Tender For Improvement And Extn Of Lwss Dehra Town In Tehsil Dehra Distt. Kangra (Hp(Sh:- Drilling By Odex 1No/ Percussion / Calyx /Rc Portable Rigs)
Tender Value
3.71 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
7 days left
EMD
7420
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement And Extn Of Lwss Dehra Town In Tehsil Dehra Distt. Kangra (Hp(Sh:- Drilling By Odex 1No/ Percussion / Calyx /Rc Portable Rigs)
BOQ
| Sl. No. | Item Description |
| 1 | Providing & installation of India Mark-III( 65mm) and India Mark-II extra deep (32mm) deep well hand pumps as per IS 13056-1991 alongwith its up to date amendments and IS 9301 respectively comprising of following items:- Transportation of suitable truck/Tractor mounted rig where road available or with portable rig where road not available with DTH/ODEX/Percussion/Calyx/Rotory method alongwith necessary accessories etc. to the site of work and errection including levelling of site etc. complete in all respect as per direction of the Engineer-in-Charge . |
| 2 | Drilling bores of 152mm dia as per IS-2800-1979 ( IS: 2800 P-I) off road and on road ( both) 1991 re-affirmed 2001 using DTH with ODEX attachment rig required drilling in collapsible strata, comprising conglomerate, boulders, pebbles, gravels, silt, clay etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125mm nominal bore 5 mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia Advani/Oerlixon electrodes with one plain end and the other end chamfered in 50 degrees including removing paint on the area to be welded, inclusive of the cost of bio-degradable and not-toxic foam flush etc omplete in all respects as per direction of the Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. |
| 3 | Supplying and lowering of IS marked 125 mm nominal bore, 5 mm thick fincut MSERW casing pipes as per IS 4270-2001 and requirement of ODEX attachment from approved manufacturers complete in all respects as per the direction of the Engineer-in-Charge. |
| 4 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachement complete in all respect as per the direction of the Engineer-in-Charge. |
| 5 | Collection and preservation of soil samples in ploythene bags complete in all respect as per direction of Engineer-in-Charge. |
| 6 | Development of bore well and yield testing with Air compressor through 90 degree V-notch and disinfection etc.complete in all respects as per IS-2800-1979 and as per direction of Engineer-in-Charge |
| 7 | Supply and lowering of IS-marked Riser pipes medium class screwed and socketed & welded conforming to IS-1239-1990 (Part-I) with uptodate ammendments including cost of all cuttings,threadings & welding wherever required in a rendom length of 3 Mtrs.inclusive of transportation charges to the site complete in all respects and as per direction of Engineer-in-Charge. The seam less sockets shall be provided as per IS 13056-1991. |
| 8 | 32 mm dia |
| 9 | Supplying and errection of IS marked India Mark-II extra deep well hand pumps (32mm) confirming to IS: 9301 consisting of pump head assembly,cylinder assembly and seven connecting rods complete in all respect for installation down to depth from 40 to 80 mtr as per direction of the Engineer-in-Charge. |
| 10 | Providing and fixing of extra connecting rods upto 3 mtrs. length in hand pump as per site conditions complete in all respect as per dierction of Engineer -in-Charge |
| 11 | Construciton of plate form as per approved design / drawing of department 1.80 Mtr dia with pucca drain for waste water having size of drain 1000x300x100mm with cement concrete 1:2:4 ( 1 cement : 2 sand: 4 graded stone agg.) (100mm thick in bed and 100mm thick in side of drain /plate form and providing under layer for plateform with stone solling 150mm thick and providing RCC smooth finishing in CM 1:3 ( One cement : Three sand) including the cost of excavation and form work curing complete within all leads and lifts and to the entire satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender