Tender For Provision Of Certain Sanctioned Works Under Age E/M Of Ge Satwari
Tender Overview
Project Description
Tender For Provision Of Certain Sanctioned Works Under Age E/M Of Ge Satwari- 1 Excavation In Trenches In Any Type Of Soil, Not Exceeding 1.5M Deep And 1.5M Wide For Foundation Etc Or Manholes, Piers , Shafts Etc Not Exceeding 10 Sqm On Plan & Not Exceeding 1.5M In Depth And Getting Out Complete All As Specified And Directed. 2 Returning , Filling In, Including Spreading, Leveling, Watering And Well Ramming In Layers Not Exc 25 Cm Complete All As Specified And Directed 3 Removing Excavated Material To A Distance N.Exc 50M & Depositing Where Directed At A Level N. Exc 1.5 M Above The Starting Point Complete All As Specified And Directed. 4 M&L For Sand Cushioning With A Layer Of Dry River Sand, 80Mm Thick Before Laying Of Cable And 150Mm Thick (Punned Down To 100Mm Thick) After Laying Of Cables, In Trenches/Ducts, Complete All As Specified And Directed. Note : Punned Down Thickness (Overall 18Cm), Shall Be Considered For Measurement And Payment. 5 M&L For Factory Made Unreinforced Precast Concrete Cable Cover Lv Type-1, Flat, Of Size 250X150X40Mm, Laid Flat And Dry In Trenches Over The Cable For Protection, Length Perpendicular To The Direction Of Cable Adjacent To Each Other, Complete All As Specified And Directed. 6 Supply & Erecting In Truly Vertical Position Steel Tubular Swaged Poles, Type 410 Sp-31(9.00 Meters Long) Complete With Cast Iron Base Plate, Finial Taper Plug, Bolts, Nuts & Screws, Including Marking Pole Numbers In A 15 Cm Dia Yellow Circle With Number Writting With Black Synenthic Paint/ Stricker Including Painting Strips In Alternate From Bottom To Top With Three Strips Of White Synthetic Enamel Paint & Two Strips Of Yellow/ Black Paint Throughout The Circumference Of Pole Including One Coat Of Lime Wash On Pcc Copping Of Pole Complete All As Specified And Directed.. 7 M&L For Plain Cement Concrete 1:4:8, Type D2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Foundation, Filling And Mass Concrete Complete All As Specified And Directed . 8 M&L For Plain Cement Concrete1:2:4, Type B-1 (Using 20 Mm Graded Crushed Stone Aggregates) As In Coping Of Poles,Stay Assembly, Plate Form Of Transformer Etc Including Weathering, Slightly Rounded Or Chamfered Angle And Throating, Necessary Form Work And Fair Finishing All Exposed Faces Of Concrete Without Using Extra Cement Complete All As Specified And Directed 9 Supply, Laying, Jointing, Testing And Commissioning Of Low Tension (Lt) Xlpe Insulated, Armoured, Heavy Duty, Electric Power Cable, Cross Sectional Area 16 Sqmm, 4 Core, Aluminum Conductor, 1100 Volts Grade Under Ground Cable Including Both Side Connection With Lugs/Thimbles Of Suitable Size Etc, Laid In Trenches, Along Poles Or Passing Through Pipes Or Laid Under Floor Or Through Walls Etc, Complete All As Specified And Directed. 10 Supply, Laying, Jointing, Testing And Commissioning Of Low Tension (Lt) Xlpe Insulated, Armoured, Heavy Duty, Electric Power Cable, Cross Sectional Area 70 Sqmm, 3.5 Core, Aluminum Conductor, 1100 Volts Grade Under Ground Cable Including Both Side Connection With Lugs/Thimbles Of Suitable Size Etc, Laid In Trenches, Along Poles Or Passing Through Pipes Or Laid Under Floor Or Through Walls Etc, Complete All As Specified And Directed. 11 Supply, Laying, Jointing, Testing And Commissioning Of Low Tension (Lt) Xlpe Insulated, Armoured, Heavy Duty, Electric Power Cable, Cross Sectional Area 25 Sqmm, 4 Core, Aluminum Conductor, 1100 Volts Grade Under Ground Cable Including Both Side Connection With Lugs/Thimbles Of Suitable Size Etc, Laid In Trenches, Along Poles Or Passing Through Pipes Or Laid Under Floor Or Through Walls Etc, Complete All As Specified And Directed. 12 S&F Galvanised Steei Tubing, Light Grade, 40Mm Bore, For Cable Protection, Fixed To Pole/Wall With Ms Clamps, Nuts, Bolts Etc Or Laid Under Floor/Road/Pavement Complete All As Specified And Directed. 13 S&F Galvanised Steei Tubing, Light Grade, 80Mm Bore, For Cable Protection, Fixed To Pole/Wall With Ms Clamps, Nuts, Bolts Etc Or Laid Under Floor/Road/Pavement Complete All As Specified And Directed. 14 M&L For Complete Earthing With Galvanised Mild Steel Earth Plate Electrode Of Size 600X600X6Mm Thick, Burried Directly In Ground (Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level) With Top Edge Of The Earth Plate Not Less Than 1.5 Mtr Below Ground Level Connected To Galvanised Earth Lead Wire 4Mm Dia (8 Swg) By Means Of Nut, Bolt, Check Nuts And Washer Of Galvanised Iron Including Pcc Pit In Pcc 1:2:4 Type B-1, Precast Rcc Cover Slab Using Reinfocement With Xpm Weighing Not Less Than 1.87 Kg/Sqm With Suitable Handle Made Of 12Mm Round Bar Including Necessary Excavation And Earth Work In Any Type Of Soil, 20Mm Dia Medium Grade Galvanised Steel Tube For Watering With One End Fixed With Cast Iron Funnel And Wire Mesh ,15Mm Dia Light Grade Galvanised Steel Tubing Upto 7.5 M Length For Drawing Earth Lead Wire Protection, Common Salt, Charcoal, Etc Complete All As Shown In Electrical Plate No 3 Of Ssr Part-I And Testing On Completion Complete All As Specified And Directed .. 15 S&F 6 Sqmm, 2 Core, Pvc Insulated Aluminium Conductor Flexible Industrial Cable, Pvc Sheathed, 1100 Volts Grade, From Junction Box/Overhead Conductor To Street Light Pole Complete All As Specified And Directed 16 S&F Street Light Bracket Fabricated Out Of Gi Tubing, Medium Grade, 40Mm Bore, Bend To The Shape As Directed And Of Length 1.2 Mtr Complete With Mounting Ms Clamp Made Of Flat Iron 25 X 3 Mm Of Suitable Length Including Nuts, Bolts Etc Of Suitable Size And Painting Of Ms Clamps With Two Coats Of Aluminum Paint Over One Coat Of Red Oxide Primer Complete All As Specified And Directed . 17 S&F Junction Box Of Size 250 X 200 X 100 Mm, Out Door Type, Ip65, Made Out Of Polycarbonate With Glass Fiber Re-Inforced, Suitable For 3 Phase, 415 Volts, Pole Mounting Consisting Of Aluminium Bus Bar Strip 15Cm X 3Mm, 4 Nos Fixed On Porcelain Or Epoxy Terminal / Insulators And Provision For Incoming/Outgoing Cables With Gromats Including In Built 6 Amp Mcb, Sp, 10Ka Complete All As Specified And Directed . 18 S&F Bollard Light 10 Watts, 240 Volts, Ip 65, 360 Degree Light Distribution, Die Cast Aluminium Powder Coated Housing With Frosted Pc Diffuser Including Fixing With Metal Sleeve Anchor Fastners & Bolts Of Suitable Size & Numbers In Plain Cement Concrete Complete All As Specified And Directed. 19 S&F Post Top Light 40 Watts, 360 Degree, 240 Volts Ip 66 , Die Cast Aluminium Housing Powder Coated Housing With Frosted Pc Diffuser Including Fixing With Metal Sleeve Anchor Fastners & Bolts Of Suitable Size & Numbers In Plain Cement Concrete Complete All As Specified And Directed. 20 S&F Led Street Lighting 60W, Ip66, New Generation Energy Saving & Environmental Friendly Long Life Versatile Pressure Die-Cast Aluminium With Lens And Toughened Glass Type Roadway Luminaire With High Power Leds As Light Source Including Electronic Driver 60W Led 6000K Complete All As Specified And Directed. 21 S&F Led Street Lighting 70W, Ip66, New Generation Energy Saving & Environmental Friendly Long Life Versatile Pressure Die-Cast Aluminium With Lens And Toughened Glass Type Roadway Luminaire With High Power Leds As Light Source Including Electronic Driver 70W Led 6000K Complete All As Specified And Directed. 22 S&F Automatic Street Light Switch Using Nature Switch For Automatic Switching Of Street Lights Based On Lux Level Of Natural Light The Sensor (Nature Switch) Along With Suitable Power Contactors And Mcbs (Input-Output) Should Be Enclosed In Pole/Wall Mountable Enclosure Made Of Rust Proof, Electric Shock Proof, Termite Proof And Fr Grade Smc Junction Box (Sintex Make) Conforming To Ip 66.The Contactor,Mcbs And Copper Circuit Wiring (Min.16Sqmm) Should Enough To Take: Three-Phase Load Of 12Kw;Contactor Rating 80Amps; Mcb(Spn) Rating 80Amps.Make:-Nature Switch :Kakatiya Energy Systems Pvt.Ltd. Hyderabad/Bajaj/Healer. Contactor:- Bch/L&T/Schneider Or Equivalent (As Per Iec-60947-4-1/Is-13947-4-1), Mcbs(Input-Output):Hager/ Schneider/ L&T/Bch Or Equivalent (As Per Iec-60898/Is-8828),Circuit Wiring : Finolex/Polycab/Rr Kable Or Equivalent. Model No Swadeep-66-12Kw3P. 23 M&L For Bus Bar Chamber Of Size 750 X 600 X 500 Mm Outdoor Typr, Pedestal Type, Factory Made, Powder Coated, Made Out Of 3.15 Mm Thick Crca Sheet, Dust And Vermin Proof Complete With Openable Shutter In Front And Rear Having Proper Locking Arrangement, Duly Powder Coated With 250 Amp, 415V, 4 Pole, Mccb 36 Ka As Incommer Control And Including 500 Amps, 4 Pole Aluminium Bus Bar Mounted On Insulator, Suitable For 3 Phase, 415 Volts, 50 Hz Ac Supply Including Control Wiring To Panel With Suitable Size Of Pvc Insulated And Sheathed Copper Cable, Duly Mounted On Frame Of Angle Iron Size 50X50X6 Mm Including Necessary Pcc, Earth Work In All Respect With Phase Indicator Lamps (R, Y. B) – 01 Set. Complete All As Specified And Directed. 24 M&L For Bus Bar Chamber Of Size 750 X 600 X 500 Mm Outdoor Typr, Pedestal Type, Factory Made, Powder Coated, Made Out Of 3.15 Mm Thick Crca Sheet, Dust And Vermin Proof Complete With Openable Shutter In Front And Rear Having Proper Locking Arrangement, Duly Powder Coated Including 300 Amps, 4 Pole Aluminium Bus Bar Mounted On Insulator, Suitable For 3 Phase, 415 Volts, 50 Hz Ac Supply Including Control Wiring To Panel With Suitable Size Of Pvc Insulated And Sheathed Copper Cable, Duly Mounted On Frame Of Angle Iron Size 50X50X6 Mm Including Necessary Pcc, Earth Work In All Respect With Phase Indicator Lamps (R, Y. B) – 01 Set. Complete All As Specified And Directed. 25 M&L For Bus Bar Chamber Of Size 750 X 600 X 500 Mm Outdoor Typr, Pedestal Type, Factory Made, Powder Coated, Made Out Of 3.15 Mm Thick Crca Sheet, Dust And Vermin Proof Complete With Openable Shutter In Front And Rear Having Proper Locking Arrangement, Duly Powder Coated With 100 Amp, 415V, 4 Pole, Mccb 36 Ka As Incommer Control And Including 500 Amps, 4 Pole Aluminium Bus Bar Mounted On Insulator, Suitable For 3 Phase, 415 Volts, 50 Hz Ac Supply Including Control Wiring To Panel With Suitable Size Of Pvc Insulated And Sheathed Copper Cable, Duly Mounted On Frame Of Angle Iron Size 50X50X6 Mm Including Necessary Pcc, Earth Work In All Respect With Phase Indicator Lamps (R, Y. B) – 01 Set. Complete All As Specified And Directed. 26 Supply And Installation Galvanised Steel High Mast Lighting System Of 16Mtr In Two Segments, 3Mm Section Thickness With 2/3 Including 3 Phase Motor Of Suitable Capacity With Wire Rope System, Including 08 Nos 200W Led Flood Lights With All Connecting Accessories For Smooth Functioning & Lighting, Including Motor & Light Controlling Panel, Rcc Foundation With Suitable Drawing & All Connecting Nut Bolts Required For Its Foundation Complete All As Specified And Directed.(A) General Specification(I) Height Of Mast -16 Mtrs, (Ii) Material Of Construction : Bs En 10025/Is 2062, (Iii) Thickness Of Material - Top Section 3Mm, Bottom Section 4 Mm, (Iv) Cross Section Of Mast (Number Of Sides)-20 Sided Polygon, (V) Length Of Individual Section - Top Section : 8.35 Mtrs, Bottom Section : 8.35 Mtrs, (Vi) Diameter - Base Dia : 460Mm, Top Dia : 150Mm, (Vii) Types Of Joints - Stress Slip Fit Joints, (Viii) Length Of Overlap-1.5 Times The Dia Of Intersection, (Ix) Metal Protection Treatment - Hot Dip Galvanised As Per Is 4759/Is 2629,(X) Thickness Of Galvanistaion - Average 70 Micros, (Xi) Size Of Door Opening At Base Of Mast - 1200Mm X 300Mm, (Xii) Types Of Locking On Door Panel - Close Fitting Door With Allen Key Locking With Suitable Reinforcement To Avoid Buckling At Base Of Mast. (Xiii) Lightening Protection Finial - Gi Single Spike Of Length 1200Mm, (Xiv) Size Of Base Plate - Dia : 670Mm, Thickness : 30Mm,(B) Dynamic Loading As Prevailing At Site (I) Max Wind Speed : 180 Km/Hr (Ii) Number Of Foundation Bolts -08 Nos (Iii) Pcd Of Foundation Bolts - 590Mm (Iv) Dia Of Foundation Bolts - M30, (V) Lenght Of Foundation Bolts - 850Mm(C) Lantern Carriage (I) Material Of Construction - 40 Nb/ Erw Ckass B-Ms Pipe, (Ii) Dia Of Lantern Carriage Ring -800Mm (Id) (Iii) Construction - 9 Arms Welded (Iv) Number Of Joints - 2 Segments (V) Load Carrying Capacity - 16 Lumainaries, Symmerical(D) Winch : (I) Number Of Drums Per Winch - Double Drum (Ii) Gear Ratio - 50:1 (Iii) Capacity Swl750Kgs (Iv) Method Of Operation - Motor Or Manual (V) Lubrication Arrangements - Self Lubricating In Permanent Oil Bath (Vi) Type Of Lubricant - Sae 90/140 27 M&L For Complete Earthing With Galvanised Mild Steel Earth Plate Electrode Of Size 600X600X6Mm Thick, Burried Directly In Ground (Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level) With Top Edge Of The Earth Plate Not Less Than 1.5 Mtr Below Ground Level Connected To Gi Strip 32X6Mm By Means Of Nut, Bolt, Check Nuts And Washer Of Galvanised Iron Including Pcc Pit In Pcc 1:2:4 Type B-1, Precast Rcc Cover Slab Using Reinfocement With Xpm Weighing Not Less Than 4.00 Kg/Sqm With Suitable Handle Made Of 12Mm Round Bar Including Necessary Excavation And Earth Work In Any Type Of Soil, 20Mm Dia Medium Grade Galvanised Steel Tube For Watering With One End Fixed With Cast Iron Funnel And Wire Mesh ,40Mm Dia Medium Grade Galvanised Steel Tubing Upto 7.5 M Length For Drawing Earth Strip Protection, Common Salt, Charcoal, Etc Complete All As Shown In Electrical Plate No 3 Of Ssr Part-I And Testing On Completion Complete All As Specified And Directed. 28 S&F Multi Core Round Pvc Insulated Aluminium Conductor (Flexible) Industrial Cables Pvc Sheathed , 1100 Volts Of Size 2.5 Sqmm, 3 Core From Panel To Street Light Inside/Outside Pole Complete All As Specified.. 29 S&F Thermoplastic Polystyrene Polycarbonate Junction Box Of Size 250 X 180 X 110 Mm, Shock Proof With Ip 66 Protection With Provision Of All Side Cable Entry Through Gland With Suitable Connector For Three Phase Loop In Loop Out Branch Out And Vibration Proof Connection And Fixing On Lt/Ht Poles Using Ms Clamp Made Out Of 25Mm X 3Mm Ms Flat (02 Nos) And Nuts & Bolts Of Required Size Complete All As Specified And Directed .
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in any type of soil, not exceeding 1.5m deep and 1.5m wide for foundation etc or manholes, piers , shafts etc not exceeding 10 Sqm on plan & not exceeding 1.5m in depth and getting out complete all as specified and directed. |
| 2 | Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed |
| 3 | Removing excavated material to a distance n.exc 50m & depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. |
| 4 | M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment. |
| 5 | M&L for factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed. |
| 6 | Supply & erecting in truly vertical position steel tubular swaged poles, type 410 SP-31(9.00 meters long) complete with cast iron base plate, finial taper plug, bolts, nuts & screws, including marking pole numbers in a 15 cm dia yellow circle with number writting with black synenthic paint/ Stricker including painting strips in alternate from bottom to top with three strips of white synthetic enamel paint & two strips of Yellow/ black paint throughout the circumference of pole including one coat of lime wash on PCC copping of pole complete all as specified and directed.. |
| 7 | M&L for plain cement concrete 1:4:8, type D2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed . |
| 8 | M&L for plain cement concrete1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in coping of poles,stay assembly, plate form of transformer etc including weathering, slightly rounded or chamfered angle and throating, necessary form work and fair finishing all exposed faces of concrete without using extra cement complete all as specified and directed |
| 9 | Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and directed. |
| 10 | Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 70 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and directed. |
| 11 | Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 25 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and directed. |
| 12 | S&F Galvanised steeI tubing, light grade, 40mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed. |
| 13 | S&F Galvanised steeI tubing, light grade, 80mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed. |
| 14 | M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed .. |
| 15 | S&F 6 sqmm, 2 core, PVC insulated aluminium conductor flexible industrial cable, PVC sheathed, 1100 volts grade, from junction box/overhead conductor to street light pole complete all as specified and directed |
| 16 | S&F street light bracket fabricated out of GI tubing, medium grade, 40mm bore, bend to the shape as directed and of length 1.2 mtr complete with mounting MS clamp made of flat iron 25 x 3 mm of suitable length including nuts, bolts etc of suitable size and painting of MS clamps with two coats of aluminum paint over one coat of red oxide primer complete all as specified and directed . |
| 17 | S&F Junction box of size 250 x 200 x 100 mm, out door type, IP65, made out of polycarbonate with glass fiber re-inforced, suitable for 3 phase, 415 volts, pole mounting consisting of aluminium bus bar strip 15cm x 3mm, 4 Nos fixed on porcelain or epoxy terminal / insulators and provision for incoming/outgoing cables with gromats including in built 6 Amp MCB, SP, 10KA complete all as specified and directed . |
| 18 | S&F Bollard light 10 Watts, 240 Volts, IP 65, 360 degree light distribution, die cast aluminium powder coated housing with frosted PC diffuser including fixing with metal sleeve anchor fastners & bolts of suitable size & numbers in plain cement concrete complete all as specified and directed. |
| 19 | S&F Post Top light 40 Watts, 360 degree, 240 volts IP 66 , die cast aluminium housing powder coated housing with frosted PC diffuser including fixing with metal sleeve anchor fastners & bolts of suitable size & numbers in plain cement concrete complete all as specified and directed. |
| 20 | S&F LED street lighting 60W, IP66, New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 60W LED 6000K complete all as specified and directed. |
| 21 | S&F LED street lighting 70W, IP66, New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 70W LED 6000K complete all as specified and directed. |
| 22 | S&F automatic street light switch using Nature Switch for automatic switching of street lights based on LUX level of natural light the sensor (nature switch) along with suitable power contactors and MCBs (Input-output) should be enclosed in pole/wall mountable enclosure made of rust proof, Electric shock proof, termite proof and FR grade SMC junction box (sintex make) conforming to IP 66.the contactor,MCBs and copper circuit wiring (min.16sqmm) should enough to take: three-phase load of 12KW;contactor Rating 80Amps; MCB(spn) Rating 80Amps.MAKE:-Nature switch :Kakatiya energy systems pvt.ltd. hyderabad/bajaj/healer. Contactor:- BCH/L&T/Schneider or equivalent (as per IEC-60947-4-1/IS-13947-4-1), MCBs(Input-output):Hager/ schneider/ L&T/BCH or equivalent (as per IEC-60898/IS-8828),Circuit wiring : Finolex/polycab/RR Kable or equivalent. Model no SWADEEP-66-12KW3P. |
| 23 | M&L for Bus bar chamber of size 750 x 600 x 500 mm outdoor typr, pedestal type, factory made, powder coated, made out of 3.15 mm thick CRCA sheet, dust and vermin proof complete with openable shutter in front and rear having proper locking arrangement, duly powder coated with 250 Amp, 415V, 4 pole, MCCB 36 KA as incommer control and including 500 Amps, 4 pole Aluminium bus bar mounted on insulator, suitable for 3 phase, 415 volts, 50 Hz AC supply including control wiring to panel with suitable size of PVC insulated and sheathed copper cable, duly mounted on frame of angle iron size 50x50x6 mm including necessary PCC, earth work in all respect with phase indicator lamps (R, Y. B) – 01 Set. complete all as specified and directed. |
| 24 | M&L for Bus bar chamber of size 750 x 600 x 500 mm outdoor typr, pedestal type, factory made, powder coated, made out of 3.15 mm thick CRCA sheet, dust and vermin proof complete with openable shutter in front and rear having proper locking arrangement, duly powder coated including 300 Amps, 4 pole Aluminium bus bar mounted on insulator, suitable for 3 phase, 415 volts, 50 Hz AC supply including control wiring to panel with suitable size of PVC insulated and sheathed copper cable, duly mounted on frame of angle iron size 50x50x6 mm including necessary PCC, earth work in all respect with phase indicator lamps (R, Y. B) – 01 Set. complete all as specified and directed. |
| 25 | M&L for Bus bar chamber of size 750 x 600 x 500 mm outdoor typr, pedestal type, factory made, powder coated, made out of 3.15 mm thick CRCA sheet, dust and vermin proof complete with openable shutter in front and rear having proper locking arrangement, duly powder coated with 100 Amp, 415V, 4 pole, MCCB 36 KA as incommer control and including 500 Amps, 4 pole Aluminium bus bar mounted on insulator, suitable for 3 phase, 415 volts, 50 Hz AC supply including control wiring to panel with suitable size of PVC insulated and sheathed copper cable, duly mounted on frame of angle iron size 50x50x6 mm including necessary PCC, earth work in all respect with phase indicator lamps (R, Y. B) – 01 Set. complete all as specified and directed. |
| 26 | Supply and installation galvanised steel high mast lighting system of 16mtr in two segments, 3mm section thickness with 2/3 including 3 phase motor of suitable capacity with wire rope system, including 08 Nos 200W LED flood lights with all connecting accessories for smooth functioning & lighting, including motor & light controlling panel, RCC foundation with suitable drawing & all connecting Nut bolts required for its foundation complete all as specified and directed.(a) General specification(i) Height of mast -16 mtrs, (ii) Material of construction : BS EN 10025/IS 2062, (iii) Thickness of material - Top section 3mm, bottom section 4 mm, (iv) Cross section of mast (number of sides)-20 sided polygon, (v) Length of individual section - Top section : 8.35 mtrs, Bottom section : 8.35 mtrs, (vi) Diameter - Base dia : 460mm, top dia : 150mm, (vii) Types of joints - stress slip fit joints, (viii) Length of overlap-1.5 times the dia of intersection, (ix) Metal protection treatment - Hot dip galvanised as per IS 4759/IS 2629,(x) Thickness of galvanistaion - average 70 micros, (xi) Size of door opening at base of mast - 1200mm x 300mm, (xii) Types of locking on door panel - Close fitting door with allen key locking with suitable reinforcement to avoid buckling at base of mast. (xiii) Lightening protection finial - GI single spike of length 1200mm, (xiv) Size of base plate - Dia : 670mm, thickness : 30mm,(b) Dynamic loading as prevailing at site (i) Max wind speed : 180 Km/hr (ii) Number of foundation bolts -08 Nos (iii) PCD of foundation bolts - 590mm (iv) Dia of foundation bolts - M30, (v) Lenght of foundation bolts - 850mm(c) Lantern carriage (i) Material of construction - 40 NB/ ERW CKASS B-MS PIPE, (ii) Dia of lantern carriage ring -800mm (ID) (iii) Construction - 9 arms welded (iv) Number of joints - 2 segments (v) Load carrying capacity - 16 lumainaries, symmerical(d) Winch : (i) Number of drums per winch - double drum (ii) Gear Ratio - 50:1 (iii) Capacity SWL750Kgs (iv) Method of operation - Motor or manual (v) Lubrication arrangements - Self Lubricating in permanent oil bath (vi) Type of lubricant - SAE 90/140 |
| 27 | M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to GI strip 32x6mm by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 4.00 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,40mm dia medium grade galvanised steel tubing upto 7.5 m length for drawing earth strip protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed. |
| 28 | S&F multi core round PVC insulated aluminium conductor (flexible) industrial cables PVC sheathed , 1100 volts of size 2.5 Sqmm, 3 core from panel to street light inside/outside pole complete all as specified.. |
| 29 | S&F thermoplastic polystyrene polycarbonate junction box of size 250 X 180 X 110 mm, shock proof with IP 66 protection with provision of all side cable entry through gland with suitable connector for three phase loop in loop out branch out and vibration proof connection and fixing on LT/HT poles using MS clamp made out of 25mm x 3mm MS flat (02 Nos) and nuts & bolts of required size complete all as specified and directed . |
| 30 | S&F multi core round PVC-FRLSH insulated aluminium conductor (flexible) industrial cables PVC sheathed , 1100 volts of size 2.5 Sqmm, 4 core from panel to street light inside/outside pole complete all as specified.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender