Tender For Upgradation Of Govt. Qtr. No. 1-A Special By Way Of Construction Of Wardrobes, Modular Kitchen, Septic Tank And Other Allied Works At Gandhi Nagar Jammu.
Tender Value
12 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
3 days left
EMD
24000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Govt. Qtr. No. 1-A Special By Way Of Construction Of Wardrobes, Modular Kitchen, Septic Tank And Other Allied Works At Gandhi Nagar Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 2 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed |
| 5 | Providing and laying in position Cement Concrete of specified grade excluding the cost of centring and shuttering, all work upto plinth level (1:4:8) 1 cement:4 coarse sand:8 graded stone aggreagate 40mm nominal size (crusher) |
| 6 | Providing and laying in position Cement Concrete of specified grade excluding the cost of centring and shuttering, all work ypto plinth level (1:3:6) 1 cement:3 coarse sand:6 graded stone aggreagate 20mm nominal size (crusher) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | steel reinforcement for R.C.C. work including straightening,cutting,bending ,placing in position and binding all complete upto plinth level |
| 9 | septic tank slab |
| 10 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in cement mortar 1:6(1 cement : 6 fine sand). Foundation and plinth and super structure upto floor V level. |
| 11 | extra for Brick masonry in superstructure above plinth level upto floor V level. |
| 12 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6.15.2 Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 13 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 14 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. |
| 15 | 15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 16 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 17 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 18 | 2mm thick |
| 19 | Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 20 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):sal wood |
| 22 | labour for shifting of debries /mulba from roof ,stairs momties etc and adjoining area of blocks to the dumping sites by engaging labours and other miscellenous works |
| 23 | Mason Ist class |
| 24 | carpenter helper |
| 25 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 26 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class Deodar- wood : 30mm thick |
| 27 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 12 mm thick Marine plywood conforming to IS: 710 |
| 28 | providing and fixing glazed shutter for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges finished of required size with necessary screws 30 mm second class deodar wood |
| 29 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood : 30mm thick |
| 30 | Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws: (shutter area to be measured |
| 31 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 250x10 mm |
| 32 | 200x10 mm |
| 33 | proving &fixing ISI marked almunium hanging floor door stoper ,ISI marked andized with neceesay screw etc complete single rubber stopper |
| 34 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 35 | providing &fixing of PVC Pipes for drainage severage,rain water flow pipe etc including labour &material costs complete job in all heights(LMR) 4' dia |
| 36 | 6\\" dia |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20mm nominal dia pipes |
| 38 | 25mm nominal dia pipes |
| 39 | Providing and fixing of CP Brass short nose bib cock of approved make / specification as directed by E.I.C (Cera, Jaquar, Hindware or equivalent ) |
| 40 | Providing and fixing of CP Brass long nose bib cock of approved make / specification as directed by E.I.C ( Jaquar make ,) |
| 41 | Providing and fixing of concealed body single lever high flow 3 way divertor including making all connections and making good the walls of approved make / specification as directed by E.I.C ( Jaquar, Hindware ) |
| 42 | Providing and fixing of CP Brass angle valve of approved make / specification as directed by E.I.C (Jaquar, make ) |
| 43 | providing and fixing of wall bend mixer/ Sink Mixer of jaquar make) |
| 44 | Providing and fixing of central hole basin mixer of jaquar, cera or essco |
| 45 | Providing and fixing of square/circular shower 10\\" along with Rod 45 cm of approved make / specification as directed by E.I.C (Jaquar, make ) |
| 46 | Providing and fixing of Towel Rail 600mm along with CP Brackets of jaquar make |
| 47 | Providing and fixing of Towel Ring Square of jaquar, make |
| 48 | Providing and fixing of Shower with arm of jaquar, make |
| 49 | Providing and fixing of Hand shower of jaquar, make |
| 50 | Providing and fixing of Health Faucet of jaquar make |
| 51 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 52 | Providing and fixing SS soap dish of approved make |
| 53 | Providing and fixing toilet paper holder C.P. brass |
| 54 | Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge |
| 55 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover,and cistern fittings, nuts, bolts and gasket etc complete. |
| 56 | Providing and fixing of Vanity Box 32\\" width with complete fitting and fixtures (INCLUDING CENTRAL HOLE MIXER/UNILEVER MIXER) of approved make Jaquar/Cera/Hindware as per direction of EIC |
| 57 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap |
| 58 | Providing and fixing white viterous china pedestal wash basin completely recessed at the back for the reception of pipes and fittings18.9 |
| 59 | Providing and fixing of cubical tuffen partition of 10mm thick tuffen glass including all fiting and fixture (4'x4'). |
| 60 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, doorweight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : |
| 61 | Providing and fixing brass curtain rods of wall thickness 1.25 mmwith two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm dia |
| 62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 63 | \\"Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works detail: \\" |
| 64 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing completeon 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse,dark shade using ordinary cement |
| 65 | providing &fixing of ply 19mm thick ply including cutting wasteage fevicol carriage etc LMR for kitchen cabinet |
| 66 | providing &fixing of ply 6mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make LMR |
| 67 | providing and fixing of 1mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (LMR |
| 68 | providing and fixing of 0.85mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (green,amulya,vigro) LMR |
| 69 | Providing and fixing of 4mm thick ACP sheet incl. all required complete job as directed by EIC |
| 70 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Arer of slab over 0.5 sqm |
| 71 | Granite of any colour or shade(Area of slab upto 0.5 sqm) |
| 72 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 73 | Hardware items. SS Handels 12'' |
| 74 | SS handels 8'' |
| 75 | SS Handels 6\\" |
| 76 | SS Hinges 3'' |
| 77 | SS Hinges 4'' |
| 78 | mortice latch and lock |
| 79 | Providing and fixing stainless steel 304 grade kitchen sink Handmade Sound proof including all fittings and brackets, of size 24\\"18\\"*9\\" of Approved Brand Hindware,or Equivalent |
| 80 | P/F OF TOUGHEN GLASS COMPLETE FITTING AND STEEL ACCESSORIES. 12 mm thick |
| 81 | 8mm thick |
| 82 | 5mm thick |
| 83 | Providing and fixing of modular kitchen accessorles of of approved specification incl carriage and fixing complete. SS Multi purpose basket 15''x20''x4'' |
| 84 | SS Multi purpose basket 15''20''x6'' |
| 85 | SS Multi purpose basket 15''x20''x8'' |
| 86 | SS Multi purpose basket 15''x20''x12'' |
| 87 | SS masnal pullout 15''x18''x18'' |
| 88 | SS Cuttlery basket 15''x20''x4'' |
| 89 | SS Thali basket 15''x20''x18'' |
| 90 | SS utensils rack of approved quality and size as per EIC |
| 91 | P/F OF EDGE TAPE OF APPROVED MAKE AS DIRECTED BY EIC |
| 92 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 93 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete 20.17.1 For pipes 100 to 250 mm diameter |
| 94 | Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line |
| 95 | providing and fixing SLIDING CHANNEL 20'' |
| 96 | providing and fixing auto hinges |
| 97 | providing and fixing hydraulic hinges |
| 98 | providing and fixing of chimney of approved brand(ELLICA, Faber,Hindware GLEN).having capacity of 1350 per cum |
| 99 | Engage Trolley for shifting of mulba from site to outer area of municipality Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender