Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #56660189

Tender For Comprehensive Repair To B/R Work At Dhar Ur Under Ge (I) Cg Porbandar

Issued by Statutory Bodies & Commissions/Committees · Porbandar, Gujarat
Tender Value
20 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
17 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Porbandar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Comprehensive Repair To B/R Work At Dhar Ur Under Ge (I) Cg Porbandar- 2 Taking Down Chowkhat With Shutters (Without Taking Of Shutters From The Frames) Of Any Description N.Exc 1.5 Sqm In Each Panel Complete All As Specified And As Directed. 3 Taking Down Chowkhat With Shutters (Without Taking Of Shutters From The Frames) Of Any Description Exc 1.5 Sqm But Nexc 4 Sqm In Each Panel Complete All As Specified And As Directed. 4 Taking Down Shutters Of Any Description Exc 1 Sqm And N.Exc 2 Sqm Each Complete All As Specified And As Directed. 5 Supply And Fixing For 2Nd Class Hw Plain Chowkhats And Framed, Rebated On The Solid Rounded Or Chamfered Put Together With Glue Pinned At Joints Complete All As Specified And As Directed. 6 Supply And Fixing For Second Class Hard Wood Plain, Framed, Panelled Shutters 35Mm Thick, (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density Wood Particle Board With Commercial Faces Veneers Supplied And Fixed To Chowkhats Complete All As Specified And As Directed. 7 Supply And Fixing For 35 Mm Thick Second Class Hard Wood Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc., Divided Into Squares, With Plain, Chamfered Or Rounded, Mitred And Rebated Sash Bars, Any Numbers, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut Mitred Beads For Securing Glass Etc. As Specified In Ssr Part I, Section 8, Clause 8.20 (A) Complete All As Specified And As Directed. 8 Supply And Fixing For 35 Mm Thick Flush Shutter, Solid Core Construction, With Block Board Core And Plywood Face Panels, Both Face Is Covered With Decorative Face Veneer With Lipping/ Frame To Match Commercial Type On Both Side Complete All As Specified And As Directed. 9 Supply And Fixing Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing As Specified And As Directed. 10 S & F For Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C’ Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail, Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing. 11 Preparation Of New Or Previously Treated Wood Surfaces Of Any Description, Over 10 Cm Width Or Girth, Not Otherwise Described Applying One Coat Of Pink Primer And Applying Two Coat Of Synthetic Enamel Paint Complete All As Specified. 12 Supply And Fixing For Mild Steel, 300Mm, Brass Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete Fixed As Directed. 13 Supply And Fixing For 125 Mm Long Butt Hinges, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised And Fixed, Type B-22 As Specified And As Directed. 14 Supply And Fixing For 150 Mm Long Extruded Aluminium Alloy Handles, Fabricated Type, Anodised As Specified And As Directed. 15 Supply And Fixing For 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And As Directed. 16 Supply And Fixing 300 Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy Etc Complete All As Specified And As Directed. 17 Supply And Fixing Mild Steel In Repair 300Mm, Brass Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete Fixed As Directed. 18 Supply And Fixing In Repair For 125 Mm Long Butt Hinges, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised And Fixed, Type B-22 As Specified And As Directed. 19 Supply And Fixing In Repair For 150 Mm Long Extruded Aluminium Alloy Handles, Fabricated Type, Anodised Complete All As Specified And As Directed. 20 Supply And Fixing In Repair For 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And As Directed. 21 Supply And Fixing In Repair 300 Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy Etc Complete All As Specified And As Directed. 22 Supply And Fixing For Prelaminated Partical Board 18/19Mm Medium Density ,Prelaminated With Both Side With One Decorative Choice Lamination And Other Side Balancing With White Lamination Fixed With Screws As In Shelves To Kitchen Almirah And Cub Board Fixed In Repair.(Including Wooden Bedding 18-20Mm Wide With Complete Fittings), Complete All As Specified And As Directed. 23 Supply And Fixing Hasp And Staple For 100 Mm, Safety Type, Aluminium Anodised With Mild Steel Hinge Pin Including Bolt To Hinge Plate And Fixed With Screws, Complete All As Specified And As Directed. 24 Supply And Fixing In Repair Hasp And Staple For 100 Mm, Safety Type, Aluminium Anodised With Mild Steel Hinge Pin Including Bolt To Hinge Plate And Fixed With Screws, Complete All As Specified And As Directed. 25 Supply And Fixing 140Mm Long Aluminium Anodized Floor Door Stopper Double Legged With Rubber Shoe, Fixed To Bottom Rail Of Door Complete All As Specified And Directed. 26 Supply And Fixing In Repair 140Mm Long Aluminium Anodized Floor Door Stopper Double Legged With Rubber Shoe, Fixed To Bottom Rail Of Door Complete All As Specified And Directed. 27 Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden Frames Or Stone, Concrete, Aluminium Or Brick Surrounds, Glazed With Putty Or Fixed With Beads Complete All As Specified And As Directed. 28 Supply And Fixing For 4 Mm Thick Figured Glass, Pin Headed Type And Glazing With/ Without Oil Putty In Squares Not Exceeding 0.5 Sq. M In Each Pane In Metal Or Aluminium Window Complete All As Specified And As Directed. 29 S/F For Staineless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Aluminium/Pvc Sections Complete All As Specified And As Directed. 30 Supply And Fixing In Repair For Staineless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Aluminium/Pvc Sections Complete All As Specified. 31 Dismantling, Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And As Directed. 32 M & L For 10 Mm Thick Vitrified Tile Of Area Exceeding N.Exc 0.36 Sqm In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick 1:6 Complete All As Specified And As Directed. 33 M & L 10 Mm Thick Vitrified Tile Of Area Exceeding N.Exc 0.36 Sqm In Vertical Surfaces Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including Cement Plaster Mortar 15 Mm Thick 1:4 Cm, Complete All As Specified And As Directed. 34 Supply And Fixing For Non Skid Ceramic Coloured Tiles 7 To 8 Mm Thick (Square/Rectangular) Area Of Each Tile N Exc 0.11 Sqm In Floors, Over And Including 15Mm Thick Screed In Cm (1:4) Set And Jointed In Neat Cement Slurry And Pointed With White Or Coloured Cement To Match. 35 Material & Labour For Glazed Ceramic Tiles In Vertical Surface 350X 250X 7 Mm/ 450X 300X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match And Including 15Mm Cement Plaster In 1:4 Cm, Complete All As Specified And As Directed. 36 Supply And Fixing, Pvc Floor Trap 75Mm Bore With Grating Incl Jointing Using Solvent Cement To Waste Pipe Fixed In Cement Concrete Type B1 (1:2:4) Complete All As Directed 37 Taking Down Eaves Gutter Or Rwp Of Any Description Including Fittings Complete All As Specified And As Directed. 38 Supply And Fixing For 110Mm Dia Pvc Rain Water Pipe Of Pressure Single Socketed With Rubber Joint, Jointed With Solvent Joint Fixed To Wall Complete All As Specified And As Directed. 39 Supply And Fixing For 110Mm Dia Pvc Band Any Radius As Specified And As Directed. 40 Supply And Fixing For Pvc (Swr) Pipes 110 Mm Bore Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Completed All As Directed. 41 Supply And Fixing For Pvc (Swr) Pipes75 Mm Bore Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Completed All As Directed. 42 Supply And Fixing Pvc (Swr) Bends 110 Mm Bore With/Without Access Door Any Radius Complete All As Directed. 43 Supply And Fixing For Pvc (Swr) Bends 75Mm Bore With/Without Access Door Any Radius Complete All As Directed. 44 Supply And Fixing Pvc (Swr) Single Junction T 75 Mm Bore With Access Door Any Radius Complete All As Directed. 45 Supply And Fixing Pvc (Swr) Single Junction T 110Mm Bore With Access Door Any Radius Complete All As Directed. 46 Taking Up Or Down 15Mm Bore Dia, Steel Tubing & Connections Incl Cleaning For Refixing Or Removal To Store. 47 Taking Up Or Down 20Mm Bore Dia, Steel Tubing & Connections Incl Cleaning For Refixing Or Removal To Store. 48 Supplying And Laying For 16 Mm Dia Cpvc Pipes Sdr 11 & Fittings On Walls/Ceilings Or Laying In Floors Complete All As Specified And As Directed 49 Supplying And Laying For 20 Mm Dia Cpvc Pipes Sdr 11 & Fittings On Walls/Ceilings Or Laying In Floors Complete All As Specified And As Directed 50 Supply And Fixing For Brass Elbow For Special Fitting Of 16 Mm Bore Cpvc Pipe Complete All As Specified And Directed. 51 Supply And Fixing For Brass Tee For Special Fitting Of 16 Mm Bore Cpvc Pipe Complete All As Specified And Directed. 52 Supply And Fixingfor Male Brass Threaded Adaptor Tee For Special Fitting Of 16 Mm Bore Cpvc Pipe Complete All As Specified And Directed. 53 Supply And Fixing In Repair 15 Mm Bib Tap (Fancy Type) Cast Copper Alloy Chromium Plated With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed. 54 S/F In Repairs Brass Cp Shower Rose 125Mm Size Fancy Type With Swivel Joint Any Size Incl Fixing To Steel Pipe/Union For 15Mm Dia Complete All As Specified And As Directed. 55 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of 20Mm (Min. Weight 210 Gms) Complete All As Specified And As Directed. 56 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of 15Mm (Min. Weight 142 Gms) As Specified And As Directed. 57 Supply And Fixing In Repair Pillar Taps, 15Mm Dia, Fancy Type, Cast Copper Alloy With Capstan Heads, Chromium Plated, Screwed Down High Pressure, Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe As Specified And As Directed. 58 Supply And Fixing In Repair Pvc Connection Of 15Mm Dia Length 600Mm As Specified And As Directed. 59 Supply & Fixing In Repair Central Hole Basin Mixer With Popup Waste System, Complete All As Specified And As Directed. 60 Supply And Fixing Wall Mixer 2 In 1 With Provision For Overhead Shower With 115Mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges, Complete All As Specified And As Directed. 61 Supply And Fixing In Repair (Syphon Internal Fitting) Of Pvc Low Level Flushing Cistern As Per Existing Pattern To Make The Pvc Low Level Flushing Cistern Fully Functional Complete All As Specified & As Directed. 62 Supply And Fixing In Repair (Syphon Internal Fitting) Of Single Piece Ewc Flushing Cistern As Per Existing Pattern To Make The Flushing Cistern Fully Functional Complete All As Specified & As Directed. 63 Supply And Fixing In Repair Mirror Of Size 762 Mm X 1727 Mm As Selected Quality Glass, Mounted On 6 Mm Thick Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Fixed In Repairs Complete All As Specified & As Directed. 64 Dismantling Water Tanks Of Capacity Of Exc 500 Liter But N Exc 1000 Liters And Removing To Store ,Complete All As Specified And As Directed. 65 Supply And Fixing For 1000 Ltrs Capacity Hdpe Rotational Moulded Polyethylene Water Storage Tanks Minimum Three Layer, Isi Marked (Cylinder Vertical With Class Top) Hoisted And Fixed In Position Complete All As Specified & As Directed. 66 Supply And Fixing For 750 Ltrs. Capacity Hdpe Rotational Moulded Polyethylene Water Storage Tanks Minimum Three Layer, Isi Marked (Cylinder Vertical With Class Top) Hoisted And Fixed In Position All As Specified And As Directed. 67 Supply And Fixing In Repair Vitreous China Wash Down Water Closet Pan (Pedestal Pattern), White With P Or S Trap With And Including Plastic Water Closet Seat Cover, Connection To Trap, Flushing Pipe & Anti -Syphonage Pipe Etc Including Necessary Materials For Fittings & Making Good To Floor Complete All As Specified And As Directed. 68 Supply And Fixing For In Repairs 10 Ltrs. Capacity Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets Slimline Or Equivalen Make / Model With All Accessories Complete All As Specified And As Directed. 69 Supply And Fixing For In Repair Vitreous China Ware Wash Hand Basin White, Oval Type , Size 550X400 Mm Size With Cutting For And Pinning Ends Of Brackets Or Erecting Stand Including, Chromium Plated 15Mm Pillar Cock, Pvc Connection 450 Mm Long, Cp Waste Coupling, 32 Mm Dia Pvc Pipe Complete All As Specified And As Directed. 70 Supply And Fixing In Repair For Bevelled Edge Mirror, 600Mmx450Mm Of Selected Quality Glass, Mounted On 6 Mm Thick Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Fixed In Repairs Complete All As Specified And As Directed. 71 Supply And Fixing For In Repair 20Mm Aluminium Anodised Tubular Towel Rail, 20Mm Dia, D Type, 60Cm Long Between Flanges Complete All As Specified And As Directed. 72 Supply And Fixing In Repairs Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position, Complete All As Specified And As Directed. 73 Supply And Fixing For In Repair 15 Mm Bore Stop Valves/ Angle Valve, Cast Copper Alloy Fancy Type Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends For Iron Pipe Or For Unions Complete All As Specified And As Directed. 74 Supply And Fixing In Repair For 15 Mm Dia Cp Two Way Angle Valve Fixed In Pipe Complete All As Specified And As Directed 75 Supply And Fixing In Repair 20 Mm Dia Stop Valves / Gate Valve, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed Complete All As Specified And As Directed. 76 Supply And Fixing In Repair Stop Valves/Angle Valves Of Size 15Mm Dia Fancy Type, Chromium Plated With Long Shank And Cup (Concealed Type), Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed Complete All As Specified And As Directed. 77 Supply And Fixing In Repair 15Mm Bore Brass Spindle Of Best Quality Suitable For Bib Tap And Stop Cock To Make The Bib Tap And Stop Cock Fully Functional Complete All As Specified And As Directed. 78 Supply And Fixing In Repair 15Mm Bore Rubber Washer Of Best Quality Suitable For Bib Tap And Stop Cock All As Specified And As Directed. 79 Supply And Fixing Sinks With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboutery With Plugs, Washers And Wastes Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915 Mm X 460Mm Bowl Size 410 Mm 330 Mm X 160Mm As Specified And As Directed. 80 Supply And Fixing In Repair Harrison Rails Stainless Steel (Curtain Rod/Drapery Rod), 20Mm Dia, Fency Type Bracket 2 Nos Of Each Opening And Side Stopper Fency Type Required Shape And Size 2 Nos Of Each Opening, Complete All As Specified And As Directed. 81 Supply And Fixing In Repair Plate Racks Made Out Of 1Mm Thick .Stainless Steel, Of Size 750X600X 250Mm All As Specified And Directed (Make Of Plate Ot Be Used Shall Be Sail, Iindal, Suraj Or Equivalent As Approved By Ge). 82 Supply And Fixing In Repair 32Mm Dia And 900Mm Long Pvc Waste Pipe Suitable For Sink, Whb And Urinal, Complete All As Specified And As Directed. 83 Supply & Fixing In Repair Waste Coupling Of 32Mm Dia Brass Cp For Glazed Ware Sink Basins, Etc With Long Screwed Shanks And Fly Nuts Fanges End Complete All As Specified And As Directed. 84 Supply And Fixing In Repair Waste Coupling Of 40Mm Dia Brass Cp For Glazed Ware Sink Basins, Etc With Long Screwed Shanks And Fly Nuts Fanges End Complete All As Specified And As Directed. 85 Supply & Fixing In Repairs Plastic Water Closet Seat, White/Black, Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device, Complete All As Specified And As Directed. 86 Material & Labour For Preparartion Of Old Surface Of Wall And Applying One Coats Of Oil Bound Distemper Including Filling Undulation With Wall Care Putty As Per Manufacture Instruction With Smooth Roller Finish ,Complete All As Specified And Directed By Engineer In Charge(Note After Painting ,Cleaning Of All Floors,Glassupply And Fixingurniture By Own Arrangement). 87 Material & Labour For Treatment Of Sunken Floor Slab Comprising Of The Following Specifications With And Including Demolition Of Sunken Floors Complete All As Specified And Directed:-(I) Cleaning The Sunken/Lowered Portion Of Rcc Slab Surface (Including Vertical Total Depth Plus Skirting Height) Of Floors By Wire Brush, Chisel Out Any Mortar Sticking To The Surface And Brooming Completely. Provision Of 40Mm Thick Avg Pcc 1:2:4 Type B-0 Using 12.5Mm Graded Aggregate As In Padding Concrete To Achieve Proper Slope Including Cutting Holes In Bricks Or Rcc Wall For Spout.(Ii) Rendering Of Uneven Surfaces With 6Mm Thick Cm 1:4 Mixed With And Including Integral Water Proofing Compound Sika Plastocreat Plus Or Equivalent Make In Fosroc / Thremax As Approved By Ge @ 0.2% By Wt Of Cement Consumed Including Filling It With Water To Check Dampness And Seepage And Where Dampness / Seepage Is Noticed, Nozzles Shall Be Fixed And Grouting Carried Out. (Iii) All Junctions Points Of Side Wall Where Ci/Gi/Pvc Pipes Are Passing Through Shall Be Sealed With Epoxy Putty Sikaguard 694 F(I) Or Equivalent Make In Fosroc / Thremax As Approved By Ge.(Iv) After Drying Putty, Wash The Slab And Sides Of Sunken Portion With Water And Make It Clear And Clean.(V) Applying Two Coats Of Polymer Modified Cementious Water Proof Coating With Sika Topseal 107 Or Or Equivalent Make In Fosroc / Thremax As Approved By Ge In Two Coats @ 3Kg/Sqm To Sanwiched With Glass Fibre Reinforcemnt: Sika Fab-1 Or Or Equivalent Make In Fosroc / Thremax As Approved By Ge Over Base Coat As Per MnaufacturerS Instruction To Bottom And Vertical Sides Up To Finished Floor Level+100Mm Height. The Thickness Of Two Layer Shall Be 1Mm. When The Second Layer Is Still Sticky, Coarse Sand Spray Shall Be Carried For The Vertical And Bottom Surface Of The Sunken Portion.(Vi) Plaster The Bottom And Sides Up To Bottom Of The Skirting With Minimum 20Mm Thick Cm 1:4 Mixed With Integral Water Proofing Compound Sika Plastocreat Plus Or Equivalent Make In Fosroc / Thremax As Approved By Ge @ 0.2% By Wt Of Cement Consumed As Per ManufacturerS Specification Including Rounding Of Corners And Injuctions Sloping Towards Spout. (Vii) All Pipes Laid In Sunken Portion Shall Be Covered With 50Mm Thick Pcc 1:3:6 All Round After Painting With Anticorrosive Paint . (Viii) The Sunken Floor Shall Be Filled With Lean Concrete 1:7:12. Note :- Test The Water Proofed Area (Ponding Test) By Filling Water For At Least 72 Hours And Tested For Leakage Seepage And To The Entire Satisfaction Of Ge. Test Record For Each Sunken Slab Shall Be Maintained. The Treatment Shall Be Carried Out By Authorised Applicators Of Chemicals. Cost Of Testing And All Material & Labour Is Inclued In The Rates Quoted Above. 88 Material & Labour For Complete Removal Of Existing Treatment By Washing Down And Smoothing Old Surface Of Walls Including Scrapping And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Over Layer Of Smooth Putty Finish Two Coats As Per Manufacture Instruction With Smooth Roller Finish, Complete All As Specified And Directed By Engineer In Charge.(Note- After Painting ,Cleaning Of All Floors,Glass & Furniture By Own Arrangement). 89 Material & Labour For Preparing Surfaces Plastered Or Unplastered Old Surface Of Ceiling Applying One Coat Of Oil Bound Distemper As Per Manufacture Instruction With Smooth Roller Finish, Complete All As Specified And Directed By Engineer In Charge. (Note- After Painting Cleaning Of All Floors, Glass & Furniture By Own Arrangement). 90 Material & Labour For Preparation Of Old Decorated Surfaces Of Walls By Scrapping Old Paint With Steel Wire Brush, Wash The Surface Throughly And Applying One Coats Of Acrylic Emulsion Exterior Grade After Filling All Indulation/ Crack With Wall Care Putty Including Necessary Steel Scaffolding + Green Cloth All Round The Work Side For Any Position/Height, Complete All As Specified And As Directed. (For Bldg Upto Gf To Four Floor). Note :-Necessary Safety Precautions Need To Be Taken By Contractor Before Applying Paint. 91 Material & Labour For Preparation Of Old Painted Wood Or Wood Based Surfaces Of Any Description Exceeding 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Etc., Complete All As Specified And As Directed. 92 Material & Labour For Complete Removal Of Old Painted Wood Or Wood Based Surfaces Of Any Description Exceeding 10Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint Etc Over A Coat Of Pink Primer Complete All As Specified And As Directed 93 Material & Labour For Preparation Of Old Painted Steel Based Surfaces Of Any Description Exceeding 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Etc., Complete All As Specified And As Directed. 94 Material & Labour For Complete Removal Of Old Painted Steel Based Surfaces Of Any Description Exceeding 10Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc., Complete All As Specified And As Directed. 95 Taking Down Cement Plaster On Stone Wall Incl Racking Out Joints, Hackin For Key Scrubbing With Water Etc, Complete All As Specified And As Directed. 96 Material & Labour For Rendering 5Mm Thick On Ceiling Concrete Surfaces In Cement Mortar 1:3 And Even And Smooth Without Using Extra Cement., Complete All As Specified And As Directed 97 Material & Labour For Preparing Surfaces Plastered Or Unplastered New Surface Of Ceiling Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Two Coats As Per Manufacture Instruction With Smooth Roller Finish , Complete All As Specified And Directed. (Note After Painting, Cleaning Of All Floors, Glass & Furniture By Own Arrangement). 98 Material & Labour For 15Mm Thick Plastering In Cement & Sand Mortar 1:4 On Fair Faces Of Stone Work, Finished Even And Smooth (W/O Using Extra Cement), Including All Necessary Scaffolding Etc., Complete All As Specified And As Directed. 99 Material & Labour For Preparation Of New Plastered Surfaces Of Wall And Applying Two Coats Of 100 % Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Ltrs And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm All As Per The Manufacturer’S Instructions, Complete All As Specified And As Directed. 100 Material & Labour 15Mm Thick Rendering In Cm 1:6 To Stone Surfaces Trowelled To Even & Smooth W/O Using Extra Cement, Complete All As Specified And As Directed. 101 Material & Labour For Preparing Surfaces Plastered Or Unplastered New Surface Of Walls Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Over Layer Of Smooth Putty Finish As Per Manufacture Instruction With Smooth Roller Finish Complete All As Specified And Directed. (Note After Painting ,Cleaning Of All Floors, Glass & Furniture By Own Arrangement). 102 Supply Only Water Proofing Compound ,Complete All As Specified And Directed By Engineer In Charge. 103 Dismentaling/ Demolation Of Brick Work Or Stone Masonry In Cement Mortar Including All Quoins, Arches, Pillars, Etc Complete All As Specified And As Directed. 104 Material & Labour For Porbandar Stone Masonry, Well Bonded, Bedded And Solidly Hearted Built In Cm 1:6 All As Specified And As Directed. 105 Supply And Fixing In Repair Grating Doom 100Mm Dia Of Ptmt (Minimum Weight 25Gms) As Specified And As Directed. 106 Supply And Fixing In Repair Plastic Cover Lid Only For Pvc Water Storage Tank Of Capacity Exc 500 Ltrs But N Exc 750Ltrs, Isi Mark (Sample As Approved By Ge) Complete With Locking Arrangement With Or Without Hinges Complete All As Specified And As Directed. 107 Supply And Fixing In Repair Plastic Cover Lid Only For Pvc Water Storage Tank Of Capacity Exc 750 Ltrs But N Exc 1000 Ltrs , Isi Mark (Sample As Approved By Ge) Complete With Locking Arrangement With Or Without Hinges Complete All As Specified And As Directed. 108 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Laid, Bedded And Pointed In Any Mortar Etc Complete All As Specified And As Directed 109 Material & Labour For Granite (Of Any Type) 20 Mm Thick (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Including, Grinding, Polishing, Moulding The Edges And Polishing And Including Over Screed Bed 20 Mm Thick In Cement Mortar 1:6 Complete All As Specified And As Directed. 110 Material & Labour For Screed Bed 20 Mm Thick In Cement Mortar 1:6 Complete All As Specified And As Directed. 111 Material & Labour For 20 To 25Mm Thick Machine Cut Kota Stone ( Single Piece Of Required Size For Steps) Flooring Over Cement Screed Base Laid And Jointed With Grey Cement Slurrry Mixed With Pigments To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Complete All As Specified Over And Including 15Mm Thick Screed Bed In Cm 1:4 Complete Note:- Kota Stone In S /Case Should Be Provided In Single Piece Upto 1.5 M Length Or Aper Site Requirements Complete All As Specified And As Directed By Engineer-In-Charge. 112 Ditto - All As Above Item No 110 But Kota Stone Slab (100/150Mm X 550Mm) And 20-25Mm Thick In Riser Of Steps, Skirting , Dados And Pillar Laid Over And Including 10Mm Thick Rendering To Receive The Stone In Cement Mortar 1:3 And Jointed Complete Complete All As Specified And As Directed By Engineer-In-Charge. ( Note:- Kota Stone In S /Case Should Be Provided In Single Piece Upto 1.5 M Length ) 113 Supply And Fixing In Repair For Powder Coated Aluminium Anodised Frame (Minimum Thickness Of Powder Coating 50 Micron) For Door, Sliding Windows & Ventilators With One Or More Rebates Including Joining Cleats For Fixing Etc., Complete All As Specified And As Directed 114 Supply And Fixing In Repair For Powder Coated Anodised Aluminium Door Shutters, Aluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glazing Clips, Ruber Neoprene Packing, Handles 2 Nos In Each Door, Hinges, Anodised Aluminum Snap Beading Screws Etc., Complete All As Specified And As Directed. 115 Supply And Fixing In Repair For Anodised Aluminium Grill (Anodised Transparent Or Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac 15) Of Approved Design/Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass/ Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And As Direction. 116 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For Complete All As Specified And As Directed. 117 Material & Labour For Cement Concrete 1:3:6 Type C-2 Using 40Mm Graded Stone Aggregate In Foundations, Filling And Mass Concrete Including Sub Base Of Floors Complete All As Specified And As Directed. 118 Dismantling Of Trellis Work (Jafri), Including Taking As Under Of Battens Of Trellis Including Cutting Of Hedges And Pruning Of Trees (Posts And Rails Measured Separately) Complete All As Specified And As Directed. 119 Material & Labour For Providing Reinforced Cement Concrete Type B1 , 1:2:4 (20Mm Graded Aggregate) In Precast Post For Securing Rcc Jali Post Straining Or Terminal Post Struts Etc For Fencing Average Sectional Area Not Exc 100 Sq. Cm Height Up To 70Cm , With Or Without Chamfered Angles And Flat Splyed, Rounded Or Mitred Tops Complete All As Specified And As Directed. 120 Material & Labour For Pre Cast Rcc Jali 35Mm Thick In Pcc 1:2:4 Type B0 Using 12.5 Mm Graded Stone Aggregate Set And Jointed In Cm 1:4 Incl Dismentling Of Old Jali Complete All As Specified And As Directed By Engineer-In-Charge.

BOQ

Name of Work:- Comprehensive repair to B/R work at Dhar ur under GE (I) CG Porbandar
Sl. No. Item Description
1Schedule 'A'
2Taking down chowkhat with shutters (without taking of shutters from the frames) of any description n.exc 1.5 sqm in each panel complete all as specified and as directed.
3Taking down chowkhat with shutters (without taking of shutters from the frames) of any description exc 1.5 sqm but nexc 4 sqm in each panel complete all as specified and as directed.
4Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed.
5Supply and Fixing for 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
6Supply and Fixing for Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial faces veneers supplied and fixed to chowkhats complete all as specified and as directed.
7Supply and Fixing for 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and as directed.
8Supply and Fixing for 35 mm thick Flush Shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/ frame to match commercial type on both side complete all as specified and as directed.
9Supply and Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing as specified and as directed.
10S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
11Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described applying one coat of pink primer and applying two coat of synthetic enamel paint complete all as specified.
12Supply and Fixing for Mild steel, 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate complete fixed as directed.
13Supply and Fixing for 125 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 as specified and as directed.
14Supply and Fixing for 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised as specified and as directed.
15Supply and Fixing for 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
16Supply and Fixing 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy etc complete all as specified and as directed.
17Supply and Fixing Mild steel in repair 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate complete fixed as directed.
18Supply and Fixing in repair for 125 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 as specified and as directed.
19Supply and Fixing in repair for 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
20Supply and Fixing in repair for 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
21Supply and Fixing in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy etc complete all as specified and as directed.
22Supply and Fixing for Prelaminated partical board 18/19mm medium density ,prelaminated with Both side with one decorative choice lamination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board fixed in repair.(including wooden bedding 18-20mm wide With Complete fittings), complete all as specified and as directed.
23Supply and Fixing Hasp and staple for 100 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.
24Supply and Fixing in repair Hasp and staple for 100 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.
25Supply and Fixing 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.
26Supply and Fixing in repair 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.
27Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete, aluminium or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
28Supply and Fixing for 4 mm thick Figured glass, pin headed type and glazing with/ without oil putty in squares not exceeding 0.5 Sq. M in each pane in metal or aluminium window complete all as specified and as directed.
29S/F for staineless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium/pvc sections complete all as specified and as directed.
30Supply and Fixing in repair for staineless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium/pvc sections complete all as specified.
31Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.
32M & L for 10 mm thick vitrified tile of area exceeding n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick 1:6 complete all as specified and as directed.
33M & L 10 mm thick vitrified tile of area exceeding n.exc 0.36 sqm in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement plaster mortar 15 mm thick 1:4 CM, complete all as specified and as directed.
34Supply and Fixing for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile n exc 0.11 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match.
35Material & Labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm cement plaster in 1:4 CM, complete all as specified and as directed.
36Supply and Fixing, PVC Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed
37Taking down eaves gutter or RWP of any description Including fittings complete all as specified and as directed.
38Supply and Fixing for 110mm dia PVC rain water pipe of pressure single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified and as directed.
39Supply and Fixing for 110mm dia PVC band any radius as specified and as directed.
40Supply and Fixing for PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints laid in trenches completed all as directed.
41Supply and Fixing for PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints laid in trenches Completed all as directed.
42Supply and Fixing PVC (SWR) bends 110 mm bore with/without access door any radius complete all as directed.
43Supply and Fixing for PVC (SWR) bends 75mm bore with/without access door any radius complete all as directed.
44Supply and Fixing PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as directed.
45Supply and Fixing PVC (SWR) single junction 'T' 110mm bore with access door any radius complete all as directed.
46Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store.
47Taking up or down 20mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store.
48Supplying and laying for 16 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and as directed
49Supplying and laying for 20 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and as directed
50Supply and Fixing for Brass Elbow for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.
51Supply and Fixing for Brass Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.
52Supply and Fixingfor Male Brass threaded Adaptor Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.
53Supply and Fixing in repair 15 mm bib tap (fancy type) cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
54S/F in repairs brass CP shower rose 125mm size fancy type with swivel joint any size incl fixing to steel pipe/union for 15mm dia complete all as specified and as directed.
55Supply and Fixing in repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm (min. weight 210 gms) complete all as specified and as directed.
56Supply and Fixing in repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 15mm (min. weight 142 gms) as specified and as directed.
57Supply and Fixing in repair Pillar taps, 15mm dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe as specified and as directed.
58Supply and Fixing in repair PVC connection of 15mm dia length 600mm as specified and as directed.
59Supply & Fixing in repair Central Hole Basin Mixer with Popup waste system, complete all as specified and as directed.
60Supply and fixing Wall Mixer 2 in 1 with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges, complete all as specified and as directed.
61Supply and Fixing in repair (Syphon internal fitting) of PVC low level flushing cistern as per existing pattern to make the PVC low level flushing cistern fully functional complete all as specified & as directed.
62Supply and Fixing in repair (Syphon internal fitting) of single piece EWC flushing cistern as per existing pattern to make the flushing cistern fully functional complete all as specified & as directed.
63Supply and Fixing in repair mirror of size 762 mm x 1727 mm as selected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified & as directed.
64Dismantling water tanks of capacity of exc 500 liter but n exc 1000 Liters and removing to store ,complete all as specified and as directed.
65Supply and Fixing for 1000 Ltrs Capacity HDPE rotational moulded polyethylene water storage tanks minimum three layer, ISI marked (cylinder vertical with class top) hoisted and fixed in position complete all as specified & as directed.
66Supply and Fixing for 750 Ltrs. Capacity HDPE rotational moulded polyethylene water storage tanks minimum three layer, ISI marked (cylinder vertical with class top) hoisted and fixed in position all as specified and as directed.
67Supply and Fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and as directed.
68Supply and Fixing for in repairs 10 Ltrs. Capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets slimline or equivalen make / model with all accessories complete all as specified and as directed.
69Supply and Fixing for in repair Vitreous China ware wash hand basin white, oval type , size 550x400 mm size with cutting for and pinning ends of brackets or erecting stand including, chromium plated 15mm pillar cock, PVC connection 450 mm long, CP waste coupling, 32 mm dia PVC pipe complete all as specified and as directed.
70Supply and Fixing in repair for Bevelled edge mirror, 600mmx450mm of selected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified and as directed.
71Supply and Fixing for in repair 20mm Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
72Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.
73Supply and Fixing for in repair 15 mm bore stop valves/ Angle valve, cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
74Supply and Fixing in repair for 15 mm dia CP two way angle valve fixed in pipe complete all as specified and as directed
75Supply and Fixing in repair 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
76Supply and Fixing in repair Stop valves/Angle valves of size 15mm dia fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
77Supply and Fixing in repair 15mm bore brass spindle of best quality suitable for bib tap and stop cock to make the bib tap and stop cock fully functional complete all as specified and as directed.
78Supply and Fixing in repair 15mm bore rubber washer of best quality suitable for bib tap and stop cock all as specified and as directed.
79Supply and Fixing Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm as specified and as directed.
80Supply and Fixing in repair harrison rails stainless steel (Curtain rod/drapery rod), 20mm dia, fency type bracket 2 Nos of each opening and side stopper fency type required shape and size 2 Nos of each opening, complete all as specified and as directed.
81Supply and Fixing in repair Plate racks made out of 1mm thick .Stainless steel, of size 750x600x 250mm all as specified and directed (make of plate ot be used shall be SAIL, IINDAL, SURAJ or equivalent as approved by GE).
82Supply and Fixing in repair 32mm dia and 900mm long PVC waste pipe suitable for sink, WHB and urinal, complete all as specified and as directed.
83Supply & Fixing in repair waste coupling of 32mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts fanges end complete all as specified and as directed.
84Supply and Fixing in repair waste coupling of 40mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts fanges end complete all as specified and as directed.
85Supply & Fixing in repairs Plastic water closet seat, White/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.
86Material & Labour for preparartion of old surface of wall and applying one coats of oil bound distemper including filling undulation with wall care putty as per manufacture instruction with smooth roller finish ,complete all as specified and directed by Engineer in charge(Note after painting ,cleaning of all floors,glasSupply and Fixingurniture by own arrangement).
87Material & Labour for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed:-(i) Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout.(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seepage and where dampness / seepage is noticed, nozzles shall be fixed and grouting carried out. (iii) All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty Sikaguard 694 F(I) or equivalent make in Fosroc / Thremax as approved by GE.(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.(v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or or equivalent make in Fosroc / Thremax as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcemnt: Sika Fab-1 or or equivalent make in Fosroc / Thremax as approved by GE over base coat as per mnaufacturer's instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion.(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and injuctions sloping towards spout. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint . (viii) The sunken floor shall be filled with lean concrete 1:7:12. Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all Material & Labour is inclued in the rates quoted above.
88Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer in charge.(Note- after painting ,cleaning of all floors,glass & furniture by own arrangement).
89Material & Labour for preparing surfaces plastered or unplastered old surface of ceiling applying one coat of oil bound distemper as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer in charge. (Note- after painting cleaning of all floors, glass & furniture by own arrangement).
90Material & Labour for preparation of old decorated surfaces of walls by scrapping old paint with steel wire brush, wash the surface throughly and applying one coats of acrylic emulsion exterior grade after filling all indulation/ crack with wall care putty including necessary steel scaffolding + green cloth all round the work side for any position/height, complete all as specified and as directed. (For bldg upto GF to four Floor). Note :-Necessary safety precautions need to be taken by contractor before applying paint.
91Material & Labour for preparation of old painted wood or wood based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.
92Material & Labour for complete removal of old painted wood or wood based surfaces of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint etc over a coat of pink primer complete all as specified and as directed
93Material & Labour for Preparation of old painted steel based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.
94Material & Labour for complete removal of old painted steel based surfaces of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of Red oxide primer etc., complete all as specified and as directed.
95Taking down cement plaster on stone wall incl racking out joints, hackin for key scrubbing with water etc, complete all as specified and as directed.
96Material & Labour for rendering 5mm thick on ceiling concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement., complete all as specified and as directed
97Material & Labour for preparing surfaces plastered or unplastered new surface of ceiling applying two coats of oil bound distemper over a coat of primer two coats as per manufacture instruction with smooth roller finish , complete all as specified and directed. (Note after painting, cleaning of all floors, glass & furniture by own arrangement).
98Material & Labour for 15mm thick plastering in cement & sand mortar 1:4 on fair faces of stone work, finished even and smooth (w/o using extra cement), including all necessary scaffolding etc., complete all as specified and as directed.
99Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturer’s instructions, complete all as specified and as directed.
100Material & Labour 15mm thick rendering in CM 1:6 to stone surfaces trowelled to even & smooth w/o using extra cement, complete all as specified and as directed.
101Material & Labour for preparing surfaces plastered or unplastered new surface of walls applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish as per manufacture instruction with smooth roller finish complete all as specified and directed. (Note after painting ,cleaning of all floors, glass & furniture by own arrangement).
102Supply only water proofing compound ,complete all as specified and directed by Engineer in charge.
103Dismentaling/ Demolation of brick work or stone masonry in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.
104Material & Labour for Porbandar stone masonry, well bonded, bedded and solidly hearted built in CM 1:6 all as specified and as directed.
105Supply and Fixing in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) as specified and as directed.
106Supply and Fixing in repair Plastic cover lid only for PVC water storage tank of capacity exc 500 Ltrs but n exc 750Ltrs, ISI mark (sample as approved by GE) complete with locking arrangement with or without hinges complete all as specified and as directed.
107Supply and Fixing in repair Plastic cover lid only for PVC water storage tank of capacity exc 750 Ltrs but n exc 1000 Ltrs , ISI mark (sample as approved by GE) complete with locking arrangement with or without hinges complete all as specified and as directed.
108Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and as directed
109Material & Labour for granite (of any type) 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including, grinding, polishing, moulding the edges and polishing and including over screed bed 20 mm thick in cement mortar 1:6 complete all as specified and as directed.
110Material & Labour for screed bed 20 mm thick in cement mortar 1:6 complete all as specified and as directed.
111Material & Labour for 20 to 25mm thick machine cut Kota stone ( single piece of required size for steps) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified over and including 15mm thick screed bed in CM 1:4 complete Note:- Kota stone in S /case should be provided in single piece upto 1.5 m length or aper site requirements complete all as specified and as directed by Engineer-in-Charge.
112ditto - all as above Item No 110 but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete complete all as specified and as directed by Engineer-in-Charge. ( Note:- Kota stone in S /case should be provided in single piece upto 1.5 m length )
113Supply and Fixing in repair for powder coated Aluminium Anodised frame (minimum thickness of powder coating 50 micron) for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and as directed
114Supply and Fixing in repair for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed.
115Supply and Fixing in repair for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as direction.
116Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
117Material & Labour for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and as directed.
118Dismantling of Trellis work (jafri), including taking as under of battens of trellis including Cutting of hedges and pruning of trees (posts and rails measured separately) complete all as specified and as directed.
119Material & Labour for providing reinforced cement concrete type B1 , 1:2:4 (20mm graded aggregate) in precast post for securing RCC jali post straining or terminal post struts etc for fencing average sectional area not exc 100 sq. cm height up to 70cm , with or without chamfered angles and flat splyed, rounded or mitred tops complete all as specified and as directed.
120Material & Labour for pre cast RCC jali 35mm thick in PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate set and jointed in CM 1:4 incl dismentling of old jali complete all as specified and as directed by Engineer-in-Charge.
121Material & Labour for preparing of Old/New surfaces of walls ceiling washing the surface throughtly , filling the cracks ,Craves with crack filling compound as suggested by the manufacture and appyinf two coats of Rain coat manufactures and applying two coat of in other approved over a coat of primer .(shadeto match theexisting Paint), including necessary scaffolding for work ,complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56660189
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 20 Lakhs
LAST DATE 14-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Comprehensive Repair To B/R Work At Dhar Ur Under Ge (I) Cg Porbandar- 2 Taking Down Chowkhat With Shutters (Without Taking Of Shutters From The Frames) Of Any Description N.Exc 1.5 Sqm In Each Panel Complete All As Specified And As Directed. 3 Taking Down Chowkhat With Shutters (Without Taking Of Shutters From The Frames) Of Any Description Exc 1.5 Sqm But Nexc 4 Sqm In Each Panel Complete All As Specified And As Directed. 4 Taking Down Shutters Of Any Description Exc 1 Sqm And N.Exc 2 Sqm Each Complete All As Specified And As Directed. 5 Supply And Fixing For 2Nd Class Hw Plain Chowkhats And Framed, Rebated On The Solid Rounded Or Chamfered Put Together With Glue Pinned At Joints Complete All As Specified And As Directed. 6 Supply And Fixing For Second Class Hard Wood Plain, Framed, Panelled Shutters 35Mm Thick, (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density Wood Particle Board With Commercial Faces Veneers Supplied And Fixed To Chowkhats Complete All As Specified And As Directed. 7 Supply And Fixing For 35 Mm Thick Second Class Hard Wood Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc., Divided Into Squares, With Plain, Chamfered Or Rounded, Mitred And Rebated Sash Bars, Any Numbers, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut Mitred Beads For Securing Glass Etc. As Specified In Ssr Part I, Section 8, Clause 8.20 (A) Complete All As Specified And As Directed. 8 Supply And Fixing For 35 Mm Thick Flush Shutter, Solid Core Construction, With Block Board Core And Plywood Face Panels, Both Face Is Covered With Decorative Face Veneer With Lipping/ Frame To Match Commercial Type On Both Side Complete All As Specified And As Directed. 9 Supply And Fixing Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing As Specified And As Directed. 10 S & F For Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C’ Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail, Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing. 11 Preparation Of New Or Previously Treated Wood Surfaces Of Any Description, Over 10 Cm Width Or Girth, Not Otherwise Described Applying One Coat Of Pink Primer And Applying Two Coat Of Synthetic Enamel Paint Complete All As Specified. 12 Supply And Fixing For Mild Steel, 300Mm, Brass Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete Fixed As Directed. 13 Supply And Fixing For 125 Mm Long Butt Hinges, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised And Fixed, Type B-22 As Specified And As Directed. 14 Supply And Fixing For 150 Mm Long Extruded Aluminium Alloy Handles, Fabricated Type, Anodised As Specified And As Directed. 15 Supply And Fixing For 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And As Directed. 16 Supply And Fixing 300 Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy Etc Complete All As Specified And As Directed. 17 Supply And Fixing Mild Steel In Repair 300Mm, Brass Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete Fixed As Directed. 18 Supply And Fixing In Repair For 125 Mm Long Butt Hinges, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised And Fixed, Type B-22 As Specified And As Directed. 19 Supply And Fixing In Repair For 150 Mm Long Extruded Aluminium Alloy Handles, Fabricated Type, Anodised Complete All As Specified And As Directed. 20 Supply And Fixing In Repair For 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And As Directed. 21 Supply And Fixing In Repair 300 Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy Etc Complete All As Specified And As Directed. 22 Supply And Fixing For Prelaminated Partical Board 18/19Mm Medium Density ,Prelaminated With Both Side With One Decorative Choice Lamination And Other Side Balancing With White Lamination Fixed With Screws As In Shelves To Kitchen Almirah And Cub Board Fixed In Repair.(Including Wooden Bedding 18-20Mm Wide With Complete Fittings), Complete All As Specified And As Directed. 23 Supply And Fixing Hasp And Staple For 100 Mm, Safety Type, Aluminium Anodised With Mild Steel Hinge Pin Including Bolt To Hinge Plate And Fixed With Screws, Complete All As Specified And As Directed. 24 Supply And Fixing In Repair Hasp And Staple For 100 Mm, Safety Type, Aluminium Anodised With Mild Steel Hinge Pin Including Bolt To Hinge Plate And Fixed With Screws, Complete All As Specified And As Directed. 25 Supply And Fixing 140Mm Long Aluminium Anodized Floor Door Stopper Double Legged With Rubber Shoe, Fixed To Bottom Rail Of Door Complete All As Specified And Directed. 26 Supply And Fixing In Repair 140Mm Long Aluminium Anodized Floor Door Stopper Double Legged With Rubber Shoe, Fixed To Bottom Rail Of Door Complete All As Specified And Directed. 27 Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden Frames Or Stone, Concrete, Aluminium Or Brick Surrounds, Glazed With Putty Or Fixed With Beads Complete All As Specified And As Directed. 28 Supply And Fixing For 4 Mm Thick Figured Glass, Pin Headed Type And Glazing With/ Without Oil Putty In Squares Not Exceeding 0.5 Sq. M In Each Pane In Metal Or Aluminium Window Complete All As Specified And As Directed. 29 S/F For Staineless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Aluminium/Pvc Sections Complete All As Specified And As Directed. 30 Supply And Fixing In Repair For Staineless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Aluminium/Pvc Sections Complete All As Specified. 31 Dismantling, Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And As Directed. 32 M & L For 10 Mm Thick Vitrified Tile Of Area Exceeding N.Exc 0.36 Sqm In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick 1:6 Complete All As Specified And As Directed. 33 M & L 10 Mm Thick Vitrified Tile Of Area Exceeding N.Exc 0.36 Sqm In Vertical Surfaces Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including Cement Plaster Mortar 15 Mm Thick 1:4 Cm, Complete All As Specified And As Directed. 34 Supply And Fixing For Non Skid Ceramic Coloured Tiles 7 To 8 Mm Thick (Square/Rectangular) Area Of Each Tile N Exc 0.11 Sqm In Floors, Over And Including 15Mm Thick Screed In Cm (1:4) Set And Jointed In Neat Cement Slurry And Pointed With White Or Coloured Cement To Match. 35 Material & Labour For Glazed Ceramic Tiles In Vertical Surface 350X 250X 7 Mm/ 450X 300X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match And Including 15Mm Cement Plaster In 1:4 Cm, Complete All As Specified And As Directed. 36 Supply And Fixing, Pvc Floor Trap 75Mm Bore With Grating Incl Jointing Using Solvent Cement To Waste Pipe Fixed In Cement Concrete Type B1 (1:2:4) Complete All As Directed 37 Taking Down Eaves Gutter Or Rwp Of Any Description Including Fittings Complete All As Specified And As Directed. 38 Supply And Fixing For 110Mm Dia Pvc Rain Water Pipe Of Pressure Single Socketed With Rubber Joint, Jointed With Solvent Joint Fixed To Wall Complete All As Specified And As Directed. 39 Supply And Fixing For 110Mm Dia Pvc Band Any Radius As Specified And As Directed. 40 Supply And Fixing For Pvc (Swr) Pipes 110 Mm Bore Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Completed All As Directed. 41 Supply And Fixing For Pvc (Swr) Pipes75 Mm Bore Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Completed All As Directed. 42 Supply And Fixing Pvc (Swr) Bends 110 Mm Bore With/Without Access Door Any Radius Complete All As Directed. 43 Supply And Fixing For Pvc (Swr) Bends 75Mm Bore With/Without Access Door Any Radius Complete All As Directed. 44 Supply And Fixing Pvc (Swr) Single Junction T 75 Mm Bore With Access Door Any Radius Complete All As Directed. 45 Supply And Fixing Pvc (Swr) Single Junction T 110Mm Bore With Access Door Any Radius Complete All As Directed. 46 Taking Up Or Down 15Mm Bore Dia, Steel Tubing & Connections Incl Cleaning For Refixing Or Removal To Store. 47 Taking Up Or Down 20Mm Bore Dia, Steel Tubing & Connections Incl Cleaning For Refixing Or Removal To Store. 48 Supplying And Laying For 16 Mm Dia Cpvc Pipes Sdr 11 & Fittings On Walls/Ceilings Or Laying In Floors Complete All As Specified And As Directed 49 Supplying And Laying For 20 Mm Dia Cpvc Pipes Sdr 11 & Fittings On Walls/Ceilings Or Laying In Floors Complete All As Specified And As Directed 50 Supply And Fixing For Brass Elbow For Special Fitting Of 16 Mm Bore Cpvc Pipe Complete All As Specified And Directed. 51 Supply And Fixing For Brass Tee For Special Fitting Of 16 Mm Bore Cpvc Pipe Complete All As Specified And Directed. 52 Supply And Fixingfor Male Brass Threaded Adaptor Tee For Special Fitting Of 16 Mm Bore Cpvc Pipe Complete All As Specified And Directed. 53 Supply And Fixing In Repair 15 Mm Bib Tap (Fancy Type) Cast Copper Alloy Chromium Plated With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed. 54 S/F In Repairs Brass Cp Shower Rose 125Mm Size Fancy Type With Swivel Joint Any Size Incl Fixing To Steel Pipe/Union For 15Mm Dia Complete All As Specified And As Directed. 55 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of 20Mm (Min. Weight 210 Gms) Complete All As Specified And As Directed. 56 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of 15Mm (Min. Weight 142 Gms) As Specified And As Directed. 57 Supply And Fixing In Repair Pillar Taps, 15Mm Dia, Fancy Type, Cast Copper Alloy With Capstan Heads, Chromium Plated, Screwed Down High Pressure, Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe As Specified And As Directed. 58 Supply And Fixing In Repair Pvc Connection Of 15Mm Dia Length 600Mm As Specified And As Directed. 59 Supply & Fixing In Repair Central Hole Basin Mixer With Popup Waste System, Complete All As Specified And As Directed. 60 Supply And Fixing Wall Mixer 2 In 1 With Provision For Overhead Shower With 115Mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges, Complete All As Specified And As Directed. 61 Supply And Fixing In Repair (Syphon Internal Fitting) Of Pvc Low Level Flushing Cistern As Per Existing Pattern To Make The Pvc Low Level Flushing Cistern Fully Functional Complete All As Specified & As Directed. 62 Supply And Fixing In Repair (Syphon Internal Fitting) Of Single Piece Ewc Flushing Cistern As Per Existing Pattern To Make The Flushing Cistern Fully Functional Complete All As Specified & As Directed. 63 Supply And Fixing In Repair Mirror Of Size 762 Mm X 1727 Mm As Selected Quality Glass, Mounted On 6 Mm Thick Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Fixed In Repairs Complete All As Specified & As Directed. 64 Dismantling Water Tanks Of Capacity Of Exc 500 Liter But N Exc 1000 Liters And Removing To Store ,Complete All As Specified And As Directed. 65 Supply And Fixing For 1000 Ltrs Capacity Hdpe Rotational Moulded Polyethylene Water Storage Tanks Minimum Three Layer, Isi Marked (Cylinder Vertical With Class Top) Hoisted And Fixed In Position Complete All As Specified & As Directed. 66 Supply And Fixing For 750 Ltrs. Capacity Hdpe Rotational Moulded Polyethylene Water Storage Tanks Minimum Three Layer, Isi Marked (Cylinder Vertical With Class Top) Hoisted And Fixed In Position All As Specified And As Directed. 67 Supply And Fixing In Repair Vitreous China Wash Down Water Closet Pan (Pedestal Pattern), White With P Or S Trap With And Including Plastic Water Closet Seat Cover, Connection To Trap, Flushing Pipe & Anti -Syphonage Pipe Etc Including Necessary Materials For Fittings & Making Good To Floor Complete All As Specified And As Directed. 68 Supply And Fixing For In Repairs 10 Ltrs. Capacity Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets Slimline Or Equivalen Make / Model With All Accessories Complete All As Specified And As Directed. 69 Supply And Fixing For In Repair Vitreous China Ware Wash Hand Basin White, Oval Type , Size 550X400 Mm Size With Cutting For And Pinning Ends Of Brackets Or Erecting Stand Including, Chromium Plated 15Mm Pillar Cock, Pvc Connection 450 Mm Long, Cp Waste Coupling, 32 Mm Dia Pvc Pipe Complete All As Specified And As Directed. 70 Supply And Fixing In Repair For Bevelled Edge Mirror, 600Mmx450Mm Of Selected Quality Glass, Mounted On 6 Mm Thick Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Fixed In Repairs Complete All As Specified And As Directed. 71 Supply And Fixing For In Repair 20Mm Aluminium Anodised Tubular Towel Rail, 20Mm Dia, D Type, 60Cm Long Between Flanges Complete All As Specified And As Directed. 72 Supply And Fixing In Repairs Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position, Complete All As Specified And As Directed. 73 Supply And Fixing For In Repair 15 Mm Bore Stop Valves/ Angle Valve, Cast Copper Alloy Fancy Type Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends For Iron Pipe Or For Unions Complete All As Specified And As Directed. 74 Supply And Fixing In Repair For 15 Mm Dia Cp Two Way Angle Valve Fixed In Pipe Complete All As Specified And As Directed 75 Supply And Fixing In Repair 20 Mm Dia Stop Valves / Gate Valve, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed Complete All As Specified And As Directed. 76 Supply And Fixing In Repair Stop Valves/Angle Valves Of Size 15Mm Dia Fancy Type, Chromium Plated With Long Shank And Cup (Concealed Type), Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed Complete All As Specified And As Directed. 77 Supply And Fixing In Repair 15Mm Bore Brass Spindle Of Best Quality Suitable For Bib Tap And Stop Cock To Make The Bib Tap And Stop Cock Fully Functional Complete All As Specified And As Directed. 78 Supply And Fixing In Repair 15Mm Bore Rubber Washer Of Best Quality Suitable For Bib Tap And Stop Cock All As Specified And As Directed. 79 Supply And Fixing Sinks With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboutery With Plugs, Washers And Wastes Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915 Mm X 460Mm Bowl Size 410 Mm 330 Mm X 160Mm As Specified And As Directed. 80 Supply And Fixing In Repair Harrison Rails Stainless Steel (Curtain Rod/Drapery Rod), 20Mm Dia, Fency Type Bracket 2 Nos Of Each Opening And Side Stopper Fency Type Required Shape And Size 2 Nos Of Each Opening, Complete All As Specified And As Directed. 81 Supply And Fixing In Repair Plate Racks Made Out Of 1Mm Thick .Stainless Steel, Of Size 750X600X 250Mm All As Specified And Directed (Make Of Plate Ot Be Used Shall Be Sail, Iindal, Suraj Or Equivalent As Approved By Ge). 82 Supply And Fixing In Repair 32Mm Dia And 900Mm Long Pvc Waste Pipe Suitable For Sink, Whb And Urinal, Complete All As Specified And As Directed. 83 Supply & Fixing In Repair Waste Coupling Of 32Mm Dia Brass Cp For Glazed Ware Sink Basins, Etc With Long Screwed Shanks And Fly Nuts Fanges End Complete All As Specified And As Directed. 84 Supply And Fixing In Repair Waste Coupling Of 40Mm Dia Brass Cp For Glazed Ware Sink Basins, Etc With Long Screwed Shanks And Fly Nuts Fanges End Complete All As Specified And As Directed. 85 Supply & Fixing In Repairs Plastic Water Closet Seat, White/Black, Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device, Complete All As Specified And As Directed. 86 Material & Labour For Preparartion Of Old Surface Of Wall And Applying One Coats Of Oil Bound Distemper Including Filling Undulation With Wall Care Putty As Per Manufacture Instruction With Smooth Roller Finish ,Complete All As Specified And Directed By Engineer In Charge(Note After Painting ,Cleaning Of All Floors,Glassupply And Fixingurniture By Own Arrangement). 87 Material & Labour For Treatment Of Sunken Floor Slab Comprising Of The Following Specifications With And Including Demolition Of Sunken Floors Complete All As Specified And Directed:-(I) Cleaning The Sunken/Lowered Portion Of Rcc Slab Surface (Including Vertical Total Depth Plus Skirting Height) Of Floors By Wire Brush, Chisel Out Any Mortar Sticking To The Surface And Brooming Completely. Provision Of 40Mm Thick Avg Pcc 1:2:4 Type B-0 Using 12.5Mm Graded Aggregate As In Padding Concrete To Achieve Proper Slope Including Cutting Holes In Bricks Or Rcc Wall For Spout.(Ii) Rendering Of Uneven Surfaces With 6Mm Thick Cm 1:4 Mixed With And Including Integral Water Proofing Compound Sika Plastocreat Plus Or Equivalent Make In Fosroc / Thremax As Approved By Ge @ 0.2% By Wt Of Cement Consumed Including Filling It With Water To Check Dampness And Seepage And Where Dampness / Seepage Is Noticed, Nozzles Shall Be Fixed And Grouting Carried Out. (Iii) All Junctions Points Of Side Wall Where Ci/Gi/Pvc Pipes Are Passing Through Shall Be Sealed With Epoxy Putty Sikaguard 694 F(I) Or Equivalent Make In Fosroc / Thremax As Approved By Ge.(Iv) After Drying Putty, Wash The Slab And Sides Of Sunken Portion With Water And Make It Clear And Clean.(V) Applying Two Coats Of Polymer Modified Cementious Water Proof Coating With Sika Topseal 107 Or Or Equivalent Make In Fosroc / Thremax As Approved By Ge In Two Coats @ 3Kg/Sqm To Sanwiched With Glass Fibre Reinforcemnt: Sika Fab-1 Or Or Equivalent Make In Fosroc / Thremax As Approved By Ge Over Base Coat As Per MnaufacturerS Instruction To Bottom And Vertical Sides Up To Finished Floor Level+100Mm Height. The Thickness Of Two Layer Shall Be 1Mm. When The Second Layer Is Still Sticky, Coarse Sand Spray Shall Be Carried For The Vertical And Bottom Surface Of The Sunken Portion.(Vi) Plaster The Bottom And Sides Up To Bottom Of The Skirting With Minimum 20Mm Thick Cm 1:4 Mixed With Integral Water Proofing Compound Sika Plastocreat Plus Or Equivalent Make In Fosroc / Thremax As Approved By Ge @ 0.2% By Wt Of Cement Consumed As Per ManufacturerS Specification Including Rounding Of Corners And Injuctions Sloping Towards Spout. (Vii) All Pipes Laid In Sunken Portion Shall Be Covered With 50Mm Thick Pcc 1:3:6 All Round After Painting With Anticorrosive Paint . (Viii) The Sunken Floor Shall Be Filled With Lean Concrete 1:7:12. Note :- Test The Water Proofed Area (Ponding Test) By Filling Water For At Least 72 Hours And Tested For Leakage Seepage And To The Entire Satisfaction Of Ge. Test Record For Each Sunken Slab Shall Be Maintained. The Treatment Shall Be Carried Out By Authorised Applicators Of Chemicals. Cost Of Testing And All Material & Labour Is Inclued In The Rates Quoted Above. 88 Material & Labour For Complete Removal Of Existing Treatment By Washing Down And Smoothing Old Surface Of Walls Including Scrapping And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Over Layer Of Smooth Putty Finish Two Coats As Per Manufacture Instruction With Smooth Roller Finish, Complete All As Specified And Directed By Engineer In Charge.(Note- After Painting ,Cleaning Of All Floors,Glass & Furniture By Own Arrangement). 89 Material & Labour For Preparing Surfaces Plastered Or Unplastered Old Surface Of Ceiling Applying One Coat Of Oil Bound Distemper As Per Manufacture Instruction With Smooth Roller Finish, Complete All As Specified And Directed By Engineer In Charge. (Note- After Painting Cleaning Of All Floors, Glass & Furniture By Own Arrangement). 90 Material & Labour For Preparation Of Old Decorated Surfaces Of Walls By Scrapping Old Paint With Steel Wire Brush, Wash The Surface Throughly And Applying One Coats Of Acrylic Emulsion Exterior Grade After Filling All Indulation/ Crack With Wall Care Putty Including Necessary Steel Scaffolding + Green Cloth All Round The Work Side For Any Position/Height, Complete All As Specified And As Directed. (For Bldg Upto Gf To Four Floor). Note :-Necessary Safety Precautions Need To Be Taken By Contractor Before Applying Paint. 91 Material & Labour For Preparation Of Old Painted Wood Or Wood Based Surfaces Of Any Description Exceeding 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Etc., Complete All As Specified And As Directed. 92 Material & Labour For Complete Removal Of Old Painted Wood Or Wood Based Surfaces Of Any Description Exceeding 10Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint Etc Over A Coat Of Pink Primer Complete All As Specified And As Directed 93 Material & Labour For Preparation Of Old Painted Steel Based Surfaces Of Any Description Exceeding 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Etc., Complete All As Specified And As Directed. 94 Material & Labour For Complete Removal Of Old Painted Steel Based Surfaces Of Any Description Exceeding 10Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc., Complete All As Specified And As Directed. 95 Taking Down Cement Plaster On Stone Wall Incl Racking Out Joints, Hackin For Key Scrubbing With Water Etc, Complete All As Specified And As Directed. 96 Material & Labour For Rendering 5Mm Thick On Ceiling Concrete Surfaces In Cement Mortar 1:3 And Even And Smooth Without Using Extra Cement., Complete All As Specified And As Directed 97 Material & Labour For Preparing Surfaces Plastered Or Unplastered New Surface Of Ceiling Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Two Coats As Per Manufacture Instruction With Smooth Roller Finish , Complete All As Specified And Directed. (Note After Painting, Cleaning Of All Floors, Glass & Furniture By Own Arrangement). 98 Material & Labour For 15Mm Thick Plastering In Cement & Sand Mortar 1:4 On Fair Faces Of Stone Work, Finished Even And Smooth (W/O Using Extra Cement), Including All Necessary Scaffolding Etc., Complete All As Specified And As Directed. 99 Material & Labour For Preparation Of New Plastered Surfaces Of Wall And Applying Two Coats Of 100 % Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Ltrs And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm All As Per The Manufacturer’S Instructions, Complete All As Specified And As Directed. 100 Material & Labour 15Mm Thick Rendering In Cm 1:6 To Stone Surfaces Trowelled To Even & Smooth W/O Using Extra Cement, Complete All As Specified And As Directed. 101 Material & Labour For Preparing Surfaces Plastered Or Unplastered New Surface Of Walls Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Over Layer Of Smooth Putty Finish As Per Manufacture Instruction With Smooth Roller Finish Complete All As Specified And Directed. (Note After Painting ,Cleaning Of All Floors, Glass & Furniture By Own Arrangement). 102 Supply Only Water Proofing Compound ,Complete All As Specified And Directed By Engineer In Charge. 103 Dismentaling/ Demolation Of Brick Work Or Stone Masonry In Cement Mortar Including All Quoins, Arches, Pillars, Etc Complete All As Specified And As Directed. 104 Material & Labour For Porbandar Stone Masonry, Well Bonded, Bedded And Solidly Hearted Built In Cm 1:6 All As Specified And As Directed. 105 Supply And Fixing In Repair Grating Doom 100Mm Dia Of Ptmt (Minimum Weight 25Gms) As Specified And As Directed. 106 Supply And Fixing In Repair Plastic Cover Lid Only For Pvc Water Storage Tank Of Capacity Exc 500 Ltrs But N Exc 750Ltrs, Isi Mark (Sample As Approved By Ge) Complete With Locking Arrangement With Or Without Hinges Complete All As Specified And As Directed. 107 Supply And Fixing In Repair Plastic Cover Lid Only For Pvc Water Storage Tank Of Capacity Exc 750 Ltrs But N Exc 1000 Ltrs , Isi Mark (Sample As Approved By Ge) Complete With Locking Arrangement With Or Without Hinges Complete All As Specified And As Directed. 108 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Laid, Bedded And Pointed In Any Mortar Etc Complete All As Specified And As Directed 109 Material & Labour For Granite (Of Any Type) 20 Mm Thick (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Including, Grinding, Polishing, Moulding The Edges And Polishing And Including Over Screed Bed 20 Mm Thick In Cement Mortar 1:6 Complete All As Specified And As Directed. 110 Material & Labour For Screed Bed 20 Mm Thick In Cement Mortar 1:6 Complete All As Specified And As Directed. 111 Material & Labour For 20 To 25Mm Thick Machine Cut Kota Stone ( Single Piece Of Required Size For Steps) Flooring Over Cement Screed Base Laid And Jointed With Grey Cement Slurrry Mixed With Pigments To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Complete All As Specified Over And Including 15Mm Thick Screed Bed In Cm 1:4 Complete Note:- Kota Stone In S /Case Should Be Provided In Single Piece Upto 1.5 M Length Or Aper Site Requirements Complete All As Specified And As Directed By Engineer-In-Charge. 112 Ditto - All As Above Item No 110 But Kota Stone Slab (100/150Mm X 550Mm) And 20-25Mm Thick In Riser Of Steps, Skirting , Dados And Pillar Laid Over And Including 10Mm Thick Rendering To Receive The Stone In Cement Mortar 1:3 And Jointed Complete Complete All As Specified And As Directed By Engineer-In-Charge. ( Note:- Kota Stone In S /Case Should Be Provided In Single Piece Upto 1.5 M Length ) 113 Supply And Fixing In Repair For Powder Coated Aluminium Anodised Frame (Minimum Thickness Of Powder Coating 50 Micron) For Door, Sliding Windows & Ventilators With One Or More Rebates Including Joining Cleats For Fixing Etc., Complete All As Specified And As Directed 114 Supply And Fixing In Repair For Powder Coated Anodised Aluminium Door Shutters, Aluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glazing Clips, Ruber Neoprene Packing, Handles 2 Nos In Each Door, Hinges, Anodised Aluminum Snap Beading Screws Etc., Complete All As Specified And As Directed. 115 Supply And Fixing In Repair For Anodised Aluminium Grill (Anodised Transparent Or Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac 15) Of Approved Design/Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass/ Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And As Direction. 116 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For Complete All As Specified And As Directed. 117 Material & Labour For Cement Concrete 1:3:6 Type C-2 Using 40Mm Graded Stone Aggregate In Foundations, Filling And Mass Concrete Including Sub Base Of Floors Complete All As Specified And As Directed. 118 Dismantling Of Trellis Work (Jafri), Including Taking As Under Of Battens Of Trellis Including Cutting Of Hedges And Pruning Of Trees (Posts And Rails Measured Separately) Complete All As Specified And As Directed. 119 Material & Labour For Providing Reinforced Cement Concrete Type B1 , 1:2:4 (20Mm Graded Aggregate) In Precast Post For Securing Rcc Jali Post Straining Or Terminal Post Struts Etc For Fencing Average Sectional Area Not Exc 100 Sq. Cm Height Up To 70Cm , With Or Without Chamfered Angles And Flat Splyed, Rounded Or Mitred Tops Complete All As Specified And As Directed. 120 Material & Labour For Pre Cast Rcc Jali 35Mm Thick In Pcc 1:2:4 Type B0 Using 12.5 Mm Graded Stone Aggregate Set And Jointed In Cm 1:4 Incl Dismentling Of Old Jali Complete All As Specified And As Directed By Engineer-In-Charge.
Basic Detail
Tender No 8218A/E8
Bidding Type Tender
Location
City Porbandar
State Gujarat
Key Dates
Publish Date 24 Jul 2026
Submission Date 14 Aug 2026
Open Date 17 Aug 2026
Finance
Tender Value 20 Lakhs
Tender Fee 500
EMD 40000
Exemption Available
Document List
119007d6-55cc-4959-a78a-f6466fbb98f8.html
8218AT.pdf
BOQ_874199.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Aug 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

119007d6-55cc-4959-a78a-f6466fbb98f8.html

pdf

8218AT.pdf

xls

BOQ_874199.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders