Tender For Increasing Capacity Existing 220/132/33 Kv Substationsector-20 Noida From 3X160 Mva To 4X160 Mva Alongwith Associated Bay Work Including Supply At 220 Kv Substation Sector-20 Noida.
Tender Value
75.58 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
20 days left
EMD
75000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Increasing Capacity Existing 220/132/33 Kv Substationsector-20 Noida From 3X160 Mva To 4X160 Mva Alongwith Associated Bay Work Including Supply At 220 Kv Substation Sector-20 Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Equipment Erection WorkSorting, stacking, shifting from store to site and erection of 220/132 kV main & auxiliary lattice steel structures (CTM, DTM, BTM, ETM, ATM, AXM, BBL, BTI, BCT, ALP, YMM, XMM, etc.) including columns, beams, peaks, masts and bracings, complete with alignment, plumbing, hole matching, cutting/drilling if required, and assembly using nuts, bolts & washers, as per approved drawings, inclusive of all labour, T&P, handling, safety arrangements and incidental works to complete the job in all respects. |
| 2 | Installation, testing and commissioning of following equipment as per approved technical specifications, manufacturer’s manuals and instructions of Engineer-in-Charge, including shifting/handling of all equipment and panels from store to installation site, complete with all labour, tools & plants (T&P), testing instruments and incidental works required to complete the job in all respects. |
| 3 | 245 KV SF-6 Circuit Breaker |
| 4 | 245 KV Bus Isolator (motorised) |
| 5 | 245 KV Tandem Isolator (motorised) |
| 6 | 245 KV Current Transformer |
| 7 | 245/132 KV CT/PT Junction Box |
| 8 | 245 KV Post Insulator for support |
| 9 | 198 KV Lighting Arrestor |
| 10 | 145 KV Current Transformer |
| 11 | 145 KV SF-6 Circuit Breaker |
| 12 | 145 KV Bus Isolator without Earth Switch (motorised) |
| 13 | 145 KV Line Isolator with Earth Switch (motorised) |
| 14 | 145 KV Tandom Isolator (motorised) |
| 15 | 120 KV Lighting Arrestor |
| 16 | 145 KV Post Insulator for support |
| 17 | 145 KV Potential Transformer |
| 18 | 220/132KV 160 MVA T/F Control & Relay Panel |
| 19 | 132 KV Feeder protection Control & Relay Panel |
| 20 | Earthing of equipment/structuresMaking Delta earthing for 198 kV / 120 kV Lightning Arresters and transformer neutral, using 40 mm dia × 3000 mm long conical MS earth electrodes, driven into the ground in rectangular/triangular formation as per approved drawings, and interconnecting all 3/6 electrodes with 75×10 mm / 50×6 mm MS flat laid on edge, complete in all respects as per specifications and drawings, including all labour, materials, tools & plants. |
| 21 | 198/120KV LA (Rectangular shape by 06 electrodes)with 40 mm dia round bar. |
| 22 | 160MVATransformer(Triangular shape by 03electrodes)with 40mm dia round bar |
| 23 | Complete earthing of main and auxiliary structures and equipment, including transformer body and neutral point (CTs, PTs, LAs, CBs, isolators, panels, transformers, etc.), by cutting, straightening, bending, laying MS flats 700 mm below ground and above ground, and welding with main earth mat and with the equipment to be earthed, complete with excavation of trenches, backfilling and restoration as required to complete the work in all respects.(MS flats shall be supplied by the Department.) |
| 24 | MS flat of size 75x10 mm |
| 25 | MS flat of size 50 x6 mm |
| 26 | MS flat of size 25 x6 mm |
| 27 | Painting of MS flats of various sizes, including cleaning of rusted surfaces by wire brushing/scraping, applying one coat of red oxide primer followed by two coats of bus green paint, complete in all respects to finish the work. |
| 28 | MS flat of size 75x10 mm |
| 29 | MS flat of size 50 x6 mm |
| 30 | MS flat of size 25 x6 mm |
| 31 | 220/132 kV Bus Bar Strengthening, Jumpering and Stringing WorksComplete dismantling of following equipment along with associated structures, using crane and manpower, including disconnection/opening of jumpers, earthing and control cables, dismantling of structures, stacking of all structural members as per BOM, cutting of foundation bolts using gas cutter, and shifting/transportation of all dismantled materials to store, complete with all labour, tools & plants (T&P), handling equipment and incidental works to complete the job in all respects. |
| 32 | 245 KV Current Transformer |
| 33 | 145 KV Current Transformer |
| 34 | 145 KV Circuit Breaker |
| 35 | 145 KV isolator |
| 36 | 120 KV L.A. |
| 37 | 132 KV Post Insulator |
| 38 | 145 KV P.T. |
| 39 | 132 KV,40 MVAR Capacitor Bank with all accessories |
| 40 | Complete dismantling of 132 kV bus of single Tarantula/Panther conductor for spans of various lengths, including opening/removal of jumpers, clamp-connectors and bolted type tension fittings, de-hoisting of disc insulators, and shifting/stacking of dismantled materials from site to store as per instructions of JE/SDO, complete with all labour, tools & plants and all associated works to satisfactorily complete the job as per technical specifications. |
| 41 | 132 KV Main bus single Tarantulla (24 mtr length of span) |
| 42 | 132 KV Main bus single Panther (24 mtr length of span) |
| 43 | Shifting/handling of various materials such as CTs, PTs, isolators, conductors, tower/structure parts, cables, etc., for construction of new 220 kV bus-coupler bay, using crane and/or manpower, to designated safe locations, complete with all labour, tools & plants (T&P) and incidental works to complete the job in all respects at 220 kV S/S, Sector-20, Noida. |
| 44 | Extension and stringing of 220 kV main/transfer bus for spans of various lengths, including cutting and bending of conductor, fixing of double bolted type tension/suspension fittings, spacers, jumper connections of bus sections, making series connection of disc insulators, complete cleaning of disc insulators for all phases using approved liquid cleaner, hoisting of disc insulator strings below beam, and proper sagging of bus conductor as per specifications, including shifting of materials from store to erection site and all other associated works to satisfactorily complete the job as per approved drawings and technical specifications. |
| 45 | 220 KV main bus twin tarantulla conductor (18 mtr length of span) |
| 46 | 220 KV Transfer bus twin zebra conductor (18 mtr length of span) |
| 47 | Extension and stringing of 132 kV main bus for spans of various lengths, including cutting and bending of conductor, fixing of double bolted type tension/suspension fittings, spacers, jumper connections of bus sections, series connection and thorough cleaning of disc insulators for all phases using approved liquid cleaner, hoisting of disc insulator strings below beam, and proper sagging of bus conductor as per specifications, including shifting of materials from store to erection site and all other associated works to satisfactorily complete the job as per approved drawings and technical specifications. |
| 48 | 132 KV Main Bus twin Moose (24 mtr length of span) |
| 49 | 132 KV Transfer bus Single Tarantulla (24 mtr length of span) |
| 50 | Stringing of 132 kV jack bus with single Moose conductor for spans of various lengths, including cutting and bending of conductor, fixing of single/double bolted type tension fittings, hoisting of disc insulators, and shifting of required materials from store to erection site as per instructions of JE/SDO, complete with all labour, tools & plants and all associated works to satisfactorily complete the job as per approved drawings and technical specifications. |
| 51 | 36 mtr length of span |
| 52 | 12 mtr length of span |
| 53 | Stringing of 220 kV jack bus with twin Zebra conductor for spans of various lengths, including cutting and bending of conductor, fixing of double bolted type tension fittings, hoisting of disc insulators, and shifting of required materials from store to erection site as per instructions of JE/SDO, complete with all labour, tools & plants and all associated works to satisfactorily complete the job as per approved drawings and technical specifications.i)36 mtr length of span |
| 54 | Jumpering and interconnection of 220 kV & 132 kV equipment (CTs, PTs, LAs, CBs, LIs, BIs, TIs, etc.) using single/twin Moose/Zebra conductors, including cutting and bending of conductors, fixing and tightening of clamps and fittings, and all other associated works required to complete the job in all respects as per approved drawings and technical specifications. |
| 55 | Laying, dressing and termination of control cables of specified sizes for connection with CTs, PTs, CBs, isolators, C&R panels, RTCC, transformer turrets (WTI, OTI, Buchholz relay, PRV), cooling fans, oil pumps, OLTC, marshaling box, RTCC, etc., including carriage/handling of cable drums from store to site, proper dressing, glanding and ferruling as per approved cable schedule and drawings, and all other associated works to complete the job in all respects as per technical specifications, for 132 kV Line Bay – 03 Nos. and 160 MVA Transformer Bay – 01 No. |
| 56 | 2 core x 2.5 sqmm |
| 57 | 4 core x 2.5 sqmm |
| 58 | 6 core x 2.5 sqmm |
| 59 | 10 core x 2.5 sqmm |
| 60 | Supply and fixing of new-generation, energy-saving, environment-friendly, long-life outdoor LED high-beam flood light, made of pressure die-cast aluminium body, suitable for outdoor use, with 150 W high-power LED light source, exclusively designed polycarbonate cover, and in-built electronic driver, complete and suitable for 220 V AC input supply, conforming to ISI standards, of approved make (CGL / Havells / Philips / Bajaj), including all electrical connections, testing and commissioning, complete in all respects. |
| 61 | Providing, fixing and installation of various types of boards such as Glow Sign Boards, Shutdown Notice Boards, Instruction Boards, etc., at 220 kV Substation, Sector-20, Noida, as per approved specifications, drawings and directions of Engineer-in-Charge, complete in all respects. |
| 62 | Providing, fixing and installation of Glow Sign Board of size 10 ft × 6 ft for Substation Single Line Diagram, to be installed in the control room building, illuminated with adequate number of LED tube lights, made of acrylic sheet, complete with back support frame and proper fixing arrangement, including all materials, fittings, labour and incidental works to complete the job in all respects as per specifications and directions of Engineer-in-Charge. |
| 63 | Providing and fixing aluminium name plates made of 2 mm thick aluminium sheet, covered with 3M HIP retro-reflective sheet, of specified sizes, with equipment details/names written using 3M HIP retro-reflective sheeting as per prescribed colour scheme, fixed on already installed equipment/structures in the switchyard using nuts and bolts, complete with cost of plates, fasteners, all miscellaneous materials, tools & plants and labour, as per specifications and directions of Engineer-in-Charge: |
| 64 | 300mm x200mm |
| 65 | 450mm x 250mm |
| 66 | 500mm x 250mm |
| 67 | Providing and fixing R-Y-B phase plate sets, each set comprising three circular plates (Red, Yellow and Blue) of 250 mm diameter, made of 2 mm thick aluminium sheet, with face fully covered with 3M HIP retro-reflective sheet in respective phase colours, and fixed on already installed equipment/structures at the substation using suitable size G.I. nuts and bolts, complete with all materials, fasteners, labour, tools & plants and incidental works to complete the job in all respects as per specifications and directions of Engineer-in-Charge. |
| 68 | Erection work of 160 MVA 220/132 KV T/F Shifting/dragging of main tank of new 160 MVA, 220/132 kV power transformer from road location to transformer plinth level at 220 kV Sub-Station, Sector-20, Noida, using suitable handling arrangements, as per directions of JE/SDO, complete with all labour, tools & plants and incidental works to complete the job in all respects. |
| 69 | Upto 20 Mtrs distance |
| 70 | Additional shifting of 20 mtrs. (each 5 Meter per job) |
| 71 | Complete erection of 160 MVA, 220/132 kV power transformer, including all accessories such as HV/LV/neutral bushings and turrets, radiator banks, conservator tank, oil pipelines and interconnecting pipes, motor-driven tap changer mechanism, marshalling box, NIFPS system with associated pipelines, and all other accessories, complete with alignment, fixing and assembly, to satisfactorily complete the job in all respects as per approved drawings, technical specifications and directions of Engineer-in-Charge. |
| 72 | Centrifuging, dehydration and filtration of transformer oil for 160 MVA, 220/132 kV power transformer in main tank, radiators and/or oil tanker, by connecting 6/12 KL oil centrifuging machine with new filters, for dehydration of oil and windings, including periodic testing and recording of BDV of oil and IR & PI values of transformer windings until required values are achieved, and filling, topping-up of oil in main tank, radiators, conservator tank and OLTC, etc., as per standard practices and directions of Engineer-in-Charge, complete in all respects. |
| 73 | Erection of RTCC panel for new 160 MVA, 220/132 kV power transformer, including shifting/handling of RTCC panel from store/designated place to control room, positioning and fixing, control cable termination as per approved cable schedule, and earthing of the RTCC panel, complete with all labour, tools & plants and incidental works to complete the job in all respects as per technical specifications and directions of Engineer-in-Charge. |
| 74 | Sampling and testing of transformer oil at CPRI laboratory, including collection, sealing and transportation of each oil sample in standard sampling bottles (adequate number of bottles to be arranged by the contractor), complete in all respects.The following tests shall be conducted for each sample:(i) Breakdown Voltage (BDV)(ii) Moisture Content(iii) Dissolved Gas Analysis (DGA) |
| 75 | Submission of inspection charges for Electrical Safety Clearance to the Directorate of Electrical Safety, Lucknow, Uttar Pradesh, for carrying out statutory inspection of 160 MVA, 220/132 kV power transformer and obtaining charging clearance, as per applicable statutory norms.(Amount to be reimbursed on actual basis.) |
| 76 | Supply, installation, testing and commissioning of High Velocity Water Spraying (HVWS) system for 160 MVA power transformer, including laying of fire-detection/water spray pipeline, installation of valves, quartzoid bulbs, HVWS nozzles, supports and all associated materials, complete in all respects as per approved drawings, relevant standards and directions of Engineer-in-Charge. |
| 77 | Supply, installation, testing and commissioning of quick-opening flood/deluge valve, HD make, 150 NB, suitable for maximum working pressure of 10 kg/cm², complete with all accessories, fittings and supports, as per technical specifications, of approved make (HD / Mather & Platt / equivalent), complete in all respects. |
| 78 | Supply, installation and commissioning of gate valve (sluice valve / butterfly valve) conforming to IS:14846, complete with all accessories and fittings, of approved make (Zoloto / Kartar / Sir), as per technical specifications and directions of Engineer-in-Charge.150 NB |
| 79 | Supply, installation, testing and commissioning of “Y” type strainer, suitable for maximum working pressure of 7 kg/cm², complete with all accessories and fittings, of approved make (Kartar / Sir / Kalpana / Agro), as per technical specifications and directions of Engineer-in-Charge. |
| 80 | Supply and laying of G.I. pipe, B-class, for water pipeline supports, conforming to IS:1239, complete with elbows, tees, sockets, reducers, gaskets, clamps and all fittings, including grouting, jointing and anti-corrosive treatment with black paint, complete in all respects as per specifications and directions of Engineer-in-Charge.80 NB |
| 81 | Supply and laying of G.I. pipes of various sizes, B-class, for detection water pipeline, conforming to IS:1239, as per approved drawings, complete with elbows, tees, sockets, reducers, gaskets, U-clamps and all fittings, including surface preparation and painting with two coats of red and blue paint, complete in all respects as per specifications and directions of Engineer-in-Charge. |
| 82 | 150NB |
| 83 | 100NB |
| 84 | 40 NB |
| 85 | Supply and installation of flanges of various sizes conforming to IS:1538, as per approved drawings, including proper butt welding with pipes, provision of gaskets/packing, and coupling with nuts and bolts, complete with all materials, labour, tools & plants and incidental works to complete the job in all respects as per specifications and directions of Engineer-in-Charge. |
| 86 | 150NB |
| 87 | 100NB |
| 88 | Supply, installation, testing and commissioning of High Velocity Water Spray (HVWS) nozzles, suitable for operating pressure of 3.5 kg/cm² with spray cone angle of 90°, complete with all fittings, accessories, labour, tools & plants, and incidental works to complete the job in all respects as per specifications and directions of Engineer-in-Charge. |
| 89 | Supply, installation, testing and commissioning of Quartzite Bulb Detector (QBD), suitable for operation at 90°C, with actuation time of 10–12 seconds at rated temperature, complete with all accessories, fittings, labour, tools & plants and incidental works to complete the job in all respects as per technical specifications and directions of Engineer-in-Charge. |
| 90 | Supply, installation, testing and commissioning of fixed differential type pressure switch, suitable for pressure range 1–10 kg/cm², complete with all accessories and fittings, of approved make (Danfoss / Indfoss), as per technical specifications and directions of Engineer-in-Charge. |
| 91 | Supply, installation and commissioning of pressure gauge conforming to IS:3624, with accuracy class 5%, complete with all fittings and accessories, as per technical specifications and directions of Engineer-in-Charge. |
| 92 | Supply portion Supply of bolted type tension fittings, suitable for various conductors, complete with hot-dip galvanized nuts, bolts and hardware fittings, including D-shackles, D-sockets, ball hooks, yoke plates, D-clips and tension clamps, supplied as a complete hardware assembly set, as per approved technical specifications. |
| 93 | Supply of bolted type tension fitting suitable for single Moose conductor, complete with hot-dip galvanized nuts, bolts and all associated hardware, including D-shackle, D-socket, ball hook, yoke plate, D-clip and tension clamp, supplied as a complete hardware assembly set, as per approved technical specifications. |
| 94 | Supply of bolted type tension fitting suitable for single Tarantula conductor, complete with hot-dip galvanized nuts, bolts and all associated hardware, including D-shackle, D-socket, ball hook, yoke plate, D-clip and tension clamp, supplied as a complete hardware assembly set, as per approved technical specifications. |
| 95 | Supply of bolted type tension fitting suitable for twin ACSR Moose conductor, complete with hot-dip galvanized nuts, bolts and all associated hardware, including D-shackles, D-sockets, ball hooks, yoke plates, D-clips and twin tension clamps, supplied as a complete hardware assembly set, as per approved technical specifications. |
| 96 | Supply of bolted type tension fitting suitable for twin Tarantula conductor, complete with hot-dip galvanized nuts, bolts and all associated hardware, including D-shackles, D-sockets, ball hooks, yoke plates, D-clips and twin tension clamps, supplied as a complete hardware assembly set, as per approved technical specifications. |
| 97 | Supply of bolted type tension fitting suitable for twin Zebra conductor, complete with hot-dip galvanized nuts, bolts and all associated hardware, including D-shackles, D-sockets, ball hooks, yoke plates, D-clips and twin tension clamps, supplied as a complete hardware assembly set, as per approved technical specifications. |
| 98 | Supply of bolted type suspension fitting suitable for single Moose conductor, complete with hot-dip galvanized nuts, bolts and all associated hardware, including suspension clamp, D-shackle, ball hook, yoke plate and D-clip, supplied as a complete hardware assembly set, as per approved technical specifications. |
| 99 | Supply of bolted type suspension fitting suitable for twin Moose conductor, complete with hot-dip galvanized nuts, bolts and all associated hardware, including twin suspension clamp, D-shackles, ball hooks, yoke plate and D-clips, supplied as a complete hardware assembly set, as per approved technical specifications. |
| 100 | Supply of PG clamp suitable for Tarantula-to-Tarantula conductor connection, complete with hot-dip galvanized hardware, including bolts, nuts and washers, as per approved technical specifications. |
| 101 | Supply of PG clamp suitable for Zebra-to-Zebra conductor connection, complete with hot-dip galvanized hardware, including bolts, nuts and washers, as per approved technical specifications. |
| 102 | Supply of PG clamp suitable for Zebra-to-Moose conductor connection, complete with hot-dip galvanized hardware, including bolts, nuts and washers, as per approved technical specifications. |
| 103 | Supply of PG clamp suitable for Moose-to-Moose conductor connection, complete with hot-dip galvanized hardware, including bolts, nuts and washers, as per approved technical specifications. |
| 104 | Supply of PG clamp suitable for Tarantula-to-Zebra conductor connection, complete with hot-dip galvanized hardware, including bolts, nuts and washers, as per approved technical specifications. |
| 105 | Supply of bimetallic 132 kV isolator clamp, made of LM-6 aluminium alloy, suitable for Zebra conductor, complete with hot-dip galvanized nuts, bolts and washers, as per approved sample and technical specifications. |
| 106 | Supply of spacer, 2-bolt type, 250 mm, suitable for twin Zebra conductor, complete with hot-dip galvanized nuts, bolts and washers, as per approved technical specifications. |
| 107 | Supply of spacer, 2-bolt type, 250 mm, suitable for twin Moose conductor, complete with hot-dip galvanized nuts, bolts and washers, as per approved technical specifications. |
| 108 | Supply of spacer, 2-bolt type, 250 mm, suitable for twin Tarantula conductor, complete with hot-dip galvanized nuts, bolts and washers, as per approved technical specifications. |
| 109 | Supply of bus post insulator clamp suitable for Moose conductor, complete with hot-dip galvanized nuts, bolts and washers, supplied as a complete assembly, as per approved technical specifications. |
| 110 | Supply of bus post insulator clamp suitable for twin Zebra conductor, complete with hot-dip galvanized nuts, bolts and washers, supplied as a complete assembly, as per approved technical specifications. |
| 111 | Supply, installation, testing and commissioning of heavy-duty 2-ton split air conditioner, complete with all accessories and 5 kVA stabilizer, with copper tubing, as per approved technical specifications, including mounting, electrical connections and commissioning, complete in all respects. |
| 112 | Supply of portable AFFF mechanical foam type fire extinguisher, trolley-mounted, 50-litre capacity, complete with initial charge, hose pipe, nozzle and all accessories and fittings, conforming to IS:1024, complete in all respects as per technical specifications. |
| 113 | Supply of Dry Chemical Powder (DCP) fire extinguisher, stored pressure type, 4.5 kg capacity, complete with initial charge, hose pipe, nozzle and all accessories and fittings, conforming to IS:1024, complete in all respects as per technical specifications. |
| 114 | Supply of Carbon Dioxide (CO₂) fire extinguisher, 22.5 kg capacity, conforming to IS:2878 (1986), complete with all accessories and fittings, as per technical specifications. |
| 115 | Supply of Carbon Dioxide (CO₂) fire extinguisher, 11 kg / 9 kg capacity, conforming to IS:2878 (1986), complete with all accessories and fittings, as per technical specifications. |
| 116 | Supply of Carbon Dioxide (CO₂) fire extinguisher, 4.5 kg capacity, conforming to IS:2878 (1986), complete with all accessories and fittings, as per technical specifications. |
| 117 | Supply of fire sand bucket, 10-litre capacity, made of heavy-gauge galvanized mild steel, painted red externally with “FIRE” marking, conforming to IS:2546, complete in all respects as per technical specifications. |
| 118 | Supply of fire sand bucket stand, suitable for 12 nos. buckets, made of galvanized mild steel, painted red with “FIRE” marking, conforming to IS:2546, complete in all respects as per technical specifications. |
| 119 | Supply of MS flats and/or MS rounds of specified sizes, conforming to relevant IS specifications, complete with cutting to required lengths and delivery at site, as per approved specifications and directions of Engineer-in-Charge. |
| 120 | 75x10 mm MS Flat |
| 121 | 50x6 mm MS flat Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender