Tender For Construction Of Govt. Senior Secondary School Gram Panchyat Bagain In Tehsil Theog, Distt Shimla (H.P)Sh: Steel Work, Acp Sheet Ceiling, M.S Railing, cement concrete 1:2:4, Painting, Distempring Etc. In Attic Floor & Porch Etc (Balance Wor
Tender Value
20.47 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
5 days left
EMD
40952
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Govt. Senior Secondary School Gram Panchyat Bagain In Tehsil Theog, Distt Shimla (H.P)Sh: Steel Work, Acp Sheet Ceiling, M.S Railing, cement concrete 1:2:4, Painting, Distempring Etc. In Attic Floor & Porch Etc (Balance Work)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick works manually/by mechanical means including stacking of serviceable material and disposal ofunserviceable material within 50meters lead. |
| 2 | Providing and laying in position C.C 1:4:8 (1cement: 4sand:8graded stone aggregate20mm nominal size). |
| 3 | Providing and laying in position C.C C 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size). |
| 4 | Providing and laying in position C.C C 1:2:4 (1cement:2sand:4graded stone aggregate 20mm nominal size). |
| 5 | Providing and laying in position C.C C 1:1.5:3 (1cement:1.5sand:3graded stone aggregate 20mm nominal size). |
| 6 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth cement mortar 1:6 (1cement:6sand). |
| 7 | Half brick masonry with common burnt clay F.P.S. bricks of class designation 7.5 in foundation and plinth cement mortar 1:4 (1cement : 4sand). |
| 8 | Providing and fixing 19mm thick commercial board for cupboard frame. |
| 9 | Providing and fixing 19mm thick commercial board for shutter. |
| 10 | Providing and fixing 1.00mm thick laminated sheet (sunmica). |
| 11 | Providing and fixing cover fillets (beading)19mm*6mm. |
| 12 | Providing and fixing brass handles 150mm. |
| 13 | Providing and fixing brass catcher. |
| 14 | Providing and fixing ISI marked flush door shutters construction with frame of 1st class hard wood & well matched 3 ply on both facesof shutters. |
| 15 | Providing and fixing aluminium sliding doorbolts 250*16mm. |
| 16 | Providing and fixing aluminium tower bolts200*10mm. |
| 17 | Providing and fixing aluminium handles 125mm. |
| 18 | Cement concrete flooring 1:2:4 (1 cement: 2 sand: 4 graded stone aggregates) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete |
| 19 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, ratings, brackets etc |
| 20 | Providing and fixing ACP sheet 3mm thick in ceiling complete |
| 21 | 15mm cement plaster on the rough side in cement mortar 1:6 (1cement: 6sand) |
| 22 | 6mm cement plaster 1:3 (1 cement 3sand). |
| 23 | Repair of plaster of thickness 12mm to 20mm in 23.98 patches of area 25sq. meters and under, Including cutting the patch in proper shape in cement mortar 1:3/1cement 3sand). |
| 24 | 15mm cement plaster on fair side of cement mortar 1:6 (1 cement 6sand). |
| 25 | Wall painting with Acrylic emulsion paint of approved quality two or more coats. |
| 26 | Finishing wall with Acrylic smooth exterior paint of required shade Two or more coats |
| 27 | Painting with synthetic enamel paint on wood and wood based surfaces. |
| 28 | Painting with synthetic enamel paint on steel and steel based surfaces with two or more coats |
| 29 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture over the plastered wall surface even and smooth. |
| 30 | Providing and fixing ply wood lining 12mm shuttering ply. |
| 31 | Providing and fusing aluminium work for door, window, ventilators, partitions, ceiling etc. Aluminium section shall be smooth, rust free. straight, mitred and jointed mechanically wherever required |
| 32 | P/F panelled glazed shutter for window including M.S. press butt hinges with necessary screws including glass pans all complete |
| 33 | Providing and fixing scaffolding system on the exterior side up to seven story height made with 40mm dia M.S. tube 1.5m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challis, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc |
| 34 | Providing and fixing Thermopolis insulation of approved density and thickness to ceiling/walls, including applying cold setting adhesive, binding and finishing complete. |
| 35 | Providing and fixing percolated galvanised iron profile sheets @Flashings/Aprons up to 600mm. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender