Tender For Construction Of An Reinforced Cement Concrete Shed At Ambedkar Smriti Sthal, Brahma Nagar (Gudar Basti), In Sisamau North Under Ward-59 Zone-04.
Tender Value
9.96 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
2 days left
EMD
99612
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of An Reinforced Cement Concrete Shed At Ambedkar Smriti Sthal, Brahma Nagar (Gudar Basti), In Sisamau North Under Ward-59 Zone-04.
BOQ
| Sl. No. | Item Description |
| 1 | E/W in Excavation in trenches for foundation pipe cable in ordinary soil including 1.5left and 50m and dressing of side and ramming of bottom and disposal of surplus axcavated earth Earth work in execavation in foundation and under plinth area lift 1.5 m lead 30 m with all charges complete. |
| 2 | Concrete/R.C.C. Work-Providing and laying In position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement : 4 coarse sand (zone-Ill): 8 graded Brick aggregate 40 mm (nominal size) |
| 3 | Concrete/R.C.C. Work-RCC work with cement approved coarse sand and 20mm approved stone ballast in proportion for raft foundation with 1:1.5:3 (1 cemnt 1.5 C. sand 20 mm size stone ballast) RCC work with cement approved coarse sand and 20mm approved stone ballast in proportion for raft foundation with 1:1.5:3 (1 cemnt 1.5 C. sand 20 mm size stone ballast) including bending binding and fixing of reinfocement in position casting cutting of wall and satisfaction of the engineer in charge including cost of all material etc all complete (ch-5, sn-15, ref- 5.2.2) |
| 4 | RCC work with cement approved coarse sand and 20mm approved stone ballast in proportion for raft foundation with 1:1.5:3 (1 cemnt 1.5 C. sand 20 mm size stone ballast) Reinforced cement concrete work In beams, suspended floors, roofs having slope up to 15• landlngs, balconies, shelves, chaDas, lintels, bands, plaln window sllls, staircases and splral stair cases above pllnth level up to floor five level, excluding the cost of centering, shuttering, finishing andreinforcement- |
| 5 | Retaining walls, return walls, walls (any thickness) Including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. Centering and shuttering including strutting, propping etc. and removal of form work for (Upto 5th Floor) : |
| 6 | steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in positon and biding all comp Steel reinforcement for R.C.C. work Including straightening, cutting, bending, placing in position and binding all complete upto plinth level.- |
| 7 | Providing and fixing 18 mm thick Granite (gang saw cut), mirror polished Providing and fixing 18 mm thick Granite (gang saw cut), mirror polished, premoulded and prepollshed, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), Joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Slab area upto 0.50 |
| 8 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making_curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-In-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 9 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle Iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle Iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces- |
| 10 | Painting on iron work with one coat of priming coat and two coat with superior synthetic enamel including supply of all material etc all comp. Painting on iron work with one coat of priming coat and two coat with superior synthetic enamel including supply of all material etc all comp. |
| 11 | Brick work with common burnt clay (non modular) bricks of class -150 in super structure Cement mortar 1:4 (1 cement: 4 coarse sand) Brick work with common burnt clay (non modular) bricks of class -150 in super structure above plinth level up to floor V level in all shapes and sizes. Cement mortar 1:4 (1 cement: 4 coarse sand)- |
| 12 | Providing and laying Vitrified tiles In different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % Size of TIie 600x600 mm Providing and laying Vitrified tiles In different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, In all colours & shade, In skirting. riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), Jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the init with white cement & matching pigments etc. complete. |
| 13 | Providing and laying and jointing of 300mm dia RCC NP-2 hume pipe with all complete Providing and laying and jointing of 300mm dia RCC NP-2 hume pipe with all complete- |
| 14 | Supply and Fixing of recess mounting round 18 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. AR Supply and Fixing of recess mounting round 18 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect |
| 15 | Wiring point for light with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG copper earth continuity wire, piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite-sheet etc. But in PVC cunduct with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduct. Wiring points in surface Cinduct with PVC insulated 1100 V grade cable. complete in all respects, a directed. Wiring point for light with 1.5sq mm FR PVC insulated single core copper conductor cable in pvcconduct pipe on surface, complete with 14 SWG copper earth continuity wire, piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite-sheet etc. But in PVC cunduct with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduct. Wiring points in surface Cinduct with PVC insulated 1100 V grade cable. complete in all respects, a directed. |
| 16 | Construction of manhole chamber of 0.60x0.60x0.90m internal size with b/w, plaster, cover, C.I. sheet, labour T&P etc required for proper completion of work. |
| 17 | Construction of gullypit 0.60x0.60x0.75 as per KNN design etc all work Construction of gullypit of 0.60x0.60x0.75 m internal size with jali, labour, T&P etc, required for proper completion of work. |
| 18 | White Vitreous china Orlssa pattern W.C. pan of size 580x440 mm with Integral Itvoe foot rests Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, Including cutting and making good the walls and floors wherever required:- |
| 19 | 15 mm nominal outer dia Pipes Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, Including all CPVC plain & brass threaded fittings, 1/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same Including testing of Joints complete as per direction of Engineer In Charge. Concealed work, Including cutting chases and making good the walls |
| 20 | providing and placing on terrace polyethylene water storage tank etc all comp providing and placing on terrace polyethylene water storage tank etc all comp- |
| 21 | Cartage of materials by head load up to 90.0mtr distance including loading/unloading with all charges complete. Cartage of materials by head load up to 90.0mtr distance including loading/unloading with all charges complete |
| 22 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more.\\" \\"Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-chargeNote - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. |
| 23 | Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 24 | Finishing walls with exterior emulsion paint (Apex) Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/l0sqm including one coat of primer applld @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required fororooer comoletlon of work.for two coat |
| 25 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender