Tender for Tender for Work Of Maintenance 33 Kv And 11 Kv Incoming And Outgoing Vcb Pannel Under O And M Head Etd-Ii Azh
Tender Value
16.02 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
1 days left
EMD
16000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Azamgarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Maintenance 33 Kv And 11 Kv Incoming And Outgoing Vcb Pannel Under O And M Head Etd-Ii Azh
BOQ
| Sl. No. | Item Description |
| 1 | Survey of Substation |
| 2 | Checking of incomming & outgoing VCB Panel working and parts on Quarterly basis (once in a three (03) month) |
| 3 | Complete overhauling of Panel, insulation of bus bar with HT Tape, Empire Tape and cleaning of spouts |
| 4 | Complete Overhauling of Trolley and Manual and Motorised charging mechanism. |
| 5 | Repairing and adjusting of Tripping Assembly and circuit. |
| 6 | Repairing and adjusting of Closing Assembly and circuit. |
| 7 | Adjusting of tripping and closing timing of breaker by checking contact resistance of Vacuum Interrupter of VCB. |
| 8 | Replacement and Adjustment of Vacuum Interrupter |
| 9 | Repairing and Adjusting of shutter Assembly |
| 10 | Repairing and Adjusting of Interlocks |
| 11 | Servicing and adjusting of Spring charging Motor |
| 12 | Repairing of spouts with complete cleaning and adjusting |
| 13 | Complete cleaning of trench, tightening of cable boxes with rerouting of cable |
| 14 | Complete wiring of Pannels with checking of fuse and indicators |
| 15 | Complete testing of Tripping system of Breaker for successful Tripping |
| 16 | Replacement of Damage CT/PT Including Wiring |
| 17 | Spare+Sundry Cost (Provided by Contractor) |
| 18 | Cam Shaft Assembly |
| 19 | Charging Motor Rectifier |
| 20 | Charging Spring |
| 21 | HRC Fuse 3.15 Amp |
| 22 | Indicators |
| 23 | Flexible Connections |
| 24 | Charging Gear Big with Bearing |
| 25 | Charging Gear Small with Bearing |
| 26 | Insulated Housing Assembly for VI |
| 27 | Tulip contact |
| 28 | Upper Terminal Assembly |
| 29 | Lower Terminal Assembly |
| 30 | Rack In Gear |
| 31 | Tripping Coil 24V |
| 32 | Tripping Plate |
| 33 | Rack out Gear |
| 34 | Copper Wire 1.5 mm |
| 35 | Crank Assembly |
| 36 | Drive Shaft |
| 37 | Charging Handle |
| 38 | I/O Spout Set Busbar Side |
| 39 | I/O Spout Set CT Side |
| 40 | Closing Assembly |
| 41 | Closing Coil (24 V DC) |
| 42 | TNC Switch |
| 43 | Pla Relay |
| 44 | Terminals |
| 45 | Limit Switches |
| 46 | HRC Fuse 2A, 6A |
| 47 | Charging Motor |
| 48 | Vacuum Interrupter of different make |
| 49 | Support Insulator |
| 50 | Copper Strip Busbar (3 Phase for 1 Meter) |
| 51 | Auxiliary Switch |
| 52 | MCB 32AMP, 3P |
| 53 | SPACE HETER |
| 54 | THERMOSTATE |
| 55 | Ampere Meter |
| 56 | Volt Meter Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender