , Earth Work In Excavation/ By Mechanical Means (Hydraulic Excavator) / Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5M In Width As Well As 10 Sum On Plan) Including Disposal Of Excavated Earth, Lead Upto 50 M And Lift Upto 1.5 M, Disposed Earth To Be Levelled And Neatly Dressed: , Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level With Cement Mortar 1:6 ( 1-Cement : 6-Sand). , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. , Plaster On New Surface On Wall In Cement Sand Mortar 1:4 Including Racking Of Joints Etc. Complete Fine Finish : 12Mm Thick