Tender For Renovation Of Record Room At Zone 6 Office
Tender Value
9.31 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
3 days left
EMD
93163
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Record Room At Zone 6 Office
BOQ
| Sl. No. | Item Description |
| 1 | Dismentling existing plaster including disposal of refuse as directed by engineer in charge within a distance of 60 meters |
| 2 | 12 mm thick cement plaster in 1:4 cement, fine sand etc |
| 3 | Finishing wall with putty brand of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture etc. |
| 5 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. |
| 6 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 7 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 8 | Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required 2x2.5 sq mm +1x2.5 sqmm earth wire DSR-1.14.2 |
| 9 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulatedmultistrand single core copper conductor cable in pvc conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in the wall and partly laid in slab with, GP Box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc complete in all respect as directed including matching colour wash. SOR-2018 Item 138 (C) |
| 10 | suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 |
| 11 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 12 | Wiring point for fan with 1.5sq mm FR PVC insulated copper conductor cable in 25mm dia heavy duty etc all compete. |
| 13 | Supply and fitting of ceiling fan Usha, Khetan, Bajaj I.S.I mark including all complete. |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 15 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 16 | 2 Bay Double Face movable 2130 mm H x 1830 L x915 D |
| 17 | 2 Bay single Face movable 2130 mm H x 1830 L x |
| 18 | TAX18% Please Enable Macros to View BoQ information ` |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
TodayJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender