Tender For Estimate For Construction Of Watchman Hut At Batseri, W L Range Sangla Under W L Division Sarahan During 2026-27
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Aug 2026
2 days left
EMD
10200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Construction Of Watchman Hut At Batseri, W L Range Sangla Under W L Division Sarahan During 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceed 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottom, lift upto 1.5 m, including getting out the excavated soil and disposal surplus excavated soil as directed, within a lead of 50 m. |
| 2 | 2.8.1 All kind of soil |
| 3 | Providing & laying in position cement concrete of specified grade excluding the cost of centering ans shuttering - All work up to plinth level: |
| 4 | 4.1.10 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) |
| 5 | Random Rubblr masonry with hard stone in foundation and plinth levelling up with cement concrete 1:6:12 (1cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with: |
| 6 | 7.1.1 Cement mortar 1:6 ( 1 ceme t : 6 sand |
| 7 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 8 | Random Rubblr masonry with hard stone in Super structureabove plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like: |
| 9 | 7.2.1 Cement mortar 1:6 ( 1 ceme t : 6 sand |
| 10 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. |
| 11 | Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minium depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15degree landings, balcinies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level, excluding cost of centering, shutering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in postion and binding all complete above plinth level. |
| 14 | 5.22.A1 Mild steel and medium Tensil steel bars |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 16 | 5.9.5 Lintels, Beams, Plinth beams, girders, bressumers and cantilevers |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately): |
| 18 | 9.1.2 Sal wood |
| 19 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: |
| 20 | 9.7.1 Second class teak wood |
| 21 | 9.7.5.4 Pre-laminated particle board with decorative lamination on both sides, Grade-1, typeII.IS:12823 marked |
| 22 | 9.7.7.1 4mm thick glass pane (weight not less than 10 kg per sqm) |
| 23 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embending in cement concrete block 1;3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 24 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete: |
| 25 | 9.55.1 125x65x2.12 mm Doors |
| 26 | 9.55.3 75x47x1.70 mm Windows |
| 27 | Providing & fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: |
| 28 | 9.96.1 300x16mm |
| 29 | Providing & fixing aluminum tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc. complete: |
| 30 | 9.97.1 300x10mm |
| 31 | 9.97.4 150x10mm |
| 32 | Providing & fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc. complete: |
| 33 | 9.100.1 125mm |
| 34 | 9.100.2 100mm |
| 35 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved bt Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minium to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. the sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlin, rafters and trusses and including cutting to size and shape wherever required. |
| 36 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zink coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy ptimer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: |
| 37 | 12.51.1 Ridges plain (500-600mm) |
| 38 | 12.51.6 Gutter (600 mm over all girth) |
| 39 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 40 | 10.16.1 Hot finished welded type tubes |
| 41 | Providing & laying Ceramic glazed floor tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, rises of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 42 | Providing and fixing /F of M.S. grills of required pattern of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 43 | Providing and fixing flat pressed 3 layer medium density partical board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : |
| 44 | 12.25.1 12mm thick |
| 45 | 15 mm cement plaster on the rough side of stone wall of mix: |
| 46 | 13.2.1 1:4 (1 cement : 4 fine sand) |
| 47 | 15 mm cement plaster on the rough side of stone wall of mix: |
| 48 | 13.2.2 1:6 (1 cement : 6 fine sand) |
| 49 | Applying priming coat: |
| 50 | 13.50.1 With readt mixed pink or prey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 51 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: |
| 52 | 13.48.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/ 10sqm over an under coat of primer applied @ 0.75 ltr/ 10 sqm of approved brand and manufacture. |
| 53 | Distempering with oil bound washable distemper of approved brand and manufactur to give an even shade: |
| 54 | 13.41.1 Net work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 55 | Finishing walls with water proofing cement paint of required shade: |
| 56 | 13.44.1 New work (Two or more coats applied @ 3.84 kg/ 10sqm) |
| 57 | 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand,including necessary excavation, levelling & dressing & finishing the top smooth. |
| 58 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 59 | 4.1.10 (1 cement : 5 coarse sand); 10 graded stone aggregate 40 mm nominal size) |
| 60 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 61 | 4.3.2 Retaining walls, return walls, walls (any thickness) including attached pilasters, butteresses, plinth and string courses fillets, kerbs and steps etc. |
| 62 | Providing, supplying, laying, fixing, testing and commissioning complete internal electrical installation for the building, including all wiring, conduits, switchboards, switches, sockets, distribution board (DB), MCBs, earthing, light and fan points, fixtures, fittings, accessories, and all other allied works, complete in all respects Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender