Tender For Repair To Joinery, Flooring, Plumbing, Sanitary Fittings, Day To Day Complaints, Other Repair Work To Md & Otm Accn And Welcome Maintenance To Certain Buildings At Site P At Af Stn Thane Under Ge(Af) Thane
Tender Value
43 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
17 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Flooring, Plumbing, Sanitary Fittings, Day To Day Complaints, Other Repair Work To Md & Otm Accn And Welcome Maintenance To Certain Buildings At Site P At Af Stn Thane Under Ge(Af) Thane
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick, concrete surface or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer-in-Charge. |
| 2 | M/L for rendering 15mm thick in cement mortar 1:4 a with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 3 | M/L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 4 | M/L for rendering 5mm thick in cement mortar 1:3 on Ceiling brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for new plastered surface applying two coats of weather shield ultra exterior premium emulsion paint coat of coats of acrylic weather proof paint over one primer complete all as specified and directed by Engineer-in-Charge. |
| 6 | M & L for Preparation of new plastered surface of wall and applying wo coat of oil bounds distemper over one coat of putty(1mm thick) complete all as specified and directed by Engineer-in-Charge. |
| 7 | M & L for Preparation of new plastered surface of Ceiling and applying two coats of OBD on Ceiling complete all as specified and directed by Engineer-in-Charge. |
| 8 | M & L for Preparation of old deciorated surface of wall by washing rubbing down and applying two coat of coats of acrylic weather proof paint over one coat primer complete all as specified and directed by Engineer-in-Charge. |
| 9 | M & L for Preparation of old decorated surface of wall by washing rubbing down and stopping of old surface and applying two coat of oil bounds distemper over one coat of putty(1mm thick) complete all as specified and directed by Engineer-in-Charge. |
| 10 | M & L for Preparation of old decorated surface of Ceiling and applying two coats of OBD on Ceiling complete all as specified and directed by Engineer-in-Charge. |
| 11 | M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds, efflorences and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-Charge. |
| 12 | M & L for preparaing plastered or unplastered surfaces of old walls including brooming down or steel wire brushing, scraping down smoke or soot moulds ,efflorences and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coat of Oil bound distemper on walls complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for preparation of surface plastered or unplastered old surface of wall and applying one coat of Oil bound distemper on walls complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of Oil bound distemper on ceilingcomplete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for 1mm thick one coat of wall care putty on wall complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for 1mm thick one coat of wall care putty on ceiling complete, complete all as specified and directed by Engineer-in-Charge. |
| 18 | M & L for preparation of old surfaces of wood and wood based of any description, not otherwise described, over 10 cm width or girth including for all necessary preparatory work required and applying one coat of synthetic enamal paint, complete all as specified and directed by Engineer-in-Charge. |
| 19 | M & L for preparation of old surfaces of steel and iron of any description, not otherwise described, over 10 cm width or girth including for all necessary preparatory work required and applying one coat of synthetic enamal paint on steel, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Dismantling of floor hearth or wall tilling including cement mortor bedding and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 21 | M & L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes etc in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 22 | M & L for rendering to brick/ concrete surface 10mm thick in cement mortar 1:4 surfaces finished fair and even and scoured for fixing tiles/ stone slabs etc ccomplete all as specified and directed by Engineer-in-Charge. |
| 23 | M & L Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in any shade dark/light complete all as specified and directed by Engineer-in-Charge. |
| 24 | M & L Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in any shade dark/light complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed by Engineer-in-Charge. |
| 28 | M & l for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coulred tiles complete all as specified and directed by Engineer-in-Charge. |
| 29 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed. |
| 30 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge. |
| 31 | Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete is reinforced (reinforcement cut as required to facilitate demolition)aprons etc complete all as specified and directed by Engineer-in-Charge. |
| 32 | M & L Reinforced cement concrete ( Nominal mix) in type B1 1:2:4( 20 mm graded aggregate) Chajjas and the like complete all as specified and directed by Engineer-in-Charge. |
| 33 | M & L for form work to sides and soffits of floor or beams etc complete all as specified and directed by Engineer-in-Charge. |
| 34 | M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column hooking end complete all as specified and directed by Engineer-in-Charge. |
| 35 | All as above Item No. 25 but 6mm to 8mm dia complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for Resecuring, easing and adjusting without taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for Resecuring, easing and adjusting without taking down Shutters of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engineer-in-Charge. |
| 38 | Taking down chowkat with shutters (without taking off shutters from the frames) of any description exc 1.5 sqm and not exc 4.0 sqm in each panel complete all as specified and directed by Engineer-in-Charge. |
| 39 | Taking down chowkat with shutters (without taking off shutters from the frames) of any description n exc 1.5 sqm in each panel complete all as specified and directed by Engineer-in-Charge. |
| 40 | Taking down shutters of any description n exc 1 sqm in each panel complete all as specified and directed by Engineer-in-Charge. |
| 41 | Taking down shutters of any description exc 1 sqm n exc 2 sqm in each panel complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F second class hard wood plain, solid straight factory made chowkats or frames wrought framed, rebated on silid rounded or chamfered put together with glue pinned incl tarring back of chowkat/frame complete all as specified and directed by Engineer-in-Charge. |
| 43 | M&L for 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. |
| 44 | M&L for 30mm thick second class hardwood Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed by Engineer-in-Charge. |
| 45 | S & F 25mm thick second class hard wood plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed by Engineer-in-Charge. |
| 46 | S/F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strick inside, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube, in opening as per specification and drawing incl making good the disturbed surface to match the existing for toilet,complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beads in square n exc 0.5sqm in each panel (beads will be measured and paid under separate item), complete all as specified and directed by Engineer-in-Charge. |
| 49 | All as above item No 39 but frosted glass on one side including fixing complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engineer-in-Charge. |
| 51 | S & F Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc. complete all as specified and directed by Engineer-in-Charge. |
| 52 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F (exruted section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 54 | M/L for PCC 1:2:4 type B0 using 12.50 mm graded aggreagate as in bed blocks and hold fasts complete all as specified and directed by Engineer-in-Charge. |
| 55 | M/L for mild steel for hold fast , wall ties similar small articles conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed by Engineer-in-Charge. |
| 56 | Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engineer-in-Charge. |
| 57 | S & F of 100mm Butt hinges, med weight, alluminium, and fixed complete all as specified and directed by Engineer-in-Charge. |
| 58 | S & F of 75mm Butt hinges, med weight, cold rolled mild steel, and fixed complete all as specified and directed, complete all as specified and directed by Engineer-in-Charge. |
| 59 | S & F 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge. |
| 60 | S & F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 61 | S & F 150mm Aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L for applying one coat of synthetic enamel paint to old Steel surface incl preparation of surface of any description over 10 cm width or girth ,complete all as specified and directed by Engineer-in-Charge. |
| 63 | M&L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 64 | M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. in repairs , complete all as specified and directed by Engineer-in-Charge. |
| 65 | M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 66 | Taking down steel tubing & connections incl cleaning for refixing or removal to store for 15mm bore of pipe, complete all as specified and directed by Engineer-in-Charge. |
| 67 | Taking down steel tubing & connections incl cleaning for refixing or removal to store for 20mm bore of pipe, complete all as specified and directed by Engineer-in-Charge. |
| 68 | M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 69 | M&L for 20mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 70 | Refixing old GI steel tubing with and including necessary fitting& connections in new or old position (walls, ceiling, floors etc) 15 mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 71 | Refixing old GI steel tubing with and including necessary fitting& connections in new or old position (walls, ceiling, floors etc) 20 mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repair 20mm Ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F in repair vitreous china wash hand basin white flat back size 550 X 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engineer-in-Charge. |
| 75 | S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel hinge chromium plated complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F in repairs brass cromium plated shower rose with swivel joint 125 mm size, complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&F in repairs bib tap 15mm bore chromium plated cast copper alloy with crutch or butter fly handle but fancy type screwed down screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 78 | S & F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long, complete all as specified and directed by Engineer-in-Charge. |
| 79 | S & F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe15mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F in repairs quarter turn stop valves CP Brass fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 81 | S&F 15mm dia pillar tap chromium plated cast copper alloy with capstan head, fancy type screwed down high pressure with or with out letters Hot or cold with long screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge. |
| 82 | M&L in repairs orrisa pattern viterious china ware water closet white glazed of pan size 580x440mm with integral foot rest fixed flushed pipe including all joints and making good to the floor,complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F in repair low level flushing cistern plastic valve less syphonic action type white with inlet ball valve float and ball handle & capacity 10 ltr ISI marked including 32 mm PVC flush pipe, complete all as specified and directed by Engineer-in-Charge. |
| 84 | Supply and fix in repairs Stainless steel kitchen sink with drainage board, 1mm thick with plugs, washers and waste pipe, including bedding in Cement Mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915mmx460mm bowl size 410mmx355mmx165mm , complete all as specified and directed by Engineer-in-Charge. |
| 85 | Dismantling cast iron drain pipes of any description, complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and directed by Engineer-in-Charge. |
| 87 | Supply and fix 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and directed by Engineer-in-Charge. |
| 88 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip, complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&F (SWR) pipe 75 mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip , complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply and fix PVC bend/shoe 110mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply and fix PVC bend/shoe 75mm dia complete all as specified and directed by Engineer-in-Charge. |
| 93 | Supply and fix 110 mm PVC (SWR) branch pipes single Y equal or unequal with complete accesarry , complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply and fix 75 mm PVC (SWR) branch pipes single Y equal or unequal with complete accesarry, complete all as specified and directed by Engineer-in-Charge. |
| 95 | S&F 110mm dia (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F 75mm bore PVC (SWR) vent cowl , complete all as specified and directed by Engineer-in-Charge. |
| 97 | S & F PVC (SWR) 75 mm branch piece, double (double Y) equal or unequal ,complete all as specified and directed by Engineer-in-Charge. |
| 98 | S&F PVC (SWR) 110 mm branch piece, double (double Y) equal or unequal, complete all as specified and directed by Engineer-in-Charge. |
| 99 | Supply and fix PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 100 | supply and fix as in repair cast iron Nahani trap of 100mm dia including jointing to waste pipe fixed in cement concrete type 1:2:4 type B1 complete all as specified and directed by Engineer-in-Charge. |
| 101 | S&F in repairs looking mirror of size 450mm X 600mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial type plywood fixed to wdn plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs ccomplete all as specified and directed by Engineer-in-Charge. |
| 103 | S&F in repair PVC cover for tanks of capacity 500 to 1000 ltrs including taking out old broken covers with GI nuts and bolts 3/16\\" dia and 1\\" long bolts with washers (8 Nos with each cover and 2 Nos hing bolts and nuts 8 mm dia 50 mm long complete all as specified and directed by Engineer-in-Charge. |
| 104 | S&F in repair 32mm dia Waste coupling of PTMT (half or full threaded). (Minimum weight 32mm 45gms/40mm-60 gms complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F in repair 40 mm dia Waste coupling of PTMT (half or full threaded). (Minimum weight 32mm 45gms/40mm-60 gm complete all as specified and directed by Engineer-in-Charge. |
| 106 | M & L For cleaning of OH PVC Service Tank internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with roatary sets with approved detergents and sucking all dirty water by avaccum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, all as directed by EIC.(a) Overhead Pvc water tank upto 500 Litrs of capacity Note- cleaning of OH PVC service tanks are safely to be handled Damage and bracking of tanks are on Contractors OWN risk. complete all as specified and directed by Engineer-in-Charge. |
| 107 | All as above but exc 500 ltr and n.exc 1000 ltrs capacity complete all as specified and directed by Engineer-in-Charge. |
| 108 | All as above 1 but exc 1000 ltr and n.exc 2000 ltrs capacity complete all as specified and directed by Engineer-in-Charge. |
| 109 | Dismantling water tank capacity exc 250 and n exc 500 ltr and removing to store complete all as specified and directed by Engineer-in-Charge. |
| 110 | Dismantling water tank capacity exc 500 and n exc 1000 ltr and removing to store complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F 500 Ltr Rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 112 | S&F1000 Ltr Rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 113 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed by Engineer-in-Charge. |
| 114 | Supply and fix 40mm GI pipe, medium grade in isolated length of 400mm long inserting into wall surfaces with 100mm projecting from the external face of wall as in water draining spout complete all as specified and directed by Engineer-in-Charge. |
| 115 | Material and labour for rendering in CM (1:3),10mm thick on wall of sunken floor suraces finish the surface even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed by Engineer-in-Charge. (Note : WPC will be measured and paid in supply only rate) |
| 116 | Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 117 | Materials & labour for water proofing treatment to sunkun floors with the following courses of treatment :- (a) Apply first layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.126 kg/sqm complete all as specified and directed by Engineer-in-Charge.(b) Apply second layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.253 kg/sqm including cleaning the surfaces and complete all as specified and directed by Engineer-in-Charge. (c) Apply 200 micron thick polythene film pasted with the help of adhesives shall be provided over treatment complete all as specified and directed by Engineer-in-Charge. Note :- The slope of slab shall be 1:20 towards the corner of outer walls and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 10 cm which should be measured and paid separately, complete all as specified and directed by Engineer-in-Charge. |
| 118 | Material and labour for cement concrete 1:5:10 type E2 (using 40mm stone aggregate) as in filling in sunkun floor,complete all as specified and directed by Engineer-in-Charge. |
| 119 | Supply and fix salt glazed stoneware traps \\"P\\" type with 100 mm bore of pipe fixed in repairs setting the trap and pan in 150mm thick all around cement concrete including taking down old trap ,complete all as specified and directed by Engineer-in-Charge. |
| 120 | M&L for plain cement concrete 75mm thick type C-1 1:3:6 (using 20mm graded stone aggregae as in path,plinth protection or hardstanding complete all as specified and directed by Engineer-in-Charge. |
| 121 | Taking down the steel rolling shutter gear operated rolling shutter n-exc 30 sqm area including adjustment of gear worms assenbely complete each including hood cover and cleaning the sides of shutter suspension and guide shannelks and greasing all the moving parts of rolling shutter shaft and replacement of bolts and nuts as required for smooth functioninig of shutters and refixing the same including hood cover complete all as specified and directed by Engineer-in-Charge. |
| 122 | S & F in repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull ormanual type complete all as specified and directed by Engineer-in-Charge. |
| 123 | S&F in repair for Steel rolling shutters, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type thickness of latch 1. mm complete all as specified and directed by Engineer-in-Charge. |
| 124 | S & F in repairs Safety lever locks mild steel with 4 levers for rollingshutters complete all as specified and directed by Engineer-in-Charge. |
| 125 | S & F in repairs Ball bearing for rolling shutters, complete all as specified and directed by Engineer-in-Charge. |
| 126 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed by Engineer-in-Charge. |
| 127 | M&L for Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed by Engineer-in-Charge. |
| 128 | M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed by Engineer-in-Charge. |
| 129 | Dismantling timber scatling in framed work in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engineer-in-Charge. |
| 130 | M&L scantling of size exc 13 but n exc 25 sq.cm Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engineer-in-Charge. |
| 131 | M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge. |
| 132 | Dismantling wrought iron or mild steel work of any description not otherwise provided fo complete all as specified and directed by Engineer-in-Charge. |
| 133 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240complete all as specified and directed by Engineer-in-Charge. |
| 134 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 135 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 136 | S&F pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 137 | Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 138 | S&F Fiber sheet 3mm thick covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 139 | S&F plates or chequered) channels, square cut or notched (ordinaryand counter sunk)forming holes, without any attachment with Fe-290 (GdeE-165)complete all as specified and directed by Engineer-in-Charge. |
| 140 | M&L for Cement concrete for post (bases) of trusses over roof with type C2, 1:3:6 (40mm graded stone aggregate) complete all as specified and directed by Engineer-in-Charge. |
| 141 | Formwork to sides of columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge. |
| 142 | S&F in repair Drapery curtain rod/ Harrison rails of anodised aluminium alloy complete with MS brackets golden colour rings and sode caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw, complete all as specified and directed by Engineer-in-Charge. |
| 143 | S&F in repairs stainless steel wire mesh of 0.36mm dia of wire and average width of aperture 1.40mm & fixed with tinted tacks of galvanised over staples for steel window and ventilator or aluminum window as, complete all as specified and directed by Engineer-in-Charge. |
| 144 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including, seat and cover, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed by Engineer-in-Charge. |
| 145 | S&F in repair stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 146 | S&F in repair brass CP Tubular towel rail, aluminium anodised 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engineer-in-Charge. |
| 147 | S&F in repair 15 mm Pillar taps, cast copper alloy, with capstan heads,fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 148 | Supply and fix in repair stop cock of 15mm bore fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed by Engineer-in-Charge. |
| 149 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer-in-Charge. |
| 150 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed by Engineer-in-Charge. |
| 151 | Supply and fix aluminum anodized sliding door bolt 250mm long with Hasp and stapple, complete all as specified and directed by Engineer-in-Charge. |
| 152 | Supply and fix sheet glass tinted ordinary quality 3.00mm thick and glazing with oil putty in squares exc 0.5 sqm in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 153 | All as per item above item but frosted glass, complete all as specified and directed by Engineer-in-Charge. |
| 154 | M&L for preparation of new plaster surfaces and apply two coat of white wash on ceilings, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender