Tender For Stock Storage Under Jal Shakti Division Jubbal In Tehsil Jubbal Distt. Shimla (H.P) (Sh: Repair And Maintenance Work In Divisional Office Jubbal). (Estimated Cost:- 4,94,928/-, Earnest Money Rs:- 9,900/- Time:- 3 Months.)
Tender Value
4.94 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
5 days left
EMD
9900
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stock Storage Under Jal Shakti Division Jubbal In Tehsil Jubbal Distt. Shimla (H.P) (Sh: Repair And Maintenance Work In Divisional Office Jubbal). (Estimated Cost:- 4,94,928/-, Earnest Money Rs:- 9,900/- Time:- 3 Months.)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying damp proof membrane (DPM) of approved make using polyethylene/HDPE sheet of minimum 250 micron thickness over prepared surface, including surface cleaning, overlap joints, sealing with adhesive tape, complete in all respects as per direction of Engineer-in-Charge |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position of 2nd class deodar wood. with in all leads and lifts as per the direction of the Engineer in Charge. |
| 3 | Providing and fixing of water proof kit ply of standard quality ISI marked and approved shade and color in wall lining including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured and paid separately) - mm thick. |
| 4 | Providing and fixing factory-made decorative louver panels of approved make, size (10 ft x 10 inch), in desired shade and finish, conforming to manufacturer's specifications, fixed on wood frame using approved clips, srews, and adhesive/sealant, including cutting, joint alignment, finishing and making good the surface, complete in all respects as per direction of the Engineer-in-Charge.(Non-Schedule Item - Market rate to be adopted) |
| 5 | Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Plain Glass 8 mm thick |
| 6 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 7 | Finishing wall with water proofing cement paint on undecoracted wall (Two-coat) Asian Pains Royale Shine Paint for ceilling |
| 8 | Providing and fixing 19mm thick factory-pressed BWP (Marine) Grade plywood (IS:710) for fabrication of tables, counters, cabinets, etc., including cutting, fixing with screws/adhesive, and finishing complete as per manufacturer's specifications and direction of Engineer-in-Charge. |
| 9 | Providing and fixing of standard quality teak wood ply lining with butt jointing and nails )Frame work and cover fillets to be measured and paid separately with in all leads and lifts. |
| 10 | Providing and fixing 20mm thick teak wood beading/moulding on edges of plywood shelves/partitions, properly finished complete. |
| 11 | Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler with in all leads and lifts and entire satisfaction of Engineer in Charge. |
| 12 | Extra over (polishing) item No. 4 for every subsequent coat of polish with in all leads and lifts. |
| 13 | Providing and fixing High Pressure Laminate (HPL) Sheet / Sunmica of approved colour, make and minimum thickness 0.8 mm, bonded with synthetic resin adhesive conforming to IS:851-1978, over substrate, including cutting, finishing and polishing edges, complete as per manufacturer's specifications and direction • of the Engineer-in-Charge. (Non-Schedule Item - Market rate to be adopted) |
| 14 | Providing and fixing Heavy-type soft-closing telescopic drawer channels (ball-bearing) of approved make, 500 mm long, including screws, complete as per direction. |
| 15 | Providing and fixing Stainless Steel Pull Handle (SS 304 grade), 6 inch (150 mm) length, of approved make and finish (Satin/Brushed), including supply of matching stainless steel screws/fixtures, positioning, drilling (if required), fixing, alignment, and cleaning, complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. (Non-Schedule Item - Market rate to be adopted) |
| 16 | Providing and fixing Soft-closing hydraulic hinges stainless steel of approved make to cupboard shutters, with screws, including recessing and finishing complete. |
| 17 | Providing and fixing magnetic door catcher/catch (single magnet type) for cabinet shutters including matching metal plate, screws and all necessary fittings complete in all respects. |
| 18 | Providing and fixing High Pressure Laminate (HPL) Sheet / Sunmica of approved colour, make and minimum thickness 0.8 mm, bonded with synthetic resin adhesive conforming to IS:851-1978, over substrate, including cutting, finishing and polishing edges, complete as per manufacturer's specifications and direction of the Engineer-in-Charge. (Non-Schedule Item - Market rate to be adopted). |
| 19 | Providing and fixing Stainless Steel Pull Handle (SS 304 grade, 6 inch (150 mm) length, of approved make and finish (Satin/Brushed), including supply of matching stainless steel screws/fixtures, positioning, drilling (if required), fixing, alignment, and cleaning, complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. (Non-Schedule Item - Market rate to be adopted) |
| 20 | Providing and fixing Stainless Steel Pull Handle (SS 304 grade), 4 inch (100 mm) length, of approved make and finish (Satin/Brushed), including supply of matching stainless steel screws/fixtures, positioning, drilling (if required), fixing, alignment, and cleaning, complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. (Non-Schedule Item - Market rate to be adopted) |
| 21 | Providing and fixing Drawer Lock of approved make and design, brass/steel plated, complete with locking mechanism, keys and screws, fixed to drawer shutters as per manufacturer's specifications. (Non-ScheduleItem Market rate to be adopted) |
| 22 | Providing and fixing PVC Edge Banding Tape (Lipping) 16-19 mm wide, 2 mm thick, hot-pressed over edges using edge-banding machine, complete as per direction. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender