Tender For Repair To Joinery, False Ceiling, Sanitary Fitting And Connected Works In Tech Area Under Age B/R-Ii At Afs Thanjavur.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
14 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, False Ceiling, Sanitary Fitting And Connected Works In Tech Area Under Age B/R-Ii At Afs Thanjavur.
BOQ
| Sl. No. | Item Description |
| 1 | Please Enable Macros to View BoQ information |
| 2 | Taking down aluminium doors and windows of any description including complete aceessories of any type complete all as specified and as directed |
| 3 | Supply and fix powder coated aluminium frame for doors/windows/ventilators minimum thickness of powder coating is 50 micron with one or more rebates etc as in windows/ ventilators including necessary joining cleat, glazing clips, rubber neoprene packing complete all as specified and as directed. Note Glass shall be paid separately under relevant items. |
| 4 | Supply and fix powder coated aluminium window and ventilator shutters, door shutter,side hung type withour sash bars aluminium section of weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges 01 No per shutter of windows, snap beading etc complete all as specified and as directed. Note: Glass shall be paid separately under relevant items. |
| 5 | Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos and 03 Nos of hinges in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and as directed |
| 6 | S&F prelaminated particle board 19 mm thick, interior grade, prelaminated both sides with decorative choice lamination fixed with rubber beading and suitable adhesive as in aluminium door shutter etc complete all as specified and as directed. |
| 7 | S/F 5 mm thick sheet tinted glass ordinary quality and glazing with aluminium clip square exc 0.5 sqm in each pane complete all as specified and as directed |
| 8 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 9 | Taking down chowkhats or frame with shuters (without taking shutter from frame) exc 1.5 sqm and n. exc 4.0 sqm and removing from site complete all as specified and as directed |
| 10 | Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including hold fasts and PCC block complete all as specified and as directed |
| 11 | Taking down shutter of any description, exceeding. 1Sqm and not exceeding 2 sqm each and removing from site complete all as specified and as directed |
| 12 | Taking down shutter of any description, exceeding. 2 Sqm and not exceeding 4 sqm each and removing from site complete all as specified and as directed |
| 13 | S &F of second class H.W 'teak' plain solid straight chowkats and frames wrought framed rebated on chamfered put together with glue pinned at joints etc complete all as specified and as directed |
| 14 | S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed |
| 15 | S & F 35 mm thick II class HW Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and midred beads for securing glass, etc.; as per section 8.28 (a) sizes of members of shutters complete all as specified and as directed |
| 16 | S & F Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification complete all as specified and as directed |
| 17 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification complete all as specified and as directed. |
| 18 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking down old unservicable one complete all as specified and as directed |
| 19 | S & F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including takig down old unservicable one complete all as specified and as directed |
| 20 | S&F 100 mm size Mild steel butt hinges medium weight, fixed to chowkhat complete all as specified and as directed |
| 21 | S&F 75 mm size Mild steel butt hinges medium weight, fixed to chowkhat complete all as specified and as directed |
| 22 | S & F 100 mm long aluminium anodised barrel tower bolt complete all as specified and as directed |
| 23 | S & F 150 mm long aluminium anodised barrel tower bolt complete all as specified and as directed |
| 24 | S&F 150 mm long aluminium handle fabricated type anodised complete all as specified and as directed |
| 25 | S&F 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections with fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed |
| 26 | S&F 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed |
| 27 | M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface complete all as specified and as directed |
| 28 | S&F in repairs 100 mm size mild steel body Mortice lock, vertical type, with 4 lever, fixed to aluminium door complete all as specified and as directed |
| 29 | S&F in repairs 4 mm thick glass sheet ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete including hacking out old broken window pane complete all as specified and as directed |
| 30 | S & F in repairs 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete including hacking out old broken window pane complete all as specified and as directed |
| 31 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed |
| 32 | S&F anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mmx36.50mmx1.50mm, cross Tee of size 23.50mmx23.50mmx1.50mm and wall angle of size 36.00mmx25.00mmx1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls including provision of 18 to 19mm thick perforated calcium silicate board as in ceiling, flat or sloping and applying two coats of acrylic distemper over a coat of primer complete all as specifed and as directedNote :- Rate quoted above shall be deemed to include for making holes, cutting chasis if any required and making good to existing walls in cement mortar 1: 3 to match with existing surface finish as directed at site. |
| 33 | M&L 20mm thick perforated calcium silicate board as in sound proofing of walls etc in any position and in any direction and applying two coats of OBD over a coat of primer complete all as specifed and as directed |
| 34 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land complete all as specifed and as directed |
| 35 | M&L plastering 15mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed. |
| 36 | M&L cement plaster 5mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and as directed. |
| 37 | M&L for preparation of new plastered/concrete surfaces of walls, providing 3mm thick Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatible priming paint complete all as specified and as directed. |
| 38 | M&L Preparation of new ceiling surfaces and applying two coats of oil distemper emulsion on ceiling over a coat of primer surfaces complete all as specified and as directed. |
| 39 | S&F mild steel 25x3mm MS Flat for holdfast, cleat etc. for door frame etc. conforming to Fe-410-0 or Fe-310 complete all as specified and as directed. |
| 40 | M&L PCC 1:3:6 type C1 (using 20 mm graded agg.) as in hold fast block incl. necessary form work complete all as specified and directed. |
| 41 | S&F in repairs half/quarter turn 15 mm bore bib tap, cast brass chromium plated type with crutch or butterfly handle, screwed for iron pipe long body, (Weight not less than as specified in SSR) complete all as specified and as directed |
| 42 | S&F in repairs half/quarter turn 15 mm bore bib tap, cast brass chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe short body, (Weight not less than as specified in SSR) complete all as specified and as directed |
| 43 | S&F in repairs half/quarter turn 15 mm Stop valves, cast brass chromium plated with crutch or butterfly handle complete all as specified and as directed |
| 44 | S&F in repairs half/quarter turn 15 mm Stop valves, cast brass chromium plated fancy type with crutch or butterfly handle complete all as specified and as directed |
| 45 | S&F in repairs half/quarter turn 20 mm Stop valves, cast brass chromium plated fancy type with crutch or butterfly handle complete all as specified and as directed |
| 46 | S&F in repairs half/quarter turn 15 mm dia Angle cock, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe complete all as specified and as directed |
| 47 | S&F in repais Health faucet suitable chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed |
| 48 | S&F fix in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe complete all as specified and as directed |
| 49 | S&F in repairs fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe complete all as specified and as directed |
| 50 | S&F in repair 15mm dia brass, chromium plated WHB mixer tap for mixing hot & cold water, screwed down, complete all as specified and as directed |
| 51 | S&F in repairs 125 mm shower rose chromium plated with swivel joints suitable for fixing to 15 mm GI/UPVC/CPVC pipe or union complete all as specified and as directed |
| 52 | Taking down old U/s pipe GI/PVC/CPVC/UPVC of any description from wall complete incl all connecting accessories complete all as specified and as directed |
| 53 | S&F 15 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors, complete all as specified and as directed |
| 54 | S&F fix 20 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors, complete all as specified and as directed |
| 55 | S&F 25 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors, complete all as specified and as directed |
| 56 | Dismantling water tanks exc 500 and not exc 1000 ltr cap and removing to store complete all as specified and directed. |
| 57 | Dismantling water tanks exc 1000 and not exc 2000 ltr cap and removing to store complete all as specified and directed. |
| 58 | S&F in repairs sinks with drainage boards made of stainless steel 1 mm thick kitchen with plugs , washers and waste; including bedding in cement mortar to dwarf wall/Granite or including fixing and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete (sink counter sunk into granite platform) complete all as specified and as directed |
| 59 | S & F in repair Glass shelf 600mm complete all as specified and as directed |
| 60 | S&F in repairs anodised aluminium alloy body door stopper 150 mm size complete all as specified and as directed |
| 61 | S&F 1000 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed top) twisted and fixed in position complete all as specified and as directed |
| 62 | S&F 2000 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed top) twisted and fixed in position complete all as specified and as directed |
| 63 | S & F in repairs vitreous china wash down water closet (Pedestal pattern) white with 'P' trap complete including plastic seat cover white closed pattern with flat bottom, and cover with plastic hinges complete all as specified and as directed |
| 64 | S&F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm fixed to wall by anchor bolts excluding taps, waste coupling, waste pipe etc complete all as specified and as directed |
| 65 | S&F in repair PVC low level flushing cistern 10 Ltr capacity incl float valve and flush pipe complete all as specified and as directed |
| 66 | S&F in repairs PVC inlet connections 60 cm long, 15 mm bore with PTMT nuts complete all as specified and as directed |
| 67 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass with(frameless) complete all as specified and as directed |
| 68 | S&F in repairs Towel rail chromium plated, fixed in repairs complete 600mm long complete all as specified and as directed |
| 69 | S&F in repairs Solar control film 25 micron reflective type ticked to glass panes as per manufacturer's instructionscomplete all as specified and as directed. |
| 70 | S&F in repairs door closer aluminium (extruded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 71 | S&F in repairs Toilet paper holder SS fixed in repairs complete all as specified and as directed. |
| 72 | S&F in repairs Stainless steel soap dish fixed with SS screws complete all as specified and as directed |
| 73 | S & F in repair CP grating 100 mm dia with /without hole complete all as specified and as directed |
| 74 | S&F in repair Plastic water closet seat cover (any Type) black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender