Tender For General-Pmmsy- Modernization Of Ponnani Fh-Electrification Of Covered Loading Area, New Auction Hall , Providing Power Connection To Mechanical Conveyor And Automation System , Pressure Washer And Etp.-General Electrical Work
Tender Value
56.74 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
7 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Pmmsy- Modernization Of Ponnani Fh-Electrification Of Covered Loading Area, New Auction Hall , Providing Power Connection To Mechanical Conveyor And Automation System , Pressure Washer And Etp.-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Work |
| 2 | 1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group B |
| 3 | 1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A |
| 4 | 1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C |
| 5 | 1.14.10:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 6 | 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm |
| 7 | 1.17.33:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 6 sq. mm |
| 8 | 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 9 | 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 10 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 11 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 12 | 1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm |
| 13 | 1.21.5:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm |
| 14 | 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 15 | 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 16 | 1.26:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 17 | 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 18 | 90.10.1.3:Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )3 module moulded plastic box on surface |
| 19 | 1.28.2:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module |
| 20 | 1.28.4:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module |
| 21 | 90.10.1.5:Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )6 module moulded plastic box on surface |
| 22 | 1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 23 | 1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 24 | 1.41:Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 25 | 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 26 | 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Double pole |
| 27 | 2.10.4:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Triple pole |
| 28 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 29 | 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 30 | 2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 31 | 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.40 amps |
| 32 | 5.3:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. |
| 33 | 5.13:Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. |
| 34 | 5.14:Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 35 | 5.17:Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. |
| 36 | 9.1.36:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 50 sq. mm (35mm) |
| 37 | 9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 38 | 9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 39 | 9.1.34:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm) |
| 40 | 9.1.35:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm) |
| 41 | 9.3.32:Supplying and making straight through joint with cast resin compound including ferrules andother jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 50 sq. mm |
| 42 | 9.3.29:Supplying and making straight through joint with cast resin compound including ferrules andother jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm |
| 43 | 9.3.30:Supplying and making straight through joint with cast resin compound including ferrules andother jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm |
| 44 | 9.3.31:Supplying and making straight through joint with cast resin compound including ferrules andother jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm |
| 45 | 14.2:Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. |
| 46 | 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). |
| 47 | 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels |
| 48 | 90.3.18.3:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.40 mm dia with clamps made from 20 x 3 mm MS flat |
| 49 | 90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required. |
| 50 | 90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm |
| 51 | 90.11.1.12:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+24) - three phase double cover (IP 42/43) |
| 52 | 90.12.41.32:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp |
| 53 | 90.12.5.41:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm |
| 54 | 90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm |
| 55 | 90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp |
| 56 | 90.12.7.41:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp |
| 57 | 90.12.5.43:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 35 sq mm |
| 58 | 90.12.7.43:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 35 sq mm with factory made clamp |
| 59 | 90.12.5.44:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 50 sq mm |
| 60 | 90.12.7.44:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 50 sq mm |
| 61 | 90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size |
| 62 | 90.12.9.4:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench77/63 mm or nearest size |
| 63 | 90.12.24.1:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.2.5 sq mm |
| 64 | 90.12.9.3:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench63/50 mm or nearest size |
| 65 | 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 66 | 90.15.4.6:Supply Conveyance, installation, testing and commissioning of 70W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 67 | 90.15.4.7:Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 68 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 69 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 70 | 90.14.10.1:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL |
| 71 | 90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. |
| 72 | 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply |
| 73 | 90.15.4.11:Supply Conveyance, installation, testing and commissioning of 200W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 74 | 90.14.10.4:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL |
| 75 | OD1514/2025-2026:Supply and installation of wall mounting cubicle type dust and vermin proof size 4 , 600x300x214 mm or nearest suitable size, hinged type thermoplastic box with 40A,16 kA,TP MCCB with 32A 2 way porcelain neutral link and rotary handle , one set phase indication lamp,2A C-curve MCB - 3 Nos ,Panel surface mounting 96sq.mm backlit LED Multifunction meter three line display to read V,A,KVA,,PF and frequency of make Schneider or equivalent suitable for 415V ,50Hz - 1 No,30/5 tape wound class 1 CT -3 Nos. Sufficient holes for fixing phase indication lamp, multifunction meter and rotary handle in the thermoplastic box are to be provided. Necessary interconnection with suitably rated copper conductor with copper socket are to be provide. |
| 76 | OD1517/2025-2026:Supply and installation of wall mounting cubicle type dust and vermin proof size 4 , 600x400x230 mm or nearest suitable size, thermoplastic meterbox with provision for fixing KSEB meter.Supply and providing 3 Nos of 63A HRC porcelain fuse units with 40A HRC fuse link and 1No 63A 2way porcelain neutral link in the meter portion. Necessary holes are to be provided in the box for entry and exit of wire The inter connection should be done using 10.0 sq.mm copper wire. |
| 77 | OD1519/2025-2026:Supply and installation of wall mounting cubicle type dust and vermin proof , 600x400x230 mm or nearest suitable size, thermoplastic box including supply and fixing 63A, 25kA,4pole MCCB with BUC rotory drive kit , 230V ac shunt release ,ELR with CBCT including giving connection using 10.0 sq.mm pvc insulated copper wire, and 2A SPMCB with RYB indication lamp and wiring the circuit with 2.5 sqmm copper wire complete. |
| 78 | OD5451/2025-2026:Supply and installation of wall mounting cubicle type dust and vermin proof GRP hinged door type enclosure -IP66/IK 10 ,600 X 400 X 230 mm or nearest suitable size hinged type thermoplastic box with supply and fixing 100 A 16 kA 4P MCCB with BUC rotory drive kit, with 63A 2 way porceline neutral link -1 No, One set phase indication lamp(RYB), 2A SPMCB C-curve MCB -3 Nos, Panel mounting type CT- operated energy meter, 96 sq mm backlit LED Three phase, 4 wire, 415/50 Hz , Accuracy class of 0.5, Multi line LCD, with user buttons preffered make Secure Elite 440 or equivalant suitable for 415V 50 Hz- 1No ,50/5 tape wound class 1 CT, 10VA, Conformity IS 2705 /IEC 61869- 3 Nos . Sufficient holes for fixing phase indication lamp, multifunction meter and rotory handle in the thermoplastic box are to be provided.Necessary interconnection with suitable rated copper conductor with sockets are to be provided. work including all fixing accessories on wall and installation charges complete as required. |
| 79 | OD5452/2025-2026:Supply and installation of wall mounting cubicle type dust and vermin proof 600x400x230 mm, or nearest suitable size thermoplastic meterbox with provision for fixing KSEB energy meter. Supply and providing 3 Nos of 125A HRC porcelain fuse units with fuse link, 1No 125A 2way porcelain neutral link in the meter portion. Necessary holes are to be provided in the box for entry and exit of wire The inter connection should be done using 16.0 sq.mm copper wire. |
| 80 | OD5453/2025-2026:Supply and installation of wall mounting cubicle type dust and vermin proof , 600x400x230 mm, nearest suitable size thermoplastic box including supply and fixing 125A, 35kA,4pole MCCB with BUC rotory drive kit , 230V ac shunt release ,ELR with CBCT including giving connection using 10.0 sq.mm pvc insulated copper wire, and 2A SPMCB with RYB indication lamp and wiring the circuit with 2.5 sqmm copper wire complete. |
| 81 | OD3140/2026-2027:Supply ,Installation, testing and commissioning of pre - wired, weather proof LED luminaire IP65 rated having power consumption of 34 /40 W and light output not less than 2100 lm with system efficiency >120 lumens/watt. Luminaire housing made from superior quality of polycarbonate extrusion IP65 and and IK 08 protection. The luminaire should be having minimum 30000 Burning hours with CRI >=80 and co related colour temperature(CCT)of 6500K. of all types, complete with all accessories etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 82 | OD3141/2026-2027:Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of Vertical TPN DB - IP65, Weather proof Polycarbonate , dust protected, , inclusive of 125 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MMCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 Way including all accessories complete as required. |
| 83 | OD3142/2026-2027:Supply and fixing Cable Junction Boxes IP 65 weather proof type for outdoor applications Thermoplastic Polycarbonate ) suitable for cable sizes 2.5 sq.mm , ,80 X 80X 52 mm and accessories for Cable Junction Boxes such as Copper Terminal Set 2.5 sq.mm 5 Pole 1 No,including fixing the accessories using suitable size Stainless steel Bolt and nut, giving necessary connections, making good the damages etc. as required . |
| 84 | OD1524/2025-2026:Supply, installation, testing and commissioning (SITC) of outdoor / indoor industrial type LED Highbay light luminaire of system power rating 100 W, with minimum system efficacy of 150 lumens/watt (total initial lumen output not less than 15,000 lm, complete with pressure die-cast aluminium housing for optimal thermal management and high corrosion resistance, UV-stabilized high impact resistance IK08 polycarbonate diffuser / lens cover, and suitable suspension / mounting bracket arrangement.The luminaire shall be designed for operation under ambient temperatures ranging from 10C+55C, operating on 230 V 50Hz single-phase AC supply with an internal high-efficiency driver (Power Factor > 0.95, THD < 10%, surge protection minimum 4 kV/ 6 kV, and ingress protection IP65/IP66). Complete with internal wiring, earthing terminals, and all required mounting accessories, and as directed by the Engineer-in-Charge. |
| 85 | OD3144/2026-2027:Scaffolding Charges for mounting the flood light fixture in existing street light pole upto a length upto 15 mtr from ground level. The charges including hire charge, transportation, loading, unloading and all expense complete as required. |
| 86 | OD3145/2026-2027:Supply and fixing 3mtr long tubular pole made out of 50 mm Diameter (Class B) GI pipe with ISI Mark, on roof slab by using flange and muffings 0.3x.3x.3m near to the column, clamping the pipe to the RCC column using MS clamps made out of 25x5 mm MS flat and anchor bolts, filling the space between slab and pole using PCC 1:11/2:3 (M20), constructing muffing of size 30 cmx30cmx30cm in M20 mix. The top of the pole must be closed with Table E MS flange and dummy flange, bolted with stainless steel nut and bolts and it must have an inverted Y arrangement using 25mm Gl medium pipe 10cm long welded to the pole 10 cm below the top flange to take outgoing wire. The tubular post shall be painted with two coats of epoxy primer and epoxy paint of approved make and colour. |
| 87 | OD3146/2026-2027:Engaged Labour for maintenance work for dismounting/fixing the existing light fittings, cables and other electrical accessories from the existing fixtures including rectifying minor defects, tightening nut and bolts ,overall check-up, change the cable and welding and fabrication work for minor defects including materials complete as directed by engineer in charge at site including all maintenance work complete as required. |
| 88 | OD5086/2025-2026:Supply, installation, testing and commissioning (SITC) of outdoor surface / wall-mounted LED linear / spot Wall Washer luminaire of system power rating 10 W, delivering a minimum total initial luminous flux of 950 lumens in Warm White color temperature 2700 K - 3000 K, with integrated/in-built high-efficiency LED module and optical lens arrangement designed specifically for uniform wall-washing and facade highlighting.The fixture shall be constructed from heavy-duty, high-grade pressure die-cast / extruded aluminium with premium outdoor-grade weather-resistant powder coating, equipped with clear toughened optical glass cover, silicone rubber gaskets, providing ingress protection rating of IP65 (completely dust-proof and water-jet resistant).Complete with an internal electronic driver operating on 230 V 10% 50Hz single-phase AC supply (Power Factor 0.90, THD} < 15%, Color Rendering Index CRI} 80, surge protection minimum 2.5 kV / 4 kV, internal wiring, adjustable mounting brackets/tilt mechanism, SS 304 fasteners, earthing terminal, and all necessary hardware fixings and as directed by the Engineer-in-Charge. |
| 89 | OD5088/2025-2026:Supply, installation, testing and commissioning (SITC) of surface ceiling-mounted, circular / round type LED luminaire of system power rating 20 W, with Full Glow / Rimless uniform diffuser panel and durable metallic (CRCA / Sheet Steel / Extruded Aluminium) body, delivering a Neutral White color temperature of 4000 K, with minimum system efficacy of 100 lm/W (minimum total initial lumen output of 2000\ lm.The luminaire shall be equipped with an integral high-efficiency electronic driver operating on 230V 50 Hz single-phase AC power supply (Power Factor 0.95,THD < 10%, Color Rendering Index CRI80, surge protection minimum 2.5 kV, complete with internal wiring, heat sink, mounting plate/brackets, masonry fixings, earthing connection, and all required hardware accessories. and as directed by the Engineer-in-Charge. |
| 90 | OD5089/2025-2026:Supply, installation, testing and commissioning (SITC) of ceiling recessed / surface mounted circular COB (Chip-on-Board) LED spotlight luminaire of system power rating 7 W, with high-efficiency optical reflector delivering a focused beam angle (typically 15- 36), and Cool White / Neutral White color temperature (4000 K - 6500 K), with a minimum total initial luminous flux of 630 lumens (minimum efficacy 90 lm/W).The fixture shall be constructed of heavy-duty die-cast / extruded aluminium housing with high thermal dissipation capacity, powder-coated rim/bezel, clear glass / polycarbonate optical lens, and adjustable/fixed optical assembly.Complete with external / internal high-efficiency constant-current electronic driver suitable for 230 V 50 Hz single-phase AC power supply (Power Factor 0.90, Total Harmonic Distortion THD < 15%, Color Rendering Index CRI 80, surge protection minimum 2.5 kV, internal interconnections, ceiling retention spring clips / mounting arrangement, earthing connection, and all necessary hardware fixings. and as directed by the Engineer-in-Charge. |
| 91 | OD5090/2025-2026:Supply, installation, testing and commissioning (SITC) of ceiling recessed mounted circular / square type LED downlight luminaire of system power rating 22 W, delivering a minimum total initial luminous flux of 2200 lumens (minimum system efficacy of 100 lm/W in Cool White / Neutral White color temperature (4000 K - 6500 K, with glare-free high-transmittability opal polycarbonate diffuser and pressure die-cast aluminium / extruded aluminium housing with integrated heat sink for efficient thermal management.The luminaire shall be complete with an external / internal high-efficiency constant-current electronic driver operating on 230 V 50 Hz single-phase AC power supply (Power Factor 0.95, Total Harmonic Distortion THD < 10%, Color Rendering Index CRI 80, surge protection minimum 2.5kV, heavy-duty spring-loaded retention clips/clamps for false ceiling mounting, internal interconnecting wiring, earthing terminal, and all required hardware accessories and as directed by the Engineer-in-Charge. |
| 92 | OD5115/2025-2026:Supply and installation of wall mounting cubicle type dust and vermin proof 600 x 400 x 230 mm Glass Fibre Reinforced Polyester Enclosure with hinged door, IP66, IK 10 outdoor meterbox or equivalent with base plate for fixing KSEB meter, cut out & Neutral link and 20A , 10kA SPN MCB, C curve , with sufficient holes for fixing KSEB electronic energy meter, cut outs and neutral link. 1 No 32A HRC fuse units with 20A HRC fuse link and 1No 32A 2way neutral link in the meter portion. Necessary holes are to be provided in the box for entry and exit of wire. The inter connection should be done using 4sq.mm copper wire. complete as required. |
| 93 | OD5458/2025-2026:Supply, testing and delivery at site of heavy-duty, wall-mounted industrial switched socket-outlet box with mechanical interlock arrangement, rating 63 A, 415 V, 50Hz AC, 5-pin configuration (3 Pole + Neutral + Earth / 3P+N+E), with ingress protection rating of IP67 (watertight/weatherproof) and mechanical impact protection IK08 / IK09. The unit shall feature an integrated rotary switch mechanically interlocked with the socket outlet such that the switch cannot be turned 'ON' unless the plug is fully inserted, and the plug cannot be withdrawn while the switch is in the 'ON' position. Constructed from high-grade, self-extinguishing, chemical and UV-resistant thermoplastic / polycarbonate housing, complete with internal brass terminal blocks, internal copper interconnecting wiring, heavy-duty continuous neoprene/silicone gasket, nickel-plated contacts, gland entry plate, earthing terminals, masonry fixings, and all required mounting accessories. as directed by the Engineer in charge at site. |
| 94 | OD5461/2025-2026:Scraping, wire brushing, and thorough cleaning of existing rusted / painted metal surfaces of electrical control panels, feeder pillars, distribution boards, and transformer bodies/tanks to remove oil, grease, rust, loose scale, and old flaking paint using mechanical wire brushes, emery paper, and solvent washing to achieve a smooth, clean metal substrate.Applying two coats of two-pack epoxy-based industrial primer (minimum dry film thickness / DFT of 35-40 microns per coat), followed by applying two coats of top-quality synthetic enamel paint of approved brand and shade (minimum DFT of 25-30 microns per coat) to achieve a uniform, durable, corrosion-resistant gloss finish.Item includes all required scaffolding, masking of meters/indicators/nameplates/bushings, supply of all materials, labor, tools, equipment, surface preparation, solvent cleaning, and cleanup, as per PWD General Specifications for Electrical Works / Civil Painting Specifications and as directed by the Engineer-in-Charge |
| 95 | OD5462/2025-2026:Supply, conveyance, fixing, testing and commissioning of 4-Pole, 63 A, 415 V / 440 V, 50Hz AC, On-Load Changeover Switch in open execution (without enclosure), conforming to IS/IEC 60947-3 / IS 13947 (Part 3), Utilization Category AC-23A, for continuous duty operation.The switch shall be suitable for mounting inside an existing distribution board / feeder pillar panel enclosure, complete with quick-make, quick-break mechanism, door interlock arrangement with padlocking facility in 'OFF' position, extended operating handle, phase barriers, heavy-duty silver-plated copper contacts, terminal shrouds, internal interconnections, earthing connection, and all necessary hardware fixings as per PWD General Specifications for Electrical Works and as directed by the Engineer-in-Charge. |
| 96 | OD5465/2025-2026:Supply, installation, testing and commissioning (SITC) of wall-mounting, modular cubicle type, dust and vermin-proof Polycarbonate Enclosure of nominal outer dimensions 300 mm (W) x 600 mm (H) x 170 mm (D), complete with transparent / opaque hinged or hand-operated turn-lock door, heavy-duty continuous polyurethane gasket, internal mounting plate / DIN rails, and earthing terminals. The enclosure shall be manufactured from high-grade, self-extinguishing, halogen-free, UV-resistant polycarbonate material with an ingress protection rating of IP65 / IP66 (dust-tight and water-jet resistant) and mechanical impact resistance of IK08 / IK09 (high impact resistance) for outdoor application. Item includes providing necessary knockout cable entries / stepped cable glands at top and bottom, internal wiring support, wall mounting brackets, heavy-duty masonry fixings, hardware, earthing interconnections, and all required accessories as directed by the Engineer-in-Charge. |
| 97 | 90.3.19.3:Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture |
| 98 | OD3147/2026-2027:Supply and installation of LED Bulk Head fitting 10W with Aluminum die-cast housing and olycarbonate optic materials including connection, fixing etc complete as required. The luminaire shall have IP66 protection, luminous flux 1100 lm, luminous efficiency 110 lumens/watt, cool daylight colour and 6500k colour temperature .complete as required. |
| 99 | OD5468/2025-2026:Supply, installation, testing and commissioning (SITC) of surface / suspended mounted, ultra-slim linear LED luminaire of system power consumption not exceeding 32 W, delivering a minimum initial luminous flux of 3000 lumens (efficacy > 90 lm/W in Cool Daylight color temperature (6500 K), featuring high-efficiency opal extruded optical diffuser with minimal bezel profile for continuous or standalone mounting.The fixture housing shall be manufactured from high-grade extruded aluminium / CRCA sheet metal with an elegant powder-coated white finish, providing optical protection rating of IP20 and mechanical impact resistance IK02. Complete with integral fixed-output electronic power supply unit (PSU Driver) suitable for 220 - 240 V AC 50Hz single-phase operation (Power Factor 0.95, Total Harmonic Distortion THD < 10%, Color Rendering Index CRI80, surge protection minimum 2kV, rated operational lifespan minimum 50,000 burning hours @ L70/B50. Item includes all internal interconnections, surface mounting hardware / suspension wire kit assembly, earthing terminals, masonry fixings, and all required accessories as per PWD General Specifications for Electrical Works and as directed by the Engineer-in-Charge. |
| 100 | OD5475/2025-2026:Supplying and making end termination with nickel-plated single compression brass cable gland for 1.1 kV grade, 2 core 2.5 sq.mm PVC insulated, PVC sheathed, armoured copper conductor cable.Item includes providing heavy-duty nickel-plated brass cable gland complete with check nut, rubber ring/gasket, PVC shroud, heavy-duty earth clamp / earthing ring/clip, compression type superior quality tinned copper cable lugs / sockets for both cores, crimping, insulating tape/sleeving, making necessary earth continuity connections using tinned copper tape/wire, and connecting the cable cores to switchgear / terminal block, as directed by the Engineer-in-Charge. |
| 101 | OD5476/2025-2026:Supply and ,laying of 1.1kV grade 2 core 2.5 sq.mm PVC insulated, PVC outer sheathed, armoured copper conductor control cable, with stranded high-conductivity annealed copper conductors, conforming to IS 1554 (Part 1) / IS 7098 (Part 1).The cable shall feature color-coded core insulation, extruded PVC inner sheath, galvanized steel wire / flat strip armouring for mechanical protection, and an overall flame-retardant (FR / FRLS) PVC outer sheath.Item includes drum handling, site delivery, factory test certificates (FTC), sequential length marking on outer sheath, and supplying in standard non-returnable wooden/steel drums, as directed by the Engineer-in-Charge |
| 102 | OD5477/2025-2026: Supply and ,laying of 1.1kV grade 4 core 2.5 sq.mm PVC insulated, PVC outer sheathed, armoured copper conductor control cable, with stranded high-conductivity annealed copper conductors, conforming to IS 1554 (Part 1) / IS 7098 (Part 1).The cable shall feature color-coded core insulation, extruded PVC inner sheath, galvanized steel wire / flat strip armouring for mechanical protection, and an overall flame-retardant (FR / FRLS) PVC outer sheath.Item includes drum handling, site delivery, factory test certificates (FTC), sequential length marking on outer sheath, and supplying in standard non-returnable wooden/steel drums, as directed by the Engineer-in-Charge |
| 103 | OD3148/2026-2027:Supplying and fixing following way, MCB distribution board, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, with PE+N terminals, thermoplastic circuit breaker boxes IP65 with metric knock out for cable entry, 1 row 12 module size 295 x 333 x 129 or nearest suitable size with PE+N terminals including earthing etc. as required. (But without MCB/RCCB/Isolator) 1 row 12 module with PE+N terminals complete . |
| 104 | OD5470/2025-2026:Supplying and fixing following way, MCB distribution board, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, with PE+N terminals, thermoplastic circuit breaker boxes IP65 with metric knock out for cable entry, 1 row 9 module size 202 x 238 x 111 or nearest suitable size with PE+N terminals including earthing etc. as required. (But without MCB/RCCB/Isolator) 1 row 9 module with PE+N terminals complete . |
| 105 | OD6003/2025-2026:Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required. 4 X 6 sq. mm |
| 106 | CIVIL WORK |
| 107 | 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 108 | 5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender