Tender For Modernization Of Nandi Canal ( Rs: 1835.35 Lacs)
Tender Value
18.35 Crore
Estimated cost
Bid Submission
31 Aug 2026
26 days left
EMD
36.70 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modernization Of Nandi Canal ( Rs: 1835.35 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. |
| 5 | Dumping of stones Horizontal on Level including supply of stones. (stack Measurement reduced by 15%) with Contractor's Profit & GST. |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 7 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 kms also including ramming and watering of the earth in layers not exceeding 20 cm in trenchges, plinth, sides of foundation etc. complete. |
| 8 | Hand packing stones in wire-crates, excluding cost of crates and stones.(stack Measurement reduced by 15%) |
| 9 | Dumping of stones in horizontal on level excluding supply of stones. (stack Measurement reduced by 15%) |
| 10 | Dry stone pitching (any thickness) excluding cost of stones. On Horizontal (stack Measurement reduced by 15%) |
| 11 | Dry stone pitching (any thickness) excluding cost of stones. On slopes. (stack Measurement reduced by 15%) |
| 12 | Supply of stone Nallah. (stack Measurement reduced by 15%) including Contractors Profit & GST. |
| 13 | Supply of 4\\" * 4\\" mesh & (16' *16') Size of 4mm dia GI Wire as per ISI Specifications including all Carriages upto site of work. |
| 14 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 17 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 18 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns. |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms |
| 23 | Centering and shuttering including strutting, propping & removal of form work for edges of slab and breaks in floor Under 20 cm wide. |
| 24 | Centering and Shuttering including struting proping and Removal of Form Work Stairs (excluding landings) except spiral staircases. |
| 25 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) complete as per standard design Inside size 45x45 cm and 45 cm deep including cover with frame (light duty) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. COMPLETE JOB. |
| 26 | Providing and fixing of RCC Man hole cover with frame of size 450mmx450mm of approved quality and make complete. |
| 27 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportionof 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete job 450 mm dia. R.C.C. pipe |
| 28 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportionof 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete job 800mm dia RCC Pipe. |
| 29 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level . 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 30 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 31 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 32 | 12mm cement plaster of mix 1:6 (I cement: 6 fine sand). |
| 33 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 34 | Providing an fixing of UPVC doors and windows (Chowkats, Shutters, Both wire Guage Panelled and Glazed with complete fitting and installation all complete job. |
| 35 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :.Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 36 | Brick work in superstructure above plinth level upto Fifth Floor Level in cement mortar ratio 1:6 with Non Modular bricks. |
| 37 | FRAMES :Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Kiln Seasoned and chemically treated hollock wood. |
| 38 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type |
| 39 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 30mm ist class Kail wood. |
| 40 | Providing and fixing expansion hold fasteners on CC / R.C.C./brick masonry surface backing including drilling necessary holes and the cost of bolt etc. complete. Fastener with threaded dia 6mm. |
| 41 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm Kiln seasoned and chemically treated hollock wood |
| 42 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm |
| 43 | Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete : |
| 44 | Tower Bolt 100x10 mm |
| 45 | Tower Bolt 150x10 mm |
| 46 | Handle 125 mm |
| 47 | Handle 150 mm' |
| 48 | 150 mm hook and eyes |
| 49 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 50 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 51 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 52 | Providing & Fixing C.P. sink mixer of approved make jaguar/hindware/cera including cutting and making good the walls wherever required. |
| 53 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 16mm (Area of slab over 0.5 sqm) |
| 54 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510mm bowl depth 200mm |
| 55 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 56 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 57 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With ready mixed pink or grey primer on wood work (hard andsoft wood) having VOC content less than 50 grams/ liter |
| 58 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint ofrequired shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 59 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 60 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 61 | Providing and fixing ISI marked oxidized M.S. pressed butt hinges with necessary screws etc. complete: 125x65x2.12 mm |
| 62 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : |
| 63 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Outer walls, Inner walls. |
| 64 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 65 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 66 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 67 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.Size of tile 600x600 m |
| 68 | Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). 8.1.1 Raj Nagar plain white marble/Udaipur green marble/zebra black marble 16mm |
| 69 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specification. Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 70 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 71 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 72 | Thermal Insulation of roofing with Expanded polystyrene fixed withsuitable adhesive to the false ceiling as per the directions of the Engineerin-charge. With Type N-Normal 50 mm thick |
| 73 | Providing and Fixing of New winch Mechine along with shutters, rubber seal and alied accessories etc.. of required dimension, ISI marked one of standard quality, the winch machine for Hydraulic gates must have bearing capacity not less than 2 tons weight of Hydraulic gates having winch shaft of length 2.5m and 50mm dia with round threads in conjuction with gun metal nut of worm wheel arrangement . |
| 74 | Providing and Fixing of structural steel such as Iron Angle plates channels, Girders etc as Required |
| 75 | Providing and Fixing of Ply wood 5 ply, 9 mm thick Decorative ply wood one side and commercial veneer on other face (type 1) conforming IS 1328 BWR type |
| 76 | Aligning and fixing of Hydraulic Gates including Cleanising, Greasing of moving parts and Painting with one coat of Primer and two coats of Enamel paint, complete in all respects. |
| 77 | Providing and fixing plained eaves boarding 2nd class Kail wood 250x 32mm |
| 78 | Structural steel work in trusses frames steel work welded in built up sections including cutting hoisting and applying a priming coat of approved steel priming coat of approved steel primer all complete welded |
| 79 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 80 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 81 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.0 mm thick with zinc coating not less than 275 gram/m2 |
| 82 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand viz. Jaguar, Hindware, Kerovit etc. with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 83 | Providing and fixing 12 mm thick wall panelling over 10mm thick frame work of ply wood including all footing fastenings including P/A PUwood polyish over prepared surface after sand papering , applyng sealer etc complete job First class imported wood. |
| 84 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge by Engineer in charge.(a) 15 mm nominal dia. |
| 85 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 86 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 MM DIA |
| 87 | Providing and fixing P.V.C. P & S Trap for water closet or wash basin including P.V.C waste fittings complete: |
| 88 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe. |
| 89 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: 100 mm dia. Pipe, Sand cast iron S and S as per IS:3989 |
| 90 | Providing and fixing plain bend of required degree:100 mm dia pipe Sand cast iron S and S as per IS:3989 PVC or equivalent |
| 91 | Providing and fixing pvc pipes class C 100 mm dia pipe incl soil waste and vent pipes |
| 92 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4) |
| 93 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 94 | Providing and fixing bib cock of approved Quality 15mm nominal bore |
| 95 | P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings, angle valves and fixtures make: venus, jacquar , racold or equivalent. |
| 96 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes icluding all necessary fittings.Complete job. |
| 97 | Providing and fixing expansion hold fasteners on CC / R.C.C./brick masonry surface backing including drilling necessary holes and the cost of bolt etc. complete. 8.8.1 Fastener with threaded dia 10mm. |
| 98 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box nd earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 99 | Wiring for light/power plug points (15/16A heating points) with 2x4sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC Insulated copper conductor single core cable for earthing, etc. as required. (Havells/Polycab/ Anchor/ Finolex/KEI/RR or equivalent) including the cost of conduit. |
| 100 | Wiring for 5-10A socket out lets for computer (Inverter) with 2X1.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1No. 1x 1.5sq. mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required.including the cost of conduit. |
| 101 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including conduit as required. 25mm |
| 102 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 103 | Supply and fix LED Bulb 12W,230V Energy Efficient lamp Make : PHILLIPS, SURYA, SYSKA |
| 104 | Supply and Fixing ceiling fan High Breeze including Fan regulator 1200mm sweep with downrod,canopy and connecting up including provision of cable withmulti stranded copper conductor cable of size 0.75 Sqmm fromceiling rose to connector of ceiling fan and connecting up complete all as specified and as directed. Make : Usha / Havells / Crompton Greaves |
| 105 | MAIN BOARD: Design Fabrication,supplying installation testing and comissioning panel made out of 2mm thick MS sheet duly painted with 1 NO. incomer MCCB,10 NO.outgoing DP MCBS 3 sets of Almunium Bus bar and fixing 5 no. strip for housing MCBS and other allied acessories as required. |
| 106 | Distribution Boards : Supplying and Fixing ^ way single pole and Neutral ,sheet steel MCB Distribution board 220v on surface.Recess complete with tinned copper bus bar , Neutral bus bar including earthing etc as required. |
| 107 | Carriage of different materials from different sources to Dumping site by Mechanical Transport and Head load including Loading, unloading and stacking complete job . |
| 108 | Cement from mirbazar for an Avg lead of 5.0 Kms by MT and 50 Mts by HL |
| 109 | Sand from Ashmuji Bhan for an avg lead of 10km kms by MT and 50 Mts by HL |
| 110 | Aggregates(40mm) from Ashmuji Bhan for an avg lead of 10km kms by MT and 50 Mts by HL |
| 111 | Aggregates(40mm) from Ashmuji Bhan for an avg lead of 05 km kms by MT and 50 Mts by HL |
| 112 | Aggregates(20mm) from Ashmuji Bhan for an avg lead of 10km kms by MT and 50 Mts by HL |
| 113 | Aggregates(20mm) from Ashmuji Bhan for an avg lead of 05 km kms by MT and 50 Mts by HL |
| 114 | RCC Pipes of 450mm dia from lassipora for an abg lead of 15 kms by MT and 50 Mts by HL |
| 115 | RCC Pipes of 800 mm dia from lassipora for an abg lead of 40 kms by MT and 50 Mts by HL |
| 116 | Stone/Boulderrs from local Nallah for an avg lead of 5.0 kms by MT & 50 Mts by HL |
| 117 | Stone from Ashmuji Bhan for an avg lead of 10km kms by MT and 50 Mts by HL |
| 118 | Steel from Anantnag for an average lead of 5km by MT and 50m by HL. |
| 119 | Bricks from Palpora for an avg lead of 3 kms by MT and 50 mts by HL Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender